Kuser no longer works for 'rob' but still works for 'robert' & 'root'. It launches (i.e. the cursor bounces up & down and a Kuser box appears in the task bar) but the Kuser screen never opens. Finally, the bouncing cursor disappears as well as the Kuser box in the task bar.
View 1 RepliesWhen I started using Slackware I've been using USB headset. Everything ran perfectly fine. They got recognized, I could use all of it's functions and so on. Unfortunately volume control on them stopped working so I had to service them, and like in every third world country, yay I need to wait minimum three weeks just so they can press a button and say "Yup, they don't work".
I bought normal headset to use them while other one is getting fixed, and didn't expect any problems with them considering they are "old" technology, normal audio input and output.
Now problem is following, sound works fine but microphone doesn't. Once I managed to "fix" it by switching audio input from mic to something else and then back to mic, now even that doesn't work. Another... "problem" is if I leave my USB webcam plugged in while booting computer, there is no sound at all, ether on line ones or USB ones but I can easily solve that problem by unplugging webcam, rebooting and plugging it back in later.
Now everything ran fine until my computer shutdown while I was sleeping. Don't know why, but it started happening recently, don't see anything smart in logs so I assume its... something, read it could be cache, HDD, temperature and so on but since logs don't write down anything smart... will deal with it some other time.
When I talk I can actually hear myself on the headset, which probably means that they work. If I put mic boost all the way up, I can hear myself perfectly clear, but somehow... seems that that information just doesn't get to Slackware, well it gets somewhat considering that it reacts to me adjusting mic boost on KMix, but everything else... no.
Arecord doesn't record anything, TS register as microphone isn't plugged in at all, skype doesn't get any input ether.
Code:
I haven't used my VB for a few weeks however all of a sudden it refuses to work for my normal non-root user. It's almost as if it can't find libraries in the /opt/VirtualBox directory. Initially it refused to start completely so I linked the required libs into /usr/lib64 ( yip real hack. Then it started but a vm would not start, and comes up with an error about a missing lib again which is definitely there. My non-root user is in the vb group and nothing besides system updates has changed. vb 3.2.10 slack64-current.
View 14 Replies View RelatedI want to go to 13.1 but I have never managed to figure out the importance of the wheel, adm and users and other groups in KUser. I suspect that it is important but the standard explanations stop short of KUser as though no one wants to understand what it does and how it affects the way the PC and Slack work?
View 10 Replies View RelatedIt has been a while and many ubuntu updates since i connected the windows laptop, it used to work fine but this ubuntu machine keeps telling me the cable is unplugged. When i boot into windows XP the network works fine and the laptop can connect through the network to use the internet. I have a very simple home network ... 3 pc into one switch. I am by no stretch of the imagination good with networking
View 7 Replies View RelatedI have been using my system for couple of weeks, and normally update software when the icon is displayed on top bar (gnome). Last couple of days there were updates for X, and I am not sure whether that is the cause of my problem. Once bootup, I get the login screen. When enter the password the login screen keep coming back. there is no error about any password issue, or anything. It keeps prompt me to enter the password.
I could login back the following way.
1. ctrl + alt + F1 , and login with the same username/pwd as for X
2.change to root
3.pkill gdm3
4.exit from root to user privilege
5. startx
The system starts X correctly and no login screen is displayed. I could use the system as usual.
The only thing I did custom to my system was upgrading to the latest kernel (2.6.38) using the source. This was to get support for my hardware, but that was about a month ago. I do not see anything in /var/log (X, demesg etc).
My keyboard has suddenly stopped working in Gnome (Ubuntu 10.4 LTS, Toshiba satellite laptop, P300). It works fine to logon, and with KDE.
The last thing I did before it stopped working was to hold down a shift key for too long, while I was thinking about what I wanted to do. The 'sticky keys' prompt popped up, which I killed. After that the keyboard has died - in *all* applications (e.g. gedit, terminal etc.)
The mouse still works. If I logout of Gnome, it comes alive again to type in the logon password. I had a look in messages, but without any enlightenment.
My USB printer stopped working after I upgraded Slackware, using the Current.Also can not install any USB printer. CUPS version 1.4.2.
View 14 Replies View RelatedI'm running 10.04, typically using the default gnome session. I locked my screen overnight, and when I came back the keyboard wasn't working. Before anyone asks, yes it is still plugged in. Here's where it gets weird. I logged out using the mouse, and switched to another user on the system, and it works fine. I have keyboard input on the gdm log on screen and for other users. I've tried about every possible combination of logging on/off and rebooting and nothing seems to work. Is this an Xorg thing or a gnome thing? Any ideas what to do from here? I can still get to a terminal through another user and then "su" to my user so I can run "sudo" commands. So in other words, no need to bring in a live CD or a clean install at this point, but I don't really know where to start with this one.
UPDATE: I switched session types to LXDE, and the keyboard DOES work for my user. However, when going back to gnome it still doesn't work. I guess that seems to point towards it being a gnome thing, not Xorg.
