Ubuntu / Apple :: Other G4 Users Noticed That Suspend Now Works?
Mar 2, 2010
I havnt, intentionally, addressed this issue (not for initial want of trying), but after having given the matter up for some time, today i closed the lid and was expecting it to go to blank screen, but no it went into suspend (despite not being instructed to do so in power management), crikey i thought here comes a forced shut down and a dicey boot, but lo she woke After an initial second of smeared-up graphics and the sound of the hard disk starting to spin twice in a row, she woke.
On closing the lid again it went to blank screen, a fluke i thought, so i changed the options to suspend when lid closed in power management and tried again, and it worked, again, and again and again. Any other ppc users noticed that suspend now suddenly works?
When I try either one I just get the lock screen where I have to enter my password to return to my session, but the computer never suspends or hibernates.
When I close the lid on my Macbook Pro 5,2 running Ubuntu 10.04 nothing happens.. it doesn't turn off the screen, suspend, hibernate or anything. Everything that i've looked at says to change the setting in power management but there's no option there for what to do when the lid closes. I've also checked out gconf-editor and the setting appear to be right in that... so I don't know what the issue could be.
I have a new, fully updated installation of F12 which won't resume from suspend (to RAM) on my hardware. I also have the Ubuntu Karmic Live CD which does suspend/resume perfectly on the same box. So, I'd like to try and find out what Ubuntu is doing to make it work and configure my F12 to do the same.
My system does not power off completely after I trigger the "suspend to disk" function. The monitor gets blank and the usb-mouse does not light anymore, but the power led is still on and the pc fans can be heared. Interestingly, neither pressing the power button nor the reset button starts the pc in this state. I have to unplug the electrical power and then press the power button. After that, the system resumes nicely from the hibernation state as it should. I know that the hardware itself is capable of powering off because it worked perfectly before with opensuse 10.2, and I didn't change any bios settings either. I tried the option acpi=force, but to no avail.
having no luck with 9.10 i am wondering what linux is recommended that actually works? ie no internet problems with videos etc. ie recognising cd and dvd and playing them back. ie a cd/dvd drawer that opens and waits until it's told to close instead of chomping discs. ie no colour issues. ie better than 800+600 resolution without having to stick a new graphics card in place of the stock card? etc etc, ie something that works and means i don't have to buy a new apple os. this is the machine i have running, apple power macintosh g4 450 dp (gigabit) [url]
I installed ubuntu on a G3 iBook using this guide: [URL] (because its a slow a** laptop). I'm almost certain that it never ever prompted me to set up a username or password. I'm almost certain because I've installed linux on a good number of different systems and I use the same exact username and password every time.
But I was kind of shocked when it prompted me for a login and password and I'm thinking to myself "uhhhhh.... I didn't set up a user yet...". So I tried my usual login and nope... "Login incorrect". I can't do anything because I'm not logged in... and I can't use recovery mode either because its PPC or because its a Mac so there is no GRUB.
I've been a Linux user for some time. I was originally a Debian user & had switched from Debian to Ubuntu around Breezy Badger. I recently acquired a PowerBook G4, Its an amazing machine and I can see why Apple users are Apple users. Its been alot of fun familiarizing myself with OSX but I dual booted with the latest release of Ubuntu so I could also feel at home. After installing Ubuntu 10.10 I started installing software, I couldnt find appmenu-gtk anywhere. So I searched google for about an hour to find no answers.
So is it that appmenu is not available for PPC edition of Ubuntu? Why is this? & Will we ever see it for PPC?
If this is the case, what other software isnt available for PPC?
I recently installed 10.10 on a Mac Powerbook G4. Everything seems to be working ok, except I cannot access the Users and Groups. If I try to launch it from the terminal I get the following error: "Glib-GIO-ERROR **: Settings schema 'org.gnome.system-tools.users' is not installed"
This is a clean install, with no changes made to the system. I then ran all the waiting updates and am still experiencing this problem.
I just finished installing Lucid Lynx on an iMac7,1. I would like to still be able to access my Mac Documents directory from within Ubuntu, so I can have a common directory that both systems can access. Right now, however, I am unable to do that. It looks like it might be a permissions issue- ie I am a different 'user' on both systems, so I don't have access to my Mac files. Is there a way to have the same 'user' account for both systems? If not, could a common 'group' be created in both systems that both of my 'user' accounts have access to?
I've been living a dormitory for a while and our net connection is very slow because of the download via torrent or rapidshare, hotfile etc.(we have 4megabit speed unfortunately) I want to establish a ubuntu server and there are 45 people in our dormitory. Which ubuntu server version I'll use? How much storage that I have (i thought 4 tb is enough)? What kind of commands do I going to use and permissions. I want to appoint one person as a admin others just can add a file (music, movies vs.) they wouldnt have to delete!
