i have a HP wx8000 with a scsi drive on it that has a max capacity of 65GB. my HDD reports that it has 57.5 Free. it also reports that i have 56.2GB used. i am really confused at this point. it was a brand new install 5 days ago.
View 4 RepliesI use one PC only, I paste some files and folders into the U1 folder. Files upload to the webstore, I can see them via the web. Now, *what* is subsequently used as a *reference* for content? For example, what should happen if I rename a folder in the PC U1 folder? Should the new name later appear appropriately on the webstore? What should happen if I use the web access, and delete a folder in the webstore? The PC U1 folder remains full, does the web store get filled and corrected? At a time when the webstore is complete and correct, if the contents of the PC U1 folder is deleted by me, will the webstore contents act as a form of backup? Or will the webstore contents also get removed by U1 process?
View 2 Replies View RelatedLately however my root filesystem is getting filled up every night-- I come in in the morning and have notices that I have 0 bytes remaining. There's tons of room on the disk, but the root is full. Here's what it looks like with a df -h:
[Code]....
I realized that I had 0 k free on my drive and when I search to find out what was the problem this is what I have found.
In /var/log/ I had two 55GB files, one called "user.log" and the other "syslog", since it had 55GB I had to tail it and came out with this:
lucian@lucian-laptop:~/luciserver$ tail log_2ndfile_55G_tail
Mar 16 15:40:39 lucian-laptop scanadf: io/hpmud/pml.c 375: SetPml channel_write failed ret=31
Mar 16 15:40:39 lucian-laptop scanadf: sane_hpaio_cancel: already cancelled!
Mar 16 15:40:39 lucian-laptop scanadf: io/hpmud/hpmud.c 632: invalid channel_write state
[Code].....
i have an 8gb sandisk micro sd card that i was having problems with, so i decided to zero it out, problem is now i can't repartition it.i have tried gparted, the disk won't appear, but when it is attached, i can see a /dev/sdb in devices that isn't there otherwise.is it possible to create a new partition table on this, and how?also i am trying to 'sudo mkfs.vfat /dev/sdb' but it is saying
View 5 Replies View RelatedI read few threads from 2006, and at that time it seemed there was no good way to save a PDF which had data input in the form fields. Has this changed? Printing is not really an option, since I won't fill these forms in one sitting. When I save with Ubuntu's default PDF viewer, the form field data does not seem to be saved along with the PDF.
View 3 Replies View RelatedA month or so ago, I built a new box. I installed a previously used 320gb hard drive and a newly bought 1TB hard drive.Before formatting anything, I copied all the contents from the 320gb hd to the 1tb hd using windows, since at that time for some reason I couldn't get Ubuntu to read the 1tb drive.At some point, I managed to format the 1tb drive as ext3 (don't know why I didn't have the ext4 option), and copied the files I wanted backed up from the 320gb to the 1tb drive.Once I did that, I prepared to delete the files from the 320gb drive. The thing is I can't find them anymore. I had made a /Storage directory, and now the 1tb is called like that too.The thing is, the 320gb drive is almost full, but it only has my Ubuntu installation. I keep my file in the 1tb drive, so the 320 should be fairly empty. How large can a Ubuntu installation get? 300+ GB???
Where should I look to see what I'm using the space with? I think (this was about two months ago) I created a directory Storagetempo or something like that. How would I look for it?I realize a solution could be just reinstalling Ubuntu on the 320gb drive, since I have all my other files on the 1tb, but that seems too "windowy" to me.
I have 0MB left on my Wubi disk. How do I enlarge the virtual partition for Wubi if I don't have enough space to install anything?
View 7 Replies View RelatedI've prepared a Samba fileserver at work without much too problems and I've prepared a batch file to mount it as z: letter on windows machine at startup.As a sad result the share gets filled with many viruses and became a vehicle of infection.
folder1 ----> folder2 and many other files and folders
folder1 has a condivision access read and write for everyone so I get no problems with passwords for all those who have access but i use ntfs security to do it read only (viruses act like if a pendrive is connected and mainly put infected files just in the "root" of it, in my case in folder 1) and then give everyone full control in folder2. I've been trying to understand how to do this but I'm quite new to linux and smb.conf really scared me. I've tried samba graphical tool which was a lot easier but I'm not able to achieve this kind of result: no need of user password for users to mount the share and no write possibilities in folder 1 and full control in folder 2.
I've an 8GB swap (I know, overkill, but I don't have space issues, and I'd rather have too much instead of too less). The problem is that my physical memory fills up, and the system crashes, but swap usage is ALWAYS 0%
Mem: 8060580k total, 5193436k used, 2867144k free, 1013788k buffers
Swap: 8388604k total, 0k used, 8388604k free, 2262112k cached
Setting aside the fact that I can't trace why memory usage goes up to 8GB with just firefox/terminals/pidgin, why isn't my swap EVER used?
