I selected the zc0301 driver as module when i compile the kernel...and i copied the "zc0301.ko" file from default kernel...but when insert using "insmod" its not working..showing the error..
insmod: error inserting 'zc0301.ko': -1 Invalid module format
How to insert this driver?
I selected the zc0301 driver as module when i compile the kernel...and i copied the "zc0301.ko" file from default kernel...but when insert using "insmod" its not working..showing the error..
insmod: error inserting 'zc0301.ko': -1 Invalid module format
How to insert this driver?
I am trying to install the video driver for my hp a1010n. The video device is a 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics. I have seen a few sites that have referenced this but they were not written for new users and I could not figure out how to install it. I am fairly adept at usage of computers (mostly Windows OS) but am not yet familiar with Ubuntu so I am aware of the absolute basics... I am just not sure what commands to use in the terminal and etc.. I am running Ubuntu 10.04 LTS
View 2 Replies View RelatedI try to install #yum groupinstall 'Development Tools' it's install all things but at the end it's showing error
View 2 Replies View RelatedI have written FORTRAN77 code,also a makefile. But is not working at all. how to start looking for errors?
View 9 Replies View RelatedI am extremely new to Linux and cannot seem to get Compiz Fusion working. I am running Xubuntu 9.10. I enabled my video driver but the effects still aren't working.
View 1 Replies View RelatedI used leighs post to install the nvidia driver for Fedora 12 and now plymouth does not work it uses the text theme. Right before it goes into the text theme I get this message:
"Unknown boot option `nouveau.modeset=0' : ignoring"
error: No output seen in over 300 sec... (Is the CD-ROM/DVD source repository enabled? It shouldn't be!) error: Package install command failed with error code 255 Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ?
I've tried this [URL] but it didn't work for me. My sources.list already had the #. By the way I'm a new user to ubuntu and I'm having a pretty good time. Almost starting to feel at home in this OS. edit: I'm sorry. I realized I posted in the wrong section.
10.10) now, and only use windows as my DVR (what im currently trying to change). To that end, i have a Hauppauge 2250 video capture card, and Steven at KernalLabs has an alpha release that has been said to work very well with mythTV.
Anyways, i followed one of the posts and successfully compiled the driver using "sudo make menuconfig." I attempted to install with the "make install" command, and the first half of the driver seemed to install and the second half (firmware related) received errors.
make -C firmware install
make[2]: Entering directory `/home/mlavigne/saa7164-v4l/v4l/firmware
Installing firmwares at /lib/firmware: vicam/firmware.fw cp: cannot stat `vicam/firmware.fw: No such file or directory
dabusb/firmware.fw cp: cannot stat `dabusb/firmware.fw: No such file or directory
dabusb/bitstream.bin cp: cannot stat `dabusb/bitstream.bin: No such file or directory
ttusb-budget/dspbootcode.bin cp: cannot stat `ttusb-budget/dspbootcode.bin: No such file or directory
[Code]..
I am new to Linux, but I can't produce any sound out of my speakers. So I downloaded the driver for my sound card from my motherboard manufacturer (it is an on board sound card). Now, if I am right I need to run ./configure . I did this and the following thing happend: Code: checking for gcc gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for executable suffix...
checking for object suffix... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
[Code]...
I am trying to reinstall ATI propietary graphics driver fglrx on Xorg 1.10.0.901, but it always fails with (something similar to): Code: ./default_policy.sh does not support version default:v2:x86_64:lib32:none:[my kernel] make sure that version is correctly set by --iscurrentdistro
I am not sure what is it trying to tell me, neither I don't know why lib32 is in the list. (It's 64bit Gentoo system). It used to work in past, but now I can't start X at all. Using my already installed driver produces Segmentation fault, X without any configuration stops on no devices found.
EDIT: Alright, I just discovered that fglrx driver does not support higher versions of X.org than 7.6, and I have 1.10.0.901 version installed. EDIT2: Actually, later I found out that my Xorg is supported by that driver, so I think it was the mess in packages&Xorg configuration which caused it. Nevermind...
I just installed Ubuntu on my brand new system that I built. I put in my cd for my HD 5770 video card, and an icon shows up on my screen XFX_VGA_V9.8C text under it.
However when I try to access it in anyway, I try to open with autorun prompt, I get a message "This medium contains software intended to be automatically started. would you like to run it?"
I click on run and get "Error autorunning software, cannot find the autorun program."
Is there anyway that I can run this disk. It's important for setup. I cant copy the disk to the desktop, I get errors.
I recently installed realtek sound driver software in my system,
but after installing it,the speakers are not working....
I'm using fedora 13(x86_64).
i just want to make my system speak,like before....
how to make my speakers work ?
