Fedora :: Black Screen When Booted After Kernel Update
Feb 1, 2010
I just rebooted from an yum update, which updated my kernel 2.6.31-something to kernel 2.6.32-whatever-is-up-to-date-in-testing. My disk layout was LVM2+encrypted root. When I rebooted it prompted me for the encryption password as always. After I entered the correct password the loading screen (progress bar) finishes up as usual. Then, the screen is black.
It just stays in console resolution, but its just black. No typing, no chars, no X-mode, no errors, no VT-switches, nothing... just black. I remember to have started at 2.6.27-something and never had to kernel-update problems, so I dont know why it's annoying me now with todays update. I cant work with the machine any more.
View 4 Replies
ADVERTISEMENT
Jan 19, 2010
On a new install of Fedora 12, I did the online update (using PackageKit). However, though the new kernel with images are seen in /etc/boot it still boots into the old kernel:
New-2.6.31.9-174.fc12
Old-2.6.31.5-174.fc12
Code:
$ uname -a
Linux LinuxFedora.HomePC 2.6.31.5-127.fc12.i686.PAE #1 SMP Sat Nov 7 21:25:57 EST 2009 i686
[code]...
View 7 Replies
View Related
Jul 20, 2011
I've got a problem with my Ubuntu Server 11.04 amd64, I think the problem comes from GRUB 2. Here is my problem : I updated my server and I now have Linux 2.6.38-10-server (in addition to 2.6.38-8) and, when I try to boot on version "10", I think I have a Kernel Panic because the screen keeps black and there is no use of the HDD (I can ear it working with version "8"). I also looked at /boot/grub/grub.cfg and I didn't saw any diference between the lines for v10 and those for v8 (except for "8">"10" of course).
I tried with Recovery Mode too, with this result : Loading Linux 2.6.38-10-server... Loading initial ramdisk...
> No use of the HDD (I don't ear it), and it's "frozen", can't do anyting but reboot it by ACPI (nothing happend when hitting "Num Lock") Another question : can we have no submenus in Grub2?
View 9 Replies
View Related
Jul 24, 2009
I just did an update of my Fedora 11 machine, and it required a restart. After restart it will not try to boot up or even show a splash screen. The only thing I see is a black screen with a flashing white cursor.Any ideas on what I can check so I can boot up into Linux again.
View 14 Replies
View Related
May 10, 2010
I just updated from FC 10 to FC 12 via install/upgrade disk, and when re-booted the screen is then black (at the point that it should display logins). I think it may be due to nvidia driver in FC 10 not being upgraded, because I think I compiled it from nvidia rather from yum install. Anybody else have this problem? BTW, it is a dual boot with Win XP, but has never caused a similar problem before.
View 8 Replies
View Related
Sep 1, 2010
yesterday I updated the system, and that involved kernel 2.6.34.6-47.fc13.x86_64. After rebooting, the progress bar goes fine, but when finished the screen flickers a little and goes black. I can't switch to other terminals via Ctrl + Alt + Fx, so I'm using remote access via ssh. I thought it could be nvidia issue, so I updated kmod modules with rpmfusion-nonfree-updates-testing, and when booting nothing complains, but I'm still getting black screen. Xorg log doesn't seems to complain (no errors (EE)).
View 14 Replies
View Related
Jun 25, 2009
I should have know, it's named after a windows "feature".On my laptop (Acer Aspire 5310) Fedora 10 offered me an automatic update to Fedora 11. Because I trust any automatic update Fedora brings to me (it's tested right) I automatically pressed yes. It started some downloads and everything seems to run pretty smooth. Then I had to reboot the computer, press that button as well.... and it reboots into Fedora 10 (untill the end of the bar). After that I have no clue what happens, because before X is started I get a black screen with nothing on it, even ESC doesn't do anything :O I don't even get the "_" to indicate the laptop is doing anything.
