When I try to install Ubuntu, it freezes at the screen where it asks you to make sure if your PC has 4.4GB of free storage, etc. I tried installing from a CD, a USB stick... same results. What can be the cause of the problem ?
View 1 RepliesI have lately been doing some planning to make a small embedded device (using uClinux) and got to the point of researching storage. I was contemplating using a removable card for the whole storage, but I can't seem to find too much information about the free-ness of various portable storage (there's a brief bit about SD cards on the wiki page, but it's not abundantly clear to me). Can anyone speak to the openness of CF, SD, SDHC, etc.? Are there any OTHER cards out there that are more open, and preferable to use? Aside from being supported, I'm hoping to use something that isn't "on its way out" (so I can get replacements if I have to), but I still would love to stick to my ideology and pick something that is made with more of a free attitude.
View 4 Replies View RelatedI'm totally new to this linux thing and I have a very strange problem. I downloaded the .iso and burned it to CD as per instructions. I had intended to install alongside existing WinXP Pro Sp3. Everything seemed to be going fine until it the installer got to the "User Info" Screen where it asks for my name, the computer's name, password, etc. At that point nothing I did would allow the "forward" button to work. I backed up a step or two and went forward again to no avail. I ended up hitting the hard reset button to get out of it. I never saw any error messages even though I scrolled through the install log at the bottom of the install window. Now my HDD is 60 Gb smaller (The part intended for Ubuntu) under Win XP and I have no idea what to do about it.
My system:
Asus P5NE-SLI Mobo
Intel Core2 Duo 8400 3.0 Ghz
2 Gb ram at 800Mhz
Nvidia 9800GT GPU 512Mb
Win XP seems to be working normally except for the loss of HDD space.
When my pc is connected directly to the LAN modem, my server can go online, ip connects to the domain and everything is cool.
When my pc connected to the router which is connected to the modem, I can't make my server go online. It asks for some linksys authorisation.
How can I teach my server to ignore my router and go directly to the modem. Unfortunately I can't just connect my server to the modem couse 3 more PCs are connected with the hub.
I'm trying to make a script that loads at boot and asks for user input before doing it's stuff. So I created a script in /etc/init.d/ following the example given there (skeleton file) and used update-rc.d to make it load before GDM.
But when my script requests user input, init doesn't stop, and goes on loading other services and loads GDM. I have to CTRL+F1 to get to my script. I want my script to pause the init system till it ends doing it's stuff and the the other services can go on loading.
I tried
#X-interactive: true to no avail.
I had Vista on my laptop and then started dual booting with windows.downloaded ubuntu today and installed but just not feeling it. i have looked in add remove programs but its not there. can someone point me in the right direction. How do i remove ubuntu including the grub screen and free the space up on the hard disk because i'm missing 25gb.
View 4 Replies View RelatedI tried to install ubuntu 9.10 with the live cd, but my computer freezes on the welcome screen, where you select the language (for the second time).After that the ubuntu logo starts pulsing and after a while the welcome screen appears. At this point, my mouse and keyboard are frozen (though the laser is still working) and the only way is to turn my computer off. I can't even eject the cd rom.
View 6 Replies View RelatedI recently upgraded to the 9.10 version of Ubuntu. Now my screen freezes from time to time and I cannot click on anything. I must do a hard reboot by holding the power button of the PC. Is there a fix for this? Is there a way for me to go back to 9.4?
View 3 Replies View RelatedToday I upgrade my Ubuntu 9.10 pc to the latest Ubuntu 10.04 LTS. The upgrade went perfectly with no errors. But when I login to my account Ubuntu loads but then the screen freezes and nohing happens. Then I am just left with a blank desktop with only the Ubuntu 10.04 background and no panels.
View 2 Replies View RelatedI upgraded a week or so ago to 10.04, and everything was working fine. Then suddenly a few days ago the computer froze at the splash screen on startup. Thinking it was just some sort of neurotic, temporary issue, I restart again, but no luck -- same problem.
