In checking after upgrading with Preupgrade fromFC14 to FC15 here I noticed te yuom seems to show the wrong repos. How do I correct this?
yum clean all
Loaded plugins: downloadonly, fastestmirror, refresh-packagekit, security
Cleaning repos: adobe-linux-i386 fedora updates
Cleaning up Everything
[code].....
I have used preupgrade to moved from fc14 to fc15. With fc14 I had my two usb 3.0 ports working. However, with fc15 my usb 3.0 ports are disabled. I have read the instruction at the common fc15 bugs doc and removed the kernel parameter xhci.enable=1 and also erased the file /etc/pm/config.d/xhci. Still the usb 3.0 ports are not working. I am using kernel 2.6.38.6-26.rc1.fc15.x86_64. I cannot use the 2.6.38.6-27.fc15.x86_64 since there no nvidia drivers for it.
View 5 Replies View RelatedAfter doing an upgrade from FC14 to FC15, I then updated the packages by doing:
yum update yum
yum clean all
yum --releasever=15 --disableplugin=presto distro-sync
I then get the following voluminous list of issues (148 pre-existing rpmdb problems). I've done an rpm --rebuilddb but no help.
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
libclutter-gtk-0.10.so.0()(64bit) is needed by gthumb-2.12.3-2.fc15.x86_64
Please report this error in [URL]
Found 148 pre-existing rpmdb problem(s), 'yum check' output follows:
ImageMagick-c++-6.6.4.1-15.fc14.x86_64 has missing requires of ImageMagick = ('0', '6.6.4.1', '15.fc14')
akonadi-1.5.3-1.fc14.x86_64 has missing requires of libboost_program_options-mt.so.1.44.0()(64bit)
alchemist-1.0.37-8.fc12.x86_64 has missing requires of python(abi) = ('0', '2.6', None) .....
Your transaction was saved, rerun it with: yum load-transaction /tmp/yum_save_tx-2011-05-27-10-30qO4br9.yumtx
Well, it appears that downloading and installing libclutter-gtk-0.10.so.0 seemed to fix all the subsequent yum error messages, and I was able to install all the packages.
Dell Studio 1555 (Wireless WLAN 1397 Half MiniCard (4312bg)) I'd tried
Code:
# akmods --force
5.100.82.38-1-for-2.6.38.6-27.fc15.i686.PAE.failed.log is attached. How to build akmods?
Just upgraded from FC14 to FC15 but YUM is bust, I get the errors of: Could not retrieve mirrorlist... Tried checking the my fedora.repo and fedora-updates.repo and they are all fine and even added in entries into my host file but I still getting the error, am I missing something simple?
View 10 Replies View RelatedI have just upgraded my Lenovo T61 from FC14 to FC15. Under FC14, I had the system set up to hibernate when the lid was closed. When I opened the lid, the system would automatically come out of hibernation in just a few seconds and I would be back to where I was.
Under FC15, I have also set it to hibernate when the lid closes. When I open the lid, nothing happens until I tap the power button, and then it comes out of hibernation via some kind of reboot: I see the Lenovo splash screen, then the machine beeps and goes into a wakeup routine, which takes much longer than it did under FC14.
I have work through fedora project guides and got these messages beneath.
[code]...
i have just upgraded from f14 to f15 using preupgrade. i am now still waiting for the first boot to finish. the screen is stuck for more than an hour and the last line written was:
Started LSB: Start up the OpenSSH server daemon. and there is a blinking cursor.
Trying to set up a LAN with an FC14 laptop, FC15 PC and a Windows machine running XP. I have SAMBA installed on both FC machines, but neither of them can see shares on each other or the XP machine. I can ping between all of them. The Windows machine sees all of the SAMBA shares.
When I attempt to Connect to Server under Places on the FC15 PC, I do not have a Windows share option to choose from as I do on the laptop, suggesting smbclient isn't configured correctly on that machine. SMB, NMB and WINBIND are installed and activated on startup on both FC machines. Although I have the Windows share option on the FC14 laptop, it will only connect with the IP address.
Firewalls and SELinux on both machines are disabled. Here are some configuration details:
rpm -qa | grep samba
samba-3.5.8-68.fc15.1.x86_64
samba-winbind-3.5.8-68.fc15.1.x86_64
samba-swat-3.5.8-68.fc15.1.x86_64
system-config-samba-docs-1.0.9-2.fc15.noarch
samba-winbind-clients-3.5.8-68.fc15.1.x86_64
[Code]...
We are running clamav on 9.10 (with MailScanner)... I upgrade our clam av from respiratory today and it is still showing old version.. When i do freshclam i get this: Local version: 0.95.3 Recommended version: 0.96
[Code]////
Is there 0.96 available from respiratory? Or i have to install it manually from .deb package?