View 3 Replies
View Related
Mar 12, 2009
Tried the DVD install for 10. Install went fine other than it take for freakin ever, but after an 1 hour install, the update wanted to install 1675 or so updates. I let those updates install. 5 hours later the updates were done. Rebooted and now it freezes at a blank screen right after the 3 scrolling bars. System is older AMD 3000+, 1 GIG RAM with NVidia 5700 video card.
I did try and search some. But the only thing I could find was something about editing my grub file for a scan=sync setting (the information was basically gibberish to me. No clue what it was talking about or how I would edit a file on a system that won't boot). I tried to recover mode off the live CD. It had some options that said you could type Linux command line arguments, but whenever it got to the sysimage it says Linux isn't a command.
View 2 Replies
View Related
Feb 23, 2010
I'm new to Fedora! My problem is this, I was updating Fedora using yum, the updates were in the process of installing when I got up and tripped over my power cord and of course cut power to my computer killing it and interrupting the installation. I plug my computer back in and boot it back up. I make it to the blue Fedora loading screen with the blank Fedora symbol that fills with white while loading; loads fine but before the user login screen appear Fedora melts down. The screen goes black, the cursor appears with the circle loading timer, and some form of terminal is there were I can enter text but no commands like SU or whatever seems to work.
View 4 Replies
View Related
Mar 6, 2010
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies
View Related
Nov 26, 2009
It appears that I have really messed up my machine. I was trying to get matlab working on FC 11 and I ran into libc.so.6 issues, so I put an older file libc.2.3.1.so in /lib/tls/ directory and created a symbolic link libc.so.6 to see if the application would work. Unfortunately at the same time the system did some updates and the system hung, so I ended up rebooting, but now it gets stuck at boot screen (after grub) with a kernel panic - not syncing: attempted to kill init.I just need a way to get to the directror /lib/tls and delete the link and the older .so file I threw in there. How do I get this accomplished. I cannot get even to a shell from the boot screen.
View 3 Replies
View Related
Jan 19, 2011
Using hd3200 on a lenovo edge 13.
followed this guide to install catalyst 10.12 and everything went fine and drivers got loaded.
Just updated the kernel to the latest version(2.6.35.10-74.fc14.x86_64) and after the reboot, the screen is just blank.
View 4 Replies
View Related
Apr 2, 2011
Did the update today and was setting up the NVidia drivers with the x config and rebooted sounds like it started but screen is black. Is there a way to undo the upgrade.
View 3 Replies
View Related
Aug 2, 2011
I got sick of unity yesterday and tried to install Gnome3. While doing this, i ran apt-get update. I believe that this updated my xorg to 1.1+ (or whatever) making it incompatible with the proprietary ATI drivers I'm running. So I tried a whole bunch of stuff, from reinstalling the drivers from the ttyl1 prompt, to doing startx from the command line and using synaptic to remove the proprietary drivers and install radeon, etc, etc.I think the issue right now is that there are bits of the proprietary driver left that are messing with the open source driver. Whenever I do startx, i get artifacting all over the screen, which never seems to go away.
View 8 Replies
View Related
May 5, 2010
I have a black back ground around my Cairo Dock icons since the kernel update on 5-4. can anyone please tell me how to remove this.
View 1 Replies
View Related
Feb 27, 2011
I recently installed Debian squeeze on one of my older pcs. I have had this computer for a long time with windows so I know there is no hardware issue. About half an hour after being turned on in Debian the computer goes to a black screen and the num lock caps lock and scroll lock keys flash.
View 1 Replies
View Related
Jul 17, 2010
After a fresh install of opensuse 11.3 and a xen-hypervisor and tools (all default install, nothing special) just get a black screen when I try to use kernel-xen. Default kernel runs like a charm. Xen-kernel gives me a black screen just after grub menu.
This is my menu.lst about it:
###Don't change this comment - YaST2 identifier: Original name: xen###
title Xen -- openSUSE 11.3 - 2.6.34-12
root (hd0,2)
[code]...
