Ubuntu Multimedia :: Installing Webcamstudio Module Fails
Jan 6, 2011When trying to compile the webcamstudio modulae (ws4gl.org) it doesn't give an error, but when I want to modprobe it....
Code:
This is from dmesg:
Code:
ADVERTISEMENT
Ubuntu Multimedia :: Webcamstudio Not Working
Dec 7, 2010I'm using webcamstudio in firefox on a site called stickam and i set the camera to webcamstudio but it either shows nothing or a frozen gray picture i even tried starting it b4 i start firefox but nothing. my webcam is logitech C250. how to get this working? or give me steps on how to broadcast it on a flash based site?
View 9 Replies View RelatedUbuntu Multimedia :: Webcamstudio Destroys All Audio
Jun 30, 2010i'm actually running linux mint 9 x64, but i decided to come here because the linux mint forums are down.
pretty much, i got fed up with pulseaudio causing the sound in flash videos/animations to be delayed, and after looking for weeks and finding no solution, i decided to dump pulseaudio and go with esound.
everything's gone fine until i decided to try webcamstudio. as soon as i run webcam studio, all audio ceases to work. this means that any videos videos playing in firefox suddenly become silent, and all system sounds are muted. the only way to cure it is to close webcamstudio and then close firefox. then all the sounds come back.
just as a warning, i'd prefer not to reinstall pulseaudio! if my flash videos don't work properly, then i had might as well throw linux out the window.
Ubuntu Multimedia :: WebcamStudio Not Working/Preview?
Apr 11, 2011I am probably, over looking a simple option or such, but I can't get WebcamStudio to show my desktop instead of this default preview. I have selected Desktop in source and in output is set to Show Splash Screen preview... But how do I get my desktop instead of the Splash screen preview, and I would like to use this for ustream or justin.tv. Rigth now, ustream sees the option for WebcamStudio, and see the preview, but I can't figure out how to change the preview to the input of my desktop.
This is kinda the Splash Screen Preview
Used these following setups:
url
url
Ubuntu Multimedia :: Broadcast Webcam Live Without WebcamStudio
Feb 28, 2010For an (art)installation I want a camera (webcam) to stream it's data to another computer with icecast2 server installed (including theora) in the same space. Problem is I need something without a gui.
The webcam is /dev/video0, and I would like to stream the video with vloopback (is working already with 2 pipes) to /dev/video3. If I'm right then I should be able to stream /dev/video4 to icecast.
How can I make the webcam video go into pipe /dev/video3? From [URL] I understand I have to do:
Code:
resize /dev/video0 /dev/video3 320x240 320x240
But then I get:
Code:
Usage: resize [-u] [-c] [-s [rows cols]]
[Code]....
Ubuntu Multimedia :: WebCamStudio With Skype - Unable To Stream Output To Other Person
Jun 3, 2010I am using Ubuntu 10.04 and would like to use WebCamStudio with Skype 2.1 beta for ubuntu 32 bit. I though skype displays WebCamStudio as one of the webcams its not able to stream output of WebCamStudio to other person...
View 2 Replies View RelatedUbuntu Multimedia :: After Installing Nvidia Card Ffmpeg Desktop Capture Fails To Work?
Nov 10, 2010i installed an nvidia graphics card recently and this
Code:
ffmpeg -f alsa -ac 2 -i pulse -f x11grab -r 30 -s 1024x768 -i :0.0 -acodec pcm_s16le -vcodec libx264 -vpre lossless_ultrafast -threads 0 ./Desktop/mydesktop.mkv
[code]....
General :: Openssl Add-on Module Fails?
Aug 10, 2011I am a new administrator and am running SLES 11 on a VM. I have openssl installed, but when I attempt to compile an add-on module to Nginx I get the following list of errors:
[Code]...
Ubuntu Installation :: X Pircture Fails After Nvidia-module Is Enable?
Mar 16, 2010i've got really wierd problem with kernel 2.6.31-20. After kernel update nvidia-module crashes "picture" on gnome & kde, it gives random colors / pixels to the screen. U can use it, so it's somehow working. Without nvidia module everything work perfectly. I've tried 5 different drivers but no solution. Also reconfigured X (dpkg-reconfigure xserver-xorg).This problem is also with older kernels. Problem came after i rebooted to 2.6.31-20 kernel.
