Fedora :: Swap Never Used And Memory Filled Up
Sep 12, 2010
I've an 8GB swap (I know, overkill, but I don't have space issues, and I'd rather have too much instead of too less). The problem is that my physical memory fills up, and the system crashes, but swap usage is ALWAYS 0%
Mem: 8060580k total, 5193436k used, 2867144k free, 1013788k buffers
Swap: 8388604k total, 0k used, 8388604k free, 2262112k cached
Setting aside the fact that I can't trace why memory usage goes up to 8GB with just firefox/terminals/pidgin, why isn't my swap EVER used?
Also, if I run
Code:
# top
2301 hugo 20 0 1887m 665m 38m S 19.9 8.5 267:38.63 firefox-bin
1811 root 20 0 166m 67m 10m S 10.8 0.9 128:04.59 X
1973 hugo 20 0 306m 78m 16m S 0.8 1.0 42:30.04 compiz
2024 hugo 20 0 487m 13m 8836 S 0.2 0.2 2:14.73 Terminal
1980 hugo 20 0 333m 7228 5492 S 0.1 0.1 0:54.49 lxpanel
7048 hugo 20 0 15016 1168 820 R 0.1 0.0 0:00.03 top
(The rest are all "0 0 0 0 S 0.0 0.0")
If add up all of the RES columns, I get <1GB. If I add all the VIRT column, I get about 3GB. Where's the other 2GB being used? This goes up all the way to 8GB, without being able to add up where my memory's going.
View 12 Replies
ADVERTISEMENT
Aug 16, 2010
RAM for older machines like I use is fairly cheap these days. But flash memory is just as cheap or cheaper. So I'd like to ask about the feasibility of expanding my system's memory using flash memory. And about whether creating a partition for swap on the flash memory, or whether a swap file on the flash device, is the better way to go.
By flash memory I have in mind mainly USB sticks or what are sometimes called "pen drives." But I do also have CF and SD cards that, with the proper cheap adapter (one of which I already own for adapting CF) could be used to create extra swap space. So, what is the current consensus on the feasibility/advisability of using flash memory for swap? I've read about the limited write cycles of flash being an argument against using it for swap. But recent reading indicates to me that the limited write cycles problem applies mostly to older, smaller-capacity flash memory. Some will come out and say that, for larger-capacity flash memory, the life of the device is likely to exceed the amount of time your current computer will be useful (I think I've seen estimates in the range of 3-4 years life--minimum--for newer, higher-capacity flash memory).
A more persuasive argument I've heard against using flash memory for swap is that access times for these devices can be much slower than SATA, and maybe even IDE, hard drives. That would certainly dictate against using flash memory for swap.
So, how about some input on this issue? Anyone using flash memory for swap? If so, what kind (e.g., usb stick or SD/CF)? Are you using a swap file or a swap partition? How's system performance? Likewise, has anyone had flash-memory-used-as-swap die on them? The consequences would undoubtedly be dire. Also, has anyone measured flash memory access times to confirm or refute claims about slow access times? Are some types of flash memory better/worse than others in terms of access times?
View 2 Replies
View Related
Jun 24, 2009
i have a RAM of 1 Gb & swap of 1Gb with fedora11 installed, initially in RAM programme memory uses around 300 Mb & cache uses 600-700 Mb , but after some time it starts using swap memory though my programme memory is still around 300 mb, it keeps on increasing swap memory as a result my system keeps on slowing down & finally when swap memory is 100% system almost stops responding but programme memory is still around 300mb.
View 7 Replies
View Related
Feb 23, 2011
There are plenty of tools for umounting/mounting/automounting usb flash/pen drives/dongles/hard drives. There's the Device Notifier on kde 4, for example.
But what about other devices like headphones, mice, keyboards, modems, etc? A tool for doing this would be very handy.
View 1 Replies
View Related
Sep 12, 2010
When we want to setup a linux system, there is a common a suggestion like set the swap space as twice as big than your physical memory, I want to know why do we need this and how is this suggestion come from?
View 4 Replies
View Related
Apr 20, 2011
I used Gparted to resize the swap area, and doing so changed the UUID so now the swap memory is not activated automatically and hibernation is also inactive. i got some info about this in a previous thread, which became inactive, and could not fix the problem.the output of sudo blkid is:Quote:
sudo blkid
/dev/sda1: UUID="8bcd1749-f82d-4d4a-967d-ee8a3583e8e2" TYPE="ext4"
/dev/sda5: UUID="e02d4dcf-a064-4e6b-a014-a0d9db55f00f" TYPE="swap"
[code]....