I have no nvidia card...
View 8 Replies
View Related
Feb 10, 2010
I am getting a black screen on the latest kernel upgrade 2.6.31-20. My computer completely boots up, but goes black after a minute or two. For now, I am booting up with the previous kernel.
View 3 Replies
View Related
Mar 3, 2010
Yesterday I upgraded the kernel from 2.6.24-26-generic to 2.6.24-27-generic (I'm still using Hardy Heron). After upgrade I uninstalled the previous Nvidia driver installation:
Code:
sh NVIDIA-Linux-x86-96.43.13-pkg1.run --uninstall
and did a install with
[code]....
View 4 Replies
View Related
Dec 3, 2010
Recovery mode doesn't work, same problem. Taking the older kernel gives no problem. I have no 3rd party graphics driver installed. 10.04 was a fresh install on this machine. I cannot get a commandline, the screen just shuts down because of a lack of input.
View 5 Replies
View Related
Feb 11, 2010
I installed Karmic and the resolution was lower than I expected. I went to Admin and Drivers and the system stated I needed to activate the Nvidia driver. I did this and the system asked for a reboot.Now after Grub I get a black screen. I can hear things going on in the background and can even guess when to input my password, but all I see is a black screen.
View 1 Replies
View Related
Sep 2, 2010
Yesterday, 9/1/2010, I received a bunch of patch updates for 10.04 (64-bit) and applied them to my laptop (Dell Latitude E6510, Intel Core i5). After they applied, it asked me if I wanted to reboot now or later. I chose later to finish my work and then shut my laptop off. This morning, I turned it on, only to get a black screen during bootup and also during login. I know it's working behind the scenes because I can hear the drum sound when it's ready to login and I can still press the power button and hit enter to shut it down. I tried using Alt+F2->F12 but it would only show a black screen.
My temporary workaround was to hold the shift button during startup to get the grub menu and then select the older 2.6.32-23 kernel to bootup instead of the newer 2.6.32-24. I am able to boot ok in the older kernel and it's working fine, but I don't know what is causing the problem for the newer one and cannot boot into that one.
I believe I was running 2.6.32-24 fine up until I received a bundle of patches to apply to my system. So the question is, is there a way to figure out what patches were applied in yesterday's bundle so I can back them out? If not, how can I fix this so I can run the newer updated kernel?
View 4 Replies
View Related
Mar 17, 2011
After applying an update about two or three days ago, I restarted my system and now I'm getting a black screen at login. I can hear the brief drum sound clip that plays when the login dialog box pops up, but the screen is completely black and I can't see anything. I'm still able to access low graphics mode via the fail-safe option in the recovery mode menu. So far I've tried the following commands in the terminal:
Code:
sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon
sudo apt-get install xserver-xorg-video-ati
sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-
core[code]....
View 9 Replies
View Related
Dec 30, 2010
Just a little background I have a sony vaio VPCZ119X laptop and have been struggling to get all components working under linux especially the intel graphics. I saw that once I upgraded to the latest available kernel release which currently is 2.6.37 rc7. The intel graphics is working, but sometimes when I boot I get a blank/black screen but seems to be lit up. All other functions seem working so for example I am able to login etc just that I dont see anything on the screen.
I have tried the following so far to identify the issue or isolate it:
- Switching to the console screens has no effect, still the black / blank screen.
- Restarting the system does not always immediately get the screen working, sometimes it takes a couple of reboots before the screen is available
- I have a switchable graphics with nVidia I never get this problem when I use the nvidia driver
- I have tried closing the lid etc as suggested in the below post without any change in output, will try further as there are other options available as well The "Black Screen" on Boot I see one difference between both the Xorg log files but I am not able to reason out why this happens hence I will just supply the files here and try not to theorize.
