Ubuntu :: After Baterie Check Screen Shuts Off / Resolve This?
Nov 2, 2010
I installed ubuntu on one of my computers and loved it so i put together another computer the motherboard did not have a build in on board video card so i put in a ATI (graphics by rage) 128pro graphics card, and wen i run the instalation of the O/S after it says batterie check [ok] the screens sorta shuts off i guess and does not trurn back on, its a desktop computer 1.6procesor 512mb ram, and was working previously with a win xp.
i was watching some videos on videos in fullscreen and after being idle the screen turns off. is there a setting to change this or do i have to disable putting the display to sleep in the power manager?----- edit -----i forgot to mention that i am using ubuntu classic. also, i disabled putting the display to sleep in the gnome power manager, but the screen still shuts off if the system is idle. guessing that the gnome power manager isn't actually in control.
running xubuntu 10.04 on an older machine and no matter what the power management settings, the monitor keeps being turned off.Is there any other way (command line, maybe) to completely turn off the monitor power management?
I am working with linux special edition LXFS Installed everything from the disk, works all fine but sometimes Linux shuts down suddenly and the following message appeals on a black screen. ' (proces 271) GLIB - warning getpwuid_r() : failed due to unknown uster id co) ' When I restart the computer everything is OK again. but than later it happens again.
I'm trying to partition/format a new external hard disk for backup and have run into a snag that now prevents my computer from booting. In the description below of what happened please bear with me as I do my best to remember the commands and screen output (which for obvious reasons I don't have in front of me).As root.The disk was subsequently writable. However, I then realized that the default start and end cylinders had resulted in a very small partition apparently occupying some free cyclinders in the beginning of the disk.
So next I ran fdisk again, deleting the sdc4 I had just created and creating a new one instead, this time using the cylinders at the end of the disk. When I exited fdisk I got a message something like that the new tables can only be read upon a subsequent reboot. I ran mkfs again, but not e2label. Indeed using /sbin/fdisk -l, sdc4 still had the small size as defined initially. So I rebooted.
Now when it comes up I get something like "checking filesystems. fchk.ext3: can't resolve 'LABEL=/media/LaCie2TB1'" and am prompted to login as root to correct. I tried to simply delete sdc4 again but that didn't help. I also tried to edit /etc/fstab (using vi, which I don't know at all) but it kept telling me that this is a read only file, even though permissions are rw for root.Can anyone out there help me so that (1) I can boot into my computer, and (2) I can correctly partition and format the hard drive??
I finally got Ubuntu server edition 10.4 LTS installed. But After the installation my computer boots and after the BIOS screen there is a blinking cursor and then the monitor says that there is no input.I am running a Dell Optiplex SX270, no modifications.
Recently my laptop running Ubuntu 10.10 has had an abrupt power shutoff (actually several times -- my battery has some problems).
Now when Ubuntu boots, I get the startup screen, but after a few seconds, the screen goes black. I can still boot from the live CD and in fact I am using my computer from the CD to write this post.
A few more details: When I press the power button while my computer is in this "blank" state, I get hard drive activity. Also, if I press "power", and then "enter", the machine actually shuts down.power
My laptop was shut down normally, but when it restarts - it just shows the very first image (Toshiba something....) which is the screen where it says what commands to type to get into bios.
After this - the screen shows nothing more. All black, except some faint (extremely faint) lines...
I don't know - my first thought was that the screen itself was caput, but since it shows the initial screen - I guess it's not...
Following the instructions in this post I'm able to boot and work using the live-cd option (Try without installing). The trick is, of course, adding 'nomodeset' to the boot sequence.
Now, my problem is to add 'nomodeset' to the "normal" boot sequence - the one on my hard disk. I'm running Ubuntu on an LG E300 with ATI Radeon Xpress 1250.
I recently decided to give Ubuntu another try after a break for a while, and have hit a bit of a road block The live CD booted fine, ran, installed, all flawlessly, so it's now a dual boot with Windows 7. Only issue now is when trying to load the HDD installed Ubuntu, it just hangs on a black screen, no HDD activity light or anything. First up my specs code...
Next, what happens in detail:
Machine posts, loads boot loader with OS options. Whether choose Ubuntu or recovery Ubuntu, it always hangs on black screen straight after that.
Next, what I have tried to fix it so far:
Tried pressing 'e' and replacing the quiet splash with nomodeset, same result with both normal flavour and recovery.
Tried copying the xorg.conf from the live CD filesystem to X11 folder on main system drive. Also tried editing it to try and use generic vesa driver.
I am unable to return my screen resolution back to the 1024x setting. Somehow I got it stuck on the 340? setting, which is not allowing me to see/access the dialog box save button when I go to preferences, display. Anyone know a way out of this mess?
I'm trying to setup an Ubuntu 10.10 desktop that will allow any number of vnc connections. When I try to connect (from Win7 using UltraVNC, which has worked for me using a comparable Red Hat RHEL 5.5 setup), I get a flickering gray X screen with no apps running, as if it were starting X over and over. I'm trying to make this display Ubuntu's login screen at that point.
I have installed vnc4server and xinetd. My xinetd config is code...
After installing Ubuntu Server 10.04 LTS, I restarted my machine. I removed the disk, but now when it starts, it never gets to GRUB. Instead, it just takes me to a black screen with a blinking cursor. I can't type in anything and holding shift doesn't take me to GRUB.