View 1 Replies View RelatedProgramming :: Perl Module Installation Fails
Jan 12, 2011Using perl -MCPAN -e shell then install Mail::Message then yes to everything (except the test that needed an IMAP server) resulted in.
View 3 Replies View RelatedSlackware :: VirtualBox < 3.1.4 Module Build Fails On 2.6.33 Kernel
Mar 4, 2010I had an issue with the module build for vbox 3.1.2 breaking on the latest kernel ( /etc/rc.d/rc.vboxdrv setup ). Apparently the issue is that a kernel header (autoconf.h ) has changed its location in the module tree and hence the issue.
2 options:
1. upgrade to 3.1.4
2. create a symlink as follows
cd /usr/src/linux/include/linux
ln -s ../generated/autoconf.h autoconf.h
Slackware :: X Fails To Start After Upgrade - Invalid Module
Mar 6, 2010So I made the upgrade to slackware64-current and all of a sudden after my next reboot, startx failed, and x refused to start the output was the following:
Code:
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.1 Slackware Linux Project
Current Operating System: Linux hd830 2.6.33 #3 SMP Sat Feb 27 19:42:32 CST 2010 x86_64
Kernel command line: BOOT_IMAGE=Linux ro root=803 vt.default_utf8=0
Build Date: 23 February 2010 12:09:32PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 6 19:21:18 2010
(==) Using default built-in configuration (30 lines)
(EE) Failed to load module "fbdev" (module does not exist, 0)
WARNING: Error inserting button (/lib/modules/2.6.33/kernel/drivers/acpi/button.ko): Invalid module format
WARNING: Error inserting i2c_algo_bit (/lib/modules/2.6.33/kernel/drivers/i2c/algos/i2c-algo-bit.ko): Invalid module format
WARNING: Error inserting agpgart (/lib/modules/2.6.33/kernel/drivers/char/agp/agpgart.ko): Invalid module format
WARNING: Error inserting drm (/lib/modules/2.6.33/kernel/drivers/gpu/drm/drm.ko): Invalid module format
WARNING: Error inserting drm_kms_helper (/lib/modules/2.6.33/kernel/drivers/gpu/drm/drm_kms_helper.ko): Invalid module format
FATAL: Error inserting i915 (/lib/modules/2.6.33/kernel/drivers/gpu/drm/i915/i915.ko): Invalid module format
(EE) intel(0): No kernel modesetting driver detected.
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support. Please also check the log file at "/var/log/Xorg.0.log" for additional information. So then after some googling I got the suggestion to downgrade udev-151 to udev-141, but that yeilded no results. So I did some more googling and a bunch of people who had the same problem said that downgrading module-init-tools worked, so I downgraded from module-init-tools 3.11 something to 3.6 and now, not only does my X no longer work, but no modules are being loaded I believe, for example I saw in my startup that fuse was not being loaded, ndiswrapper which I had installed was not loaded.
CentOS 5 :: Yum Fails With 'module' Object Has No Attribute 'main'
May 5, 2009Any attempt to run yum produces the following error:
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.main(sys.argv[1:])
AttributeError: 'module' object has no attribute 'main'
It doesn't matter what command line arguments I use I get the same.I've spent a day or so searching on Google but not had any luck in identifying what is causing this problem.
Fedora :: Vmware 1.0.10 On Core 12 - Fails On Building The Vmmon Module
Jan 25, 2010I have tried installing Vmware-Server 1.0.10 on Fedora Core 12. After installing all packages it fails on building the vmmon module. In the internet i found many patches and vmware-any-any-updates...but nothing worked. My Kernel Vresion is 2.6.31.12-174.2.3.fc12.i686.PAE...
View 2 Replies View RelatedServer :: Php-mysql Dynamic Module Fails On RHEL 5.5 - Undefined Symbol: Executor_globals
Nov 17, 2010I've recently installed a RedHat Enterprise Linux server and am attempting to get PHP/MySQL installed on it. It cannot load the dynamic php mysql module, giving me an error (in /var/log/error_log) that reads as follows:
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mysql.so' - /usr/lib/php/modules/mysql.so: undefined symbol: executor_globals in Unknown on line 0
(In fact, it fails to load ALL of the dynamic php modules, either with the "undefined symbol: executor_global" or "undefined symbol: core_globals" I DO NOT WANT to compile anything -- I want to stay with stock RedHat released software.