View 9 Replies
View Related
Jul 14, 2011
I did a standard install of Ubuntu 9.10, then upgraded to 10.04 LTS. Whenever I run htop I get:CPU [~3.8%] Mem [100/244MB] Swp [87/713MB]And free -mMem- total:244 used:214 free:29Swap- total:713 used:86 free:626It seems like I should be using allocating more memory to swap. I should be using more swap, or if this looks normal
B. If so, how do I re allocate more memory to swap?I am new to linux and still trying to figure out a lot of things.
View 4 Replies
View Related
Jun 1, 2011
I came across this article, which I found to be very interesting and thought share it with you all.
Graphics CardMemory as swap space or RAM disk.
[URL]
View 14 Replies
View Related
Feb 27, 2010
I found out that my CentOS 5.4 linux does not use any swap memory! here is the #top output:
top - 10:02:49 up 27 min, 5 users, load average: 4.22, 3.45, 2.24
Tasks: 173 total, 4 running, 166 sleeping, 0 stopped, 3 zombie
Cpu(s): 71.1%us, 26.1%sy, 0.0%ni, 0.2%id, 0.0%wa, 2.7%hi, 0.0%si, 0.0%st
Mem: 3081388k total, 1729216k used, 1352172k free, 69544k buffers
Swap: 5140760k total, 0k used, 5140760k free, 865316k cached
I wonder why swap memory is not used! I also face auto-restart issue while running few tasks. Does it relate to the swap memory?
uanme -r -> 2.6.18-164.el5
I remember that my i have allocated about 5G for swap memory. However I put it into different partition and far away from root partition due to diskspace partition. Does it matter?
I do not know how to show the swap memory partition or partition map over here.
here is the mount output
/dev/sda2 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
[Code]....
View 2 Replies
View Related
Oct 24, 2010
I have a system with 2G of memory and swap memory of 4G.
This is the output from :
PHP Code:
How could they do to the memory cache to be used as much? Because, occasionally, swap is used and note that the system could use the memory cache does not swap ...
Slackware current 64 multilib.
View 6 Replies
View Related
Jun 20, 2010
Why linux uses swap space, even if there are free physical memory available.
View 4 Replies
View Related
Apr 7, 2010
I run a memory-hungry process (mkcromfs) which consumes more memory than I have physical memory on my latop, so it is paging and swappin and thrashing all the time and loadavg is about 2 (compcache is already in use with usual swap partition as well), but slowly moving forward (Although I afraid it will finally try to allocate >2GB and crash draining 2 days of thrashing).
When I want to use the laptop for something else, I stop the process, start X server, firefox and other programs. The problem is that when I start Firefox the loadavg jumps to 10 and the system becomes almost unresponsive at all (long time to turn on/off caps lock, slow mouse cursor position updates, slow switching from X server to Linux console, slow login).
The stopped mkcromfs still holds a lot of memory (464.8 MiB and slowly falling) and moves it to swap only when more memory is needed for some other program, which results in a great slowdown.
How to tell the Linux to swap out this process entirely (e.g. I'm not intending to resume it in short term), possibly waking from swap other data? Also it will be useful to be able to specify the exact swap device to swap the given process out (for example, mkcromfs's memory is useless in ramzswap).
Update: Now I just write a 400-600M of data from /dev/erandom to tmpfs and it makes mkcromfs to shrink. Is there more proper way?
View 1 Replies
View Related
Dec 10, 2010
Nagios had alerted me that the server had a very high load average exceeding the critical level (17+), when logging onto the server I found that all 4GB of the swap was in use despite the fact that there was 15GB+ of free memory (and that's not even including memory from cache and buffers!) Because it seems all heavily used pages were being stored in swap, the I/O wait on the server became very high, and 4 kswapd daemons were taking up nearly 100% available CPU. This did coincide with an error reported by Bacula during a backup job while changing to a bad tape...
From /var/log/bacula.log:
Code:
10-Dec 02:11 bacula-sd JobId 1898: End of medium on Volume "4097" Bytes=434,170,000,000 Blocks=217,084 at 10-Dec-2010 02:11.
10-Dec 02:11 bacula-sd JobId 1898: 3307 Issuing autochanger "unload slot 4097, drive 0" command.
