Ubuntu Multimedia :: 06a2:0003 Topro Technology - No Camera Found - Skryba Says No Devices Found
Mar 29, 2010
I have been trying to get this web cam working for a long time. lsusb:
Code:
Bus 004 Device 003: ID 06a2:0003 Topro Technology, Inc.
dmesg
Code:
[ 1990.570050] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 1990.751460] usb 4-1: configuration #1 chosen from 1 choice
Kernel patch: [URL]
Driver project: [URL]
Cheese simply says no camera found. Skryba says no devices found. Since this kernel patch was 2009-04-07 which is nearly a year ago it should be in latest kernel?
[Code]...
View 3 Replies
ADVERTISEMENT
Mar 9, 2011
having a problem getting my web camera recognised at start up. when i boot my machine and run , cheese or skype no camera , if i unplug it and plug it back in it works fine . Till i shut down and boot up again .
View 1 Replies
View Related
Feb 25, 2010
Up until about a week ago using Kubuntu 9.10, the sound on this computer was fine, but now every day when I turn the computer on I have no sound and I get a notification from Phonon saying:
The audio playback device NVidia (ALC883) does not work.
Falling back to.
If I turn the computer off and then back on, sound is working again. code...
View 1 Replies
View Related
Sep 2, 2010
I'm brand new to debian and quite new to unix based systems in general.
I just switched to debian from ubuntu in search of something different and I want to find a system that works for me before I settle down.
I DO NOT HAVE A SECONDARY OS
just two problems I have with debian:
No sound
Error message: No volume control GStreamer plugins and/or devices found.
When I try to open sound from the speaker icon at top right.
I think it's a driver issue but Its not as easy as ubuntu was lspci:
My trackpad also does not work so I have to open documents manually if I don't bring my mouse to class.
View 3 Replies
View Related
Sep 28, 2010
I followed this tutorial: [URL]... I followed it on my ubuntu system to get my 2 x M-AUDIO Delta 1010s working. My deltas are now detected. And apparently it's all ok. However when I try and open Ardour (which I installed from the repos), I get: Quote: [ERROR]: No devices found for driver "OSS". My graphics cards aren't attached to their break out boxes. Could this be why? For that same reason, I can't test to see if the audio is coming out. All I know is that Ardour can't find a device.
View 2 Replies
View Related
May 2, 2010
After upgrading from 9.10 to 10.40.. My Cheese webcam doesn't work anymore. It says: No Camera Found!
And also one important thing is missing.. (I don't know how to say that).. "ALWAYS ON TOP"
How do i get back that?
View 4 Replies
View Related
Mar 9, 2009
When I am trying Cheese to view the Webcam, I am getting a message "No Camera found".
But if I do a lsusb, then the following details are shown :
Bus 003 Device 003: ID 0c45:6130 Microdia PC Camera (SN9C120)
Is there any way to correct this problem. I am on Ubuntu Intrepid 8.10.
View 6 Replies
View Related
May 29, 2010
i've been having this problem since lucid, in both ubuntu and kubuntu, though im currently running kubuntu wich is why i tagged it that way.I open k3b, and it immediately tells me there's no optical device/drive...Then i "wodim --devices" and it returns
Code:
wodim: Overview of accessible drives (0 found) :
well that sucks, next stop "wodim --scanbus"
[code]...
View 9 Replies
View Related
Sep 3, 2015
I use gMTP for transferring files between tablet/ phone and my PC. Since like a week ago when I try to connect, I get "Detect: No raw devices found" error.
lsusb -v -d 2970:2008 returned
Code: Select allBus 003 Device 009: ID 2970:2008
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
[Code] .....
View 2 Replies
View Related
Aug 14, 2010
i'm quite new to Fedora, altough i'm now installing it on my second computer, a desktop pc,it is old (4 years or so), and has an ASUS M2N-SLI DELUXE URL... which worked fine under windows XP and had no problems.Now, after i've installed Fedora 13, i've found out that it isn't recognized, i'm unable to connect to internet, or to any other device, because under the network management window there are no network devices to select.
View 4 Replies
View Related
Jul 30, 2011
I have OPENsuse 11.4 64 bit. I installed 3.11.7 and performed hp-check -t and no problems were reported; yet I cannot seem to configure my HP printer. I work through hp-setup, following the instructions; it recognizes my network, recognizes the printer, says that it's managed to configure it, asks me to remove the usb connection and offers me the 'finish' button. When I click on the finish button it automatically pops up the the message 'no installed hp devices found' - the point where I started!
I am a member of groups sys and lp - hp-setup automatically configured this. Attached is the output from hp-check -t...
hp-check -t
HP Linux Imaging and Printing System (ver. 3.11.7)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with absolutely not working.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log .....
Initializing. Please wait .....
| SUMMARY |
No errors or warnings.
Done.
View 9 Replies
View Related
Nov 6, 2010
I`ve boot my laptop by centos. then my devices cant be found.
View 1 Replies
View Related
Nov 19, 2009
While installing Fedora 12, no devices were found on which to create file system (see attch.). I get the same message either on Live CD or DVD boot start. It looks like Fedora do not see my hdd. But Palimpsest can see my hard drive (see attch.)
