General :: When Switch Buttons In Synaptics Touchpad - Tapping Gives A Right-click Menu
Jan 23, 2010
I work on a laptop and typically have a USB mouse plugged in. Each time I start an X session, I switch my mouse buttons with an: Quote:
xmodmap -e "pointer = 3 2 1"
If I decide to unplug the mouse and work with the touchpad, I must always reverse the options again to pointer = 1 2 3, or else, while the right and the left button still work as a left-handed mouse, tapping, instead of acting like a left-click, gives a right-click menu. My touchpad is listed as:
'ImPS/2 Synaptics TouchPad'
using the evdev driver.
I admit that I haven't played much with alternate xmodmap configurations, but I'd like to sort this out. It's even more confusing since I don't have a xorg.conf and, if I manually add one, despite having tried repeatedly, I can't make X-server to read it.
The relevant part of lshal output: Quote:
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input'
info.capabilities = {'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string)
info.product = 'ImPS/2 Synaptics TouchPad' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input' (string)
[Code]......
View 1 Replies
ADVERTISEMENT
Mar 27, 2011
Since when I installed Debian, I couldn't manage to make the tapping function of this touchpad work on my laptop - a Dell Latitude C610, with Debian squeeze. As suggested on [URL], I created a xorg.conf file with
Xorg :1 -configure
After that, I opened the file for editing it. There was no line regarding the Touchpad. The closest to that I found was
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
I tried adding the lines on [URL] ... C_Xorg_7.5 to the file, but it didn't work. I also tried installing gsynaptics but, even though the tapping function was enabled there, it didn't work. A weird fact is that vertical scrolling with two finger touch is working, but not tapping.
View 5 Replies
View Related
Aug 24, 2010
To all those who hit this after installing 11.3: Enable the tapping function of your touch pad by adding Option "TapButton1" "1" to /etc/X11/xorg.conf.d/20-synaptics.conf. then restart X (relogin). It will work with all WMs for which SuSE didn't bother to add a GUI config function/utility (xfce, WMaker, twm/fvwm, etc).
To SuSE: WHY? Why is this disabled by default? Why has a system/HW function to be enabled at WM level?? Why only KDE/Gnome?
View 2 Replies
View Related
May 1, 2010
I'm newish to the forum, but have been using ubuntu for the past few months.I recently upgraded from eeebuntu (a 9.04 derivative) to 10.04, and found that two finger tapping my touchpad has gone from middle click to right click, (and 3 fingers is now middle instead of right).
From what I've seen, this has been changed since 9.10, but I haven't been able to find a permanent solution yet. Most fixes have been from before and use hal, or other things that don't exist anymore. The one thing I've found does work is using xinput and the command
Code:
xinput set-prop "ETPS/2 Elantech Touchpad" "Synaptics Tap Action" 2, 3, 0, 0, 1, 2, 3
But that has to be run every time I start up, and it occasionally reverts while I'm using the computer. I've tried making a script that runs at startup, but neither adding it to the list of startup programs, or autostart folder has worked, but running the script file manually does work. I'm a bit at wits end with this, it's the only issue I've had with 10.04, and I've spent many many hours trying to get it to work (I've also tried gsynaptics and the newer version whose name escapes me right now). Hopefully there's a permanent fix out there.
View 6 Replies
View Related
Jun 4, 2010
Is it possible to setup tapping so that a fast tap with two fingers behaves like the right click button.
View 12 Replies
View Related
Oct 22, 2010
I have acer aspire one netbook with synatics ps2 touchpad. It works fine, but I'd like to emulate left button by just pressing somewhere in the touch area (same as it works in windows or ubunntu). I think this is called tapping. How can I configure that? I have been in touchpad settings and management, but I have not found any checkbox helpful. In OS 11.3 I need to press left button next to the touchpad.
View 2 Replies
View Related
Apr 22, 2010
I have installed synaptics touchpad drivers , but ubuntu cannot find the touchpad.
View 1 Replies
View Related
Feb 24, 2011
After the updating the synaptics driver in wheezy, I can no longer tap to click. This includes single-finger taps in the center and corners. Here is the relevant section from my xorg.conf
[Code]...
