Software :: Apache Showing Internal Server Error
Jun 23, 2010
My httpd error_log says the following error while running the htpasswd.pl
[Thu Jun 24 08:25:54 2010] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Thu Jun 24 08:25:54 2010] [notice] Digest: generating secret for digest authentication ...
[Thu Jun 24 08:25:54 2010] [notice] Digest: done
[Thu Jun 24 08:25:54 2010] [notice] Apache/2.2.3 (CentOS) configured -- resuming normal operations
[Thu Jun 24 08:26:01 2010] [error] [client 117.204.119.181] (2)No such file or directory: exec of '/var/www/cgi-bin/htpasswd.pl' failed
[Thu Jun 24 08:26:01 2010] [error] [client 117.204.119.181] Premature end of script headers: htpasswd.pl
Also the apache shows this error in the webpage. Internal Server Error. The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, root@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log.
Apache/2.2.3 (CentOS) Server at 59.93.43.183 Port 8284
I am using the htpasswd.pl script dwoloaded from net. I can run the perl file using the command line and gets the sytax OK message. The contents of te htpasswd file is as follows:
#! /usr/local/bin/perl -T
# htpasswd.cgi by David Efflandt (efflandt@xnet.com) 8/97
# Last update 10/4/99
# Update password file from the web for use with user authentication.
# Stores each line in the format: username:crypted_password .....
View 8 Replies
ADVERTISEMENT
Sep 30, 2015
I installed debian 7 and apache 2.2 with virtualhosts. I'd like to run CGI, but always get internal server error. i tested it with a simple test.cgi file.I got this in apache error log.Wed Sep 30 21:39:02 2015] [error] [client 192.168.0.156] Premature end of script headers: test.cgi
When is switch off "Addhandler cgi-script .cgi" in the config file i see the code. Permissions are 755 on the whole directory. I have checked a2enmod, the modul is loaded (sudo a2enmod cgi)..here are the part of config files :
ScriptAlias /gestioip "/var/www/gestioip"
<Directory "/var/www/gestioip">
AddHandler cgi-script .cgi
AddDefaultCharset utf8
[code]...
View 0 Replies
View Related
Jan 24, 2010
I am upgrading my server and I have a lot of sites. Since I cannot take my server down for a few days, maybe a week until I manage to migrate all the sites to the new machine, I figured I could migrate them one by one. After migrating one, I would somehow tunnel the requests of that name virtual host to my internal machine. When everything is migrated, I would then switch the machines, update ip's and stuff and everything will work just fine.
However I cannot seem to find a way to do this tunneling. is this at all possible? If not, what alternatives do I have?
View 5 Replies
View Related
May 31, 2011
how to disable or modify the email headers showing the internal IP and hostname of the server when using sendmail. I want this removed or change to just a domain name.
View 2 Replies
View Related
Apr 20, 2010
I'm not sure is this is possible or not, but what I would like to do is take my public address mydomain.com and configure a virtual host something.mydomain.com only instead of having the content on the same server I would like it to point to the IP of my virtual machine that is in my private network and display that page publicly. Does anyone know if this is possible, or how to do it? I have done this with port forwards, but would like them both to be on the same port.
View 3 Replies
View Related
Feb 14, 2011
I have builded a svn server using apache before. But recently I can not check out from the svn server,and error code is as follows:
svn: Can't find a temporary directory: Internal error
I have searched in the google,they said no space on the server.But my server have much space.
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 49G 22G 24G 48% /
tmpfs 220M 0 220M 0% /dev/shm
/dev/sdb1 917G 867G 3.8G 100% /mnt/md0
/dev/hda1 151G 129G 15G 91% /mnt/meego
The server is at the /dev/hda1 partition.
View 7 Replies
View Related
Feb 27, 2009
I use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
[code]...
View 1 Replies
View Related
Jan 20, 2011
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
View 3 Replies
View Related
Sep 6, 2011
i'm facing an error 500 internal error and i don't know where to start .... How can i get information about the error in order to fix it ???at /var/log/apache2/error.log i can't find anythingi have virtualmin installed , i searched at/var/log/virtualmin/domainname_error_log but nothing .... where is apache supposed to keep log for 500 errors ?
View 1 Replies
View Related
Sep 15, 2011
I just run Php5handler on suphp, but suddenly i got internal server error (everything ok when i running php5handler on dso) How to fix this problem?
View 1 Replies
View Related
Jul 18, 2010
I did a fresh installation of centos 5.5. I installed KVM. And configured a eth1 for KVM host network and i configured eth0 to be bridged.