I would like to know when usb inserted, its showing cant mount when i clicked details its showing bad blocks in beginning , and smething in /dev/sd6. Can i knw why usb drive cant be mounted automatically , even if its set to do so, and to cope the error mentioned above
View 1 Replies View RelatedI have acer laptop with ATI Mobility Radeon HD 5470 graphics card. I have downloaded ATI Radeon 5xxx driver from ati official site. When I ran it using the command below, it gives me the following error
command:
Error:
Removing temporary directory: fglrx-install.OiFpw4
I recently installed my redhat 6.0 and there was no internet connection so i read some threads that guided me to try and detect my network card which detected nothing. I then went ahead to download ethernet realtek ethernet gigabyte card driver for my version of linux. I untar the file and i got the directory r8168-x.x.xxx.xx, a README file so i read the README file and it asked me to run ./autorun.sh which i did but i got the following error:
View 14 Replies View RelatedThe relevant details of my setup are:
Samsung R522 laptop
Realtek RTL8192E wireless network controller (PCI)
Fedora 12, kernel 2.6.32.9-70.fc12.i686 (automatically updated using software update)
My problem is that my wireless card has never worked - basically there aren't any widely available linux drivers, and there are many threads on getting the RTL8192E to work on many different forums, e.g. here, but none specifically for Fedora, so I think that this thread could potentially guide many more users. FYI, my hardwired network connection works perfectly.
Fantastically however, by emailing Realtek support, they'll send you their Linux driver, which most people have claimed works perfectly (although why they haven't just put it on their website is beyond me). SO, I've got a Linux driver for my wireless card. When Realtek emailed me to send me the driver, they said to just 'cd' into the driver directory, then do
su
make clean
make
make install
reboot
./wlan0up or ./wlan1up
OK, so I tried to do this and get the following error:
make: *** /lib/modules/2.6.32.9-70.fc12.i686/build: No such file or directory. Stop.
make: *** [all] Error 2
I don't know enough about linux to understand this error. I really don't want to have to recompile my kernel, and I hope there is some way to install this driver with not too much hassle. How to overcome this error, and install my wireless driver so I can get wireless network access on my Fedora 12 operating system. I've found Fedora 12 really easy to use so far, but this is proving quite hard!
This is the output of 'ls -lh' in the folder which seems to be causing the error, namely /lib/modules/2.6.32.9-70.fc12.i686/
total 3.1M
lrwxrwxrwx 1 root root 46 2010-03-16 22:53 build -> ../../../usr/src/kernels/2.6.32.9-70.fc12.i686
drwxr-xr-x 2 root root 4.0K 2010-03-03 05:28 extra
drwxr-xr-x 11 root root 4.0K 2010-03-16 22:53 kernel
-rw-r--r-- 1 root root 498K 2010-03-16 22:53 modules.alias .....
Im having problems making my wireless card "Broadcom 4312" work on centos 5.4 X64 , i have installed and built the driver from their official site and inserted its module successfully, but whenever i try to avtivate the interface "called eth1" i get the following
Error for wireless request "Set Encode" (8B2A) :
SET failed on device eth1 ; Invalid argument.
Error for wireless request "Set Encode" (8B2A) :
SET failed on device eth1 ; Invalid argument.
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
I am running the newest Nvidia driver from nvidia.com, version 260.19.44. The built in proprietary Nvidia driver does not work properly.
Recently ubuntu was updated to a newer kernel 2.6.35.27 from 2.6.35.25. Under 2.6.35.25 the driver is working. Under 2.6.35.27 the desktop is not starting, and I can login to a 'console'. After login i try to run startx, and gets some errors. See attached Xorg.0.log.
I have completed building gazebo, and everything was done successfully according to the following link [URL]... bot_Simulation , but when I tried to invoke gazebo using the command "gazebo /usr/local/share/gazebo/worlds/pioneer2dx.world" it returns the following error
[code]...
I am relatively new to linux and am running into a problem. I just got a new laptop and need to configure/install it's wireless driver but am getting an error when running "make". The error is: make[1]: Entering directory `/lib/modules/2.6.37.1-1.2-desktop/build' make[1]: *** No rule to make target `modules'. Stop.
I have scoured these forums and know that others have the same issue (when configuring other drivers/programs). I am sorry if this post is redundant. It sounds like the Makefile is pointing to the wrong directory. I am using opensuse 11.4, have make and gcc installed. My kernel is linux-2.6.37.1-1.2 (I just re-installed the desktop kernel to make sure it was up to date). The driver I am trying to install is located here: AUR (en) - rtl8192ce.
Another forum suggests pointing somewhere in the /usr/src/linux-2.6.37.1-1.2 directory instead. Is this correct? Should I be pointing to a folder within this? I am not a programmer but any description about what I am actually putting in this directory and why would be awesome (so I can learn a bit more). Or just helping me solve the problem would be great too.