Just installed 11.4. First effort with OpenSuse but have previously used Ubuntu on another machine. Installation went great. After I log in the screen goes blank with just a mouse cursor, everything else is black. Boots okay in recovery mode.
This is a dual boot with Windows XP. Machine boots into windows as expected.
I just downloaded and installed Debian 6 netinstiso for testing. Everything is running ok except I cannot check items on software sources screen. This is the errors I get when trying to reload Synaptic Package manager.
I've installed VMware server 2.x on my windows XP SP2 and installed Ubuntu 9.10 on the VMWare. I have noticed several times that the ubuntu machines shuts it down (not sure the time pattern but it could be that it shuts down after a certain minutes idle). As a result of that, I always have to restart it.
I checked the event log viewer, it looks like there's always a segfault just before it shuts down. I've pasted the last few lines of event log below.
Jan 19 10:28:16 jfernandez-ubuntu kernel: [ 32.648005] mtrr: base(0xf0000000) is not aligned on a size(0x15a0000) boundary Jan 19 10:28:21 jfernandez-ubuntu kernel: [ 37.748105] type=1503 audit(1263914901.917:2: operation="open" pid=1229 parent=1228 profile="/usr
I've been using Ubuntu on my desktop for a while and it worked like a charm. Three months ago, I decided to put a new cpu fan because the old one was gathering dust and I wanted to have lower cpu temps. I decided to buy an Scythe Kabuto, nd installed it with no problems. Windows XP works perfect, but the problems come when I try to start Ubuntu, both from a Live CD or from the HD. Ubuntu starts normally, but in a short period of time (2~15 minutes) the PC randomly shuts down. I've seen some errors when I restart and try to start Ubuntu again mentioning high CPU tempetatures. The fact is that the CPU temperature never reaches more than 65, so my guess is that there is some problems with the ACPI and temp reading.
Ubuntu shuts itself down and displays message that it is running low on graphics, giving me options to run in low graphics mode or to troubleshoot. I have been given the following advice but have no idea what to do:
You are using the open driver i915 as you are using an intel based video chip.
Sounds like you need an xorg.conf file to define the display a little better as udev is not detecting. Here is a sample file you can start with: (Refers to a URL that led me to this forum)
You can ignore any sections and entrys regarding keyboards as udev is pretty awesome at picking those up
I just had my laptop in the shop for a month or so now (through Staples warrenty) I sent it in because my LCD monitor wasn't lighting up after a bit of use.
Got it back and they said my issue could not be replicated, so they just cleaned it and such and gave it back. Well so far it's been going pretty good, monitor stays on except when i turn on Heroes of Newerth.
What kind of problem is this and is it easily fixable?
When running ubuntu 9.1 on a toshiba a105 s4384 it randomly shuts down without warning. At the time of each i am running one or more of the following: Firefox(newest), Monodevelop(2.2), and pidgn for linux.
I installed ubuntu 10 yesterday and I have a real frustrating problem. It shuts down for no reason at all, at first I thought it was because I was not using it (power management or maybe because of the screensaver) so configured it to never put it to sleep or shut down, and disabled the screensaver but it keeps happening. This is actually the second time I'm writing this post, because it suddenly shut down again while I was writing this before submitting it. I used to never have this problem before when I was using windows, so the problem must be something with Ubuntu.
Could it be something with my gfx driver? I tried configuring Fluxbox to use my second screen as an extended desktop but couldn't get it to work except with Gnome. If I do "fglrxinfo" I get a segmentation fault, so I messed that up but I'm okay with that because everything is working like I want it with Gnome. One weird thing I've noticed is that ubuntu once said (when booting) that it couldn't find /dev/null...? Should I just try a reinstall? I'm on a quad core with 2GB ram and an ATI HD 4870 2gb graphics card.
I've been using Ubuntu for about one year. Recently upgraded to 10.04. The PC tries to boot, comes to the "Booting from device hd..." screen and then shuts down. It shuts down or halts but doesn't power off. The CPU is still powered. This happens for about 2 in 4 boots. The recovery mode runs just fine. It says no damaged partitions. Only the 'booting from device' is the problem point.
So, recently I tried getting Ubuntu on my desktop. First, I got the CD, inserted it, and it seemed to boot fine to this orange screen, with a texture, and at the bottom what seemed to be a video roll and a man with his arms open. Right after that my system's monitor seemed to shut down, completely, and I was unable to turn it back on. I restarted my computer and went through the same process until I took out the CD. So then I tried installing it into Windows, but that didn't work either. It had the Ubuntu boot option, and I selected it where I was shown The installation is completing
5-4-3-2-1-0
With a counter, and when it went to 0 my screen shut down and my computer went into a weird half-off state.
After using Ubuntu 10.4 for months, my computer has started turning itself on without my pressing the on button. Sometimes it gets halfway through the boot process and shuts itself down. Sometimes it gets all the way to the desktop and a window pops up saying shutdown in 60 seconds however it never waits but shuts down immediately. Probably the second time this happened, I had time enough to get to the Power Manager and made sure it was set to 'never' power down. Currently the on/off cycling is happening so quickly I can't check the BIOS or grup. My only control is the master power switch on the back
I upgraded to 10.04 and it is sooooo annoying. The computer will just randomly shut off. Sometimes it will be 10 minutes after turning the computer on, sometimes 10 hours!
I have a strange problem; I did an upgrade to ubuntu 10.10 succesfully. But now sometimes when I activate something (anything from O-O to synaptic or whatever) the OS just shuts down .I don't get any fault messages or other stuff.