[root@hostname-suppressed httpd]# uname -a
Linux hostname-suppressed 2.6.18-194.17.4.el5PAE #1 SMP Wed Oct 20 13:13:33 EDT 2010 i686 athlon i386 GNU/Linux
[root@hostname-suppressed httpd]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.5 (Tikanga)
[code]....
Ubuntu :: 11.04 - Webcamstudio Not Found In Current Software Sources
May 6, 2011I'm running Ubuntu 11.04 and I'm trying to install Webcamstudio through the Software Center but I get this "There isn't a software package called webcamstudio in your current software sources". How do I add this to my software sources?
View 2 Replies View RelatedUbuntu :: Installing The Dansguardian Webmin Module?
May 13, 2010I have installed squid and Dansguardian on Ubuntu Server 10.04. I have also installed webmin. I see that there is a Dansguardian module for Webmin, and I have downloaded it to the server, but I am not sure how to install it. The file was downloaded from [URL]I don't know what to do with the .wbm file.
View 1 Replies View RelatedFedora :: WebCamStudio- No Loopback Device
Jul 21, 2010I have extracted the WebCamStudio java application into a folder in my Fedora 13 x86_64 installation. I can run WebCamStudio with the command java -jar "WebcamStudio.jar".
I can successfully select sources and view preview etc. However, the bottom status line permanently states "no output". There is no vloopback device to select in Cheese, camstream, Skype, AMsn etc. Does anyone know how I can get the loopback device to work?
I have added my username to the group "video"
I only have /dev/video0 - should there be another module for the loopback device?
Linux 2.6.33.6-147.fc13.x86_64
WebcamStudio 0.55a
General :: Install WebCamStudio On Ubunto 10.04?
Aug 5, 2010I need to download this [url] and i cant figure out how to install it.
View 2 Replies View RelatedUbuntu :: Installing - FATAL: Module Powernow_k7 Not Found
May 15, 2010I want to activate cpu frequency scaling on my home computer. I have an athlon 64 3200+. I know that it supports frequency scaling, because when I got the processor I also got a CD with the Cool n'Quiet driver. I've tried with the powernowd service, but when I try to start it I get Code: * Starting powernowd... * CPU frequency scaling not supported...
and if I try to start cpufreqd I get Code: No cpufreq interface found, not starting cpufreqd In the meanwhile I've noticed that I also don't have powernow-k7 kernel module installed. If I try a modprobe powernow-k7 I get: Code: FATAL: Module powernow_k7 not found I have no ideea where I can get this kernel module.
Programming :: Installing New Module On Ubuntu 9.4 Which Running On Vmplayer
May 8, 2010i am using vmplayer 3.0 for linux. and i want to insert module on ubuntu 9.4 which is running on vmplayer. how can i insert new module on vmplayer.
View 1 Replies View RelatedCentOS 5 :: Installing PHP Module For Apache?
Jul 21, 2009I have installed CENTOS 5.3 on my machine and am running the new version of Subversion which comes bundled with Apache. I noticed in the httpd.conf file there is no module for PHP which is a problem. How do I install the PHP module for APACHE in Centos 5.3?
View 3 Replies View RelatedRed Hat :: Installing Perl (v5.8.8) Module For Connecting To MySQL
Aug 2, 2010I want to connect to MySQL Database installed on RHEL 5 using perl v 5.8.8.The available DBD perl drivers installed on my machine are:DBM, ExampleP, File, Pg, Proxy, Sponge..I downloaded DBD-mysql-2.1012 and tried installing DBD again but got the following error:Can't exec "mysql_config": No such file or directory at Makefile.PL line 167.readline() on closed filehandle PIPE at Makefile.PL line 169.On searching I found that I need to install libz-devel prior to installing driver for MySQL for Perl.
View 1 Replies View RelatedSoftware :: Attempting To Installing Perl Module Gimp::Fu?
Oct 29, 2010I'm attempting to set up a GIMP scripts for batch operations on groups of image files. Initially I started reading about the Script-Fu syntax but it looked too convoluted (at least for me, with 15 years of Perl experience at work) in a way it does the simpliest of things so I attempted to use Perl instead of Script-Fu. From reading the docs I see that I need to install "Gimp::Fu" Perl module. I installed "cpan" first, started it and issued the command:
install "Gimp::Fu"
and got a dependency problem:
Code:
cpan[1]> install "Gimp::Fu"
CPAN: Storable loaded ok (v2.18)
Going to read /root/.cpan/Metadata
Database was generated on Thu, 28 Oct 2010 17:30:45 GMT
[code]....