Xorg.0.log - This was the log output when I got the X display working Xorg.o.log.old - This was the log output when the X display was black/blank Also to highlight that I am using the latest kernel release that is still being tested I guess so maybe it is also a bug in the kernel?
View 9 Replies
View Related
Mar 18, 2011
Apology for dual post I realized was in wrong place.Created verified 11.3 live CDInserted, restarted, welcome screen, choices next, I choose installation.Kernel loaded then black blank screen guess you call it a freeze upWindows 7 Home Premium 64-bit Edition Partitioned plenty room
View 9 Replies
View Related
Jun 20, 2010
Now, after restarting my ubuntu, I couldnot boot back into ubuntu.
After reaching the boot menu and choosing the "Ubuntu 9.10, kernel 2.6.31-22-generic" option, I get a new black screen with these in white letters
Boot from (hd0,5) ext3 507cefd1-74f3-489a-920a-d588e36b6476
Error 15 : File not found
Press any key to continue ... _
I had a previous thread which led me to this thread about re-installing an older version of the kernel [url]
How to re-install my kernel?
View 3 Replies
View Related
Dec 20, 2010
So I'm pretty awful at keeping Debian up to date, I guess. I'm using cron-apt to fetch updates every night, then apply them whenever I get around to it. Well, I neglected that last part for a month or two, and after some routine downtime to clear the case of dust, I decided it was time to upgrade. So I ran the command, everything checked out fine, and I was on my merry way. Until a half-hour ago when I accidentally shutdown the computer (I use the same zsh prompt on each computer, so I got them confused.) I turned it back on, only to be greeted with a black screen after all the services started up.
Everything works: ircd, MPD, etc. EXCEPT, of course, X. At first I thought the update broke SLIM, but after checking htop and doing a killall slim, it doesn't appear to be running (the screen remains black.) I hit Control-Alt-f2 to get to get back to a terminal, then tried doing startx, which freezes the computer entirely. All the network services stop, I can't SSH in, etc. It's dead. If I'm not mistaken, Xorg.0.log should say something, but I'm not a huge expert on it. The last line isn't an error, I can tell you that. So what's the deal here? apt-get remove xorg and start over?
View 1 Replies
View Related
Jun 30, 2010
I have just installed the latest update for Ubuntu 10.04, however upon requested restart i now boot to a black screen. the boot sequence is system post, followed by the generic Purple UBUNTU loading screen, following that you just get a black screen.
AMD x64
4Gb RAM
120GB Intel SSD
ATI RAIDON 3650
View 7 Replies
View Related
Sep 2, 2010
My Machine: Lenovo T400 laptop, 9.04 ubuntu
My problem: while working on my laptop the system Offered an update to my ATI video card............so being the nube that I am I said go ahead and install it............yep that f'd it up. it ran for a while then froze up to the point I had to hard boot the machine. on restart the desktop splash/load screen displays but nothing else afterwards. I can get into restore mode and even terminal but can't seem to find anything........there is an autofix video option but that did not work either.
I spent a week loading and configuring this thing and do not want to start back from scratch...........I have too much stuff to lose on a new install. funny thing is that I just had set the system to do a complete backup of the ubuntu instance for tonight so I would have some way to restore this if something happened...........well it happend before the backup ran tonight........go figure.
Is there a way to reload the default system without loosing my files and such? I would just have to load vmware back on and some other programs but I a okay with that.
View 6 Replies
View Related
Sep 3, 2010
I have Ubuntu 10.04 installed on dell inspiron 5150. Original installation was perfect. Wireless Internet worked right away. Screen resolution was perfect. One day, after a month or so, after original installation I got a notification that new updates are available. So, I installed all updates. At the end there was a notification: Update is successful, please reboot. After reboot I got a black screen with the header:
GNU GRUB version 1.98-1ubuntu7(I hope it's not a ubuntu version of windows blue death screen). I could install 10.04 from scratch, but I can not do it after every update.
View 1 Replies
View Related