I'm using a Ubuntu Desktop 10.04 32-bit machine as my file server. It is sharing a few folders stored on a USB NTFS drive using Netatalk. The client machine is running MacOS 10.6.4. I have only one user on the Ubuntu machine, but the Mac machine has two users. I wish to share the same network share between the two Mac users, while both are logged in (they switch between one another without logging the other one out).
I created a login item on both Mac user accounts to automount the Ubuntu shared folder and used the same Ubuntu user account for authentication on both Mac accounts. This is the problem: When the first Mac user logs in, the shared folder automatically mounts with no problems. However, when the second user switches to their account (without logging out the first user) the automount mounts the folder with a red "No Access" sign on the folder. The only way to resolve it is to eject the mount and manually remount.
This is not the end of the world, but I would like to resolve this issue if possible, so that the users get a smoother experience. The way I tried to resolve this: I thought that maybe Netatalk does not allow the same user to connect more than once from the same IP, so I set up an additional user on the Ubuntu machine. when I connect to the Ubuntu server using the new user for authentication, the only share available for the user is their home folder. The other shares are not available.
I therefore tried to configure permissions using the AppleVolumes.default by explicitly giving all users the "allow" permission for all shares and restarting the Netatalk service, however the new user still has access to nothing but their home folder. How can I share the same shared folder between multiple users?
Just to confirm - I have come to the conclusion that it is best to have separate Ubuntu installations if users of the same computer have different default firewall blocking needs. Me and my wife have totally different Internet surfing habits. I also tend to block most of the websites that she normally uses, some of which are dialed by default when opening Firefox.
We have used one desktop computer for a while now with two users in one Ubuntu installation. It is becoming too much of a hassle having to change the firewall settings each time it was changed by the other user with a previous log-on. We also have two other computers in the household for the children. I have created a Local Repository, and download updates only on my computer, saving on time and bandwidth (the only replication that takes place is downloading the index files from the update servers for each computer). Having another Ubuntu installation on the same computer will just add to the "auto update" list.
Another advantage is that my "more secure" Ubuntu partition (which may contain sensitive information from time to time) will not be mounted when my wife is on the Internet.
I have an Ubuntu 9.10 server and i need to use an ftp server. I installed vsftp but i can't make it to work. What doesn't work is that can't login to the ftp server with my user(s).I created a user ("AddressBookUser") that should access to some files located on "/var/www/fpt/rubriche/". I set this folder as his home.Here is the row for this user in /etc/passwd:
vsftpd.chroot_list exists, but as you see above the chroot_list_file directive is disabled.When i try to connect to the FTP server the connections is established but after i insert "AddressBookUser" as user name and confirm i get a "530 permission denied" message. This occurs both from the network (LAN) computers and locally:
Quote:
webs@webs:/etc$ ftp localhost Connected to localhost. 220 Welcome to WEBS FTP service!
[code]...
I can't figure out what is the problem but my thought was that it's a problem related to the user configuration rather than vsftp configuration, but it's only my supposition. If i try to login with the "main" user of my Ubuntu server, "webs" i can login correctly.
I am trying to set up an SFTP server. I can log on to it with no problem. But our trading partner for whose benefit we want it cannot. They are unable to make a connection. Here is what happens when they try:
Error: Could not open connection to `ogxxxsft@subdomain.domain.com': Could not connect to `subdomain.domain.com': Unable to connect to server
I'm using ubuntu server 10.04 with openvpn installed on it. My vpn is working fine, all the users can connect without any issue.My problem is that I'm unable to filter the VPN traffic using openvpn. I can't allow all users to be able to interact with other vpn users. I need to avoid this kind of traffic.I was trying to build an iptables firewall, but I just noticed that my openvpn traffic isn't being filtered by iptables.In FORWARD chain, no matter what rule I use openvpn would continue to allow traffic between my clients. It does appear that openvpn is skipping FORWARD chain?For example:
Kuser no longer works for 'rob' but still works for 'robert' & 'root'. It launches (i.e. the cursor bounces up & down and a Kuser box appears in the task bar) but the Kuser screen never opens. Finally, the bouncing cursor disappears as well as the Kuser box in the task bar.
I'm niomi and I'm the first account with sudo. I add an account, bob. niomi can get in reliably on active mode. (maybe relevant?: passive doesn't work) bob is jailed to his home directory, niomi is in ftp-special which gives her access to /. bob can't log in and his shell is set to bin/false. What could have gone wrong?
I was looking around the files in /etc/ to see what they were and what they said, then I noticed there was two files called passwd, which confused me a lot for a second then I noticed one of them was actually passwd-.I compared them and they only differed by one line: < games:36:35:added by portage for gemrb:/usr/games:/bin/bash, which was in passwd but not passwd-.Should these files both exist? If yes, why, what does having both do? If no, then its safe to say I can just delete passwd-
i got a RHEL 5.2 machine.and i noticed that the total used memory(as shown in "free" command) is 3GB higher thanthe sum of RSS size of all processes(collected using "ps aux").i know that its not suppose to be exact because RSS counts ultiple times shared memory (so actually it suppose to be higher than the used memory).the server runs apache which runs a pretty heavy php program.my suspicion is that its memory leak?