10-Dec 02:12 bacula-sd JobId 1898: 3301 Issuing autochanger "loaded? drive 0" command.
10-Dec 02:12 bacula-sd JobId 1898: 3302 Autochanger "loaded? drive 0", result: nothing loaded.
10-Dec 02:12 bacula-sd JobId 1898: 3304 Issuing autochanger "load slot 4096, drive 0" command.
10-Dec 02:13 bacula-sd JobId 1898: 3305 Autochanger "load slot 4096, drive 0", status is OK.
10-Dec 02:13 bacula-sd JobId 1898: Volume "4096" previously written, moving to end of data.
10-Dec 03:51 bacula-sd JobId 1898: Error: Unable to position to end of data on device "Tape-1" (/dev/IBMtape0n): ERR=dev.c:1384 read e
rror on "Tape-1" (/dev/IBMtape0n). ERR=Input/output error.
10-Dec 03:51 bacula-sd JobId 1898: Marking Volume "4096" in Error in Catalog.
10-Dec 03:51 bacula-sd JobId 1898: 3307 Issuing autochanger "unload slot 4096, drive 0" command.
10-Dec 03:58 bacula-sd JobId 1898: 3301 Issuing autochanger "loaded? drive 0" command.
10-Dec 03:58 bacula-sd JobId 1898: 3302 Autochanger "loaded? drive 0", result: nothing loaded.
10-Dec 03:58 bacula-sd JobId 1898: 3304 Issuing autochanger "load slot 4098, drive 0" command.
10-Dec 03:58 bacula-sd JobId 1898: 3305 Autochanger "load slot 4098, drive 0", status is OK.
10-Dec 03:59 bacula-sd JobId 1898: Wrote label to prelabeled Volume "4098" on device "Tape-1" (/dev/IBMtape0n)
10-Dec 03:59 bacula-sd JobId 1898: New volume "4098" mounted on device "Tape-1" (/dev/IBMtape0n) at 10-Dec-2010 03:59.
At the same time, these messages starting occuring in /var/log/messages:
Code:
Dec 10 03:51:47 07 kernel: Mem-info:
Dec 10 03:51:47 07 kernel: Node 0 DMA per-cpu:
Dec 10 03:51:47 07 kernel: cpu 0 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 0 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 1 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 1 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 2 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 2 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 3 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 3 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 4 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 4 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 5 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 5 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 6 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 6 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 7 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 7 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: Node 0 DMA32 per-cpu:
Dec 10 03:51:47 07 kernel: cpu 0 hot: high 186, batch 31 used:162
Dec 10 03:51:47 07 kernel: cpu 0 cold: high 62, batch 15 used:48
Dec 10 03:51:47 07 kernel: cpu 1 hot: high 186, batch 31 used:0
Dec 10 03:51:47 07 kernel: cpu 1 cold: high 62, batch 15 used:0
Dec 10 03:51:47 07 kernel: cpu 2 hot: high 186, batch 31 used:0
Dec 10 03:51:47 07 kernel: cpu 2 cold: high 62, batch 15 used:0
Dec 10 03:51:47 07 kernel: cpu 3 hot: high 186, batch 31 used:18
Dec 10 03:51:47 07 kernel: cpu 3 cold: high 62, batch 15 used:0
Dec 10 03:51:47 07 kernel: cpu 4 hot: high 186, batch 31 used:159
Dec 10 03:51:47 07 kernel: cpu 4 cold: high 62, batch 15 used:56
...
Dec 10 03:51:47 07 kernel: Node 3 HighMem per-cpu: empty
Dec 10 03:51:47 07 kernel: Free pages: 732052kB (0kB HighMem)
Dec 10 03:51:47 07 kernel: Active:4232128 inactive:3071288 dirty:158210 writeback:0 unstable:0 free:183320 slab:256840 mapped-file:289545 mapped-anon:3805487 pagetables:13063
Dec 10 03:51:47 07 kernel: Node 0 DMA free:10796kB min:4kB low:4kB high:4kB active:0kB inactive:0kB present:10356kB pages_scanned:0 all_unreclaimable? yes
Dec 10 03:51:47 07 kernel: lowmem_reserve[]: 0 3512 9067 9067
Dec 10 03:51:47 07 kernel: Node 0 DMA32 free:213332kB min:2500kB low:3124kB high:3748kB active:1794108kB inactive:1463220kB present:3596296kB pages_scanned:64 all_unreclaimable? no
Dec 10 03:51:47 07 kernel: lowmem_reserve[]: 0 0 5555 5555
Dec 10 03:51:47 07 kernel: Node 0 Normal free:41028kB min:3952kB low:4940kB high:5928kB active:3409444kB inactive:1471120kB present:5688320kB pages_scanned:0 all_unreclaimable? no
Dec 10 03:51:47 07 kernel: lowmem_reserve[]: 0 0 0 0
Dec 10 03:51:47 07 kernel: Node 0 HighMem free:0kB min:128kB low:128kB high:128kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
Dec 10 03:51:47 07 kernel: lowmem_reserve[]: 0 0 0 0
Dec 10 03:51:47 07 kernel: Node 1 DMA free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
...
