I have bluetoothd, hidd, and bluez-simple-agent running. I click my mouse, and bluez-simple-agent never asks to authenticate or for a PIN. Before, bluez was working for me. It broke when I paired my mouse to a LiveCD session of Ubuntu Lucid Lynx.using bluez 4.71
View 3 Replies
I spend all day, trying to make bluetooth working with my phone Nokia 2600. First, i try'it with bluez-utils 3.7, and later with 3.9, but i no luck. So, what i have. I use hcitool to scan for my device, and find'it. Next, i connect to my phone with success. Then i try pairing with my phone, using "auth", but here i got error: HCI authentication request failed: Input/output error
View 1 Replies View RelatedIf I use my bluetooth apple Mighty Mouse in a LiveCD of Ubuntu, or in mac OSX, when I next boot linux from disk, the mouse won't connect to it. I do not know if it is something about the mouse that is changing or if it is something on the linux side. This has just happened to me again, and I am sure that the mouse was working before.
View 2 Replies View RelatedI've just set up dual boot Win 7 with openSUSE 11.2 but unfortunately I have run into a couple of problems. One of them is that I cannot set up my Bluetooth mouse, which works under windows.
I am typing this from Windows right now (wireless is not working either) so I cannot reproduce the exact steps but anyways, when I try to add a new Bluetooth device it first finds my mouse, and keeps searching, and then removes the mouse from the list, and keeps searching, then it finds it again, ... and it goes endlessly. If I select mouse on the list and click forward on the next screen I get an error saying that the mouse was not set up.
How to attach dell bluetooth mouse in ubuntu?
View 1 Replies View RelatedI have an issue with a bluetooth mouse. The mouse connects with the pc normally, and the bluetooth manager reports that the bluetooth device sends data. However, the mouse does not move the pointer, or seems to do any kind of effect on the pc.
View 1 Replies View RelatedI have a MS bluethooth keyboard/mouse, and a USB bluetooth dongle
In 10.1 I can add both with no problems - but I have to explicitly tell ubuntu to connect to the devices at each machine reboot, which means plugging in a wired mouse first
Does anyone know how I can set the machine to connect automatically at every startup to both my keyboard and my mouse? I found a set of instructions here:
[URL]
But it is from 2007 and I'm not sure its still correct?
I've just upgraded my Ubuntu installation to 11.04 and my bluetooth mouse (Logitech Bluetooth Laser Travel Mouse) is not correctly recognized at start-up. Every time I restart my computer I have to run the following commands in a terminal
Code:
sudo killall bluetoothd
sudo bluetoothd
and then remove and set up the bluetooth mouse (using an auxiliary USB mouse, of course ) through the bluetooth preferences dialogue.how to carry out the remove/set-up process using a non-interactive shell script?
How do I have Xorg recognize a freshly connected bluetooth mouse after X is already running. It is in my ServerLayout section, but sometimes is not connected at boot.
View 6 Replies View RelatedI'm running Debian squeeze on a Fujitsu Lifebook AH550 under kernel revision 2.6.37. For the most part, everything is good, but I can't get my Verbatim Bluetooth mouse (model 96991) to work. It's fine with the Debian 2.6.32 kernel, so I know that the hardware is recognized and any required configuration files are in place. I've evidently missed some kernel configuration parameter, unless perhaps some driver has changed since 2.6.32 which renders my mouse incompatible.If I run bluetooth-properties, I can see that a mouse is configured. I've tried removing that device and adding a new device. The mouse is found immediately, and, according to the dialog, is configured successfully.
View 7 Replies View RelatedI have a laptop. . .Dell 1150. Ubuntu installed, bluetooth device installed and my bluetooth keyboard and mouse works like a charm. I decided to load up my same exact Ibuntu on my desktop, use the same keyboard on it, and the mouse too. I tested it on the laptop, just in case it would not work in Ibuntu, and I didn't want to wipe out my Windows XP on my desktop and find out Ibuntu would not work on it with a wireless keyboard. Since it worked very well with my laptop, I figured it would work just as good with my desktop. I wiped my desktop out, and installed Ibuntu. Everything worked fantastic. Until I tried to install the bluetooth.
When I plug in my Bluetooth device, Ibuntu finds it and asks to set up your device. I attempt to set up my keyboard/mouse combo and it asks for a 6 digit code (like it is supposed to). I enter the code and press enter. From here, the problem starts. Ubuntu "claims" to connect to the keyboard, shows it connected, but my keyboard does not work at all. Neither does the mouse that is built into the keyboard. I type and nothing happens. This also brings up (sometimes) another message that says my keyboard is trying to connect to the bluetooth device please enter keyboard PIN. Well.
