a fresh install of 10.04 all worked well installed apps as i wanted all went well... system update download completed no restart required... restarted anyway only get grub prompt... repeated this operation twice.... how do i fix getting fed up with ubuntu promising easy of use ...
View 6 Repliesyesterday I updated my squeeze amd64 on my Phenom X4 and now it is not booting anymore. Have you experienced the same problem?
After that I noticed the shutdown was not working anymore, it just restarted instead of powering down. This morning it wouldn't boot squeeze anymore, when grub starts and prints "Welcome to grub" (or something like that) the list of operating systems is not shown.
I noticed the updated also included grub and I saw it correctly detected my operating systems.
I am planning to boot knoppix soon and try to reinstall grub from chroot, but currently I am at work.
after doing an upgrade to 10.4 and updating grub I get this message. how do I address this
[Code]...
Every time I use GRUB to boot into Win7, I can't reboot back into GRUB or Windows. I think Windows is forcing itself into the MBR then proceeding to corrupt it. I believe I can just boot into a Live session use "sudo grub-install /dev/sda", but that seems like a lot of work just to reboot.
View 1 Replies View RelatedIt seems that updating the Kernel breaks my installation. I've tried it twice, and both times it disabled my gui desktop. I'm posting this with links2 in my terminal. The terminal works perfectly.
This is really annoying, as I can't even use my computer. What do you think is the problem?
I updated my server (Ubuntu 10.04 LTS) today and had about 23 updates in Webmin. After the update suddenly apache doesn't render php pages anymore, instead letting you download the source code for the scripts. I checked the logs and found this:
Code: Syntax error on line 1 of /etc/apache2/mods-enabled/php5.load: Cannot load /usr/lib/apache2/modules/libphp5.so into server: /usr/lib/apache2/modules/libphp5.so: cannot open shared object file: No such file or directory I tried reinstalling php5 but I can't get it to work. I also hope that this was a glitch and that updates that break stuff like this don't get through QA.
I did an update during a time when power was cycling due do a nasty snow storm, but I'm pretty sure the update was completed successfully before I lost power. What did happen though is that my BIOS setup was reset.
Now if my HP Laserjet 1020 is plugged into USB during boot all other USB devices freeze for a while. So I played with my BIOS setting for USB:
- Enabled V1.1 and V2.0
- Disabled System USB Shadowing
So now my bootup doesn't hang. But now when I actually go into Karmic I still can't print.
dmesg shows the following:
[ 205.940008] usb 1-10: new high speed USB device using ehci_hcd and address 9
[ 219.510026] hub 1-0:1.0: unable to enumerate USB device on port 10
[ 223.430008] usb 1-10: new high speed USB device using ehci_hcd and address 10
[ 223.600766] usb 1-10: configuration #1 chosen from 1 choice
[Code].....
early tl;dr: The fancy grub breaks on my wubi 10.04 install, can I force it to use the old grub?
When I rebuild grub.cfg (last time was yesterday for kernel update to .37), and shut down / reboot, grub breaks because it can't 'loadfont' and a few other errors which are related to the 'graphical' grub boot menu.
To fix this I have to boot into a live CD (also Ubuntu 10.04) and run the following:
Taken from [URL]
Code:
sudo fdisk -l
sudo mkdir /win
sudo mount /dev/sda1 /win
sudo mkdir /vdisk
sudo mount -o loop /win/ubuntu/disks/root.disk /vdisk
[Code]....
I know how to fix it but is there a way to skip having to do this on upgrades
(If I edit the grub.cfg before shutting down then this doesn't happen, obviously, but sometimes I forget and this is the result. I'd rather stop the problem at it's source than fight against the updater).
I just updated my kernel to the latest version (2.6.35-24). Now my suspend function on my Thinkpad SL510 no longer works. The system simply hangs with a solid cursor in the corner of a black screen. USB devices remain powered on, HDD keeps spinning, and all indicator lights remain lit. When this happens, the only thing I can do is hold the power button down for a hard power off.My first thought would be to troubleshoot this with dmesg, but I don't know how to record dmesg after a power off. The message buffer is reset when I reboot.
View 1 Replies View RelatedMy mythbuntu 10.10 system including its lirc managed remote control has been working fine.I've recently done some updates (see below) and now the remote doesn't work correctly (only some of its keys seem to work). I suspect that lirc is no longer managing the remote and now instead the remote is now being treated like a keyboard.How do I get lirc managing my remote control correctly again,Before the updates the kernel was:
Code:
$ uname -a
Linux pvr 2.6.35-28-generic-pae #50-Ubuntu SMP Fri Mar 18 20:43:15 UTC 2011 i686 GNU/Linux
[code].....
I updated my fedora 12 GNOME installation. Now Compiz fusion is not working. It says Accelerated 3D support not found. Though Nvidia drivers are already installed. Now I can't even ALT+TAB between open applications.
I tried "metacity -- replace" but then windows wore a weird look with only a minimize button. No sign of maximise & close buttons.