Well to cut a long story short, I fixed the problem by disabling the swap partition with 'swapoff'. After about 30 mins all the swap was freed and the server went back to normal. I don't dare reactivate the swap partition and unfortunately as this is a live server which currently has no fail over, I can't reboot either
Server Spec:
4 * Dual-Core AMD Opteron(tm) Processor 8214
32GB DDR2 ECC RAM
RHEL 5.5, 2.6.18-194.11.3.el5 SMP x86_64
Running many KVM VMs (All CentOS x64) and kksmd is used.
bacula-dir Version: 5.0.0
IBM Tape Drive using lin_tape module version 1.34.0 according to modinfo
And before anybody asks
# sysctl vm.swappiness
vm.swappiness = 10
View 5 Replies
View Related
Feb 2, 2011
In our cluster, both the server and worker had been gone to swap and the performance is extremely slow. Although currently the memory is free but I don't know why the in the swap area is still being there and ubuntu doesn't move them to the memory and empty the swap.
On the other hand, when I run
Code:
sudo swapoff -a
on the server it says:
Code:
mahmood@server:~$ sudo swapoff -a
[Code]....
View 10 Replies
View Related
Apr 6, 2010
clarify me with ulimit output and memory limit?
ulimit -a output:
core file size (blocks, -c) unlimited
data seg size (kbytes, -d) 1572864
[code]...
View 2 Replies
View Related
Jun 24, 2010
I tried to run Fedora 13 from a live CD on my old HP Pavilion a375c desktop (512MB RAM,3GHZ CPU,160GB Hard drive). The installation CD boots, shows the Fedora hourglass, but hangs when the hourglass is filled. I have used the same CD on a Lenovo Thinkpad T61 and a Dell desktop with 512MB memory without any problem. So the problem seems to be on the HP side. I've also tried to boot with CDLinux and Ubuntu live CD on the HP machine. All have the same symptom - hangs at the end of the hourglass during boot. Anything I can do to pass this stage? The HP spec is here: [URL].
View 8 Replies
View Related
May 9, 2010
I have 2G of physical memory and 1G of memory swap. Very rarely the memory swap is used and when usage is around 1% while, then gets a lot of free physical memory...My question is:It is possible to "clean up" the memory swap. Or better still (I think). It is possible to spendphysical memory for data that is in memory swap?
View 14 Replies
View Related
Feb 7, 2011
Fedora 14 xfce
HP Mini 210
I am looking to buy some memory for my netbook. Currently I have 1 GB of DDR3 memory. However, the specification says that 2 GB of memory is the max. However, when I do the following it says that 4GB is the max:
[Code].....
View 3 Replies
View Related
Mar 20, 2011
Does one need to Check the Swap filesystem, from time to time
View 4 Replies
View Related
Dec 7, 2010
Lucid on an Acer Travelmate800.Can anyone tell me why I have 0k for swap space? I allocated swap which I can see in my Disk Utility's 'volumes' display.
View 5 Replies
View Related
Jan 4, 2010
I use one PC only, I paste some files and folders into the U1 folder. Files upload to the webstore, I can see them via the web. Now, *what* is subsequently used as a *reference* for content? For example, what should happen if I rename a folder in the PC U1 folder? Should the new name later appear appropriately on the webstore? What should happen if I use the web access, and delete a folder in the webstore? The PC U1 folder remains full, does the web store get filled and corrected? At a time when the webstore is complete and correct, if the contents of the PC U1 folder is deleted by me, will the webstore contents act as a form of backup? Or will the webstore contents also get removed by U1 process?
View 2 Replies
View Related
Jun 18, 2010
Lately however my root filesystem is getting filled up every night-- I come in in the morning and have notices that I have 0 bytes remaining. There's tons of room on the disk, but the root is full. Here's what it looks like with a df -h:
[Code]....
