Debian :: Squeeze Update On 2011-07-21 Breaks Grub?
Jul 22, 2011
yesterday I updated my squeeze amd64 on my Phenom X4 and now it is not booting anymore. Have you experienced the same problem?
After that I noticed the shutdown was not working anymore, it just restarted instead of powering down. This morning it wouldn't boot squeeze anymore, when grub starts and prints "Welcome to grub" (or something like that) the list of operating systems is not shown.
I noticed the updated also included grub and I saw it correctly detected my operating systems.
I am planning to boot knoppix soon and try to reinstall grub from chroot, but currently I am at work.
View 2 Replies
ADVERTISEMENT
Feb 7, 2010
I have just updated my Squeeze system. The update included a newer version of network-manager (and it can not be more than a few hours old). After the update all network functionality on my machine (via knetwork-manager) is broken. The GUI applet has no effect.
Hence can anyone help me: a) Downgrade network-manager by one version; b) Find out what is causing knetworkmanager to break; c) See if the problem is with knetworkmanager or network-manager.
View 5 Replies
View Related
May 18, 2010
Last nigth I upgrade my system to squeeze and it whent well except for grub-pc and udev. If i try to upgrade now udev will not install do to problems with the kernel version and grub-pc can't seem to find the boot image.
[Code].....
View 3 Replies
View Related
May 28, 2010
a fresh install of 10.04 all worked well installed apps as i wanted all went well... system update download completed no restart required... restarted anyway only get grub prompt... repeated this operation twice.... how do i fix getting fed up with ubuntu promising easy of use ...
View 6 Replies
View Related
Feb 14, 2010
I have XP and win 7. I want to triple boot with Debian.When I install, grub finds win 7 and XP and says everything should be fine, but then when I boot, only debian appears.This was fixed by doing update-grub2 after logging in.Now, I have win 7 bootloader as an option. However, when I boot into XP, and then reboot, grub disappers. he screen just says welcome to grub and then a blinking cursor.
View 10 Replies
View Related
Aug 31, 2010
I recently did an update squeeze and the next day after I restarted there was only a blank screen.The laptop started, the system installed, the wifi connected but no gdm.I started in recovery mode and tried;
# invoke-rc.d gdm start, and got the response that it was an invalid command or words similar to that.
# startx, gives me a blank screen with an unblinking cursor.
# apt-get install gnome, tells me that the latest version is already installed.
If it has any bearing on the issue, I dual boot with Ubuntu and that works fine.Is there anything to be done to fix the problem?
View 14 Replies
View Related
May 4, 2010
I installed squeeze with 2 drives, one for squeeze (2.6.32-3-amd64 using 120GB hdd), and one for my old winxp. I used LVM with ext4 on /root, /home, and ext2 for /boot. The install gave me grub 1.98.
When booted, screen says
Loading Grub
Welcome to Grub
View 1 Replies
View Related
Aug 23, 2010
I decided to upgrade to Squeeze from Etch.
not upgrade, but moving from etch to squeeze.
Clean new install. Format disks, re-partition...etc.
All goes perfectly well, until I reboot into my newly installed Squeeze.
After the messages from the bios motherboard, there is a black screen with a flashing cursor, and nothing else happens. Now it should have been the GRUB coming up and asking which system to boot into. But there is nothing at all on my screen.
I thought I've done something wrong during install, so I formated the disks again, and re-installed squeeze again. Just paying close attention to every message, before I went further.
And AGAIN, when rebooting into the system, there is nothing on the screen.
View 3 Replies
View Related
Mar 23, 2011
I have an offline machine and the full 8 DVD repository set and have added them to the system and they work fine to install packages. I used jigdo to download the update 6.0.1 DVD and the "packages" file and the one inside of "packages.gz" are empty files. This prevents the disk from working at all. I'm not sure who to report this to.
View 4 Replies
View Related
Jul 8, 2011
I cannot update my system either with Update Manager nor with Synaptic. The system tries to download the updates, and then generates an error message that I have broken packages. So, I click on Fix Broken Packages, etc., and when running get the following error message:
E: /var/cache/apt/archives/libavcodec52_5%3a0.6.3-0.0_i386.deb: short read on buffer copy for backend dpkg-deb during `./usr/lib/i686/cmov/libavcodec.so.52.72.2'
This appears to me to be a system bug. I'm running the 32-bit version of Squeeze. Re-install, or ?