If I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
View 3 Replies View RelatedI created a USB Live disk and installed Fedora 12 to my Asus EEE 1005HA (12 inch screen). The machine boots fine, but Hardware Graphics acceleration is not working correctly. If I stop X11, and type "Xorg -configure", the Xorg utility recieves a segmentation fault and exits, and the resulting xorg.conf file does not work correctly. The error is "(EE) open /dev/fb0: No such file or directory". All the correct packages are installed, and there is no logical reason why it is failing. The rest of the hardware on the EEE works fine.
View 2 Replies View RelatedI'm trying to install a driver for a Jetway ADPE4S Daughterboard on Ubuntu 10.04 but coming up against some problems. When I use 'make', I get this error: make ARCH=x86_64 CC=cc LD=ld CROSS_COMPILE= V= -C /usr/src/linux-source-2.6.32 M=`pwd` modules make[1]: Entering directory `/usr/src/linux-source-2.6.32'
ERROR: Kernel configuration is invalid. include/linux/autoconf.h or include/config/auto.conf are missing. Run 'make oldconfig && make prepare' on kernel src to fix it. make[1]: *** No rule to make target `code'. Stop. make[1]: Leaving directory `/usr/src/linux-source-2.6.32' make: *** [all] Error 2
Not knowing what to do, I've been playing around with it, and copied the files autoconf.h and auto.conf from a folder '/usr/src/linux-headers-2.6.32-25-generic', but that didn't help, it still says "No rule to make target `code'. Stop."
I am running gnome 3 on ubuntu 11.04, a clean installation from the gNatty version, 32 bit. The machine is a Lenovo t420, with 6GB RAM and a integrated video card.
Everything is running smoothly but not for games. I tried urban terror, Tremulous, Nexuiz, all of the lags from the very beginning as if I was using a machine 5 years ago to run today's video games (ie, takes 10 seconds for a mouse move a show, audio lags, .etc). From my experience it should come from video card driver not installed, but the update manager shows all device works fine (indeed, the screen resolution is 1600X900).
I just installed Linux Mint 9 as a dual boot install with Win XP. Trying to activate wireless network card driver and video driver. Pops up: "You are not authorized to perform this action".How do I get authorized?
Now every time I boot Win XP, the Internet Explorer menu bar is all blacked out and goofy. If I log out and back in it corrects itself. If I reboot it's blacked out again. Re-installed IE8. Still blacks out.Also Firefox in Win XP crashes expectantly. It has NEVER crashed on me previously.
I installed Debian recently, and everything seems to be working fine, except some video games are unusually slow compared to what they would normally be. Tremulous, for example, worked reasonably fine on this computer with Windows XP, but now (Debian) for some reason it's laggy even on the title screen.
Something wrong with my video drivers?
All of the information I know:
The computer is a Dell Dimension 3000
RAM: 256mb? Gnome System Monitor says 247.1mb, SWAP: about 730mb
Processor: Intel Celeron 2.40GHz
HD: 25gb out of a 40gb HD free, and an external 1tb HD with about 920gb free
Debian Release 6.0 (squeeze)
Kernel Linux 2.6.32-5-686
GNOME 2.30.2 (I've tried LXDE also, no noticeable change)
Only linux on the machine.
glxinfo told me this:
Code:
64 GLX Visuals
128 GLXFBConfigs:
lspci told me this:
Code:
I had a working ubuntu 10.10 system two days ago with kernel 2.6.35-24. I have a gtx 460 card so I have the driver from Jockey/Additional Drivers installed.
Two days ago update manager prompted me to install 2.6.35-25. I've never had problems updating kernels so I did. I Rebooted my machine and gdm/gnome no longer starts. I always get stuck on the tty1 screen. I did some troubleshooting and figured out that my current NVidia drivers seems to be messing it up. So I booted into my older kernel (2.6.35-24) and removed my NVidia driver.
I used these steps to switch from nvidia to nouveau:
NvidiaDriverSwitching
I can now boot into my latest kernel (2.6.35-25) but now I'm having problems trying to reinstall the nvidia drivers.
jockey sometimes doesn't list any available drivers. and when it does, it gives me an "System InstallArchive() error" when trying to install.
I tried installing nvidia-current via apt-get and I get these errors:
Code:
Setting up nvidia-current (260.19.06-0ubuntu1) ...
Removing old nvidia-current-260.19.06 DKMS files...
dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified.
dkms.conf: Error! No 'PACKAGE_NAME' directive specified.
dkms.conf: Error! No 'PACKAGE_VERSION' directive specified.
Here is the output of lspci -v on a dell xps laptop I got today:
Network controller: Intel Corporation Device 008a (rev 34)
Subsystem: Intel Corporation Device 5325
Flags: fast devsel, IRQ 17
Memory at f3b00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel modules: iwlagn