I am auditing an Amazon EC2 instance I've set up for security before deploying it. I started to run an install process and saw php5-mhash as one of the packages to install. I tried to find out more about this packages and noticed the description is incorrect: [url]
I have grown to like SeaMonkey on another distro. But did not see it in Debian synaptic.However searching the net I noticed Debian has Iceape, internet suite in synapticwhich as far as I can tell is a twin of SeaMonkey. So if you are looking for a complete package email etc. this is a good one. Opera is as good or better but I like to run two browsers some times when playing music or a game.
I'm testing out 10.04 on one of my partitions, and I love it. I have been using it exclusively for a while now, I have not logged into Windows since! Really don't care about windows anymore!However, yesterday I went to boot into windows... and I noticed the option to choose it is missing from my list! Maybe I'm just not getting to the correct list? The list I get shows like 5 different modes and versions of Ubuntu and something called Windows Recovery (which does nothing), but that's it.
If I suspend this toshiba satellite, and the battery is or gets low it will wake from suspend to tell me that it will need to suspend due to a critical low battery. Which is pretty dumb. I've experimented with this by plugging and unplugging the ac adapter.
1. is it possible to schedule this command in the same manner as shutdown ? eg sudo shutdown -h 60
2. is it possible to schedule the laptop to come out of suspend ?
3. i have a usb sound card (xfi go). when waking from suspend, the internal sound card is selected. i have to manually select the external sound card & for whatever reason, also unmute it too
I am having a really annoying problem here. Every time when I use my Computer while listening to music, or watching a video, I get some sort of crackling in my Audio. For example, playing a mp3 with Rhythmbox (or Banshee or Totem, doesn't matter really) while browsing the web is just horrible, every time I scroll down the page (Mouse wheel or keyboard) I get that noise. Just listening to the music while not touching the Computer works just fine. It does not seem to be CPU related, my reason being: I can max out my CPU, rendering a 3D graphic and still have crystal clear sound, but browsing down some big file-folder at the same time will distort my audio.
The same goes with games which are a bit on the high CPU side, like Nexuiz with high graphic settings: No sound problems at all. I am using my on-board sound, which lspci lists as VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) (rev 10), pure ALSA setup, no pulse/esd or anything of the like installed. Switched to unstable to see if a more up2date kernel or updated alsa would do the trick, it didn't! I am running Debian Unstable - 2.6.37-2-amd64 kernel, Gnome-Desktop. Here's what I did to make my sound work in the first place, since my squeeze didn't recognize my sound-setup out of the box:
To make my onboard sound system-wide default I created /etc/asound.conf: # Modified as per [URL] pcm.!default { type hw card VT82xx } ctl.!default { type hw card VT82xx } .....
I got a new motherboard since my last one failed and this one has a Realtek RTL8168D/8111D PCI-E Gigabit on-board NIC. I noticed when I attempted to load Wheezy on her, she complained about the drivers not be listed in the Debian kernel. Is there a way I can slip in the drivers via USB or some other method so I can do a netinst of Debian on this new system?
When I firsts installed Ubuntu 10.04, and tried to hook it up to my wireless network it noticed my connection and accepted my password, but did not connect. My wireless card doesn't have linux drivers installed. I found the correct drivers, but I am unsure of the correct way to install them in Windows so they work in Ubuntu. I am currently dual booting Windows 7 and Ubuntu.
I just did a new install on a pc chips p23g motherboard based machine. This motherboard has a built in 10/100 connector. When installing I noticed that the connection flashed orange for a bit and then returned to simply flashing slow. Its my understanding that if you have a green steady light and a flashing orange then there IS a connect. If this is true then, for some reason the install didn't find it or didn't install a driver for it. I installed 2 times just to make sure.Oh, when installing, off the dvd (10.4) it said there was a problem but it would give me a desktop so that I could figure it out.I am clueless.There was a box to install and that is what I have been using. Obviously, I am missing something here
Installed Truecrypt onto openSUSE 11.3 (KDE) and noticed that Truecrypt needed to be started as root.Modified visudo using YAST asusername ALL = NOPASSWD: /usr/bin/truecryptHowever, when copying files from my backup drive into the Truecrypt partition, there is an access problem (couldn't remember actual error message)In Konsole , updated visudo to username ALL = (ALL) NOPASSWD: /usr/bin/truecrypt Copying is allowed and working fine.Question:1. What is the difference between the above two visudo setting?2. How to updated visudo to the second setting in YAST?3. How to change the editor for visudo in konsole using nano instead of vi?