View 4 Replies
View Related
Feb 12, 2010
I just did an update of my Debian system from lenny to squeeze as described here. I got some errors during the install, saying that glibc couldn't be updated. I did an apt-get -f install, which gives me the following warning: WARNING: this version of the GNU libc requires kernel version 2.6.18 or later. Please upgrade your kernel before installing glibc.
The installation of a 2.6 kernel could ask you to install a new libc first, this is NOT a bug, and should NOT be reported. In that case, please add lenny sources to your /etc/apt/sources.list and run: apt-get install -t lenny linux-image-2.6 Then reboot into this new kernel, and proceed with your upgrade dpkg: error processing /var/cache/apt/archives/libc6_2.10.2-2_i386.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Errors were encountered while processing:
[Code]...
View 2 Replies
View Related
Apr 13, 2011
While on the 32 bit version i haven't problem. I use different profile for the stable and the nigthly versions. Note: I use the binary taken directly from mozilla and update regulary it directly from the browser. On the attachment you can see what should be appear after the update.
View 2 Replies
View Related
Mar 2, 2011
I try to install to my desktop as Squeeze/ISPConfig3 server, but GRUB does not load after several re-installations.
I have
- 6 x 500GB HDs
- ASYS A8N-SLI Bios SLI-RAID active as only then RAIDSata1-RAIDSata4 can be seen 2 x RAID1 (has to have something) and all drives can be seen by Debian-installer as individuals Same has been working with LinuxMint (both LM10 and LM Debian Edition) (with and w/o fake-RAID)
1st test: Guided partitioning (LVM) for one disk (where /boot will be separated) => Installation OK and starting.
[Code]....
View 9 Replies
View Related
Feb 11, 2011
I'm configuring a machine with Debian 6. I booted from the DVD, took the defaults, and it eventually came up with a Gnome desktop. Everything worked as expected.
I then installed gcc, g++, the Debian kernel source, and built a new kernel with preemptive multitasking turned on. It built clean, I ran "make install" and it put the kernel files in /boot. I rebooted and got a kernel panic error, to the effect that it couldn't find the root filesystem.
/boot/grub/grub.cfg shows
"linux /boot/vmlinuz-2.6.32-5-686 root=UUID=1890437b-5884-4b83-97cf-62d39f63c872 ro single"
for the original install, but the entry for the new kernel has
"linux /boot/vmlinuz-2.6.30DW-preempt root=/dev/sda1 ro quiet"
/etc/fstab has
# / was on /dev/sda1 during installation
"UUID=1890437b-5884-4b83-97cf-62d39f63c872 / ext3 errors=remount-ro 0 1"
I've tried changing the grub entry to UUID, but the new kernel still panics. grub-mkconfig and update-grub just rebuild the split UUID=/sda1 grub.cfg. The new kernel still seems to be looking for /dev/sda1 even after changing grub.
View 5 Replies
View Related
Jan 7, 2016
I try to update the packages before upgrade to wheezy,looks like when I run apt-get update,it shows error as per below:
W: GPG error: http://fosiki.com stable Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 379393E0AAEE96F6
rat:~# apt-key adv --keyserver keyserver.fosiki.com --recv-keys 379393E0AAEE96F6
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --
[code]....
View 9 Replies
View Related
Dec 21, 2010
I have done a update from Lenny to Squeeze with the update manager within Gnome. And there was a error 126 and the update broke off leaving me with a non working system. The system does start into Debian Squeeze to the command line. Users are in place and a login is possible. X does not work and there a lot of broken and defect packages. I want to repair my system. Is a restore without losing the configuration possible?
View 14 Replies
View Related
May 17, 2010
I updated today and naturally removed the old nVidia driver, compiled it again after a reboot, and then rebooted again for good measure. I can log into KDE4, but all I get is a cursor and a solid black background. I deleted the ~/.kde, ~/.local, and quite a few other directories from my normal user account using the shell so KDE would reconfigure my settings when I logged in again, but it's the same problem. I went into ~/.kde/share/config/kwinrc and added the "Compositing" section with "Enabled=false" to rule out compositing. Now when I log into the system I get the default KDE4 wallpaper and a mouse cursor, but nothing else. I believe the latest update broke KDE4, or am I missing something? I have recreated my xorg.conf as well, and only set it to use the nVidia driver. So what can I do now?