I can't enter anything, because the keyboard does not work! The mouse does not work! I can (without any problems) disconnect and connect to my laptop, but I can't do this to my desktop. Both are dell units. Desktop is about 3 years old, laptop is about 8 years old. Both running Ubuntu, the latest version. Both recognize the bluetooth transceiver. I have tried different USB ports on the desktop with no avail. I would really like to use my desktop as a unit to my TV with a wireless keyboard, not my laptop. It is much faster, more memory, and I can use the TV as a monitor.
I was in 2.6.38.-2-amd64 and it was upgraded to 2.6.39-2-amd64. After the upgrade, every reboot disables the bluetooth mouse. There is a message from the panel with a bluetooth icon
Bluetooth Device
Authorization request from Logitec mouse...
check authorization
I push the buttons on my mouse and the button on the dongle to try and get them to pair, but, the dongle does not work. It is not scanning when I push the connect button.I unplug the usb dongle, and plug it in again, and this time I am able to pair them, and the mouse works. But, I have to do this every time I reboot which is a pain. I found that in the previous kernel, The Bloothtooh package is 4.91-1, but it has been upgrade to 4.91-2. So, this is creating the problem.
After upgrading F14 -> F15 bluetooth (mouse/keyboard) are not working. With F14 there was no problems.
lsusb gives:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
I tried to do a clean install of Ubuntu 10.04, but when I get to the screen if I want to test or install Ubuntu, the keyboard and mouse (bluetooth) don't work. I tried to resync the peripherals, I disconnected usb connector base of the tower and putting it back but nothing works for me. I have a Logitech Desktop MX 5000 (Bluetooth).
View 9 Replies View RelatedI'm working with Ubuntu 10.04 x64 + Asus 1201N + Media-Tech MD1083 RELOADED bluetooth mouse. Gnome Bluetooth Applet has setup mouse perfectly except scrolling. Even back&forward buttons seem to work fine but the scroll wheel does not work at all.
In "xev" I can see that scrolling does not produce any events.
Im using a Samsung R420/R470 laptop with Broadcom bluetooth and a Prolink PMO624B mouse.My mouse works when I add it as a new device, but if I off the mouse and on it again, the mouse does not auto connect. I have to press and hold the connection button under the mouse and reconnect to the mouse.The mouse says that it is linux compatible, so I guess its a problem with my bluetooth drivers.
View 3 Replies View RelatedI've paired a bluetooth keyboard and mouse with my machine using the Gnome bluetooth wizard and the keyboard and mouse work fine. Then, if I let the computer sit for a few hours and then try to use the keyboard or mouse, nothing happens. When paired with my windows machine, and I start using the keyboard and mouse after a hour or two, the keyboard takes a second or two to start working again. I suspect that it turns itself off, and then has to reconnect, and that in Linux, the reconnection isn't working properly. I've found other instances on the forums of people with the same symptoms, but never any clear answers. Does anyone know what's going on?
View 1 Replies View RelatedI've installed CentOS 5.6 to my laptop, primarily to use some simulation programs. With much help of google I'm getting my hardware and software to work quite well, but I still have some troubles.My first problem is my Synaptics-Touchpad. It is extremely sensitive and I am not able to scroll. Is there any application which allows me to configure it properly? Before CentOS, I've tried openSUSE 11.4, where there was an application especially for configuring synaptics touchpad (dont't remember the name though). In general, the "feeling" of the touchpad was way much better under openSUSE, but I can't define that properly. I have a bluetooth mouse (Dicota Blue Light) conntected to my laptop, which is working fine except for the scroll wheel, which doesn't work at all. How can I activate it?
View 3 Replies View RelatedI recently upgraded this machine from Ubuntu Maverick 10.10 to Debian Squeeze, x86_64, by wiping the root partition (I kept my backup and my home partitions). Everything has gone OK except this: for whatever reason I cannot pair my Microsoft Bluetooth Notebook Mouse 5000 with this machine any longer. In bluetooth-applet I can see the mouse when I go to pair it with the machine, but it simply times out and the pairing fails.
The target mouse definitely used to work in Ubuntu, so I doubt it's a problem in the physical layer. I tried another Bluetooth mouse (a Rocketfish/BestBuy POS), and it doesn't pair either. The Microsoft mouse I would like to use pairs just fine with my Debian squeeze laptop, but they're not using identical Bluetooth adapters as far as I can tell. lsusb reports that I've got a Broadcom BCM2210 in my workstation (the subject of this post), and lsusb on my laptop reports some kind of Broadcom Bluetooth adapter, but doesn't report its chipset.I'd really like to stay on squeeze if possible, but my googling for this has only led me to old documentation, or stuff that applies to wheezy or sid.
I'm running Gnome with the bluetooth applet and I have to explicitly use the applet, select the mouse and tell it to connect. It automatically connects just fine when I boot into windows.