In terms of what I changed before the problem happened, I don't recall changing any system settings. On possibility is my changing things to skip the login screen and go strait to my account, but I believe I had done that a few shutdown/restarts before.
Yesterday I upgraded from 9.10 to 10.04 (32 bit). Everything seemed to go well with no errors until the point where the system needed to restart at the end. After it restarted (and every power cycle since), it gets to the "ubuntu" screen with the moving cycle of square dots underneath, and stays there for ever. The screen resolution is absolutely goofed up, the word Ubuntu cannot be clearly read (looks like it is way overdriving the monitor). All letters seem to have like vertical bars on either side.
Below the Ubuntu and the dots, there appears to be two lines of completely illegible text (they just look like multicolored boxes about the size of characters.
I tried using the shift key to get to grub and try to boot into recovery mode--no luck. I tried using grub to boot to the previous kernel--no luck. It just sits there at the Ubuntu screen with this weird resolution/appearance.
I can boot from the Live CD and things work fine. I can see the file system, grub files etc. Any help debugging this would be most useful.
I've been using Ubuntu 11.04 for some time now and I'm experiencing many severe bugs. One of this is very bothering and I still can't find a solution. I experienced many problems maybe related to this, but seems to have gone away by downgrading xserver-xorg-video-ati. Still anyway, when in dual screen, after some time, the screen completely freezes. The system is completely freezed, I can't even go to a shell, but I noticed it is possible to log in via ssh.
I've never had problems with ATI opensource drivers. Now I even noticed a logout problem anyway (which is known as far as I know). Is there anyone else experiencing the same? I found some others complaining about something similar, but not exactly the same and still no solution. Is it possible to somehow debug this when it happens? I have to note that I'm still using kernel version 2.6.35 because the new 2.6.38 is not booting at all. But I don't know whether this is the problem or not.
I'm trying to install on HP ML 350 F13 G6 with standard array controller and 3 drives in raid 5. Well, when the installation process get the screen that shows the files copied (all copied...) , it freezes and does not advance more. Perhaps groped a firmware update? Other distributions are installed correctly.
View 2 Replies View RelatedI just installed ubuntu 10.04.1 using the wubi installer for windows. Installation finished without problems so I restarted my laptop as I was asked to. Then I selected to run ubuntu, there was the black screen "completing installation" and then came the startup where it stopped working.
View 9 Replies View RelatedI just dusted off my old Compaq Prezeio 900Z. Unfortunately, when I try to install Ubuntu, it screen freezes on me and the computer restarts.
View 9 Replies View RelatedOk, so I just finished correcting my driver issue with my wireless card when I'm struck with another problem....after gaining access to the net and updating my packages, ubuntu fails to boot up. It freezes at the boot screen where it runs the 5 orange dots with the ubuntu logo.
View 1 Replies View RelatedAcer desktop m3641
mcp73 (the motherboard?)
Intel pentium dual cpu e2200
ram 2gb
hdd 300gb
The only os is debian and there is plenty of space on the hdd.
Symptoms: When I click on something, say Evolution or Empathy or Maps, about 1 in 5 times the screen will freeze and I have to switch the computer off and on again.
I had this problem with Wheezy and could not resolve it. In the past week I have installed Jessie 32bit and then Jessie 64bit and I get the same problem.
On downloading my copies of Jessie I have verified the md5 and sha.
I recently upgraded from Hardy to 9.10 Kubuntu. The install went smoothly, and when I boot up, the loading screen (the one with the progress bar) does its thing. Then I see the 'waiting' cursor (in Kubuntu, the two dots chasing each other around in a circle). I see this for about two to three seconds, then the entire thing freezes up and I can't do anything, including switching to a virtual console. How do I figure out my system's dying words so I can figure out what's going wrong? As a (sort of) aside, when I open files in /var/log for reading with cat <file> | less, I have to Page-Down a whole bunch to get to the most recent stuff. Is there a way to jump to the bottom, or read with something other than what I have been using?