User switching doesn't work for me anymore since upgrading to Lucid. When I choose "Switch From <user>..." in the logout menu on the top-right of my screen, it jumps to the login screen (gdm) but it doesn't show any usernames as it should.I wish I could get a screenshot of gdm but I'm not sure how.
View 4 Replies View RelatedYesterday I used slackupdate.sh [0.7.3] from darklinux.net to update Slackware 13.1, 32 bit version. I got Firefox 3.6.6, installed it, moved the libflashplayer.so to the new plugins directory. Now I can't play utube videos. about: plugins says that flashplayer is installed and working. Grabbed flash from Adobe website, overwrote the existing one, still no joy. Asked in the Firefox user forum. Answer 'same thing happen to me -- Windows Vista' ...I'm not an advanced user. So, is this a Slackware problem, an Adobe problem, or a Firefox problem? I'm asking here because y'all are more likely to point me to a solution. I've always been able to grab the Linux version of Flash from Adobe website and install it
View 7 Replies View RelatedI'm on Firefox 3.6.11 with Flash 10.2 d161 on Slackware 13.1 32-bit. Hulu stopped working sometime this past week. (Actually when it stopped working I was still on the previous versions of Firefox and Flash - I upgraded 3.6.10 to 3.6.11 to see if it would help.) Worked fine before that. I've tried Firefox safe-mode, disabling add-ons and using default theme and none of this matters. Flash works fine and Hulu worked fine before a week ago.
View 5 Replies View RelatedI have installed Samba 1.2.63-0Ubuntu4 (system-config-samba) on Ubuntu 10.04, and it has been working without any issues for a few months now, but now the username/password authentication does not work anymore and I can't figure out why
I have tried changing username/password(thinking maybe i forgot the correct credentials) and the new username/pass does not work either.
I have also tried "sudo service smbd restart" in terminal to restart samba but this does not work either
I can still see visible shares when browsing server via "network neighborhood" on XP,,, and can access the shares that do NOT require authentication
username/password are made up of standard characters as well
I'm niomi and I'm the first account with sudo. I add an account, bob. niomi can get in reliably on active mode. (maybe relevant?: passive doesn't work) bob is jailed to his home directory, niomi is in ftp-special which gives her access to /. bob can't log in and his shell is set to bin/false. What could have gone wrong?
View 3 Replies View RelatedI have 13.0 64 with alien's multilib packages.
Adobe Acrobat has stopped working. If I try it from the command line I get
Quote:
./acroread: No such file or directory
I have tried re-installing but there is no difference and the file is clearly there. Is it possible a recent upgrade of a slackware patch might have caused this?
With Firefox 3.6 from the official repository, and the flash-player-plugin from Slacky.eu installed here. It's worked fine up until now, where websites either claim it's not installed, or show a blank box instead.NoScript is installed on my Firefox, but given that on fully trusted pages (of which there are very few) it still happens, and nothing else blocks Flash besides AdBlock and Firefox's own settings (both checked too) I suspect the plugin.I also tried downloading direct from Adobe, and plonking the libflashplayer.so in /usr/lib / mozilla/plugins and making a backup of the original one (The one provided from Slacky's package) but to no avail.So it seems to be the plugin, but for inexplicable reasons.Would anyone happen to be able to explicate this inexplicability?
View 12 Replies View RelatedSetting up my slackware system for prime use, i downloaded robby's xfce 4.8 package and upgraded xfce 4.6. Later i downloaded slackpkg and upgraded all my packages for the first time. When i did a restart, xfce 4.8 had gone back to xfce 4.6. I just went back to the directory where i was storing all the xfce 4.8 files and did the upgrade again, it worked; now for some reason though my terminal emulator no longer works, as regular user and root. I get an eroor saying, failed to execute terminal emulator. Input/output error.
View 3 Replies View RelatedI'm running Slack 12 on a Thinkpad T60 and my wireless has stopped connecting to my wireless network at home. I'm using wicd for network management and it was working up until yesterday. I don't know what to do to track down the problem, so I'm looking for advice to do so.Other wireless devices in the house can still connect, so I don't believe my router is the problem.
View 6 Replies View RelatedWhen I installed slackare 13 it detected usb drives and cameras automaticallyow it doesn't. I am runnning a 13.0 system, not current, so I have only applied the updates in that branch (iirc including a new kernel).nowadays when i plug a device in it does not seem to be detected by HAL (i.e not in KDE).However the device is listed if you use the command "lsusb" and the computer obviously knows it has been plugged in as there is a relevant entry in dmesg.Sorry for the generallised nature of the post, but I don't really know anything about HAL or how it can have stopped working
View 1 Replies View RelatedAfter updating my system today, sound stopped working. VLC said I should update alsa-lib. Slackbuilds had none to offer, so I got the sources from http://www.alsa-project.org/main/index.php/Main_Page. It compiled and installed without problems, but the error from VLC states the same. Is my system the only one affected by the update, and how do I fix it?
