I got a new motherboard since my last one failed and this one has a Realtek RTL8168D/8111D PCI-E Gigabit on-board NIC. I noticed when I attempted to load Wheezy on her, she complained about the drivers not be listed in the Debian kernel. Is there a way I can slip in the drivers via USB or some other method so I can do a netinst of Debian on this new system?
View 1 RepliesI need some help installing the driver. I am very noob. so when I try to build a deb file with sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Debian/testing
# sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Debian/testing
Created directory fglrx-install.7aYYig
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-
[Code]...
I'm having all sorts of problems after doing my first update (#1. safe-upgrade, #2. full-upgrade) in over a month.
Anything from no Nvidia linux-headers being found to any VT not working. After completely removing all of the previously tried Nvidia presence on my PC, is there a safe way for me to install the non-free drivers?
I'm trying to install radeon 5770 drivers but it fails with this message.... same message when I use sgfxi
Code:
# vim /usr/share/ati/fglrx-install.log
1
2 Creating symlink /var/lib/dkms/fglrx/8.85/source ->
[Code]....
I really don't like GADMIN-SAMBA, and want to load the graphical tools I used previously on my homebrew Samba box I have at home (used to have Squeeze on it).
Have amd64 Debian 7.8 installed on a slimline HP Compaq PC ...
Where should I get the drivers for the video card R7 260X to run on Debian Wheezy? Because it cant be from amd site, considering that I installed from their site, but when running apt-get check is said to me that there was the missing dependence fglrx-core..I also couldn't remove it, because it had other unmet dependencies... After long time attempting to solve on my own I just got enough pissed that I formatted the machine.Now I am asking here to find out what is the best practices when installing those drivers, because clearly I wasn't doing it right...
View 5 Replies View RelatedWhen i finish install debian7.8 wheezy in my Acer computer(graphics :GT750M+ Inter HD Graphics Family),
it appear:
"GNOME3 Failed to Load"
" Unfortunately GNOME 3failed to start properly anmode"
"This most likely means your system(graphics hardwcapable of ....."
i check system's Driver status:Gallium 0.4 on llvmpipe(LLVM 0x209) Experience Fallback so i try to install nvidia drivers in debian,but i have failed many times. everytimes i finish install nvidia drivers i 'startx " failed
Does upgrade from wheezy to jessie modify print drivers....
View 1 Replies View RelatedI need to install wheezy nvidia-graphics-drivers because my video card (geforce GT 425m) isnt supported on the squeezy version. I downloaded the wheezy source code and built it on my squeezy system, some .deb files where created, the problem is I dont know which of those to install, these are the files:
libcuda1280.13-1amd64.deb
nvidia-glx-ia32280.13-1amd64.deb
libcuda1-ia32280.13-1amd64.deb
[code]....
I have some servers... more than 30 (different brands: HP, IBM, Supermicro, Fujitsu, etc).
I wonder if there would be some way (and how to do it) to load the RAID drivers in Debian Live 7.8.0 without installing it?
How to load the driver for this SAS+SATA controller during install, I tried loading the supplied 5.0.5 driver from LSI but it appears that the options in the provided list do not provide actual support for the 5.0.7 release. Anyone having luck with the 9280 controller. I checked kernel.org and saw that supports is getting added for the upstream release of the kernel but wonder if anyone was able to workout a patch for the present Debian kernel in order to install the driver as the OS loads.
View 1 Replies View RelatedI have grown to like SeaMonkey on another distro. But did not see it in Debian synaptic.However searching the net I noticed Debian has Iceape, internet suite in synapticwhich as far as I can tell is a twin of SeaMonkey. So if you are looking for a complete package email etc. this is a good one. Opera is as good or better but I like to run two browsers some times when playing music or a game.