Networking :: Bcmwl (5.10.91.9 + Bdcom) Installing Module (bad Error Status:10)
May 23, 2010I m trying to get the b43-fwcutter working with a b4312:14e4315 chipset, it works on 10.04 intill i have to re-boot (?) then it just has no wireless at all, i�ve tried upgrading the kernel to 2.6.32 using ubuntu 9.10 but i get the error status 10 build failed. I am pretty new to linux (and to great with computers full stop), i�ve tried following tutorials i have found but each time i end up with no wireless or a installed driver that doesn't detect any app...
I have managed to get the STA driver working in the new kernel, but when i install b43-fwcutter and remove the bcmw-kerenel-source and re-boot i have no driver at all (?), i am really out my depth here but would like to get it working without it crashing like i get with 10.04
CentOS 5 :: Installing VirtualBox - Compilation Of Kernel Module Failed
Oct 13, 2009I'm trying to get Virtualbox up an running. So I have added virtualbox in my repo and added the key, looks fine so far. but afeter downloading I get this:
VirtualBox-3.0.8_53138_rhel5-1.x86_64
Creating group 'vboxusers'. VM users must be member of that group!
No precompiled module for this kernel found -- trying to build one. Messages
emitted during module compilation will be logged to /var/log/vbox-install.log.
Compilation of the kernel module FAILED! VirtualBox will not start until this problem is fixed. Please consult /var/log/vbox-install.log to find out why the kernel module does not compile. Most probably the kernel sources are not found. Install them and execute /etc/init.d/vboxdrv setup as root.
Ubuntu :: Fails To Boot After Installing?
Aug 30, 2010I installed Ubuntu netbook version on my HP netbook Mini 110 with Windows 7. After installing Ubuntu the first boot up failed. It hangs with a black screen with a flashing text-mode cursor. After several attempts (just rebooting) it worked. However, about 95% of the time the machine fails to boot - after 3-4 seconds, and without showing anything on the screen (text or graphical), it hangs with a black screen with a flashing text-mode cursor. Pressing Ctrl-Alt-F7 (or any other keys) has no effect.
I also tried booting in recovery mode from the Grub menu I get at start-up. It failed too. The last few lines I get in recovery mode looks like : ata1: SATA max UDMA/133 abar m1024@0xfe(some numbers)
ata2: DUMMY
ata3: SATA max UDMA/133 abar m1024@0xfe(some numbers)
ata4: DUMMY
After this it get stuck there forever. Can someone help me out on this ? I'm a novice in this area.
Ubuntu Servers :: Installing Apache Fails ?
Jul 17, 2010I don't have much experience working with Ubuntu servers, but I recently decided to try to set one up. I have a remote server hosted with a static ip address, but I can't seem to install apache.
When I run the command
Code:
It fails to install with because it is missing dependencies.
"apt-get install -f" doesn't help. How can I install the necessary dependencies to get this working?
Ubuntu :: Installing The Latest ATi Driver - Fglrx - Fails On 9.10
May 22, 2010I got tired of not being able to run any 3D apps on my integrated Intel and went out and came home with a ATi Radeon HD 4650. Skip the bit about how I could have gotten an nVidia (they didn't have any HTPC compatible low-profile nVidias on shelf).
Actually the card works very well, it runs all the 3D apps I've thrown at it so far (and quite a bit faster too).
My problem is with video playback: it is jerky. The framerate stalls and then speeds up and is out of sync. When not out of sync, there is tearing. Yes I have tried turning Compiz off, didn't do anything. Weird thing is the CPU utilization is really low, so everything should be working.
I figured I would update the video drivers to the latest available on ATi website (following the instructions here) but I've ran into trouble with the installer:
Code:
How do I proceed from here? If you've got a fix for the video with the drivers in the repositories that is cool also. I don't necessarily need the latest drivers.
General :: Installing Dropbox-api On SUSE Fails?
Jul 7, 2011I am trying to install the dropbox-api onto my suse 11.4 but i keep getting this error:
Can't locate DateTime.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.12.3/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.12.3 /usr/lib/perl5/vendor_perl/5.12.3/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.12.3 /usr/lib/perl5/5.12.3/i586-linux-
[code]....