I'm running Ubuntu 11.04 and I'm trying to install Webcamstudio through the Software Center but I get this "There isn't a software package called webcamstudio in your current software sources". How do I add this to my software sources?
View 2 RepliesI need to download the Kernel sources add a few lines and then recompile and install the new files. I found the following lines that are suppose to do it on nVidia's forums:
Code:
# Install Kernel Sources
sudo apt-get build-dep linux-image-2.6.24-17-rt
sudo apt-get source linux-image-2.6.24-17-rt[code]........
what the Kernel Module Source packages are called?... This guide I am trying to follow is obviously dated but it is the only solid lead I have been able to find towards making my ram work...This is the original thread on the NVNEWs boards: Unable to install Nvidia driver on 9500M + Ubuntu - Page 2 - nV News Forums,Read through that thread I linked to the NVidia forums for a detailed run down of what is wrong.
The semi short version: There is some sort of issue with the NVidia driver on the G1Sn (and several other Asus Models) and the way the Linux Kernel address memory, the issue results in not being able to use more than 2 Gigs of ram with the Nivida drivers. There is a patch (again check the nvidia forum link) that people said they had applied to fix this issue. At this point I am seriously considering Vista again if I can't get this working I love Ubuntu but I hate having my hardware limited by my software...where to download the files I need to recompile in the Kernel with the patch I need for my ram to work?
I tried posting there but it seems like the thread is long dead.. how I can download the needed files and maybe how I add these lines to it?I also started a thread on the ubuntu forums here: [ubuntu] Downloading Current Kernel Sources.
host: CentOS 5.4
guest: FC12
Virtual Machine: Virtual Box 3.1.4
I can not for the work get Virtual Box's Additions to install in my FC12 guest. The error log (/var/log/vboxadd-install.log) shows: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop.
I have tried:
# KERN_DIR=/usr/src/kernels
# KERN_DIR=/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686
# KERN_DIR=/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686/kernel
[Code]...
I installed Ubuntu 10.10, now I've been trying to add some applications like docky and jdownloader but always I got this message error :
[code]...
how to solve these and how to find a way to install my applications.
When I try to use sudo, I get this error message.
Code:
sudo: /etc/sudoers is owned by uid 1000, should be 0
sudo: no valid sudoers sources found, quitting
When I try to add software sources (specifically those for Scratchbox, but I get the same error with everything), I get an error message: "http://http not found". Obviously that is not a valid APT line and I have no idea what it is doing in my software sources. How do I take it out?
View 2 Replies View RelatedI am quite new to centos as I am from a windows back ground and trying to change over. I am trying to install Asterisk on a dell quadcore server running centos. I need to install Dahdi for hardware support but when I try to install it I get the following error You do not appear to have the sources for the 2.6.18-164.6.1.el5 kernel installed I don't have a clue
View 2 Replies View RelatedI am currently trying to install Debian 8 "Jessie" AMD64 on a Dell Latitude E7240. I have two 256 GB SSD disks, on the first one I have installed Xubuntu 14.04 successfully. I want to install Debian 8 (XFCE) on the other one.I have tried using Debian-8.0.0-Live-amd64-xfce, Debian-8.0.0-amd64-DVD and Debian-8.0.0-amd64-netinst, all from a USB key (prepared with Unetbootin), but after successfully partitionning SSD disk, the installer raises the following issue:"no install-able kernel was found in the defined apt sources".
View 3 Replies View RelatedI was changing some file permissions with the chmod 777 command and i accidentally executed:
Code:
sudo chmod 777 /*/*/*/*
and now i can't get root access to anything. If I try executing a sudo command i get:
sudo: /etc/sudoers is mode 0777, should be 0440
sudo: no valid sudoers sources found, quitting
I am running Slackware x64 current. I just did a slackpkg update and slackpkg upgrade-all.
I am trying to compile the latest kernel and I am getting:
host:/usr/src/linux# make menuconfig
HOSTCC scripts/basic/fixdep
/usr/libexec/gcc/x86_64-slackware-linux/4.5.1/cc1: error while loading shared libraries: libelf.so.0: cannot open shared object file: No such file or directory
make[1]: *** [scripts/basic/fixdep] Error 1
make: *** [scripts_basic] Error 2
When I try whereis libelf.so.0 - nothing found? gcc and glibc was one of the packages updated.