Also, if I run
Code:
# top
2301 hugo 20 0 1887m 665m 38m S 19.9 8.5 267:38.63 firefox-bin
1811 root 20 0 166m 67m 10m S 10.8 0.9 128:04.59 X
1973 hugo 20 0 306m 78m 16m S 0.8 1.0 42:30.04 compiz
2024 hugo 20 0 487m 13m 8836 S 0.2 0.2 2:14.73 Terminal
1980 hugo 20 0 333m 7228 5492 S 0.1 0.1 0:54.49 lxpanel
7048 hugo 20 0 15016 1168 820 R 0.1 0.0 0:00.03 top
(The rest are all "0 0 0 0 S 0.0 0.0")
If add up all of the RES columns, I get <1GB. If I add all the VIRT column, I get about 3GB. Where's the other 2GB being used? This goes up all the way to 8GB, without being able to add up where my memory's going.
I have just recently installed Ubuntu 8.04 (i had 10.04, but the video drivers were not compatible). Here's my dilemna. I run the "df" command and notice that it appears as though the drive is 100% full with no space free. Is that correct? And where do I look for the offending file/directory?
Code:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 304072908 304066468 0 100% /
varrun 1037700 108 1037592 1% /var/run
varlock 1037700 0 1037700 0% /var/lock
udev 1037700 68 1037632 1% /dev
[Code]...
This happened when I was trying to install Ubuntu 11.04 from a disc, when I boot from the USB or CD I create of Ubuntu it gets past the selection menu and then I get stuck at this screen, keyboard is completely frozen, no HDD activity light or anything. This happened the same way when trying to install Ubuntu 10.10 This is an ASUS g60jx laptop, I would have assumed this was fixed by now, is their a special graphic mode I have to enter when installing?
View 6 Replies View RelatedWas wondering if anyone can explain briefly the relationship of "cache" and free memory in the "free" memory command.
View 2 Replies View RelatedDuring playing around sources, synaptic playing I messed up the default list. I know I should have been more careful. Anyways could someone tell me what the default the default sources.list that has free and non free etc for squueze please? I have been trying to get the default list but I cannot find it anywhere. There are alot of lists out there but nothing tagged like the "default" list.
View 6 Replies View RelatedI've got a question on free disk space. I'm currently running CentOS 5.5 on in Xenserver virtual environment. We've had an issue with disk space. My question is as follows: - from a ssh connection i run df -h this gives the value of 90% used leaving me with 9GB. If I use system monitor via a VNC connection the free disk space value is 20GB free on the same volume. Which one is correct? I do use SNMP to monitor the same volume and should alert me when < 10% is free I know this works as I set the alert threshold to < 90% I get an alert.
View 2 Replies View RelatedI have a MythTV backend setup with videos also transcoded to a directory for streaming to my Roku frontend. A week ago, the backend had an issue that caused the hard disk to fill up, which borked a bunch of things up. I've since repaired the damage (and learned a lot about log size settings for logrotate.d). Anyway, my last problem is that a script I wrote to compare the files in the transcoded directory to the MythTV base directory and delete files no longer relevent doesn't work anymore. I get the following error when run by any user, including root:
Code:
bash: ./roku-autoexpire.sh: /bin/bash: bad interpreter: Permission denied
The script worked fine before the hard disk fill, but now I can't seem to get it to work. Both the original MythTV partition and the streaming partition are XFS. Here's the pertinent lines from fstab:
Code:
/dev/sdb1 /var/www/mythroku xfs defaults,auto,grpid,exec,user 0 0
/dev/sdc1 /mnt/mythtv xfs defaults,exec,user 0 0
Permissions for the directories are the following:
Code:
drwxrwxr-x 2 mythtv mythtv 16384 2010-12-13 19:21 /var/www/mythroku
drwxrwxr-x 2 mythtv mythtv 20K 2010-12-13 20:13 /mnt/mythtv
I tried fiddling with the mount options for the partition, but that didn't seem to solve the problem.
Am I asking too much for a FREE OS? Everybody spend their precious time to help others, that's very helpful.But it seems like there is no support from UBUNTU team,how could we even get through the barrier of not using Microsoft's OSes? No free lunch of course, but it seems to me some issues have never really been solved.I read lot's of people have problem with their WIFI, not just for my OLD USB wifi adapter. I don't have problem with WIFI in XP/Server.
I posted here and there, and seems like no answer, and I do not get any reply from UBUNTU support team,forgive me if I run out of google's keywords.I just need a simple answer, is my WIFI going to work in UBUNTU with a layman effort? I like linux and UBUNTU had put great effort in providing me such a great OS, but if a basic internet connection will need to spent sooo much time to setup, and it still doesn't work. IS IT WORTH to switch to UBUNTU at all
Just installed Debian 5 Lenny on my PC and found myself in front of strange problem: 3/4 of my screen is filled by graphics on default, i mean 1/4 of screen is just GREY on logon screen, and then when GNOME starts i got the lower pannel on the bottom of 3/4 of screen, but suddenly i can take it and put it on the bottom, like it should be.
same stuff with maximizng the windows. when i maximize by just pressing one of those right-top buttons - it just fills 3/4 of screen. but if i maximize it by hands at first and THEN press the button - everything feels great.
something inside me says that i should post xorg.conf
[Code].....
