Ubuntu :: 11.04 Buttons Moved To The Right Menu Button Error
Jul 10, 2011
I am using ubuntu 11.04 and I moved the maximize, minimize and close buttons to the right corner using gconf-editor besides that, I added the menu button to the left corner that's the one which is causing problems.
Whenever I click it, all window decorations (meaning borders) disappear.
I end up with two options, either logging out and back into ubuntu, what restarts all programs (as well as compiz as far as I understand) and the problem is gone (at least temporarily) the other nonpermanent fix is to disable and reenable window decorations in the compizconfig settings manager, the result of that action is not really a fix, since it leaves my top panel (which is usually transparent) completely scrambled
I know how to make another button act as the middle button but how can I map several mouse buttons to the middle button? xmodmap complains if I repeat button numbers in the pointer option.
after i udated to ubuntu 10.04LTS, i applied updates one night and after reboot the minimize, maximize and close buttons had moved from the upper right corner of ALL windows to the upper left corner. i would like to move them back to the original location but don't know where or which config file to look in.
Today my minimising, maximising, and closing buttons on the window border moved from the right to the left without any apparent reason. (At least i dind't ask them to). The other computer I work on didn't change though.
I use Gnome, Dust Sand theme on 10.04.
I really dislike having them there, how can i move them back where they belong?
How do I get the close minimize maximize buttons back on the right? I looked in appearance, and all of the little previews of the themes have them on the right, but they are on the left when I apply them. Is there any way to change them back? this is very frustrating.
I'm currently trying to set up the extra buttons on my Tablet PC and I can't find a way how to get a working button code to show up. I have used the xev command and it doesn't show up anything when I press the buttons. When I tried the dmesg command I get this:
I have a Logitech ambidextrous trackball, with a left and right mouse button. The trackball device also has two smaller left and right buttons. I'd like to know how those two smaller buttons are addressed. Ultimately, I'd like to assign certain keystrokes to them, to make work faster. For example, ALT+<right arrow> moves a browser back one page. how to name these keys, or whether/how I should address this USB mouse. FWIW, I'm actually using it through the PS/2 mouse adapter, since that doesn't take a USB slot.
Ive been using opensuse for a little while now. Recently ran into a problem My favorite mouse broke, so i went out and got a travel one. It has a very toucht third button under the scroll wheel. Apperently this button is to paste, but every time i scroll, it makes my life miserable, especially when im reading a lengthy page in firefox. I cannot figure out how to program the buttons. Ive googled, and seen some programs that MIGHT help. but this seems to be something that is built in to the OS. The mouse yast plugin doesnt give you the choice of shuting off the third button, or even reassigning it. I want the paste functionality GONE from my **** mouse
Whenever my cursor is in the menu, Applications, Places, System etc.... I can not adjust the sound via the laptop buttons.I've had this problem for ages, but was wondering if anyone else had experienced this.
I've been attempting to install Virtualbox 3.1 on my desktop using the "Add and Remove Software" facility. All attempts result in failure with the "Details" error message box issuing
Quote: Failed to fetch [URL]...armic_i386.deb 302 Moved Temporarily [IP: ::1 3142] I have recently freshly installing Karmic and apt-cacher-ng after a disk crash. I was running Hardy and apt-cacher previously. I successfully installed Virtualbox 3.1 on my laptop through apt-cacher-ng on the desktop machine. However, I now realise that I had neglected to change the entries in /etc/apt/sources.list on my laptop from
I've just upgraded to 11.04 and really like it so far, everything seems to be running smoothly and I had no issues apart from a broken Emerald which I removed (and installed compiz-gnome and then made gtk-window-decorator the default, which fixed Unity segfaulting on Emerald).
My problem now is that when I use the Unity dash to search for something, it takes a while to search and then finds nothing. I'm pretty sure I should have things like "text editor", "gimp", "update manager", so I would think this is some manner of bug.
In addition to that, the following buttons don't do anything if I click on them:
- Media Apps - Internet Apps - More Apps - Find Files
Whenever i click on an icon in the Places pull down menu (except Computer, Network, Connect To Server and Search For Files) nothing happens except I get Ktorrent popping up and claiming it cant open the selected Drive or Folder because it is not a valid torrent file. Which is fair enough, 'cos its not a torrent. Its the entry for my Desktop in a pull down menu in my O/S, and it does this even when I haven't been near Ktorrent in the previous hundred clicks of the mouse, or if Ktorrent is not running. If i un-install Ktorrent, the error message changed, but the correct windows did not open when asked from the Places pull down, and the error returns when its re installed- well, tried it once, in a very basic fashion through the software center.
