Following the instructions in this post I'm able to boot and work using the live-cd option (Try without installing). The trick is, of course, adding 'nomodeset' to the boot sequence.
Now, my problem is to add 'nomodeset' to the "normal" boot sequence - the one on my hard disk. I'm running Ubuntu on an LG E300 with ATI Radeon Xpress 1250.
I just upgraded to Lucid Lynx, and like most people, I'm getting the black screen during boot. So, I went into the grub edit screen, and I tried every variation of the nomodeset fix I could find. So far, nothing has worked. I don't know what graphics card I have, but it's always given me problems.
View 4 Replies View RelatedRunning ubuntu 10.10, had to use nomodeset to successfully boot from cd into "Try ubuntu without installing" thing and install ubuntu.
Edited grub by adding nomodeset after quiet and splash in order to boot from hard disk, still booting that way as I'm writing. The computer is an All In one Pc called ONETWOPWU44. The graphic card is an NVIDIA g210m.
After booting into hard disk I installed the proprietary driver resulting in an alternate of white then gray then black then an Image with red blue and some other colours on the screen, not sure of the order but they came one after an other, right when the login form should appear, I am then able to login by tipping my password into the form and pressing enter, I now that cause I can hear the sound when the system loads but the above described situation continues.
I had the same result with an older nvdia driver it was 253 something, don't remember exactly. Then I downloaded the 260.19.21 driver from nvdia website and installed it, with this one I only got a black screen. I now have a fresh ubuntu 10.10 copy and would like to be guided in making this work. How do I install the driver corectly or how do I enable nouveau 3d support?
I recently decided to give Ubuntu another try after a break for a while, and have hit a bit of a road block The live CD booted fine, ran, installed, all flawlessly, so it's now a dual boot with Windows 7. Only issue now is when trying to load the HDD installed Ubuntu, it just hangs on a black screen, no HDD activity light or anything. First up my specs code...
Next, what happens in detail:
Machine posts, loads boot loader with OS options. Whether choose Ubuntu or recovery Ubuntu, it always hangs on black screen straight after that.
Next, what I have tried to fix it so far:
Tried pressing 'e' and replacing the quiet splash with nomodeset, same result with both normal flavour and recovery.
Tried copying the xorg.conf from the live CD filesystem to X11 folder on main system drive. Also tried editing it to try and use generic vesa driver.
After installing Ubuntu Server 10.04 LTS, I restarted my machine. I removed the disk, but now when it starts, it never gets to GRUB. Instead, it just takes me to a black screen with a blinking cursor. I can't type in anything and holding shift doesn't take me to GRUB.
View 9 Replies View RelatedI'm installing 10.10 on a desktop with Nvidia 6150 that needs nomodeset on boot or i get the blank screen upon boot. I had to force the live CD to nomodeset when booting from the CD. I was finally able to install, but upon the first boot from the hard drive I'm getting the blank screen again. How do I boot with nomodeset and get to my installed ubuntu. Once I get there i can edit my grub settings.
View 3 Replies View RelatedRecently my laptop running Ubuntu 10.10 has had an abrupt power shutoff (actually several times -- my battery has some problems).
Now when Ubuntu boots, I get the startup screen, but after a few seconds, the screen goes black. I can still boot from the live CD and in fact I am using my computer from the CD to write this post.
A few more details: When I press the power button while my computer is in this "blank" state, I get hard drive activity. Also, if I press "power", and then "enter", the machine actually shuts down.power
My laptop was shut down normally, but when it restarts - it just shows the very first image (Toshiba something....) which is the screen where it says what commands to type to get into bios.
After this - the screen shows nothing more. All black, except some faint (extremely faint) lines...
I don't know - my first thought was that the screen itself was caput, but since it shows the initial screen - I guess it's not...
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedI just installed Kubuntu 10.10 to find out I cannot access the grub menu. I tried alt+f2 but that didn't work. What the real problem is is that I am trying to get the display to turn on at boot since it automatically goes to sleep at boot and cannot be woken up. I could set "nomodeset" for the live cd and it would work fine but I can't find a way to do so when Kubuntu is already installed. Does anybody know how to access the grub menu or how to stop the display from sleeping?
View 2 Replies View Related'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies View RelatedAfter succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View Relatedanother post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies View RelatedIs there any way of making nomodeset permanent one has to reinstall? I know at least 1 distro has an etc/sysconfing/kernel file you can edit to make the value NO_KMS_IN_INITRD=yes
then mkinitrd makes nomodeset permanent Otherwise its a real bind to have to keep burrowing into the grub2 menu each time to make sure it loads.. :>(
I'm trying to upgrade my sister to natty, but it wont boot properly unless I use nomodeset. It didn't need this in maverick, and she doesn't need any proprietary drivers, as she only has onboard laptop graphics (intel mobile 4 series I think..) So when I boot it into the LiveCD the resolution is wrong, so I go into system > preferences > monitors but it wont let me change the resolution as the monitor is listed as "Unknown" I also tried LinuxMint 11 (Katya) but it was the same (it is based on ubuntu anyways so it's not surprising.)