I have the same problem with both a Microsoft bluetooth mouse 5000 and a "BLUETOOTH HID v1.02 Mouse [Interlink Bluetooth Mouse]".
i'm using a logitech dinovo keyboard/mouse and was trying to figure out if the device is still in boot mode. I don't see the usb hub listed when i hciconfig and i although the udev rules appear to hid2hci, i cant seem to figure out how in the heck i could be paired when i've never went through the process.. lsusb also shows "boot interface subclass" which im guessing means its in bootmode? Im obviously concerned about this because bootmode isnt encrypted.
[Code]....
I have an ASUS Zenbook UX31E with Debian testing and LXDE as a Desktop environment. I have a Logitech T630 Mouse that I connect through Bluetooth. When the mouse is paired I can use it properly but I get random keys typed in my desktop such as "1", "2" or "/".I am a regular user of Debian, and I have being using the system for several years now even worked as sysadmin for sometime. However I do not have much knowledge about Bluetooth devices management. I found no information on this issue on the internet and I do not know where too look for more info on my own system. Here is some info I got:
Code: Select all:~$ hciconfig -a hci0
hci0: Type: BR/EDR Bus: USB
BD Address: 74:2F:68:CC:5C:74 ACL MTU: 1022:8 SCO MTU: 183:5
UP RUNNING PSCAN
RX bytes:606 acl:0 sco:0 events:36 errors:0
TX bytes:939 acl:0 sco:0 commands:36 errors:0
[code]....
I have tested "blueman-applet" and "bluedevil" as desktops applets and pairing through console gives same results, so it seems like a problem with the bluetooth communication.
I am using Ubuntu 10.04 on a laptop with a Synaptics touchpad. While testing an install of Bluetooth drivers I booted my computer into recovery mode so I could find out if Bluetooth worked before networking was installed. The system reconfigured the graphics to low VGA which disabled the mouse. I rebooted (normal startup) uninstalled the bluetooth drivers, but my mouse still won't work. The mouse pointer appears in the middle of the computer screen, and stays there.Enabling mouse keys support enables me to move the mouse by holding the Function key and pressing numpad characters,t this is only a temporary solution.
View 2 Replies View RelatedI had to change batteries on Rocketfish bluetooth mouse. The mouse re-installed fine, but when I use the mouse I have to double-click to make it work. How can I change it to work on one click?
View 1 Replies View RelatedJust picked up a Microsoft Designer Bluetooth Mouse.Whenever I try to pair it, my system hangs and I have to hard power it down. The mouse is Bluetooth 4.0, but my Bluetooth connectivity is provided by my Intel Wireless 3160 card which does support Bluetooth 4.0.I'm using Blueman as a front end, and one other thing of note is that it shows as "Unknown" after a scan.If I need to return it, I need to return it, but it seems like a good mouse and I'd like to keep it if I can make it work.
I've took this out of syslog:
Code: Select allAug 1 14:58:04 Noah-LEMUR kernel: [ 317.772054] BUG: unable to handle kernel NULL pointer dereference at 0000000000000398
Aug 1 14:58:04 Noah-LEMUR kernel: [ 317.772090] IP: [<ffffffff81569f7e>] mutex_lock+0xe/0x30
Aug 1 14:58:04 Noah-LEMUR kernel: [ 317.772113] PGD 0
Aug 1 14:58:04 Noah-LEMUR kernel: [ 317.772123] Oops: 0002 [#1] SMP
[code]...
I used a live CD burned onto a DVD-RW and it booted up and worked great. So I installed it using the entire hard drive, Ran Update manager, enabled the driver for the wifi card. Before I was using 10.5 with all recent updates done. A few things don't work. It fails whenever I try to connect my Bluetooth mouse and keyboard, CD drive doesn't mount anything, I thought it would bring up the restricted nvidia driver but it doesn't so the video is slow and sketchy.
View 7 Replies View RelatedI upgraded kernel to 3.0.0-0300Cr2 hoping that it would solve bluetooth issues but it did not. Has anyone done the successful installation on iMac and the bluetooth working?
View 1 Replies View RelatedLatest kernel update on 10.04 desktop broke my bluetooth. The icon in the tray has now faded and pushing 'turn bluetooth on' does absolutely nothing. I'm on a Lenovo S10-2 laptop, everything was working perfectly before today's update.
View 6 Replies View Relatedhave you ever used microsoft bluetooth mouse 5000? can you tell me how to configure it in linux or if it is at all useable in linux?
View 1 Replies View RelatedI got home today to find that my KDE login screen would not let me log in. It said the authentication process failed or something and I needed to terminate the screen lock process manually. So I go over to another virtual terminal and try to log in. As soon as I enter my user name, a bunch of errors come up and I am unable to log in. "This can't be good" I think to myself, and reboot.
I am greeted by this error upon booting:
The error says that it says it cannot find /sbin/init. I loaded up a Ubuntu live CD and verified that /sbin/init is indeed present and all my other files still seem to be there. I tried booting into arch fallback on grub but that didn't work either. Midway through the day I SSHed my desktop from my phone and started it doing an upgrade. I was able to login.