I updated last night and after a reboot I can get the GDM login but as my desktop loads it suddenly stops and complains of an error and won't load. If I load legacy Gnome desktop with Compiz it loads but ALL the lettering and words on the interface are messed up. By this I mean the letters are upside down and the words are spelt backwards. The mouse menus also work in reverse as in the menus themselves are also upside down and the highlighting moves from bottom to top as I move down the menu. Amusing but not what I want from my computer. There is nothing in /var/log/messages or /var/log/Xorg.0.log that would indicate anything is wrong.
I sooo don't want to have to rebuild, again, because of instabilities in F15 updates.
I just got a set of updates from Xorg11 (Index of /repositories/X11:/XOrg/openSUSE_11.1/i586) repository and now, my X doesn't come up. During update, zypper complained about xorg-x11-libxcb and it didn't get updated. On further investigation I noticed that libxcb-xlib.so.0.0.0 is missing in the new package (version 7.4-4.2. The one currently installed in 7.4-1.24).
View 9 Replies View RelatedEverything was working great till I updated about 8 days ago! I have since been un able to find a solution.
PC Modle MSI Wind U230
lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
[Code]....
I'm currently upgrading from 10.04 to 10.10 and the screen is stuck at:
Code:
*** 00_header (Y/I/N/O/D/Z) [default=N] ? y
Installing new version of config file /etc/grub.d/00_header ...
[code]...
I upgraded my Linux kernel from 2.6.35-23-generic to 2.6.35-24-generic and the Broadcom wireless STA driver stopped working. If I try to reinstall it with Jockey it fails and shows this in the log:
[Code]....
I installed Chromium via a repo generously maintained by Tom "Spot" Callaway. Since it's his repo I thought I'd contact him, but I don't really know how - so I'm brining my issue to the forum to see if anyone has a possible solution.I've been using Tom's Chromium fine for the past couple months. After a "yum update", Flash no longer works in Chromium. It works in Firefox. If I try to play any Flash videos it's just a blank box.
View 3 Replies View RelatedAfter I had upgraded the system to Fedora 14, the icons for pretty much everything except for programs and plain text files in gnome theme (and every other theme that shares them) became inaccessible - they are replaced by a standard icon that appears when no other is found. Other themes, that share no icon with gnome (tango, gnome-colors, etc.), work correctly. I'm using Xfce desktop.
I've deleted icon-theme.cache, but it did nothing.
Any suggestions, what may be causing this?
I run an Aspire One 522 with a Broadcom BCM4313-Wlan-Card and Fedora 15. To run the card, I had to install der broadcom-wl-Driver, as described here: [URL]... It worked okay. (Althought not perfect. It crushed everytime the whole system, when it tried to connect to a WLAN-Net, unless I first started the Windows on the computer, then shut it down and restarted Fedora. But maybe thats some strange Dual-Boot-thing.) Anyway. After I updated the Kernel to 2.6.40 it seems to be broken. I deleted the driver, reinstalled it, tried the B43-driver. But no mater what: It seems like the NetworkManager doesn't find the card at all. lsmod shows that a modul "wl" is running. And - as mentioned - I installed the Kernel and the two other packages fresh form the repositories.
View 3 Replies View RelatedI am not fully sure if this belongs more to the networking section or the software. O hope it is related to here enough.
My problem is as the topic says.
My port 80 seems to be already taken. lighttpd fails to start reporting that it cannot bind to port cause its already taken.
The error message itself:
Code:
"Starting web server: lighttpd2010-02-21 07:01:02: (network.c.345) can't bind to port: :: 80 Address already in use failed!"
I am not able to crack this by myself. Ihve tried investigating this by
Code:
lsof -i :80
netstat -ape | grep -v unix
First doesn't show anything second anything abt port 80.
Now hints I can think of. Maybe you have more experience and ideas what I can do and where should I look for the culprit.
I am using debian (unstable) and lighttpd. I even tried rebooting; it says that the port is taken already at the boot sequence (well it starts pretty much at end anyway but the system should be clean).
It seems that it started failing after a major distro update, so maybe there are some conflicts based on ipv6/v4 or something, though I have no idea what it could be. Well my hit for that is the part of error msg "bind to port: :: 80 ". This "::" looks like ipv6 naming convention. Maybe its lighttpd internal.
I have just updated my Squeeze system. The update included a newer version of network-manager (and it can not be more than a few hours old). After the update all network functionality on my machine (via knetwork-manager) is broken. The GUI applet has no effect.
Hence can anyone help me: a) Downgrade network-manager by one version; b) Find out what is causing knetworkmanager to break; c) See if the problem is with knetworkmanager or network-manager.
After the latest update of Debian Wheezy, about three days ago, one of my machines won't boot anymore. The update was done by:
Code: Select all/usr/sbin/update-smart-drivedb
apt-get update
apt-get -y upgrade
apt-get -y autoremove
I get the error message: "Alert! /dev/disk/by-uuid/71c... does not exist. Dropping to a shell!"
The dir /dev/disk contains only "by-id" and "by-path".