View 9 Replies View RelatedI have the Fedora 14 64bit Live CD on a 4GB USB Flash drive, via Live-USB-Creator. I have bootcamp installed on my Macbook Pro (5,5) with OSX, Windows 7, and Ubuntu already installed. I plan to install Fedora over the Ubuntu.
1.)So, when refit boots up, I choose the EFI USB (Fedora) and the Fedora screen comes up.
2.) I click any key to dismiss the auto boot
3.) I click "e" to edit the Fedora kernel, then I edit the first option and add the line "nomodeset"
4.) I press enter, and then "b" to boot that line. The screen kind of goes whack and a fair amount of super small (unreadable) text comes up on the screen and then just hangs with the blinking (_)
If I go into Grub via "c", and type in "nomodeset" it gives me an Error 27 Unrecognized command. And I've read online to press TAB to go into grub, but TAB does nothing for me.
Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
I have spent the better part of 2 days perusing these forums for assistance. Here is the short story:I run a 7 year old custom build with a 82865G Intel Chipset and a NVIDIA FX5200 graphics card. Had been running a sluggish XP and after adding 2GB of fresh RAM wished to start fresh with my old friend, Ubuntu.
I've tried 10.04 LTS with and without my NVIDIA card installed with no luck. I have successfully installed 10.04 using the alternate install, but this also goes to black. I can hold shift to see GRUB and play around there, but no luck so far. I've also tried 9.10 but have not gotten past the pulsing Ubuntu image. I've seen plenty of support for NVDIA and Intel onboard graphics chips suggesting boot commands like nomodeset and i9015.modeset=0/1...it's all falling short.
I'm heavily leaning towards just installing an earlier LTS or a different linux distro all together. If there no one can help me debug, maybe someone can suggest a distro that will make me happy.
I've installed ubuntu 10.04 onto my Dell Latitude e6510 (through the wubi installer), but I can't get anything except a black screen. I'm pretty new to ubuntu, but after a bit of looking around at graphics issues I found a bunch of boot parameters and tried different combinations of them. i915.modeset=0 Gave me the purple loading screen, until the screen went black and I got flashing caps lock and scroll lock lights.xforcevesa gave me a completely black screen -- not receiving power at all
I also tried noapci, acpi=off, irqpoll, and pci=routeirq as parameters. None of those had any success.I've also tried letting ubuntu boot with a black screen until I heard the African drums and pressing Ctrl+Alt+F1 to go into the console, but the screen stayed black then as well.
I have downloaded Last version of Ubuntu 11.04 and installed it. The installation went correctly with some flickering in display during installation. But the real problem starts after installation, when I turn on my PC and select Ubuntu from GRUB, the screen flickered a lot and then went black and PC got hanged.
View 5 Replies View Relatedeverytime i try to install ubuntu 11.04 the screen is just black is there any fix for this ?
View 6 Replies View RelatedAfter the upgrade from 9.10 to 10.04 resulted in a black screen after reboot, I decided to don't waste more time, backed up my data and made a fresh installation.
First Issue [solved]: After I inserted the Kubuntu 10.04 Live-CD and started the system, I got to the CD's boot-mode selection menu. When I selected "Install Kubuntu", I got the Kubuntu bootscreen, but the system hang up then. I was able to solve this problem through pressing F6 in the boot-mode selection menu and setting "nomodeset". I also had to remove "quit splash" from the boot-entry line. Afterwards the installation process was fine.
Second Issue: I wanted to boot my new installated system, but, off course, got the blank screen again. So I edited the Grub-entry for recovery mode in the grubmenu (replaced "quit splash" with "nomodeset") and booted into recovery mode. I selected "netroot", and installed the proprietary nvidia-drivers with "apt-get install nvidia-current". Afterwards I ran "nvidia-xconfig" to generate the xorg.conf. To solve the blank screen issue, I edited the /boot/grub/grub.cfg the same way I described above and rebooted. Now I don't get a blank screen anymore, but I also don't get an XServer. The system boots now (off course without splash and "unquit"), but drops me into the tty1... When I type "sudo service kdm start", I get into KDM and can login, but I get many errors and crash-reports there. I also don't have any internet. I only have internet when booting in recovery mode and select "netroot".