View 4 Replies View RelatedAfter doing a reconfigure of my wrt54gl router, trying to activate WEP encryption, and then finding WICD wouldn't connect, and returning to the original config on the router, now wicd won't reconnect the wireless card. Here's the wicd.log entry from the attempt to connect:
Code:
2010/01/30 18:40:46 :: ifconfig wlan0 up
2010/01/30 18:40:46 :: iwlist wlan0 scan
2010/01/30 18:40:47 :: ifconfig eth0
2010/01/30 18:40:47 ::
2010/01/30 18:40:47 :: {}
2010/01/30 18:40:47 :: hidden
2010/01/30 18:40:48 :: scanning done
2010/01/30 18:40:48 :: found 4 networks:
2010/01/30 18:40:48 :: found use_settings_globally in configuration 1
2010/01/30 18:40:48 :: found afterscript in configuration None .....
I have had my computer set to dual boot Windows 7 for months now with no issue. Now today when I logged on to Slackware (13.1 x86_64) it suddenly stopped recognizing that my Windows 7 drive has anything on it. Fdisk cannot see any partitions anymore. Yet I can reboot the computer and run Windows 7 off it just fine. The windows drive should be /dev/sdb with sdb1 being its system reserved partition and sdb2 being the actual Windows partition.
Dmesg sees that it is there like my other drives, but it appears that the Windows 7 partition is not unaccessable to anything in Linux.
How could this work yesterday yet today it doesn't? I didn't change anything.
Booting up this morning, no problem. But I accidentally let my laptop go into suspend mode, which doesn't work, so I had to force a restart (Suspend mode on my laptop won't allow me to wake it up again). Now, on rebooting, X doesn't work. I usually boot to RL3 then use startx. Now it just flashes the screen then gives me this error -
Code:
(EE) Error compiling keymap (server-0)
(EE) XKB: Couldn't compile keymap
XKB: Failed to compile keymap
Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.
Fatal server error:
Failed to activate core devices .....
Fatal server error:
Failed to activate core devices.
Please consult the The X.Org Foundation support at [URL] for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. If I su - to root and then do "init 4", I get to xdm, and I can log in. X then starts, but with no sound, wrong keymaps, launchers not working; all sorts of things wrong. If I startx as root I get a normal desktop. I have tried copying root's xinitrc to /home/spoovy, but makes no difference.
Just recently discovered that for a non-root user the touchpad on my Acer laptop ( Aspire 5720z fyi ) isn't working in X ( KDE or XFCE ). It does work in in tty (at login) and for root it works in both environments.
I'm running 13.1 x64 on it, with the normal security patches via slackpkg. Didn't notice before since I normally use a mouse (and thus I do like the touchpad being disabled so I don't 'tap' away the cursur while typing).
With the recent holidays (with family visits and all) I took the laptop on my lap,.and voila: no trackpad movement.. I did some searching allready, but this problem seems to be solved since a while, and isn't supposed to be in 13.1
FROM RELEASE NOTES Piter Punk for udev and slackpkg work, updating the shadow password system, writing the initial patch for polkit to use a shadow authentication backend so we could consider using KDE 4.4.3, and making tap-to-click work with Synaptics touchpads out-of-the-box,)
[URL]
/etc/modprobe.d/psmouse(.conf) allready has this commented line:
#options psmouse proto=imps
If, as root, I 'Leave' --> 'Logout', I get the KDE login screen.If, as user rob, I 'Leave' --> 'Logout', I get a black screen from which I must power off to recover, and I use the term very loosely. User rob is a member of the 'power' group.
View 10 Replies View RelatedI've got a problem in doing sudo working for mounting things (e.g. usb pen or optic discs). Details:The OS: Slackware 13.0The response to sudo -l command:
Code:
User user1 may run the following commands on this host:
root) /sbin/shutdown -h now, /sbin/shutdown -r now
[code]...
I can SSH to my own box using "ssh -X arancaytar@localhost" and run graphical applications. When I try the same using "ssh -X chris@localhost", I get an error message saying
Code:
chris@enki:~$ gedit
X11 connection rejected because of wrong authentication.
[code]....
I installed SSH-keygen dependancies for a /chroot user.
I can now execute ssh-keygen from the /chroot user BUT I receive a message PRNG is not seeded.
When I do it from any of the users that are not /chroot users, it works fine.
I don't know what happened but sendmail suddenly stopped authenticate my users who tries to send mail.
I use slackware 13.0 and sendmail for SMTP with ssl and plain authentication. Imapd works fine.
There is nothing in logs just that the client did not issue MAIL/EXPN/VRFY/ETRN during connection.
I installed today (fresh install) the latest version of squeeze, and after installing kuser, I attempted to run the program (of course as root), so that I can start managing accounts with my preferred application. However, this is what I got when I attempted to run the program:
# kuser
QGtkStyle was unable to detect the current GTK+ theme.
Qt: Session management error: None of the authentication protocols specified are supported
kuser(3136): Session bus not found
KCrash: Application 'kuser' crashing...
sock_file=/root/.kde/socket-hostname/kdeinit4__0
Warning: connect() failed: : No such file or directory
KCrash cannot reach kdeinit, launching directly.
[Code]...