When I print from OpenOffice Writer, some characters are replaced by random characters. For example, this morning all capital "I"'s were replaced by "�" (German special character), a "J" was replaced by "t", and so on. But not all characters are replaced, most are correct.
In addition, the top of the documents are cut off, as if there is an overly wide top margin where the printer cannot print.
I exported the document to PDF and printed from Acrobat Reader, and everything was fine. No problems!
I'm running the Lucid release candidate (but the problem has bugged me for a while now), with a Brother HL2030 printer.
When I try to print in Openoffice, whether it be buy the File menu, or the print icon, or the keyboad shortcut control-p, it always freezes and I have to force quit. This is very annoying; what can I do?
In general, OpenOffice is quite buggy. My latest problem has been printing. I have this .dot file. When I print it to a networked printer, the document never prints. However, these work:Print to PDF. Printing to a file, transferring the file to the destination machine, and printing it works. Transfer the document. If I print the document directly on the destination system using LibreOffice, it works fine. Printing a web page. This works fine. Since I have a workaround, it's not so crucial that this be fixed. I'm just venting .
I am using LibreOffice 3.3.2 Final on a 10.10 Ubuntu Laptop.Everything I print from LibreOffice and Openoffice is printed ~2 cm too high. Printing from other programs as Document Viewer and GIMP is just fine. It's not a settings problem, Ive checked everything hundred times. I am printing on HP Deskjet connected to a wireless router with CUPS 1.4.4 Driver.
I have a Konica 2530DL colour laser and have used it with versions from 6.06 onwards.
However now, with 10.10 I find I cannot print at from most apps eg OpenOffice or PDFs. I get errors on video frame showing on the printer but nothing obvious on the PC.
Test print and gedit text prints works fine and so does using a VM with Lucid running on the same host prints fine too from anything.
Can't see any other comments about this problem anywhere but I know the printer is fairly common and has worked well with Linux in the past.
Using it with IP printing on port 9100 and allow the installation to detect and select the driver. Not setup anything clever and I have the same issue with a Lucid upgrade to 10.10 or a clean install. However the VM running Lucid prints fine. Must be something changed on Maverick somewhere.
I'm trying to print a spreadsheet from Openoffice 3.0.1 (Xubuntu 9.04), I'd like to use the A3 pagesize but the Print dialog shows only A4 and Letter.. Other applications work fine.
I expected more from ubuntu 10.4 with regards to printing with exact size photos and with poor auto colour printing but the situation remains unchanged! for instance .. the photo size configurations for ubuntu/fspot/gimp and others are not compatible with my printers (HP and Brother) .. here in Europe a typical standard size photo (10x15inches or 150x100mm are not even on the Ubuntu listing? I have tried all listed possibilities including "custom" (which does not seem to ever work correctly?)and the result at best is photos with uneven boarders or at worse my printer goes a bit crazy with much wasted photo paper and expensive ink ...even photos selected for "no boarders" still produces photos with the self same uneven boarders.
I have tried pretty much everything over time following advice in this forum and including using HPlip and updating drivers required for my Brother printer but the root problem seemingly lies with the Ubunto photo size setup listing. Working with Ubuntu over the years I have found that it can do pretty much everything that Windows can do except for this dam ongoing photo quality and configuration problem.
Thunderbird does not work properly in 10.04. Program windows come up blank with only the borders. Clicking on items on the menu often does nothing and when it does open a window like mail settings of fail to connect there is nothing inside the border. I have un-installed and reinstalled with the same results. All other programs seem to work fine. Could not find anyone with same problem. This is the same on several computers not just one.
I bought a 2nd hand DDR 1GB memory chipset a few days ago and inserted it in to spare slot on motherboard. However unsure if memory is working properly because bios does not recognise it and neither does Linux but system does appear to run a lot smoother with programs loading faster. If there is a test I can perform to check if memory is working fine or simply return back to shop I bought it? Computer is a DELL Optiplex 170L mini tower system.