When i do service libvirtd reload i get: internal error Bridge generation exceeded max id 256
View 5 Replies
View Related
Sep 23, 2010
I want write a 2-way chat application in the my website, and i have to use the juggernaut plugin. but a recieved an error that " internal server error"
View 1 Replies
View Related
Oct 2, 2010
Running:Fedora 13kernel 2.6.34.7-56.fc13.i686desktop: xfce 4.6.2Problem: I have a 1TB drive (SATA) with 2 partitions. The partitions/volumes don't show on the desktop.The volume names are:MASSIVEBACKUP.
Facts:1. When I login using GNOME, both volumes (MASSIVE & BACKUP) are listed on my desktop2. My /etc/fstab has long since been edited to reflect these drives3. Using XFCE: Although the volumes don't show on the desktop, they are indeed mounted. I can see them when performing a "df -h" as well as when opening "File System" and drilling to /media - they are both there. I can also access the contents of both volumes within "File System" (using Thunar).4. Using XFCE: I can access both volumes via command line5. Using XFCE: External drives are not affected. I have one external USB drive that shows and when I plug my Android phone, it too shows on the desktop.
After some exploring, I installed the following:Oct 01 22:17:29 Installed: xfce4-mount-plugin-0.5.5-4.fc12.i686I then added "Mount Devices" to my panel, but...as you've probably figured out - they're already mounted.
Here is my /etc/fstab:
==========
# /etc/fstab
[code]...
View 1 Replies
View Related
Sep 23, 2010
We're having an issue with HTTP POST file uploads on our two Ubuntu PCs. For some reason, whenever one of our users attempts to submit a file in an HTML form, the request times out, usually with a 500 Internal Server Error message. This problem is not limited to one site, but occurs on all sites that use file uploads. Also, the problem does not appear to be with our network, as a Windows 7 PC on the same network can upload files to the same sites without any difficulties. The problem is not browser-specific; we have tested with Firefox, Epiphany, and Google Chrome and all produce the same results. The issue is relatively new, and was first observed within the last month; before this time, both machines had no problems uploading files.
Does anyone have ANY idea what could be causing this? I've tried a number of things, including rebooting the PCs, rebooting the network, disabling IPv6, etc. I'm not very experienced in Linux system administration, but I can use the terminal and am familiar with some terminal-based diagnostic tools, so if you need any additional info or want me to try something, please let me know! I've exhausted my own computer knowledge with regards to finding a solution to this problem.
View 3 Replies
View Related
Dec 12, 2008
I would like to know when usb inserted, its showing cant mount when i clicked details its showing bad blocks in beginning , and smething in /dev/sd6. Can i knw why usb drive cant be mounted automatically , even if its set to do so, and to cope the error mentioned above
View 1 Replies
View Related
Jan 10, 2011
Our websever, Linux Debian with mysql, apache2, php 5 went down this saturday. Now this monday morning i must find out why this happend. I am loooking for the the correct log files. We know that the server was available by using ping so it is (was) an application failure. We know that the our apache support team had changed the php to improve performance to apc.shm_size=192M (a couple a weeks ago) because couple a weeks ago we got a "Unable to allocate memory for pool" error message. Our server is running on a Vmware Server version 3 as virtual machine with sufficiente CPU and RAM resources. Where and which log files must be checked to avoid future downtimes.
View 2 Replies
View Related
Feb 18, 2009
I would like to redirect a external IP to a internal IP, all done with Apache. Is that possible.
View 4 Replies
View Related
Aug 13, 2011
I have this problem for a month now. Some apache process that appears rather slowly using 100% cpu for each core. Today I watch some logs in apache2, namely other_vhosts_access.log and discover this
server:8181 127.0.0.1 - - [13/Aug/2011:12:34:52 +0200] "OPTIONS * HTTP/1.0" 200 136 "-" "Apache (internal dummy connection)"
On 8181 I have google sitemap generator running but I have it for over a year and it never make any problems.
View 1 Replies
View Related
Aug 11, 2010
I am trying to create my own yum repository in RHEL5 machine. for this i installed http server.
#createrepo /var/www/yum/
my /etc/yum.conf file configuration is:
[rhce1]
name=rhce1
baseurl=url
enable=1
gpgcheck=1
#yum -y install vsftpd
Repository rhce1 is listed more than once in the configuration
Setting up Install Process
Setting up repositories
http://192.168.142.135/yum/repodata/repomd.xml: [Errno 14] HTTP Error 404: Not Found
Trying other mirror.
Error: Cannot open/read repomd.xml file for repository: rhce1
View 4 Replies
View Related
Feb 2, 2011
I configured a svn server with apache. But while checking out it give the error as follows:
PHP Code:
It's on suse 10.