I booted with the rescue system, dropped into a shell and recreated the ramdisk with
Code: Select alldpkg-reconfigure linux-image-3.2.0-4-amd64
dpkg-reconfigure grub-pc
But without success. On another machine the update went flawlessly.
I'm trying to update my Ubuntu 10.04 to 10.10... But I get this error message:pkgProblemResolver:Resolve generated breaks, this may be caused by held packages
I tried to disable all the repositories, and also "sudo apt-get -f"... But still having this error message...
I have a dual boot computer. I seem to be having a bit of a problem with Grub lately. Every time I do any kind of update in Debian Lenny AMD 64 it borks my Grub. The first time I had to change a few lines in menu.lst (hd1,1 to hd0,1), no problem. The second time, things went downhill fast and G-Parted was giving me errors on my NTFS partitions. I had to do an XP repair, fixboot, and I had to reinstall Grub completely to the MBR.
Now, I having a "Grub Loading stage1.5. Grub loading, please wait.... Error 22". All I did was update Debian Linux and shut down. From my initial searches this is an error relating to not finding the correct partition. I have booted with a G-Part CD and it shows all my partitions. I do have a Windows XP Home boot cd if I need it. Here is my partition outline if you need it:
/dev/sda1 NTFS (Windows) flags--boot
/dev/sda2 Ext3 (Linux)
/dev/sda3 FAT32 (shared space between Windows and Linux)
/dev/sda4 extended
/dev/sda5 linux-swap
I'm running Virtualbox from the Sun website (need the USB support) and it breaks after each kernel update.The problem is that I installed a lot of Ubuntu systems for transitioning windows users with Windows in virtualbox to ease the migration but I have to rerun vboxdrv setup after each kernel patch.
View 2 Replies View RelatedI received stunnel 4.40-0.6.1 as an update from "zypper up" (openSUSE 11.4).After a reboot, stunnel does not work anymore for the programs that need it.Symptom: the program (emacs+mew) hangs for ever, telling me
"Creating an SSL/TLS connection..."
/var/log/messages does not contain a clue and restarting stunnel via
"rcstunnel restart" looks fine:
[code]....
I was unaware of the difficulties of installing and booting Ubuntu from the "onboard raid" that the NVIDIA nForce chipsets provide. However, I've managed to get it working reliably with one single caveat:
When update-grub builds the grub.cfg, it refers to all of my partitions as follows:
Code:
menuentry 'Ubuntu, with Linux 2.6.35-27-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(/dev/mapper/nvidia_caifaefg,msdos5)'
[Code]...
So I'm guessing that the whole nvidia_blah,msdos5 is because of that. However, it doesn't seem to explain why Grub would THINK that would work and it in fact does not work. That's the biggest source of confusion on my part.
My questions are as follows: First off, because as an IT person I want to know: Why does this sort of change work? What does changing that device name change in GRUB's behavior? Is there a setting in /etc/default/grub that would change the way it's naming these RAID devices? Is there a value for this setting that would give me the device names that work, as explained above?
If there is no setting change I can make in /etc/default/grub, could I add a sed command on to the end of update-grub or can I make a modification to one of the scripts in /etc/grub.d? What sort of change would be recommended? How would I preserve this change through later package upgrades that would possibly rewrite these files?
I have an old BIOS (only 149 GB detected in 160 GB drive). I have installed very few OS as a result - Windows in first 80 GB , 2 distros (20 GB each) in next 40 MB which is within the 149 GB. On issue of "update-grub" grub seems to detect all OS and generates grub.cfg. But on boot , one distro does not appear in the menu.
View 3 Replies View RelatedI have 2 hard disks. sda,sdb
In sda, I have 4 partitions, and I have windows 7 in one of the extended partitions [not in the primary partition].
In sdb, I have 3 partitions. 2 for storage, and 1 10GB drive for Ubuntu. Again, Ubuntu is not of a primary partition.
I had ubuntu 10.04 running on that for a long time. However, I wanted to reinstall ubuntu and use 10.10.This is what I did EXACTLY:Booted from Ubuntu install CD
Chose advanced istall
Selected sdb3 for Ubuntu
I installed GRUB2 on the SAME partition as Ubuntu aka sdb3 Installed then rebooted
I can boot into Ubuntu fine, but whenever I select Windows 7 bootloader from the GRUB menu, the screen goes black, and my PC reboots.
Boot Info:
Code:
Boot Info Script 0.55 dated February 15th, 2010 [code]....
ls: reading directory sda6/: Input/output error
I have tried the testdisk/update-grub method, but it didn't work.
Ran the updater, went to boot to Win7 to use Photoshop and realized that the grub menu was gone. Ubuntu boots by default now. I tried running "sudo update-grub" at a virtual terminal and while it listed the various linux kernels ok, it then got caught in a loop spitting out some crazy looking errors. I rebooted and Ubuntu came up fine. I tried running "sudo update-grub" again from the gnome terminal and it hangs the whole computer for a few minutes and finally gives me this:
[Code]...