Hdd is on my NForce 4 Ultra m/board and connected via "sata". Also I have raid controller on my board. But it is not in use: I turned it off in bios.
View 14 Replies
View Related
May 31, 2010
I have a Samsung NC10 and want to use my built in webcam on TokBox. However, when I try to use it, my camera and mic do not work. TokBox gives be a "Devices Disabled" message. It says set to "allow" and click ok, but there is nothing to click. I also can't get the camera to work with video chat in Gmail.
I know the the camera works because I can get it to work in Cheese. The mic, I can't get to work at all. I have gone to the Macromedia site and set the settings to "allow", but still no go.
Both work fine in XP (I have a dual boot), so it's not a hardware problem.
Info:
OS: EasyPeasy 1.6 (same as latest Ubuntu Netbook Edition)
Adobe Flash Player: 10.0.45.2
Browser: Firefox & Chromium (didn't work in either)
View 1 Replies
View Related
Feb 10, 2011
It's been years since I've set up a Linux machine and I am getting a "no valid devices were found on which to create new filesystems" during a Centos install on a Asus P5BV-C/4L motherboard. I am assuming that there is a raid driver that needs to be installed, but when I went to the asus download site, selected linux/P5BV-C/4L and downloaded all of the available drivers, I keep getting errors saying "Driver disk is invalid for this release of Centos".
I take the zip file, extract it down to the .img file, burn it to disk and try to load it after running a "linux dd". Is this the correct way of doing it? Am I using the correct file?
View 1 Replies
View Related
Jul 12, 2010
when i want to install centos 5.5 i take this error:
An error occurred - no valid devices werefound on which to crate new file systems.
my hardware specification is:
motherboard: gigabyte p55a-ud3
ram: ddr3 crucial 4gb
cpu: corei5 750
hdd: 2X1TB wd black edition raid1
View 8 Replies
View Related
Feb 3, 2010
Why is it that FC6 installs just fine from a USB CDROM in an external enclosure but FC12 boots from the CD asks to install or upgrade an existing system but then stops at no devices found and wants the install path for the install image? It appears to see the CDROM, boots then looses its mind and forgets a CDROM was attached.
View 13 Replies
View Related
Jun 20, 2010
Recently I bought a Toshiba NB100 from a family friend. All was going well until I installed some updates and now when I try to unmute my speakers I get this error message pop up.....
"No volume control GStreamer plugins and/or devices found"
View 2 Replies
View Related
Apr 15, 2011
I installed debian 4.0 (etch) on an old computer with some pickled graphics card in it, and then I upgraded the computer to one with slightly newer hardware only without the graphics card (the new one used on board graphics). I moved the hard drive from the old one to the new one but when I booted it up it failed to start the X-server and I got some errors listed for "device not found" and "no screens found".
I tried using "dpkg-reconfigure xserver-xorg" however I can't seem to find a working configuration. It seems pretty silly that when installing debian it can detect all this automatically with no problems but when it comes to changing some hardware around you are left in the dark with a complicated re-configuration process. Is there not some way to automate this? I'd rather not have to re-install everything
View 8 Replies
View Related
Jan 24, 2010
During install of 9.10 server, both ethernet adapters were found. One is built-in to the motherboard, the second is on a PCIe slot. Selected the on-board adapter for eth0 during install, set fixed IP on the web, connected, updated, etc. w/ no problems. The second adapter is for the LAN.BUT, on first and subsequent reboots after installation complete the second adapter is not detected at all, as if it were not even plugged into the PCI or the driver not loaded. This happens on either of two slots, with two different adapters, Intel or Netgear, both pretty recent, and both of which are detected and work in a different box. 'Ethtool eth1' says device not found.This is a fairly recent motherboard 3N78EM).Since the adapter was found during installation I'm assuming that the problem is not with not the board. I've built several server systems with two or three ethernet adapters and have never run into this situation.
View 3 Replies
View Related
Oct 1, 2010
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
View 9 Replies
View Related
Jul 2, 2011
Adding a kernel parameter to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nodmraid" (not 100% it should go there grub2 is new to me, but that is another story) I noticed the following error when running update-grub.
ERROR: ddf1: wrong # of devices in RAID set "ddf1_Series1" [1/2] on /dev/sdb No volume groups found
Now I have not a clue where it is getting ddf1_Series1 from.sdf1 is part of a RAID1 group that has mdadm RAID1 > luks > LVM
md6 : active raid1 sdi1[1] sdf1[0]
1465135936 blocks [2/2] [UU]
bitmap: 0/175 pages [0KB], 4096KB chunk
Errors bug me.. as I am new to grub2 was wondering if anyone has an insight into the error / where to investigate Still reading the grub2 / grub manuals.
View 3 Replies
View Related
Feb 13, 2009
I have created a folder including some html link pages in /test/htlink . Now I want to create a soft link of that folder as htlink -> /test/htlink in /var/www/html . Now when I m browsing the folder , its erroring (404 Not Found) folder is not found on the server . I have given 777 permission on every file-folder in /test . No firewall & no SELINUX .