I have a few questions about running virtualbox.
1. what is the difference between the repo version and the sun .rpm version?
2. will usb, printer, etc. be available to the guest os?
3. Will my computer be able to handle running 2 os? after upgrade I will have a p4, 1g ram (333 ddr), and a 250g hard drdive.
IMy goal is to install WinXP and to help test new version of openSUSE with openbox.
I tried installing the VBOX additions. But after running the VBoxLinuxAdditions.run file, building of the kernel modules failed. It gave following message: The headers of the currently running kernel were not found. If the current compilation fails then probably this could be the reason. The missing package can be probably installed with yum install kernel-devel-2.6.40.4-5.fc15.i686.
But when I tried installing the above kernel headers and devel package, it says no such package were found.kernel is 2.6.40.4-5.fc15.i686 but the kernel headers are not available for this version. They are available for previous versions i.e 2.6.40.3-0.fc15.i686.should I downgrade my kernel version (if it's possible) or is there any way things can work out. I have enabled 3D accelaration and given the memory of 128 MB for display. The memory for Virtual Box is 1 GB and hard Disk is 8 GB. The host system is windows 7.
In .conkyrc i am using
Code:
${hwmon temp 1} �C
to show cpu temp but this temp is different from the temp in system monitor indicator which i think is the correct one...so what is the proper code to use in conky to show a proper cpu tem?
Sensors detect:
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
[code].....
I just setup Fedora 15 on my laptop and my wireless card is showing up incorrectly and thus not working. I have a Intel Pro/Wireless 3945 but when I do a lspci it shows up as at Atheros AR5008.
View 2 Replies View RelatedI have a fedora 11 with kernel package: kernel-PAE-2.6.29.6-217.2.3.fc11.i686
I would like to install the devel package for this kernel version, but I can't find it, because in the fedora repo there is only the original kernel (2.6.29.4....) and in the updates repo there is only the newest kernel package (2.6.30....)
Where can I find the packages which are between the fedora and update repos' versions?
Trying the various settings (and noticing ubuntu gnome users recently had the same exact OPPOSITE problem -- they can't SHOW hidden files in dolphin) to hide my hidden files in dolphin is not working. The settings are saved OK, but those damn (ending in tilde, ie "~") files do NOT ever hide! I even see the correct little green recycling symbol on them, indicating they're identified as such, but no actual hiding goes on..
Nautilus, which I've used before (but have grown tired of, and was looking forward to dolphin), also has a weird issue that seems to have appeared with FC13 (I'd been using FC12 'til now mostly because of this) - there's no way (AFAIK) to tell it to show the location; to see it, you have to click Go->Location each time. Previously I could set it to print out the whole file or server path and it would stay that way when I opened new windows.. This is on fresh install & update.. kernel is 2.6.35.11-83.fc14.x86_64.
I am using ubuntu Version 10.10. I always apply all important security updates and recommended updates. When I checked the version of my software using the system->"About ubuntu" drop down, it tells me that I am using version 11.04 which "was" released on April 2011.
View 4 Replies View RelatedUpgraded from FC14 X64 to FC15 X64 yesterday. I've used gnome2 forever, its worked very well for me.My workstation has 4 displays driven by two nvidia cards. One with dual dvi outputs, the other with one dvi one vga. I use the proprietary nvidia driver, NOT nouveau. Each card ties its displays together with twinview, and then xinerama spans across the who cards. This worked splendidly on gnome2, WITHOUT compiz. I used to use compiz when i had two displays so that I could have nice wobbly windows and transparencies, all very nice, but the extra area of the 4 displays was much more important to me. See, xinerama breaks compiz.
When i upgraded from FC14 to 15, my displays went amok, i ended up having to upgrade my nvidia driver, an then couldnt get things working in gnome 3. Finally i fell back to kde, kde4, and lxde both work just as gnome 2 did with my 4 displays. Gnome 3 with Gnome-shell fails spectacularly. Even if I fall back to two displays on one card, its wonky, things dont display properly, and the overview sometimes breaks such that it wont even come up anymore. Gnome3 without gnome-shell also does not work, in fact, i cant even get into gnome, it gives me some error and logs me out when all 4 monitors are enabled, and with only 2, it works, but.. well.. I want my 4 displays!I'm almost certain that compiz is to blame. Gnome's "Fail safe" uses compiz, and i'm betting the compiz isnt working on my 4 displays, causing said error and logout. I have no idea what the heck gnome-shell is doing. It actually displays on two monitors, while the other two are black. The mouse is able to display on all 4, i'm unable to interact with the displays which show gnome, but the displays which are black, seem to respond to my clicks, but they respond on the two montiros which display gnome. Very strange.