I have tried ldconfig. No change there?
I'm using Slackware current. I've updated my current after about two months from the last update, and since there was a huge number of changes I'm having some problems. In particular, I've forgot (my fault!) to give a "slackpkg install-new" before rebooting, so now I'm getting stuck...
Installpkg now claims a "rev" command, but I cannot figure how to find it, since the Slackware package browser on the website is still broken (when will it be available?!?!). Now, each time I try to install or upgrade a new package, I get this error:
/sbin/upgradepkg: line 41: rev: command not found
/sbin/installpkg: line 59: rev: command not found
Where can I find the package containing "rev"?
I've got the following problem: I just noticed that there were just very few notifications about updating the system (usually there are damn many of them in a week) So I opened the update manager and clicked on "refresh list". The following result popped up: p,li{white-space:pre-wrap;}E: Error http://ppa.launchpad.net natty/main/Sources Sources 404 Not Found First I thought, it would be just some kind of server problem, but it didn't stop. The next thing was to research the thread and I even found something. However, the solution suggested didn't work at all. (Things, which might have caused this: I installed the default software center |I'm using Kubuntu, but in this case that fact doesn't matter| and used it. To sum up:
- not able to update the system referring to the launchpad main sources for 11.04
- following error: E: Error http://ppa.launchpad.net natty/main/Sources Sources 404 Not Found It would be great if this was a common issue and I've been simply too stupid to find a proper solution. So you could just post the link.
I'm using webcamstudio in firefox on a site called stickam and i set the camera to webcamstudio but it either shows nothing or a frozen gray picture i even tried starting it b4 i start firefox but nothing. my webcam is logitech C250. how to get this working? or give me steps on how to broadcast it on a flash based site?
View 9 Replies View Relatedlibgmp If you found slackpkg failed for this upgrade because of libgmp not found you will need to grab the gmp package and install manually. This way ought to work:
[Code]....
I am running Jolicloud on my netbook (which I believe is an Ubuntu derivative) and I am tried to enter the getdeb.net sources in so I can install apps from the website through APT but
1) When I entered the sources into sources.list and then the key into Terminal and then went to the site and tried to install an app it didn't work.
2) I deleted the line of code in the sources.list file and when I opened terminal and entered "sudo apt-get update" it showed the list of sources, but on the list were Getdeb.net sources.
My question is how do I delete sources that aren't in /etc/apt/sources.list ?
i'm actually running linux mint 9 x64, but i decided to come here because the linux mint forums are down.
pretty much, i got fed up with pulseaudio causing the sound in flash videos/animations to be delayed, and after looking for weeks and finding no solution, i decided to dump pulseaudio and go with esound.
everything's gone fine until i decided to try webcamstudio. as soon as i run webcam studio, all audio ceases to work. this means that any videos videos playing in firefox suddenly become silent, and all system sounds are muted. the only way to cure it is to close webcamstudio and then close firefox. then all the sounds come back.
just as a warning, i'd prefer not to reinstall pulseaudio! if my flash videos don't work properly, then i had might as well throw linux out the window.
I am probably, over looking a simple option or such, but I can't get WebcamStudio to show my desktop instead of this default preview. I have selected Desktop in source and in output is set to Show Splash Screen preview... But how do I get my desktop instead of the Splash screen preview, and I would like to use this for ustream or justin.tv. Rigth now, ustream sees the option for WebcamStudio, and see the preview, but I can't figure out how to change the preview to the input of my desktop.
This is kinda the Splash Screen Preview
Used these following setups:
url
url
For an (art)installation I want a camera (webcam) to stream it's data to another computer with icecast2 server installed (including theora) in the same space. Problem is I need something without a gui.
The webcam is /dev/video0, and I would like to stream the video with vloopback (is working already with 2 pipes) to /dev/video3. If I'm right then I should be able to stream /dev/video4 to icecast.