View 4 Replies
View Related
Aug 24, 2010
My Laptop is a Sony VAIO VPCS12C5E. I recently installed Fedora 13 (x64). I have the problem that the Touchpad is not working at all.The following Synaptics driver is installed:
xorg-x11-drv-synaptics-1.2.2-6.fc13.x86_64
Touchpad is not listed in GPointing (Version 1.5.1-2) A USB Mouse is working fine. I tried adding the following configuration to a new X11 conf file under /etc/X11/xorg.conf.d/01-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
MatchIsTouchpad "on"
Driver "synaptics"
EndSection
I got the configuration from [URL]
View 1 Replies
View Related
Jun 20, 2011
I have a HCL K21 pdc notebook. When I install Fedora 15 KDE then there is no tapping and scrolling of touchpad. But the cursor is moving. It does not work in Live CD as well as in installaton. I have updated F15 to full but still no luck. Touchpad : Synaptics The buttons below the touchpad are working and all the options in system settings are enabled
Note : I have read a forum in which touchpad is detected as ps/2 mouse. So I tried to disable the ps/2 mouse but it disable the cursor movement of touchpad, so it may be some kind of problem!
View 13 Replies
View Related
Mar 31, 2010
How do I enable touchpad tapping
View 4 Replies
View Related
May 14, 2010
Install Debian Squeeze onto Thinkpad T410. Got the basic things working and noticed that - movement of touchpad results in moving of mouse pointer, which is correct, but - tapping on the touchpad does not simulate a click action. Confirmed that the touchpad hardware is working by booting into a CrunchBang LiveCD. how I can enable the touchpad tapping action?
View 2 Replies
View Related
May 1, 2010
I have an EeePC 1000HA with Debian squeeze, and I can't seem to find the option to enable touchpad tapping. Is there a certain config file for the synaptics-touchpad driver I need to edit?
View 6 Replies
View Related
Mar 11, 2011
I'd like to ask a way to enable touchpad tapping permanently in gnome. I have installed gsynaptics, it starts up with gnome, but every time I log in, I need to go to Control Center->touchpad and enable tapping manually. In openSUSE 11.3 the default behavior was that if you enabled once, it remains so. Also it would be great that tapping to be enabled by default ( like in Ubuntu ), because not everybody knows how to enable it.
View 2 Replies
View Related
Oct 19, 2014
I've installed Debian Wheezy on my HP G62 notebook. In windows the touchpad worked well with all features. But now I can't turn the touchpad on/off by tapping on the LED, which doesn't shines. Also I can't use the double click feature.
View 1 Replies
View Related
Dec 2, 2010
just installed debian squeeze KDE after years of ubuntu and suse.. For some reason, after I finally got both scrolling and tapping to work, I have a weird weird touchpad through my xorg.conf: - tapping on a tab in chrome closes the tab.
- tapping in a text field pastes txt that is in the clipboard, each successive click keeps pasting the same thing
- the left side of the touchpad is not enabled for vertical scrolling (?), and for some reason the directions are inverted (move finger up to scroll webpage down)
- when having multiple windows open, tapping that window will highlight it, but the previously selected window stays overtop of the now selected windows. Using the actual left click button the windows change normally.
View 3 Replies
View Related
May 8, 2010
Okay here is a good one. I am running KDE and i am trying to use the instructions found here [URL] to enable the touchpad tapppping. I have done it this way before successfully but now i seem to be having a problem. When i started all i had was a 10-synaptics.fdi file that just had the word synaptics on it...then when i tried to modify it the only change that took place were the addition of 1 2 3 after it. I've tried over and over with different editors with the same result and no touchpad tapping.
View 1 Replies
View Related
Oct 26, 2010
I have a new HP ENVY 14 laptop with OpenSuSE 11.3 installed, running the Gnome desktop. The laptop has a Synaptics TouchPad. By default, many of the touchpad settings are turned off, e.g. single tap to click. I'm trying to set them in /etc/X11/xorg.conf.d/20-synaptics.conf code...
I've verified that the settings I'm trying to set work when I set them using synclient, e.g. synclient TapButton1=1 enables tap to click.
I'm brand new to Linux and OpenSuSE so I'm not even sure this is the preferred way to set up my touchpad. I'd appreciate any help diagnosing this problem.