View 1 Replies View RelatedI start using Ubuntu, after successfully installed it without any problem.Then I downloaded latest updates, etc. But,after installing a display driver, my computer freezes, refusing to go beyond the welcome screen. I tried several ways but could not solve the problem. So I decided to re-intall Ubuntu, download again the updates, again configure my settings, etc. herefore, I'd like to know whether there is any application to backup or to create a full image of a hard disk so as to avoid the long hours of re-installation.
View 4 Replies View RelatedI have used Universal USB Installer to extract the xubuntu 10.10 iso and install onto a flash drive. I would like to try a live version of xubuntu that boots from a flash drive. When attempting to boot from the flash drive, the screen effectively freezes after displaying the syslinux / ebios copyright message, with a flashing cursor.
Does anyone know a possible cause or solution? Information that may be useful: I am using a 4GB flash drive, formatted as FAT32. I formatted once using the Universal USB Installer, but some files were left on the drive, so I have reformatted it using the option provided by the Windows interface, (and reinstalled xubuntu.)
When I opt to install onto USB with a 2GB persistence file using Universal USB Installer, the installation processes hangs with a dialogue saying there are 0 seconds left to copy, until the dialogue is forcefully shut (and installation appears to be successful). When I select no persistence file, the process does not hang. (I am faced with the same aforementioned problem at boot time, regardless.)
I have not checked the md5sum (though I have no reason to suspect it will fail.) I have downloaded a simple programme which checks a single md5sum against a single file, although I am unsure which file I should check against in the case of xubuntu, and if the md5sum.txt file represents a single md5sum.
I am using Windows Vista on an old Toshiba Satellite. I am new to using linux, and am very unfamiliar with the the setup and installation procedure.
I have a Lenovo Thinkpad T520 laptop with Nvidia NVS 4200m Graphics card. I installed Ubuntu 11.04.
Before I installed Ubuntu 11.04 I had went to my bios and disabled Nvidia Optiums and changed the graphics to Discrete Graphics. Then inserted my Ubuntu 11.04 CD and installed.
With this I had gotten unity to work. However when I pull the power cable from the laptop my screen freezes. Also if press "FN"+ Home or END to change the brightness of the screen my screen freezes and no longer able to move the mouse or press anything on keyboard.
Did anyone ever run into this problem and or fix this issue? I can get the graphics working properly with Ubuntu 11.04 with Unity with a Nvidia NVS 4200m graphics card.
When I installed Kubuntu 11.04 using Wubi it did not load the Ubiquity installer like it normally does. Instead the boot screen (image attached so you know what I mean) remains displayed for the entire installation. The installation works fine once installed but I was wondering if this is normal or not?
View 2 Replies View RelatedI am attempting to get Debian+Mate running on my laptop, with no success. I have not yet used Linux, but I do wish to climb out of the Window, and the Live session seems ideal to get a feel for Debian before finally abandoning Windows.
I got the Debian+Mate ISO file from the Debian website, and created a bootable USB stick. (Note : I have done this several times, getting new ISOs, and using Unetbootin, Universal USB Installer, and Linux Live installer; the result is always the same.)
When I boot the USB drive, all appears good at first. I get to the Debian (or Mate?) screen which is a pale jade green with a white squiggle in the middle region, with a panel at the top; this shows at left three options - applications, places, and system; and at right the correct time, a sound symbol,the wifi symbol, and a battery indicator. At the left of the screen in vertical arrangement there are 4 icons labelled computer, users home, install Debian Sid, and trash. On the bottom panel, at left there is a "button" for "click to hide all windows & show desktop", and at right 4 squares for workspaces.
There are also (temporary) windows that inform me that the battery is no good (I run on mains), and that there is no wifi connection established. These windows disappear in a minute or so.
The cursor moves ok. The only actions that it creates are the information drop-down texts that tell me what the headings mean - e.g. no connections when I hover the cursor above the wifi connections symbol.
But whatever I attempt to do - selecting any of the options - nothing happens. Everything except the cursor appears to be dead.