I just managed to the one thing I wasn't supposed to do. I managed to mix up my drives and install Ubuntu on the wrong drive. I realized it seconds after starting the partitioning step but too late. It never started copying data but the new partitions are there. Is there any way of getting my data back. It's many photos aso that I don't have a backup of.
I don't want to "fsck" things up even more so I figured I'd ask if anyone has managed to recover from this.
I'm trying to install a language-pack for my OpenOffice, but there seems to be a dependency-problem. Maybe someone has a suggestion. FC12, x64 OOo.x64 3.1.1
the samba seems not working ever since i fresh install from system. When i want to share a folder, error message appears :
Samba's testparm returned error 1: Loaded smb config files from --parameter-name=usershare allow guests lp_load: refreshing parameters from --parameter-name=usershare allow guests params.c:OpenConfFile() - Unable to open configuration file "--parameter-name=usershare allow guests": No such file or directory Error loading services..
Why is that? is that i havent install its other installation? i installed it from "apt-get install". But when i go to other Windows XP, i can see this [ubuntu box] at the [network place]
I started #aptitude safe-upgrade and switched to another user. Gdm showed the error and hung down the system. So I did reboot. After reboot if I start totem I see such a result:
Code:
$ totem ImportError: No module named gobject ** (totem:1978): WARNING **: Could not import pygtk ImportError: No module named pygtk
[CODE]....
I tried to complete the upgrade with aptitude safe-upgrade, but it shows that all packages are up to date. I am afraid that some other packages are affected by this crash. How can I repair system?
I registered here and got Ubuntu a couple days ago. After setting up and connecting to my wireless LAN I went on the internet and uploaded the WINE source. However, after about 5-10 seconds of staying on the internet it all of a sudden stopped working (the internet stopped its connectivity) that is. And I was still connected to the wireless LAN. I tried to reconnect like most people would do, and I was not able to connect again (Would prompt me for password continuously to no avail). There isn't a problem on my windows 7 (I'm able to connect to LAN/internet).
I've been trying to rip DVD's using AcidRip but whatever DVD I try I get the same error from AcidRip - Can't Read DVD track. Faulty Disc?
After reading the forums I've tried /dev/dvd ,/dev/sr0 (Found by using the Disk Utility), /Media/DVD Title etc and tried running AcidRip both as myself and Sudo without success.
I have an nfs share that mounts automatically when kde starts.
Code:
wendy@DellNB:~$ cat .kde/Autostart/mountNAS.sh #!/bin/bash mount ~/TestShare #echo "NAS Mounted"
[code]...
Gimp works fine editing and saving photos from/to the nfs share. kWrite can do its thing and read/create files on the NAS. Files I create with vim are visible and editable under windows. OpenOffice however, when I try an open a file I get "file is locked by unknown user." I open as copy and try saving to the share with a different name... No Dice, error saving to share the file is created on the share but it is empty. I did some reading and found a post that said to comment a line from a file called soffice, which I cannot find.
I have an XD card with lots of pictures in it which suddenly stopped working, it gives me "card error" messages in my camera (and any other one) and it refuses to mount on my laptop's card reader (which does work in F11 for XD cards, I've tried other ones).So I'm trying to use some program to make an image of what's in the card, like ddrescue or dd_rhelp. But they all need me to mount the disk, which I just can't. I have tried to mount it manually, but I'm not even sure what device I should point to.
So my question is, how can I mount a faulty drive in such a way that any of these programs can make an image? Or maybe there is a smarter way to try to get my pictures back? (There are some non-free programs in Windows which may seemingly help, but I'd like to figure out how to do this in Linux).
I upgraded from 11.2 to 11.3 My task bar looks a little bit "strange" after the upgrade Here you can find out how it looks like [URL] You can see the American flag that (left) that appears a little bit strange as well as at the right side the kwallet icon to be over the time. As I expand the taskbar to the left and then reduce it to the right these strange things keep happening not to the same icons all the time but to some of them.
I would like to remove from the Thunderbird every faulty email message that it keeps in his "memory". For example if accidentally I send an email to faulty@email.com every time i press f to the To: field the faulty@email.com entry appears.