View 5 Replies
View Related
Jul 15, 2011
Anyone got an idea how I can manually start the synaptics touchpad driver in ubuntu 10:4?
View 1 Replies
View Related
May 27, 2011
I have an HP 8460p laptop and have installed Debian(!) Squeeze. The Synaptics TouchPad works, but I am unable to adjust the configuration (primarily pointer speed/acceleration). I have installed package xserver-xorg-input-synaptics according to this Debian wiki page: [URl] My Synaptics device: tyler@titanium:~$ egrep -i 'synap|alps|etps' /proc/bus/input/devices N: Name="ImPS/2 Synaptics TouchPad"
Output from synclient and syndaemon: tyler@titanium:~$ synclient -l Couldn't find synaptics properties. No synaptics driver loaded? tyler@titanium:~$ syndaemon Unable to find a synaptics device. I have tried building /etc/X11/xorg.conf.d/synaptics.conf and restarting but nothing changed: Section "InputClass"
[Code]....
I also examined [URL] and I just couldn't get very far to understand what was wrong, or what I needed to do.
View 2 Replies
View Related
Sep 7, 2011
I'm trying to setup X on an old netbook to act kinda like a small backup server for a few VPS servers i own, Anyway so i decided to install X + openbox + Other Programs together to create a basic desktop that i could vnc into if i wish or could use from the main box.
(Heres the problem)
When X starts it says it cannot queary the touchpad and when X loads i have no mouse. The first few times i started X I had no problems. I've looked on a few websites but i cant seem to get the touchpad to work again, Any Ideas?
X Error:
Touchpad:
View 2 Replies
View Related
Feb 4, 2014
I had a question about how to configure wheezy 7.2 on a laptop with a Synaptics touchpad. As installed, the touchpad is recognized; I can move the mouse pointer with it, and even scroll vertically with the touchpad's scroll strip. However, it won't let me tap or double-tap on the pad to emulate mouse clicks, like I can in other OSes. I am running the LXDE desktop on Debian Wheezy 7.2.
And, there is no configuration that I can find for the Synaptics touchpad in the default setup; I looked all through the menus.
So far, I've tried a few suggestions I've found while searching. I installed a GUI-based config program called "GPointing Device Settings", and *some* of the settings in that program seem to work with the Synaptics touchpad, but others, like the tapping settings, don't.
One point of confusion for me is that some of the solutions I've seen mention a folder /etc/X11/xorg.conf.d/synaptics.conf; however, on my system, there is no xorg.conf.d folder underneath /etc/X11, and in fact, I can't find that folder anywhere on the system. The page I was looking at is here: [URL] .... does LXDE use a different X setup than other desktop environments?
View 4 Replies
View Related
May 26, 2015
I recently installed Debian with the Xfce desktop environment on my Toshiba Satellite laptop and my Synaptics touchpad simply does not work. In fact, it was not even working in the Debian graphical installation.
I verified that the touchpad is enabled by going to Applications --> Settings --> Mouse and Touchpad. I also verified that I had the requisite drivers by running Code: Select allsudo apt-get install xserver-xorg-input-synaptics. Finally, /var/log/Xorg.0.log did not reveal anything unusual, though the output is quite long and was difficult to navigate. Here is the output of Code:
Select allcat /var/log/Xorg.0.log | grep Synaptics:
Code: Select all[ 464.205] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 464.205] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 464.205] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 464.205] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 464.205] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 464.205] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 464.260] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 464.260] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5678 (res 46)
[ 464.260] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4732 (res 63)
[code]....
View 7 Replies
View Related
Feb 10, 2010
after finally being able to find the right configuration file for the Synaptics driver (I still think the change from HAL to udev was too silent...), I have gained the ability to configure my TouchPad. One Issue has been bothering me for a long time now: When moving the cursor from left to the right, at a certain position the mouse cursor jumps to the right edge of the screen.Here is the output of synclient while moving the finger constantly from left to right to illustrate the issue:
[code]....
Note that the value of RightEdge was changed by me in order to see if it has something to do with the issue. It has not, the cursor jumps at the same position, regardless of this value.