View 3 Replies
View Related
Jan 10, 2011
Our websever, Linux Debian with mysql, apache2, php 5 went down this saturday. Now this monday morning i must find out why this happened. I am looking for the the correct log files. We know that the server was available by using ping so it is (was) an application failure. We know that the our apache support team had changed the php to improve performance to apc.shm_size=192M (a couple a weeks ago) because couple a weeks ago we got a "Unable to allocate memory for pool" error message. Our server is running on a Vmware Server version 3 as virtual machine with sufficient CPU and RAM resources. Where and which log files must be checked to avoid future download times (it is our Company web page!!!!)
View 5 Replies
View Related
Jan 31, 2011
I am in the process of migrating my old server into new Linux new server. As part of the , apache configuraton is one of the process . i have installed http with yum. i added some test dir like /date/test underwhich i created one test.html. When i start apache , it says Starting httpd: Warning: DocumentRoot [/data/test] does not exist.i am not sure about it. I have directory exists. however it shows the error message.
View 3 Replies
View Related
Mar 18, 2010
I run Linux RedHat and want to find out how can I replace the standard Apache 503 error page with my own? This is my configuration in the httpd.conf file for error pages. Can I just edit the HTTP_SERVICE_UNAVAILABLE.html.var in /var/www/error directory and replace the content with my own , or how can I accomplish my goal?
View 3 Replies
View Related
Mar 6, 2011
I currently have an Apache Web Server running on Ubuntu 10.4 and I use a DynDNS service to make them accessible to the outside world via a domain and/or subdomain.
My configs currently look like this:
<VirtualHost *:80>
ServerAdmin <obscured>@<obscured>.com
ServerName <subdomain>.<obscured>.com
ServerAlias <subdomain>
[Code].....
This works fine from access outside of the network and all subdomains resolve to the correct directory.
The problem I am having is with accessing a subdomain over my internal network.
I can access the Web Server using the server's IP address: http://192.168.1.123/ but this always takes me to the same virtual host and I don't know how to distinguish between different virtual hosts (different subdomains).
Ideally I would like to access the same subdomains using http://<subdomain>/ where <subdomain> is the same as the subdomain attached to the external domain name.
View 2 Replies
View Related
Apr 18, 2011
we have a dual server setup: Windows server 2003 and Ubuntu 10.04 with apache installed with all the goodies. This is all virtualized. What I'm wanting to do, is make the new website we've created run on the Ubuntu machine, which it is, and be accessible outside the office. However, by doing this, we forfeit being able to use remote access or web exchange on Windows server 2003.
How can I create a link from the new website on Apache point to the internal server and it work outside of the office?
View 7 Replies
View Related
Jul 21, 2009
I was unable to access my dedicated server for few minutes. I have checked the apache error logs and found below notice:
[notice] caught SIGTERM, shutting down
I have tried to search from Google but could not find much information about this error.
View 2 Replies
View Related
Apr 19, 2011
I have this error log in apache it doesn't seems to affect the system but in 4 o 5 days. I have to restart the server cause its work really slow almost impossible to navigate the web pages hosted on it. This is the last 50 lines apache log
[Sun Apr 17 04:02:28 2011] [notice] Digest: done
[Sun Apr 17 04:02:28 2011] [notice] Apache/2.2.17 (Unix) DAV/2 PHP/5.2.16 configured -- resuming normal operations
[Sun Apr 17 04:02:28 2011] [notice] Graceful restart requested, doing restart
[Sun Apr 17 04:02:28 2011] [notice] Digest: generating secret for digest authentication ...
[Sun Apr 17 04:02:28 2011] [notice] Digest: done
[Sun Apr 17 04:02:28 2011] [notice] Apache/2.2.17 (Unix) DAV/2 PHP/5.2.16 configured -- resuming normal operations .....
I have a dedicated Linux 2.6.18-238.9.1.el5 on i686 CentOS Linux 5.6
Apache version 2.2.17
PHP 5.2.16 (cli) (built: Dec 17 2010 14:09:03)
View 2 Replies
View Related
Feb 22, 2011
I have a need to create a virtual directory in Apache for one of my company's internal websites. I have confirmed that I can create an alias for a local directory: Alias /vdir/ "/usr/share/somefolder/"
So I would get to this virtual directory by going to http://server.domain.com/vdir/. But when I attempt to point it to a shared folder on another server:
Alias /vdir/ "//servername/share/"
or
Alias /vdir/ "//servername/share/somefolder/"
Both return the 404 Not Found error, which I would expect if it is not connecting to the share. I've searched but can't seem to find the correct syntax and I know I am missing something basic. I have searched google and these forums but can't seem to locate the exact syntax. Are there other lines in the config file I need? Permissions should be no problem the shared is EVERYONE has access (for now).
View 7 Replies
View Related
Oct 14, 2010
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
View 7 Replies
View Related
Jun 17, 2010
I am setting a Lucid mail server, and got dspam and mailgraph installed. dspam requires suexec module for apache, but it breaks mailgraph with "500 Internal Server Error":
[Code].....
View 1 Replies
View Related
