Just trying my first live upgrade but hit an issue with not being able to import the GPG key for FC14:
[root@jahama ~]# rpm --import https://fedoraproject.org/static/97A1071F.txt error: https://fedoraproject.org/static/97A1071F.txt: import failed. I downloaded the key to a file and had the same error so I know I haven't mistyped anything. What have I missed and what can I do to resolve it?
after upgrading to FC14, i'm getting this when I run emacs file.sh:
GLib-GIO:ERROR:gdbusconnection.c:2270:initable_init: assertion failed: (connection->initialization_error == NULL)
Fatal error (6)Aborted (core dumped) This only happen when i'm logged in as root, on the Terminal session. As a regular user, or launching emacs from task bar icon don't happen.
I have used preupgrade to moved from fc14 to fc15. With fc14 I had my two usb 3.0 ports working. However, with fc15 my usb 3.0 ports are disabled. I have read the instruction at the common fc15 bugs doc and removed the kernel parameter xhci.enable=1 and also erased the file /etc/pm/config.d/xhci. Still the usb 3.0 ports are not working. I am using kernel 2.6.38.6-26.rc1.fc15.x86_64. I cannot use the 2.6.38.6-27.fc15.x86_64 since there no nvidia drivers for it.
View 5 Replies View RelatedTrying to do the upgrade through "Software Updates", however because there are no current updates, I cannot click on the "Upgrade" button to begin the upgrade process to FC14.
Is there any other way to do this besides downloading the DVD and installing?
I had a FC13 box which I ran a yum update which obviously does updates to the packages installed. My issue is that its tried to upgrade the kernel to FC14 and that has toasted by install. now when the box boots up I get this on the screen.
[ 1.741672] Kernel Panic - not syncin: VFS: unable to mount foot fs on unknown -block(0,0)
[ 1.741715] Pid: 1, comm: swapper Not tainted 2.6.35.12-90.fc.x86_64 #1
[ 1.741754] Call Trace:
[ 1.741789] [<ffffffff81468d6f> panic+0x8b/0x10d
there are a few more lines like te last one. I've tried a rescue disk but no good. is my box toasted for good? I've used a live cd and can still the data on the box, is there any way to resue this situation? or is it run live cd backup the data and do fresh install?
After doing an upgrade from FC14 to FC15, I then updated the packages by doing:
yum update yum
yum clean all
yum --releasever=15 --disableplugin=presto distro-sync
I then get the following voluminous list of issues (148 pre-existing rpmdb problems). I've done an rpm --rebuilddb but no help.
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
libclutter-gtk-0.10.so.0()(64bit) is needed by gthumb-2.12.3-2.fc15.x86_64
Please report this error in [URL]
Found 148 pre-existing rpmdb problem(s), 'yum check' output follows:
ImageMagick-c++-6.6.4.1-15.fc14.x86_64 has missing requires of ImageMagick = ('0', '6.6.4.1', '15.fc14')
akonadi-1.5.3-1.fc14.x86_64 has missing requires of libboost_program_options-mt.so.1.44.0()(64bit)
alchemist-1.0.37-8.fc12.x86_64 has missing requires of python(abi) = ('0', '2.6', None) .....
Your transaction was saved, rerun it with: yum load-transaction /tmp/yum_save_tx-2011-05-27-10-30qO4br9.yumtx
Well, it appears that downloading and installing libclutter-gtk-0.10.so.0 seemed to fix all the subsequent yum error messages, and I was able to install all the packages.
Dell Studio 1555 (Wireless WLAN 1397 Half MiniCard (4312bg)) I'd tried
Code:
# akmods --force
5.100.82.38-1-for-2.6.38.6-27.fc15.i686.PAE.failed.log is attached. How to build akmods?
My system with kernel-2.6.35.10-74.fc14.x86_64, NVIDIA 3800 + Samsung 2233 and 3Dvision kit works fine, but upon upgrading to kernel-2.6.35.13-92.fc14.x86_64 the system won't go past the blue->white bar along the screen. The modprobe.d directory has the file blacklisting nouveau and there is the grub entry rdblacklist=nouveau, but do I need to re-run the nvidia installer. If so I think I need to reset the init level to stop X11 trying to load. and will I need to keep doing this everytime I upgrade the kernel if I have nvidia drivers installed?
Leigh123linux desired code output is below
***
abrt-addon-kerneloops-1.1.18-1.fc14.x86_64
kernel-2.6.35.10-74.fc14.x86_64
kernel-2.6.35.13-91.fc14.x86_64
[Code]....
as a normal user when I click logout from a KDE session nothing happens and I can't re-launch logout again, shutdown is doing the same.I have just upgraded to fc14 from fc13 yesterday tried to delete .kde folder and it has not been succesful tried to create another user and log to kde session and the new user also failed to logout or shutdown Root user is able to logout and shutdown I have no probs on GNOME for root or users.