View 3 Replies
View Related
Jun 1, 2010
I have been having problems with Squeeze last day or so, but thought would do all system updates available in hope this would stop the system crashes only to find that upon reboot my dock of choice, Cairo-Dock, which is set to auto start puts a message on screen saying it has no plugins available and that it will not run as a result. And it just won`t run. The update included updates for Cairo Dock and it`s plugins, which it seems have all updated correctly and package manager says every available plugin IS installed as it was before, what I can do to correct this annoying issue?
[Code]....
View 4 Replies
View Related
Jun 14, 2010
I've been using the testing branch for quite some time with no major issues. However, yesterday's upgrade (I run dist-upgrade roughly every day or two) I've been experiencing some very low FPS rate - about 150-250 according to glxgears. My gfx card is a bit old - Radeon Xpress 1100 (200M).
Xorg.log and syslog are both fine. I've tried forcing the "radeon" video driver in xorg.conf as well as the automatic "ati" value without any effect.
It could be a bug, or it could be something resulting from the upgrade of any of the packages.
View 2 Replies
View Related
Jan 29, 2010
I just installed squeeze and at finish it asked me if it write the MBR with gurb.
I say yes, but after restarintg, squeeze doesnot appear in grub.
I also have lenny in the same PC. code...
How can I run squeeze I just installed.
View 12 Replies
View Related
Jun 4, 2011
I recently purchased a new Lenovo Thinkpad T420i and am having problems installing the latest version of Squeeze from CD. After receiving the laptop, I started it up, configured Windows 7, and confirmed everything is working correctly. Next I went through the Debian installer, which completed successfully. I'll be dual-booting Windows 7 and Debian, so at the partitioning stage I resized my NTFS partition, added a shared VFAT partition, then used the "Guided" install to create my root and swap partitions. My partition layout is code...
I assumed something was wrong with grub, so I booted the CD into rescue mode and chose to reinstall grub onto the Master Boot Record. But nothing changed. Just to experiment, I went into fdisk, deleted all my new partitions (leaving just the Windows ones), and tried rebooting, but the same error happened. I then went through the Debian installer again, being careful to set everything up correctly, but still, the device won't boot.
I'm not even getting to the grub boot screen, so something is wrong even before the point. Reinstalling grub to the Master Boot Record (grub-install /dev/sda) isn't changing anything. How can I troubleshoot this?
View 8 Replies
View Related
Apr 22, 2011
When updating from the last Debian Live image (Squeeze) to the current Debian testing, apt announces a lot of packages being not required:
The following packages were automatically installed and are no longer required:
openoffice.org-draw libpcsclite1 libwpd8c2a usb-modeswitch gtk2-engines-smooth dnsmasq-base tomboy
libmono-security2.0-cil libgsf-1-common update-notifier-common libndesk-dbus1.0-cil libmtp8 libmono-addins-gui0.2-cil
gnome-js-common pnm2ppa libavutil49 libhal-storage1 libmono-system2.0-cil update-notifier python-mako
openoffice.org-officebean openoffice.org-emailmerge network-manager-gnome openoffice.org-impress gdebi libgpod-common
[Code]...
These include some important packages, like network-manager-gnome for example. Was it really intended to be removed? Without it, it's impossible to manage network connections from Gnome (only manual option of editing interfaces config is left). Is it a bug, or some incomplete intention? apt suggests to autoremove these packages. Should they all be retained, or only some of them, or it's supposed to be none? Removing some of them makes sense for me (like Epiphany for example), but some not at all.
View 3 Replies
View Related
Mar 29, 2010
Have my proxy running on Lenny and tried to upgrade to squeeze. Originally the system was installed on Etch and upgrading to Lenny was no problem. In the system i have two RAID1 volumes, md0 for / and md1 for /home. For upgrading i added the sources to my apt.conf and startet dist-upgrade. During the installation procedure, when installing udev I was advised to install the new kernel first and continue upgrade after booting the kernel. so I installed the kernel by "apt-get install linux-image-2.6-686. When generating initramfs there was a message, that there are no arrays defined in /etc/mdadm/mdadm.conf I took a look and there were none. mdadm seems to have been update before.
I then added the lines for RAID definition and added the data for UUID The UUID I got from the output of "mdadm --detail /dev/md0"
What I don't understand: blkid gives the same UUIDs for the first partitions of the RAID and a different UUID for /dev/md0 and /dev/md1 than mdadm --detail The update of initramfs for kernel 2.6.32 then gives this result:
update-initramfs -u -k 2.6.32-3-686
update-initramfs: Generating /boot/initrd.img-2.6.32-3-686
W: Possible missing firmware /lib/firmware/e100/d102e_ucode.bin for module e100
W: Possible missing firmware /lib/firmware/e100/d101s_ucode.bin for module e100
[code].....