I upgraded Sunday evening from FC14 to FC15 using the yum preupgrade method. Services such as httpd, vsftpd, sshd, named and even the VNC server are all running. I can connect via VNC client and get a downgraded gnome desktop, but from the console, I cannot start X or gnome desktop.I have searched many threads over the last day+ and found many references to problems with nVidia drivers - and I have a nVidia adapter. but I am not sure what is next to do and need a lead.
View 1 Replies View RelatedTrying to do the upgrade through "Software Updates", however because there are no current updates, I cannot click on the "Upgrade" button to begin the upgrade process to FC14.
Is there any other way to do this besides downloading the DVD and installing?
I recently upgraded two servers to F10 from F9 and one of them is having an issue where package-cleanup is showing 13 packages which are incorrectly orphaned (no longer in the repo). Has anyone seen this before and know how to resolve this? Is it simply because the packages are listed in the repo as "fc10" vs "fc9"?
[root@athena ~]# package-cleanup --orphans
Setting up yum
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* updates: mirror.cogentco.com
* fedora: mirror.cogentco.com
[Code]...
Which version of KDM is in the Lucid repository? Also, if using KDM in Lucid, is the following configuration of VTs possible?
VT 1-4 getty
VT 5-7 KDM
VT 8-9 free
VT 10-12 logs
I have installed Catalyst 10.10 to Ubuntu 10.10 using the following methodology:
Code:
wget http://someplace/ati-driver-installer-8.783_RC1-x86.x86_64.run
chmod +x ati-driver-installer-8.783_RC1-x86.x86_64.run
[code]....
Just trying my first live upgrade but hit an issue with not being able to import the GPG key for FC14:
[root@jahama ~]# rpm --import https://fedoraproject.org/static/97A1071F.txt error: https://fedoraproject.org/static/97A1071F.txt: import failed. I downloaded the key to a file and had the same error so I know I haven't mistyped anything. What have I missed and what can I do to resolve it?
after upgrading to FC14, i'm getting this when I run emacs file.sh:
GLib-GIO:ERROR:gdbusconnection.c:2270:initable_init: assertion failed: (connection->initialization_error == NULL)
Fatal error (6)Aborted (core dumped) This only happen when i'm logged in as root, on the Terminal session. As a regular user, or launching emacs from task bar icon don't happen.
Is it possible to check out the log as well when you are checking out a version from some repo. For instance this is a game I like :-
[Code]...
The game is called dawn-rpg and one can find about it at dawn-rpg.sourceforge.net but that's not what I want to talk about. The thing it would be so much more convenient for me if instead of going to the svn mirror or whatever it is and checking out the log, it was local. I know I could do something like this :-
svn log > svnlog150611.txt
This would download the log file and put the contents in some text file I have named as svnlog150611.txt . The problem with this way of doing things is that each time I have to check out I would have to create a new txt file with that date. If there was a way one could check out the log as well when checking out a new version/release it would be nice. Its also possible that this might be already be there and there might be another command to use locally that I am not aware about. In that case, would look forward to people to share the same.
I run zypper up regularly against the 4.3 repo and supposedly the latest stable version is 4.3.5. However, after the latest update I am still showing 4.3.4r2.
View 9 Replies View RelatedI had a FC13 box which I ran a yum update which obviously does updates to the packages installed. My issue is that its tried to upgrade the kernel to FC14 and that has toasted by install. now when the box boots up I get this on the screen.
[ 1.741672] Kernel Panic - not syncin: VFS: unable to mount foot fs on unknown -block(0,0)
[ 1.741715] Pid: 1, comm: swapper Not tainted 2.6.35.12-90.fc.x86_64 #1
[ 1.741754] Call Trace:
[ 1.741789] [<ffffffff81468d6f> panic+0x8b/0x10d
there are a few more lines like te last one. I've tried a rescue disk but no good. is my box toasted for good? I've used a live cd and can still the data on the box, is there any way to resue this situation? or is it run live cd backup the data and do fresh install?
The DST in Chile has changed due to the earthquake. I am using openSuSE 11.2, but my clock is using the pre-earthquake info. I am currently using timezone and timezone-java version 2009u-0.1.1, and I believe there is an updated timezone version 2010u, but it hasn't been uploaded to the official repositories yet. How can I fix my timezone?
View 1 Replies View RelatedI am compiling mesa and it compiles ok but I think it it compiles to the usr/local/lib but I want to replace the system version as I want applications to use my compiled version instead.
How do I do this?