I think the problem has been caused by two containing folders of torrent data files that have become stuck as entrys in the Pllaces menu- cack handed off me folks, was playing with new mouse settings as I was playing with new mouse settings. Problem may also be something to do with the problems I have been having with Ktorrent- it refuses to accept torrent files unless through a magnet link, bringing up the same "parse error- not valid torrent file" error message as comes up from the Places menu, only of course citing the torrent i just tried, when I know for sure the file is valid and operational because Transmission has no problem with it.I really hope someone can help me fix this, as formatting and re-installing will be a real ball ache, as I'm a new user who's spent the last week learning and starting the customization process, and I was just getting to think about backing it all up.System is Ubuntu 10.10 64 bit, Pentium quad core, one 250Gb system drive and another larger drive called storage that appears under Media path both SATA2, no DVD drive as connector is in the post.
I work on a laptop and typically have a USB mouse plugged in. Each time I start an X session, I switch my mouse buttons with an: Quote:
xmodmap -e "pointer = 3 2 1"
If I decide to unplug the mouse and work with the touchpad, I must always reverse the options again to pointer = 1 2 3, or else, while the right and the left button still work as a left-handed mouse, tapping, instead of acting like a left-click, gives a right-click menu. My touchpad is listed as:
'ImPS/2 Synaptics TouchPad' using the evdev driver.
I admit that I haven't played much with alternate xmodmap configurations, but I'd like to sort this out. It's even more confusing since I don't have a xorg.conf and, if I manually add one, despite having tried repeatedly, I can't make X-server to read it.
just want to report "Right Mouse Click Freeze" on Ubuntu 10.10. When I click on anything with my right mouse button to open options menu it freezes and does not open menu. Sometimes when I shake my mouse left/right a bit it opens that menu, but this does not work always. It seems like xserver issue, but I'm not sure since I'm not expert in linux yet. It's very annoying issue that I would like to resolve asap.
My System Specs: Intel Core 2 Quad Q6600 @ 2.40GHz CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 800 (PC2 6400) Western Digital 250 GB Hard Drive Ubuntu 10.10 64-bit (Kernel Linux 2.6.35-22) (Used Desktop Install CD)
I was using lucid since beta 2 without problems, but since few days I can't get a menu when I click on the right mouse button. Doesn't work on the desktop or when for example I want to rename a file using the right mouse button. Is this a bug from gnome or a new properties?
I've switched my non-maximized window button locations back over to the right with gconf-editor but i'd like to change the global menu buttons over to the right as well.I've had 20 odd years working that way. I can't seem to find an option in gconf-editor and if google has the answer I'm not using the correct search terms.
you know how like lxpanel/fbpanel have a menu button that displays the system menu,etcHow would I add a menu buttuon to wbar in karmic/squeeze/sid?I downloaded and perused the source,etc of all three, lxpanel, fbpanel, etc but cant figure out how it works as it does for other "panels"
I've been using this feature since Win3.1 days. Double-click the menu button on the top-left of the window to close it.It doesn't work for me right now in KDE, and I can't find any option to enable it. Googling gave a few hits of people requesting this feature in gnome, but no clear instructions on how to enable it in KDE or whether it's possible. (Though perhaps my Google-fu is just weak...)
how can I stop selecting items in menus on mouse button release? Sometimes I open a menu and move the mouse slightly before releasing it and I accidently select the item on the menu, which is annoying.
So I'm using Iceweasel 4 from the mozilla.debian.net repos. I recently upgraded a friend's computer from Windows Vista to Debian Linux. I went over to his house to chill and hopped on his computer to check my Facebook and noticed that his Iceweasel has the Firefox 4 single menu button at the top left of the window. He's not a tech-savvy user so he probably enabled this feature by accident, but I can't seem to figure out how to do it. He's using the same version of Iceweasel as myself by the way.
I really like to add some items under mouse right button menu. For example when i right-click on the desktop i like to have as first entry "open konsole".
i have a problem with th home folder button. When I click the button from the drop down ''PLACES'' menu i get this "Error File not found'' but if i go to places>computer>home folder, then it opens. If i type in ''CWD" i get this "/home/piepie''.so the home folder does exist, and if i type /home/piepie is a directory.
I'm running Slackware 13.37 with XFCE. I'm trying to increase the menu button size. I remember having succeeded in doing this with XFCE 4.2, but I unfortunately forgot to write down how I did that.
just click the [Computer] button at the left-bottom corner of the GNome desktop, the menu will shown, now press the printscreen button [PrtSc], nothing happen. no screenshot was made.or open any application , then click the menu like [file], let the menu list shown, then press [PrtSc] button, same thing, nothing happen.