Is it possible somehow to remove these email addresses?
My Ibuntu 10.4 system can't be updated because of error message:"Segmentation faulty tree" coming from apt-get check. It reads 50% of then stops. It shows reading the package lists, the Done.
I'm having a variety of problems getting a new PC working properly, getting a reliable wifi connection is one of them. Earlier today I upgraded to 10.10 using my wife's account and download speeds were frequently at a reasonable 800kbps at times. This evening my son complains about the slow speed and a test shows 133kbps download with 616kbps upload. My own PC connected by wire to the router works OK.
A couple of days ago this problem seemed resolved when I installed Wicd but didn't configure it. I thought Network-Manager would have been removed but was still present. However, a downloads test showed 6Mbps. After today's upgrade slow downloads have returned.
I'm currently using this PC with a wifi link to the router and am connected to the Forum. If I hover the mouse pointer over the N-M toolbar symbol a window opens saying-
Wireless network connection 'Auto MYESSID'active:MYESSID(67%) If I right mouse click on the N-M symbol and select Edit connection... the wireless window reports that I was last connected 3 days ago. My own PC's wired connection window says against Auto eth0 that I've never used this. Both these are untrue. I wondered if having a hidden ESSID doesn't help? I'm left thinking that the rt2500 based wifi card needs replacing. We're some distance from other houses.
I saw that on every computer in which I installed LXDE on Debian 8 (the problem was not existing on Debian 7.8.0)
So I decided to use mate-desktop-environment but a brand new problem (always ) made his apparition when I try to use tightvncserver on a Mate desktop (no task bar, and memory growing GB after GB up to the memory explosion after 1 or 2 minutes with 16GB RAM -I will post another subject for that once I will know more things about it - since it is, after all, an huge problem causing the computer to crash if "reboot" our "vncserver -kill :1" is not quickly done)
But here talking about LXDE taskbar: others LXDE users, do you have this problem with the icons ?
opensuse 11.2 64 bits installed in a RAID1 software array. Everything worked smooth during installation, the system boots, the mdx partitions are in their places, did the upgrades, configured the way i wanted, booted several times... all ok. Then i wanted to test the RAID and since its RAID1 i just disconnected 1 drive and started the computer. All what i got is
Disconnect the other drive, then i got GRUB loading stage 1.5 GRUB loading, pleas wait... (hd1,0)/message: file not found and a simple boot menu (in character mode) shows up with the 2 options SUSE LINUX and Failsafe -- SUSE LINUX (no version number)
So now that it's working the Server can't be seen from the internet. I see that the router changed all the ip address so I changed the fort port forwarding on the router and still not working. And the external ip address has not changed.
Using Ubuntu Maverick and Totem, DVD playback has a slightly shaky picture and a little static at the top and bottom of the picture. Also, top level menus sometimes don't display, or the menu displays but movie won't play, or just nothing happens when trying to play a DVD movie. This problem is happening on two completely different boxes with clean installs. DVD playback seemed OK on Kubuntu and Xubuntu 10.10, as was OK on 10.04. Is this a known issue? And if so, is there a patch?
I am not sure if this is the correct section but it has to do with a faulty HD. So, the datacenter confirmed that the HD needs to be changed. They put it back and asked me when they should replace it. I told them to wait a bit.
Since then, one of the VPS hosted in this server is booting on "initramfs"
I wanted to read out a friend's windows hard drive, so I took the IDE connection from my CD drive and plugged it into the hard drive.
Now at boot time at the stage where it usually checks all partitions, linux complains about "zero length partition of that harddrive" and then stops giving me an emergency login.
Maybe that hard drive is actually faulty, even though I see all partitions correctly in windows. What can I do to make linux stop checking it? Is there a boot time option?
I suppose later I can manually mount a /dev/sdb or so device. I just have to figure out which
PS: what the easiest way to check which devices/partitions are available to mount?
Guy Im having issues getting my NIC to work. I dont think the NIC is faulty because when I plug the network cable in I get the green and orange light and I get the below result when running lspci | grep net