View 1 Replies View RelatedI am having a really annoying problem here. Every time when I use my Computer while listening to music, or watching a video, I get some sort of crackling in my Audio. For example, playing a mp3 with Rhythmbox (or Banshee or Totem, doesn't matter really) while browsing the web is just horrible, every time I scroll down the page (Mouse wheel or keyboard) I get that noise. Just listening to the music while not touching the Computer works just fine. It does not seem to be CPU related, my reason being: I can max out my CPU, rendering a 3D graphic and still have crystal clear sound, but browsing down some big file-folder at the same time will distort my audio.
The same goes with games which are a bit on the high CPU side, like Nexuiz with high graphic settings: No sound problems at all. I am using my on-board sound, which lspci lists as VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) (rev 10), pure ALSA setup, no pulse/esd or anything of the like installed. Switched to unstable to see if a more up2date kernel or updated alsa would do the trick, it didn't! I am running Debian Unstable - 2.6.37-2-amd64 kernel, Gnome-Desktop. Here's what I did to make my sound work in the first place, since my squeeze didn't recognize my sound-setup out of the box:
To make my onboard sound system-wide default I created /etc/asound.conf:
# Modified as per [URL]
pcm.!default {
type hw
card VT82xx }
ctl.!default {
type hw
card VT82xx } .....
I am trying to boot Debian Live, using Grub, from a folder on my hard drive which is basically the contents of the iso.
Here is my menu.lst:
However, on boot, after a while, it says boot failed. The error message it gives is: "Unable to find device with live filesystem" or something similar.
i have fresh installed debian wheezy xfce4, and using slim to start it but i can't get reboot, shutdown and thunar can't open flash and others volumes. i using .xinitrc (exec ck-launch-session startxfce4)
View 3 Replies View RelatedI am giving Wheezy a whirl and am having with screen blinking ever 30 seconds.
View 5 Replies View RelatedI boot from CD (Tried both debian-506-i386 and the Netinstall) I also tried the flags acpi=off noapic nolapic And when it starts booting the install, it appears: "Kernel panic- not syncing: attempted to kill init"
View 5 Replies View RelatedThe open source drivers don't work with HDTVs right so I needed to install ATI drivers
Im so upset because I FINALLY got Kernerl 3.0 working, but now recovery mode won't even work with the ATI drivers
I installed driver 11.8, my card is a 5770. Is there anything I can to do boot it up and somehow remove the bad drivers?
I'm running Archlinux. I used pacman(update/package manager) to download video drivers for my card, which was xf86-video-cirrus. Everything went well. Now I want to load the module/drivers.
lsmod returns list of loaded modules but the graphics isn't one of them.
How can I load the drivers that I downloaded?
But when Squeeze goes from 'testing' to 'stable' in December... does Wheezy get promoted from 'sid/unstable' to 'testing' at the same time?.
I started my life in Linux with and currently use Ubuntu, and it runs decent(barely). However, I just upgraded to Ubuntu 10.10, and because of strange little issues and increasing bloatware, I have been forced to strongly consider the "mother OS": Debian.
The reason for my original question is that I want to run whatever the current "testing version" is. And if Wheezy gets promoted at the same time Squeeze does, then I will just wait the 4 weeks instead of slogging through another install(I prefer fresh installations vs upgrading within). I know the test versions of Debian are a bit more active than stable, but I have used Ubuntu for over 2 years, so I have some experience dealing with Terminal commands, package management, gnome, etc...I am also currently VirtualBoxing a copy of Squeeze.
I got "stuck" with stable up to now and want to upgrade to Wheezy. But, although I've done this before, I'm having a dependency problem I wanted to ask about before breaking my system somehow. This is the /etc/apt/sources.list, ready for Wheezy:
[URL]
So, I regularly use aptitude as my package manager. After updating the database with aptitude update, trying aptitude full-upgrade gives me a huge of conflicts.
[code]....
But, if I use apt-get dist-upgrade, I get no conflicts. if I dist-upgrade with apt-get, will that affect my daily usage of aptitude (which I prefer)? I know APT is a single database and apt-get and aptitude are just different interfaces, but I guess differences might rise when marking packages as automatically or manually installed.