How can I make the webcam video go into pipe /dev/video3? From [URL] I understand I have to do:
Code:
resize /dev/video0 /dev/video3 320x240 320x240
But then I get:
Code:
Usage: resize [-u] [-c] [-s [rows cols]]
[Code]....
When trying to compile the webcamstudio modulae (ws4gl.org) it doesn't give an error, but when I want to modprobe it....
Code:
This is from dmesg:
Code:
I have extracted the WebCamStudio java application into a folder in my Fedora 13 x86_64 installation. I can run WebCamStudio with the command java -jar "WebcamStudio.jar".
I can successfully select sources and view preview etc. However, the bottom status line permanently states "no output". There is no vloopback device to select in Cheese, camstream, Skype, AMsn etc. Does anyone know how I can get the loopback device to work?
I have added my username to the group "video"
I only have /dev/video0 - should there be another module for the loopback device?
Linux 2.6.33.6-147.fc13.x86_64
WebcamStudio 0.55a
I need to download this [url] and i cant figure out how to install it.
View 2 Replies View RelatedI've just installed clean copies of both VirtualBox v4.0.8 and Fedora 15. Now I have followed the instructions here : [url] to install the latest VBox guest additions.
Each time I try I get the following message:
The headers for the current running kernel were not found. If the following module compilation fails then this could be the reason. The missing package can be installed with
yum install kernel-devel-2.6.38.8-32.fc15.i686.PAE.
However, if I run that command I am told there is no such package available. The guest addition installer continues seemingly OK, but after a restart they are not loaded.
I've just moved to Fedora from Ubuntu due to major issues with its new version.
I am using Ubuntu 10.04 and would like to use WebCamStudio with Skype 2.1 beta for ubuntu 32 bit. I though skype displays WebCamStudio as one of the webcams its not able to stream output of WebCamStudio to other person...
View 2 Replies View RelatedI am installing a hp officejet pro 8500 all in one printer to knoppix 6.0.1. install hangs saying i need to disable cd sources in etc/apt/source.list. How do i do this?
View 1 Replies View Relatederror found with your "Postfix virtual maps": No "map sources" were found in the Postfix configuration. your system is not ready for use by Virtualmin. how do I set this?
View 2 Replies View RelatedFirst time I've done this in awhile Upgrading my Slackware64 -current VM, following the standard routine that has always worked in the past -
Code:
slackpkg clean-system
slackpkg install-new
The clean-system removed 2 packages -
util-linux-ng
eggdbus
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
I was building some packages with my -current machine and noticed that one of the c compilers was erroring out. Then I saw this ...
Code:
root@hydra5:~# ldd /usr/libexec/gcc/x86_64-slackware-linux/4.5.2/cc1
linux-vdso.so.1 => (0x00007fffa2bff000)
libmpc.so.2 => /usr/lib64/libmpc.so.2 (0x00007fb3d611d000)
[Code]....
I have been trying to get this web cam working for a long time. lsusb:
Code:
Bus 004 Device 003: ID 06a2:0003 Topro Technology, Inc.
dmesg
Code:
[ 1990.570050] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 1990.751460] usb 4-1: configuration #1 chosen from 1 choice
Kernel patch: [URL]
Driver project: [URL]
Cheese simply says no camera found. Skryba says no devices found. Since this kernel patch was 2009-04-07 which is nearly a year ago it should be in latest kernel?
[Code]...
During install of 9.10 server, both ethernet adapters were found. One is built-in to the motherboard, the second is on a PCIe slot. Selected the on-board adapter for eth0 during install, set fixed IP on the web, connected, updated, etc. w/ no problems. The second adapter is for the LAN.BUT, on first and subsequent reboots after installation complete the second adapter is not detected at all, as if it were not even plugged into the PCI or the driver not loaded. This happens on either of two slots, with two different adapters, Intel or Netgear, both pretty recent, and both of which are detected and work in a different box. 'Ethtool eth1' says device not found.This is a fairly recent motherboard 3N78EM).Since the adapter was found during installation I'm assuming that the problem is not with not the board. I've built several server systems with two or three ethernet adapters and have never run into this situation.
View 3 Replies View RelatedI installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!