*** I want to browse the folder ***
View 3 Replies
View Related
Oct 28, 2010
I have a Dell Vostro 3300, i5 460 processor with a NVIDIA 310M Graphics Card. I'm doing a KUBUNTU 10.10 (Maverick) install with the following results. The Live CD boots just fine to, "TEST," or "Install." Installation goes fine. However, the graphics card being used is the Intel i915. I have tried installing the NVIDIA drivers directly from the, "Additional Drivers," tool and after the reboot I get through the boot screen to the console. I try to manually startx and I get the errors, "no device found," "no screens found." The second install I tried purging and blacklisting the nouveau drivers and entering safe mode. Then using apt-get install nvidia-current. After that, nvidia-xconfig. Same results.
The third attempt I re-installed and this time downloaded the drivers from the Nvidia site (version 256.53). Blacklisted nouveau, remove all nvidia, updated initramfs, etc. The install went fine however I still end up at a console after boot with the same messages as above. No device found, no screens found. I've tried searching through the forum and web and have tried things like adding the modset option along with many other hacks, tips and fixes. still, no go.I can live with the Intel graphics for now although I lose 512MB of memory. Unfortunately there is no way to disable or change this set-up in the BIOS. I've seen quite a few bug reports at Launchpad:
1. Is this something I should just wait til a fix comes? Will a fix come?
2. Is there, or will there be an official Updated Ubuntu Guide for Maverick to install NVIDIA drivers with this tecnology?
3. Lastly, is there anything else I should try??
View 9 Replies
View Related
Nov 19, 2010
I'm trying to install the projectM visualizer and I'm running into some problems. Initially, I tried to install it by running "sudo apt-get install libvisual-projectm", which seemed to work... except there's no launcher for it in my Applications menu and "projectM-pulseaudio" returns "command not found". From there, I decided to try to build it myself, by following this guide (<- link). It went well until the "make" command, which returns the following error:
[Code]....
View 1 Replies
View Related
Jan 5, 2011
Basically my portable computer's speakers have "Dolby Home Theater - Virtual Surround Sound" written on them. Now I figure there has to be some software (in Windows) that controls the whole thing. Is there something similar that in Ubuntu?
View 4 Replies
View Related
Apr 11, 2011
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI [URL]
- Video resolution seems to change during video playback [URL]
- Channels cannot be found via DVB-S
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
when I try to scan for any available satellite channels to use in Myth, I cannot find any channels. I have invoked "scan -V -l UNIVERSAL -s 1 -a 0 /usr/share/dvb/dvb-s/Astra-19.2E" with the following result:
Code:
scanning /usr/share/dvb/dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12551500 V 22000000 5
>>> tune to: 12551:v:1:22000
[Code].....
View 2 Replies
View Related
Apr 8, 2009
Dual PII 400, 512Mb with a Promise SuperTrak 100 IDE Array Controller. At present I have only one drive on the controller, configured for 1 JBOD array. I install FC9 with no problem. New partition is created and formatted, Grub is installed, and then... Grub is found and booted, but then I get:
Reading all physical volumes. This may take a while... No volume groups found Volume group "VolGroup00" not found Unable to access resume device (/dev/VolGroup00/LogVol01) mount: could not find filesystem '/dev/root' I can boot in rescue mode, chroot to the installed system. I changed the kernel boot parm "root=/dev/VolGroup00/LogVol00"
View 2 Replies
View Related
Jan 31, 2011
tried to install linuxant drivers which failed and then I uninstalled it. Now sound does not work, installed alsa backports again, installed alsa, alsautils again as well. no luck.
aplay -l
aplay: device_list:235: no soundcards found...
This is on maverick.
View 3 Replies
View Related
May 31, 2011
I have ubuntu 11.04 few things first: I cant figure out how to get to the x.org configuration, i've searched high and low for it. I looked in the software center and it says i have OpenGL installed, but when i search for OPENGL or x.org in my applications menu, it only gives me available downloads, and nothing to actually open in a window and use. -When I open the additional drivers menu its 100% blank. not 1 driver is listed. -I searched for and downloaded the proprietary ATI driver from the software center, additional drivers menu is still blank, and I can't run Unity now. -I tried to open the ATI Catalyst control panel, and it says the driver is not properly configured, and to run the aticonfig, where is this? i cant find it. None of this is making any sense to me. I've been reading forum posts and numerous 3rd party sites for days, and nothing works.
I'm just trying to get my laptop to run EVE. It ran fine when I had windows on here. All of my problems with it seem to be stemming from my Graphics, and I cant seem to figure out how to fix it. It seems that every fix I can find, doesnt work on my laptop, and many of the control panels people point to as a resource to fix a problem, I either can't find them, or they are not populated the way they should be. I hate to say it, but if I can't get this issue resolved, I may have to turn back to Windows, The main reason I even have this laptop is to play games when I'm not at home...and I cant do that....all i can use it for ATM is music and internet...
View 3 Replies
View Related