Is it possible to run kde in Wheezy without udev? I am asking this because the modesetting failure is manifested as soon as udev tries to populate the /dev directory.
View 6 Replies View RelatedI dont want openjdk packages on my system, in Kubuntu I had a few troubles with them trying to make SqlDeveloper to work around. So this is what I see after a java -version:
Code: Select alledgardo@debian:~$ java -version
java version "1.8.0_45"
Java(TM) SE Runtime Environment (build 1.8.0_45-b14)
Java HotSpot(TM) 64-Bit Server VM (build 25.45-b02, mixed mode)
edgardo@debian:~$
I've been uninstalling openjdk from synaptic and with other few commands on the terminal so far and I think I probably broke it. I have no /usr/lib/jvm folder only /usr/lib/java/jdk1.8.0_45.But everytime I wish to start up Eclipse it shows the logo for a few seconds and that's it.... never gets opened. And in /usr/bin$ I only have this symbolic link....
Code: Select alllrwxrwxrwx 1 root root 22 abr 19 18:57 java -> /etc/alternatives/java
I've tried different tutorials I found surfing the web but none of 'em seem to work.
I'm brand new to Ubuntu and have a MX860 wireless printer.I want to use it from the Ubuntu system.The printer is already on line and functional wirelessly.I downloaded the drivers but it is unclear how to load.I expected to click on something to load but there are a whole bunch of files enclosed.Clicking the install.sh file makes the screen blink but that is about it.A screen print of the main files is attached.
View 1 Replies View RelatedNVidia drivers fail to load ?
Code:
If I hit the option Restart X it boots and displays normally but I always get this while booting
I'm booting with Slackware 13.1 x64 My MB is GA-X58A-UD5 rev. 2 but I cant boot. My HD which is connected to the SATA3 port 6 and 7 is not getting detected. It is a Marvell SE9128
How can I tell the Huge.s to load the drivers of this controller?
I have a problem loading ipmi drivers. The program responsible for the loading fails on a first one (ipmi_ msghandler.ko) and quits
View 1 Replies View RelatedI've had a weird issue recently with Java/Spring. Basically, it would work on all machines but my trusty Debian box. Macs for devs, Ubuntu for production and some devs have it too. This annoyed me, because of course Debian is the greatest and it must work there too! Also, Java is based on the whole write once run anywhere concept, I have never really had a problem with code behaving differently on different Java installs of the same version, even on completely different OSs it seems to behave itself very well. URL....
I moved up to Jessie and the problem goes away. I can only conclude that some library that is called by Java got upgraded, somehow influences the order in which Spring resolves its dependencies. Probably the fact that other devs build on Ubuntu and have got it working there, and the upgrade to Jessie brings my libs more in line with what Ubuntu will be running has done the trick.
I am trying to install octave 4 in my debian wheezy, and I am getting following error after I have executed ./configure
checking for sgemm_ in -lmkl... (cached) no
checking for sgemm_ in -framework vecLib... no
checking for sgemm_ in -lcxml... (cached) no
checking for sgemm_ in -ldxml... (cached) no
checking for sgemm_ in -lscs... (cached) no
checking for sgemm_ in -lcomplib.sgimath... (cached) no
checking for sgemm_ in -lblas... (cached) no
checking for sgemm_ in -lblas... (cached) no
configure: error: A BLAS library was detected but found incompatible with your Fortran 77 compiler settings.
I have tried to find a solution about issues installing octave 4 from binaries. I can not use octave from the repository as it is old for my studies.
when gnome 2.32 might be ready for Wheezywhen gnome 2.32 might be ready for Wheezy. I'm in hopes that Wheezy will NOT have gnome3, and I'm somewhat confident of that, but I play in both Debian and Ubuntu and I'm thinking about trying to get the Ubuntu devs to port Debian's gnome version 2.32 into their Oneiric Ocelot via package 'gnome-desktop-environment'. (It's currently at 2.30).
View 5 Replies View Related