The machine that I am using is an old laptop that I use as a second computer. It has a SIS Mirage 3 graphics engine, which I gather may be a problem. I also tried the same procedure with my fairly modern ASUS laptop (NVidia graphics) with exactly the same results; it seems that NVidia graphics may also be problematic, judging from some posts on the web. I have also tried Debian+Cinnamon, again with the same outcome.
I am trying to install fedora 10, 64 bit on computer with the following specification but the installation stops during installation (mouse , keyboard, screen freezes).
Motherboard Gigabyte GA-MA790GP-ud4h rev.1.0
processor AMD phenom ii 940
I have updated the bios to the latest version.
Tried the DVD install for 10. Install went fine other than it take for freakin ever, but after an 1 hour install, the update wanted to install 1675 or so updates. I let those updates install. 5 hours later the updates were done. Rebooted and now it freezes at a blank screen right after the 3 scrolling bars. System is older AMD 3000+, 1 GIG RAM with NVidia 5700 video card.
I did try and search some. But the only thing I could find was something about editing my grub file for a scan=sync setting (the information was basically gibberish to me. No clue what it was talking about or how I would edit a file on a system that won't boot). I tried to recover mode off the live CD. It had some options that said you could type Linux command line arguments, but whenever it got to the sysimage it says Linux isn't a command.
I ran Ubuntu desktop for a while then installed Ubuntu Server 10.4. I restarted the machine after install and now I am freezing at the BIOS loading screen right after the "Intel (R) Matrix Storage Manager option ROM v6.0.0.1022 ICH8R" part.Have tried: taking all USB devices, cd's, etc, out.Edit: ATA AHCI BIOS, Version iSrc 1.02.23 11212006Am installing on a Dell Dimension E520
View 1 Replies View Relatedi want to make my centos5 a virtual SAN (storage).
View 1 Replies View RelatedAm I asking too much for a FREE OS? Everybody spend their precious time to help others, that's very helpful.But it seems like there is no support from UBUNTU team,how could we even get through the barrier of not using Microsoft's OSes? No free lunch of course, but it seems to me some issues have never really been solved.I read lot's of people have problem with their WIFI, not just for my OLD USB wifi adapter. I don't have problem with WIFI in XP/Server.
I posted here and there, and seems like no answer, and I do not get any reply from UBUNTU support team,forgive me if I run out of google's keywords.I just need a simple answer, is my WIFI going to work in UBUNTU with a layman effort? I like linux and UBUNTU had put great effort in providing me such a great OS, but if a basic internet connection will need to spent sooo much time to setup, and it still doesn't work. IS IT WORTH to switch to UBUNTU at all
I burnt the Ubuntu 9.10 ISO to CD and installed on a freshly nuked Dell 2350. It is pentium 4 at 1.8 MHZ with 512 RAM. Just a spare machine I have sitting there. Install went fine, restarted box, boot from hard drive. I get the little white Ubuntu symbol on a black screen and then a black screen with un-occupied white tool bars at top and bottom of screen and a functional mouse pointer, then nothing. It freezes there.
If I restart by holding the power switch in it occasionally shows multiple CPU overtemp messages and freezes with totally black screen. I can run the CD live and everything works like a champ. I'm going to like Ubuntu once I have this sorted out. If I boot from CD and choose the run from first hard drive option, everything loads and works fine. I was able to remove CD, update and save preferences, etc..
On one occasion, I was able to restart and boot from hard drive and it worked fine but usually it freezes at previously mentioned black screen with white bars top and bottom with mouse pointer. Please excuse my ignorance as I have very little knowledge of the inside workings of computers. I didn't even know about burning ISO's or changing boot orders until reading online. For what it's worth, the computer worked fine with no known hardware problems when it was running XP. It also is completely stock with no mods or added/replaced hardware.
I Have 10.04 LTS I want to make a more secure storage with 3 PATA 300GB disks. I think a raid5 is the best. I don't need to boot or have a system on the storage volumes.i have find some guides, but they are for raid on system-disk and make them bootable, and seems to be to complicated for me.
I have made ext4 volumes on them and flaged them as raid in gparted.