I'm a bit surprised that Ubuntu released a LTS-Version that causes so much trouble (I've searched the forum and it seems that I'm not the only one with such big problems). Has Ubuntu droped support for NVidia-users?
I tried to install Ubuntu 9.10 on one of them by default installation. For the moment there is only one user declared. The installation seems OK, except that Ubuntu didn't find my PPPoE connexion. When I logged in, I got a blank screen with the mouse cursor (it moved, but when I left or right-clicked nothing happened) and on the left something looking like two 1-pixel wide menus, as if the system had understood there were a dual screen. These menus could roll and unroll, and I think I even once managed to shutdown by going to the last invisible item thanks to the keyboard arrows (I'm not sure, because I had also clicked on ctrl+alt+suppr, so it could be a delayed effect of that).
I restarted the computer several times, to get no more than that. When I'm in Gnome safe, everything is OK but I don't have any root privilege there (I guess it's normal): for instance, I can't set up the internet connexion. My 20" 4/3 Philips screen is recognized. Then I changed the screen frequency: it's still OK for Gnome safe session, but now, in the Gnome normal session, instead of a black screen with 1-pixel wide menu, I get a black background picture with white light coming from above and reflecting to an otherwise invisible floor. The mouse cursor is moving, but this is the only thing which works.
Last weekend, I upgraded my old PC and installed Ubuntu 9.10 on a brand new pc. It worked perfectly for 5 days. When I got home tonight, it wouldn't boot and got stuck on a black screen.
[Code]...
I really am a newby here but I think that the blkid command gives me my uuid. The uuid in the /dev/disk/by-uuid directory is in blue so I'm guessing that this is a symbolic link. And then, when I try to create a symbolic link with the ln command, it already exists... But the issue is that the UUID that is referenced in the error displayed is not the same as the UUID in my /dev/disk/by-uuid directory.
So I decided to upgrade from 9.04 to 9.10 today, I was quite sure there wouldn't be no problems. Well, at least not in the installation, and apparently the system works well too, but there's just one thing...When I boot to the new kernel (2.6.31-19), it does show the new white Ubuntu-logo, but after it's gone, some text flashes through extremely fast, and after that the screen turns black, having two small and white horizontal lines on top of the screen. Soon after this, I can hear the login-window sound. I can log in by pressing enter, and then typing my password, and soon after I press enter again, I can hear the login sound. But still, the screen is black, having those same white horizontal lines on top of the screen, making the use of computer "quite" hard.Right now I'm using the older kernel, but the problem is that the sounds won't work, the resolution is still low like when I had 9.04 (problems with Intel hardware), and CD's won't still be read when inserted into the CD-drive.Here's my "lspci" in case someone wants to know of my hardware a little:
Code:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev
[code]....
I just Installed Ubuntu on my PC (win XP-pro) using wubi, by downloading the .iso from webpage and burned it to cd. The installation went fine, but when I login the screen goes black. I can still see my mouse pointer and one vertical pixel line of the desktop. Could it be the graphics drivers, if so how can I update/change them, via rebooting in safe mode and using command line?
View 2 Replies View RelatedToday I just tried a liveCD of lucid beta2. Unfortunately,just like with alpha5, all I got was a black screen, and nothing else. I tried to switch to terminal with crtl-alt-F1,F2... but it seems to be disabled (why?) I am running 9.10 on a Samsung r20 notebook, with an ATI-Radeon Xpress 1250. Since 10.4 is about to be released, and I really want to upgrade.
View 5 Replies View RelatedI was prompted to do the upgrade and I did it. I was working and was at a point I could restart as asked, and I did. Now I have a black screen and can't get anywhere. I have downloaded the liveCD for 10.04 and this is a massive failure. All I have is about a .25 inch wide space that I have any video of. And this is trying to just run from the disc or trying to do a clean install.
I am getting pretty aggravated and ready to scrap the whole system and re-install 9.10 if necessary. The ONLY thing I see is the new Kubuntu loading screen. Nothing else.
I just upgraded to 10.04 on my laptop and after install, clean-up and reboot the screen goes absolutely black. The initial bios stuff is still there and the GRUB loader text. Then darkness without There is one way to start up and getting screen (which I'm using now). If hitting ESC in grub loader, selecting recovery-mode, selecting re-configure monitor, selecting start up in graphics-safe mode (this session only) it'll work. Other combinations, such as re-configuration and normal reboot or just graphics safe-mode does not work.The only real error message I have obtained is the following:(EE) intel(0): ch701x not detected, got 29, from DVOI2C_E Slave 234Given as pop-up dialogue when going into recovery-mode.My laptop is a Compaq Pressaro M2000. I can provide more details on graphics, but I'm not so fluent in linux, so I don't know what terminal commands to enter to get the right debugging information
View 6 Replies View Related