View 12 Replies
View Related
May 11, 2011
I'm using Squeeze amd64, installed latest kernel 2.6.38 from backport yesterday. Just now try to check for any update but failed, these messages show.
View 2 Replies
View Related
Jan 30, 2010
After a system update a couple of days back - which as far as I can remember included some xorg packages - neither of the policy files I have written for my keyboard, synaptics touchpad and mouse work.Below are the files and the Xorg log file.
99-x11-keyboard.fdi
<?xml version="1.0" encoding="UTF-8"?>
<deviceinfo version="0.2">
[code]...
View 4 Replies
View Related
Oct 21, 2010
It was no surprise that I needed to reinstall the nvidia driver after a 2.6.32-5-686 kernel update a couple days ago, but I was surprised that it didn't work. I've had to drop back to a kernel I compiled a few weeks ago, which is basically the stock 2.6.32-5-686 from that time, with a timer frequency of 1000 and desktop preemption.
Vid card is GeForce PCX 5750
Using NVIDIA-Linux-x86-173.14.22-pkg1.run
This is the command I used:
env CC=/usr/bin/gcc-4.3 sh NVIDIA-Linux-x86-173.14.22-pkg1.run
(After it didn't work, I ran it with --uninstall and tried installing again. No luck with that.)
Here's the nvidia installer log (sorry about the encoding. I don't know what happened with that): [URL]
rivafb, nvidiafb and rivatv are not loaded.
I don't see it in this one, but on a previous attempt, I saw an error message that said no nvidia graphics card was found. I've been suspicious that the card is slowly dying, based on problems like gray blocks on the screen or (in an older lenny install) persistence of the contents of a window appearing inside a terminal, when I switch desktops from the one where the browser is open to the one where the terminal is open. Scrolling the artifact off-screen and back, or window-shading the terminal and then un-shading it causes it to re-draw correctly.
View 2 Replies
View Related
Apr 16, 2011
I run the 2.6.32-5-686 kernel on Squeeze and the bad nvidia drivers. A recent update, and pardon for not noting which, broke 3d games on my box. From a terminal neverputt yields the following error:
ignatius@lapbox 14:56 [ ~ ]:$ neverputt
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 137 (NV-GLX)
[code]....
I can mv xorg.conf to xorg.conf-pre and nexuiz will fire-up. Without 3d of course. I spent an hour or so last week going over my xorg.conf but it just ain't broke! Someone else saw it, too, and reported it but his post remains alone in the thread as of 10 minutes ago.
View 5 Replies
View Related
Jul 24, 2010
After recent update (yesterday) Evolution became almost unusable: if I am going to create a new e-mail or just select a person from Contacts or reply to someone it simply crashes. The update also didn't go very smooth - 15 updates were not applied because of a broken dependency - evolution-exchange, which depended on evolution prior to 2.30.0 but 2.30.1.2-2 was to be installed. Is there a way to make Evolution to work or upgrade solving dependencies?
View 3 Replies
View Related
Mar 20, 2011
I've installed Debian Squeeze on my server several days ago. During install process installer asked me to provide USB flash drive with firmware aic94xx-seq.fw. All went fine. Today I installed all updates to my system with "U" in aptitude. Aptitude installed kernel update 2.6.32-5 and created initrd accordingly. But now I can't boot up my system because it can't find LVM volumes on harddrive connected to Adaptec RAID card. How can I boot my system now? I have USB with firmware.
I have netboot CD. Unfortunately when I tried to edit boot records in grub I found that there is no my old kernel anymore. The only kernel grub sees is the new vmlinuz kernel and new initrd How take make my server alive?
View 2 Replies
View Related
Mar 21, 2011
What happens if I update Debian Squeeze from Lenny's source.list?A step by step manual is written on Lenny, and if I change lenny to squeeze things seem to not work.When I update the squeeze from the original source.list and then change to the source.list that manual uses things are working.But if I were to start squeeze with lenny's source.list I am getting error while trying to do this:
apt-get install wget mc zip unzip bzip2 ntp ntpdate lsb-release.
View 6 Replies
View Related