View 2 Replies
View Related
Jun 23, 2011
I'm running Debian Squeeze on an HP Pavilion dv6-6040ca. The touchpad featured is relatively new, which is likely the root of my problem. The touchpad with its winblows driver features a backlight, two mouse buttons (buttons,not dedicated touchpad space), and an 'on/off' switch/zone in the top left of the touchpad. The touchpad zone works well for pointing, but no gesture support. The touchpad's tap/click feature works way too well, which is very frustrating. The touchpad is detected as a mouse, so there is no option in System->Preferences->Mouse for a touchpad. Both mouse buttons function as expected. The 'on/off' switch/zone does not function, nor does the backlight.
The only feature I really need is the ability to turn off the tap/click feature, as it makes typing a nightmare. It's gotten to the point where I wrote a shell script to toggle the loading/unloading of my psmouse module (which isn't a bad solution, but I don't want my general account having access to modprobe).
Here are some details:
/proc/bus/input/devices
cat /proc/bus/input/devices
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
[code]....
I'm using the proprietary ATI driver (couldn't do 3D with the open driver), and I'm using a proprietary wireless module for my RaLink wireless adapter.
Passing parameters to the psmouse module
Unloading the psmouse module
Trusting HAL entirely (no xorg)
[code]....
also the xorg input synaptics driver is installed. Now here's the fun part where the obvious things I've overlooked are quickly pointed out to me.
View 9 Replies
View Related
Aug 25, 2010
I'm running F13 on an HP-dv6 with a Synaptics touchpad. I have not had any problems with the touchpad until the latest kernel upgrade to 2.6.33.8-149.fc13.x86_64. Now, intermittently with no obvious cause, yhe Synaptics driver fails to load at boot resulting in a dead touchpad. I've tried altering my xorg.conf with no results. The error message I get during boot when this happens is:
Code:
unable to query Synaptics hardware I've done some Googling as well as searching these forums and have found several suggestions, none of which seem to work. I already have /etc/X11/xorg.conf.d/10-synaptics.conf which reads:
Code:
##
Section "InputClass"
Identifier "touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "synaptics"
Option "TapButton1" "1"
EndSection
When it works it works great. Just seems to be no rhyme or reason for it. When it's not working and I try to run synclient I get an error that the synaptics module is not loaded. I'm wondering if anyone else has had this problem, or is it just me?
View 11 Replies
View Related
Jan 24, 2010
To cut to the chase, I have an ACER Aspire 8735G-6502, a fairly new model. I'm having issues configuring the multi-gesture to the touchpad to do any of the gestures. In fact when more than one finger is placed on the pad, the pointer flies around the screen in a random pattern. Does anyone have advice on either the configuration of the gestures, or a way of disabling any gestures and just having it be a single digit (classic) touchpad.
View 4 Replies
View Related
Feb 4, 2010
I am running Slackware 13.0 x86 64bit. Does anyone know where to find a Synaptics Touchpad driver for this system?
View 14 Replies
View Related
Feb 16, 2010
I suppose this thread has been created over a hundred times in the history of this forum, but yet it seems like I cannot find any solution to it. Nor has the Debian IRC-channel been able to channel the requiered information to me so I'm comming here as sort of a last resort.So my issue is that, as described in the topic, none of the settings I set in /etc/X11/xorg.conf have any effect on the touchpad. Other settings in xorg.conf such as color-depth for the screen and driver for the graphics card have effect but not the touchpad section. And if I make a syntax-error in the xorg.conf file X doesn't want to start, which is a clear indication that it's using that config file.
View 3 Replies
View Related
Jun 16, 2010
I'm having some trouble with my synaptic touchpad. Actually I think it is kind of working (I only use the trackpoint) but it gives me these nasty errors in Xorg log. I'm running Debian squeeze with 2.6.32-5-686 and Xorg 7.7
I've read some posts concerning touchpads (click) and the links within, but nothing seems to help or I'm doing something wrong. Hope you can bring some light to my darkness. Here some infos (I've renamed some files to .txt to ensure that they will be displayed in the browser): Xorg.0.log /etc/udev/rules.d/66-synaptics.rules xorg.conf /proc/bus/input/devicesCan someone tell me why the touchpad cannot be found by X? I already tried various configurations but nothing solved my problem so far.
View 9 Replies
View Related