View 4 Replies
View Related
May 30, 2010
I have just recently installed Ubuntu 8.04 (i had 10.04, but the video drivers were not compatible). Here's my dilemna. I run the "df" command and notice that it appears as though the drive is 100% full with no space free. Is that correct? And where do I look for the offending file/directory?
Code:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 304072908 304066468 0 100% /
varrun 1037700 108 1037592 1% /var/run
varlock 1037700 0 1037700 0% /var/lock
udev 1037700 68 1037632 1% /dev
[Code]...
View 2 Replies
View Related
Feb 16, 2010
i have a HP wx8000 with a scsi drive on it that has a max capacity of 65GB. my HDD reports that it has 57.5 Free. it also reports that i have 56.2GB used. i am really confused at this point. it was a brand new install 5 days ago.
View 4 Replies
View Related
Mar 16, 2010
I realized that I had 0 k free on my drive and when I search to find out what was the problem this is what I have found.
In /var/log/ I had two 55GB files, one called "user.log" and the other "syslog", since it had 55GB I had to tail it and came out with this:
lucian@lucian-laptop:~/luciserver$ tail log_2ndfile_55G_tail
Mar 16 15:40:39 lucian-laptop scanadf: io/hpmud/pml.c 375: SetPml channel_write failed ret=31
Mar 16 15:40:39 lucian-laptop scanadf: sane_hpaio_cancel: already cancelled!
Mar 16 15:40:39 lucian-laptop scanadf: io/hpmud/hpmud.c 632: invalid channel_write state
[Code].....
View 2 Replies
View Related
Sep 4, 2010
i have an 8gb sandisk micro sd card that i was having problems with, so i decided to zero it out, problem is now i can't repartition it.i have tried gparted, the disk won't appear, but when it is attached, i can see a /dev/sdb in devices that isn't there otherwise.is it possible to create a new partition table on this, and how?also i am trying to 'sudo mkfs.vfat /dev/sdb' but it is saying
View 5 Replies
View Related
Oct 2, 2010
I read few threads from 2006, and at that time it seemed there was no good way to save a PDF which had data input in the form fields. Has this changed? Printing is not really an option, since I won't fill these forms in one sitting. When I save with Ubuntu's default PDF viewer, the form field data does not seem to be saved along with the PDF.
View 3 Replies
View Related
Dec 13, 2010
I have a MythTV backend setup with videos also transcoded to a directory for streaming to my Roku frontend. A week ago, the backend had an issue that caused the hard disk to fill up, which borked a bunch of things up. I've since repaired the damage (and learned a lot about log size settings for logrotate.d). Anyway, my last problem is that a script I wrote to compare the files in the transcoded directory to the MythTV base directory and delete files no longer relevent doesn't work anymore. I get the following error when run by any user, including root:
Code:
bash: ./roku-autoexpire.sh: /bin/bash: bad interpreter: Permission denied
The script worked fine before the hard disk fill, but now I can't seem to get it to work. Both the original MythTV partition and the streaming partition are XFS. Here's the pertinent lines from fstab:
Code:
/dev/sdb1 /var/www/mythroku xfs defaults,auto,grpid,exec,user 0 0
/dev/sdc1 /mnt/mythtv xfs defaults,exec,user 0 0
Permissions for the directories are the following:
Code:
drwxrwxr-x 2 mythtv mythtv 16384 2010-12-13 19:21 /var/www/mythroku
drwxrwxr-x 2 mythtv mythtv 20K 2010-12-13 20:13 /mnt/mythtv
I tried fiddling with the mount options for the partition, but that didn't seem to solve the problem.
View 4 Replies
View Related
Feb 19, 2010
I know it's possible, but does anyone have a URL or tutorial on how to do this?
View 3 Replies
View Related
Nov 9, 2010
Just installed Debian 5 Lenny on my PC and found myself in front of strange problem: 3/4 of my screen is filled by graphics on default, i mean 1/4 of screen is just GREY on logon screen, and then when GNOME starts i got the lower pannel on the bottom of 3/4 of screen, but suddenly i can take it and put it on the bottom, like it should be.
same stuff with maximizng the windows. when i maximize by just pressing one of those right-top buttons - it just fills 3/4 of screen. but if i maximize it by hands at first and THEN press the button - everything feels great.
something inside me says that i should post xorg.conf
[Code].....
View 1 Replies
View Related