I tried to run Fedora 13 from a live CD on my old HP Pavilion a375c desktop (512MB RAM,3GHZ CPU,160GB Hard drive). The installation CD boots, shows the Fedora hourglass, but hangs when the hourglass is filled. I have used the same CD on a Lenovo Thinkpad T61 and a Dell desktop with 512MB memory without any problem. So the problem seems to be on the HP side. I've also tried to boot with CDLinux and Ubuntu live CD on the HP machine. All have the same symptom - hangs at the end of the hourglass during boot. Anything I can do to pass this stage? The HP spec is here: [URL].
View 8 Replies View RelatedI have Soad Linux installed. E17 environment really works fast for me. But I have a question, how do the one make window manager to be more feature filled? For example other e17 Linux distributions has a full path of file directory on the window tools frame so you can simply click on any directory from this list like "Home/Media/Movies" and you are brought back to the selected directory (Home for example). I managed to find how to enable it, but that section of windows manager doesn;t seem to work well, it is too small horizontally so in order to see other directories the one has to click small arrows and scroll. Resizing doens;t allow to make it bigger, how could I fix that?.
Also how do the one make the mounted mediums list on the left, similar like in gnome windows manager? I found a control panel which lets you choose between KDE, Gnome and LXDE (I think) for e17 But changing between them doesn't seem to change anything. Yes I rebooted the pc so it could take the effect, but no changes were made.
I've been able to print with other distros (Mint, Sabayon) without problem so I'm guessing the way my printer is configured with Slack must be wrong. My CX6600 is recognized and when I try to print, it responds, but by printing a page filled with black ink. I have tried printing in Okular, Firefox and OpenOffice with the same result.
View 1 Replies View RelatedTwo days ago I downloaded and installed new updates after upgrading from 10.04 to 10.10. After the update I was informed I needed to restart. Once my laptop booted up again it stayed to a black screen and then filled up with error messages like something about trace call or call trace?
I had no way to get into my system but I did have some minor success starting in an old kernel. However after a while it would freeze like the graphics driver was going wrong.
Two attempt later of reinstalling 10.10 from disc after deleting the drive content and after updating it would go back to the same.
So I have now disabled updates as I haven't a clue on which one(s) is causing these problems.
I am on a HP Pavillion dv7 with nVidia graphics card and running 64amd Ubuntu.
I've just installed Fedora 14 64bit and would like to add new repositories. I read here to do the following command (which as you can see doesn't works) :
Code:
$ su -c 'yum localinstall --nogpgcheck http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm'
[code]....
I have installed F14 yesterday but i can not install rpmfusion repository, the problem is that i can not access the url [URL] so i cant download the files:
rpmfusion-free-release-stable.noarch.rpm
rpmfusion-nonfree-release-stable.noarch.rpm
Title : Author : Price
France : Mark : 40
Persia : John : 50
how i arranged my database. I am trying to write aprogram which does a search either using Title, Author or both.
[Code]....
but i am still unclear on how i am able to make the program check if either on of the input(either $Title or $Author) is not filled up, and if one of it is not filled up, use the other one which is filled to do a search.
I have 160gb laptop. i installed vista in c primary partition which is 25gb and installed ubuntu in d primary partition which is 20gb. A remainig for my data. Now i tried to install CENT OS by formatting ubuntu. I inserted CENT OS DVD and restarted and i selected to delete my /dev/sda2 which is showing 20480mb and it shown me free space. but i tried to add partion /boot of 100mb it got added. but, when i am trying to add / of 3000mb in the remaining 20380mb free space it showing an error message that no free space is available.
View 4 Replies View RelatedHere is the code, which just creates a dynamic array? fills it? and prints.
At the end-point? when doing 'free(digits);' I get a debug messge. But the programm continues to work, or it crashes only on free?
How do I need to change the source-code, not to recieve a message from debugger?
Does the "Exhibit A" section at the bottom of the MPL need to be filled out within the license text itself? Is just including the "boiler-plate" license comment from [URL] in all source files and a verbatim copy of the MPL sufficient to cover a project?
There are blanks within the "Exhibit A" section that look like they should be filled out, yet it doesn't make sense that the license text should need to be modified in addition to the boiler-plate license comment.
I have to design and build a flyable plane in 3 months for an aerospace tech class, and i am looking for something like cad but is free and easy to use, i need to be able to build and view 3D objects
View 9 Replies View RelatedIs there a free svn server online somewhere? I need to get some practice with svn and for keep 'synchronized' working copies of projects between my multiple PCs this would be really handy.Probably it doesn't have Trac as well but if there's one with Trac omg that would be awesome.
View 2 Replies View Related