View 1 Replies View RelatedAfter upgrade my fedora to FC14, my evolution stops to fetch mail from my pop accounts and even for my imap accounts.
Bellow the output of [fred_m@madeira ~]$ evolution --debug=evo.debug.txt
Code:
The error reported when evolution try to fetch emails is:
Code:
I already tried this options, but no success.
yum reinstall evolution*
and
yum downgrade evolution*
I just upgraded from FC 13 to FC 14. I run an ssh server on a port in the 3000s (call it 3xxx, to protect the innocent). When I try to start sshd with the "Port 3xxx" option in sshd_conf, I get the following error in /var/log/secure
sshd[5104]: error: Bind to port 3xxx on 0.0.0.0 failed: Permission denied.
sshd[5104]: error: Bind to port 3xxx on : : failed: Permission denied.
I did not use to have this problem in FC 13. how I can give sshd the necessary permissions now?
Just upgraded from FC14 to FC15 but YUM is bust, I get the errors of: Could not retrieve mirrorlist... Tried checking the my fedora.repo and fedora-updates.repo and they are all fine and even added in entries into my host file but I still getting the error, am I missing something simple?
View 10 Replies View RelatedIn checking after upgrading with Preupgrade fromFC14 to FC15 here I noticed te yuom seems to show the wrong repos. How do I correct this?
yum clean all
Loaded plugins: downloadonly, fastestmirror, refresh-packagekit, security
Cleaning repos: adobe-linux-i386 fedora updates
Cleaning up Everything
[code].....
I am running RHEL5 and I have just upgraded my RPM software manager from RPM version 4.4.2 to RPM version 4.9.0 (the latest version) by doing a clean install of v4.9.0. The version 4.4.2 came with the RHEL5 and at the moment is very old so I cannot install certain newer rpms. I followed the INSTALL instructions that comes with the tarball for V4.9.0. The problem is the new install (i.e. RPM V4.9.0) has no knowledge of my old RPM manager i.e. V4.4.2, hence it does not know of the rpm packages installed on my system.
I think the problem is that the V4.9.0 is a new install rather than an upgrade (There are no instructions on how to perform a 'real' upgrade). I have tried to rebuild the rpmdb for v4.9.0 but that does not help and I have no idea how to import the data from v4.4.2 database to v4.9.0 database. My question is, how do I import the database from RPM manager V4.2.2 into RPM manager V4.9.0 or how do I 'upgrade'properly from V4.4.2 to V4.9.0. I have trawled the internet for some guides but there does not seem to be anything regarding this.
Wanted to double check if I've done something stupid in my update, or whether this is a known issue.
$ python
>>> import wx
Traceback (most recent call last):
File "<stdin>", line 1, in ?
[code]....
after I had to rebuild the rpmdb because of some errors within it, i can't import any gpg-keys with the command "rpm --import". All I get is this:
[Code]....
I just wanted to upgrade to fedora 11 from the current version 5 with the of a live cd.I dont want to loose the previous configuration files. upgrade everything except the / directory. How do you do that? I also have a retarded WINXP partition on the same drive which I dont wanna loose.
View 9 Replies View RelatedI think there is a bug with gmixer on fc14 using lxde. Every time I log out and log back on gmixer spawns another process. So if I log out and log back on 6 times I will have 6 gmixer processes running concurrently.
View 3 Replies View Relatedati proprietry fglrx driver in fedora 14, anyone know if this exists or where to get it? or is there some other way to get some 3d acceleration on fedora 14 with out it?
View 6 Replies View RelatedI am new to this O/S. I have tried Mint and Ubuntu. There are some problems I would like to work out by myself before I take short-cuts, as if.I have tried to install codecs for my o/s media player and get a reply from computer "xxxx does not have sudoer rights, you will be reported."I tried to get sudoer rights and was told I had to have administrator rights first. To get administrator rights I needed sudoer rights. I decided to come to forums to ask and this is my first post.
Is there a danger in getting administrative rights? If so, I would still rather like to face the danger than not be able to play music. And how do I get real superuser rights? My root account is localhost.localdomain and my login account is XXXX. I would have access to everything rather than have a warning that the administration is receiving reports of my activity. Might anyone have help?
I'd like to update my version of gsl to 1.15 (it has improved integration routines) Downloading & compiling worked, but I'm hesitant to overwrite the default packages with ones I compiled myself since there's a lot of compilation flags etc I may be getting wrong. On top of that, I need the header files from gsl-devel too to link against, and I'm not sure how that works. (Where to place them etc)Is there any way to use these packages to install on fc14?Should I just compile it myself?And what about the devel headers?
View 2 Replies View RelatedI have some problems reading dvds using either xine or totem
Here's the output from running xine dvd://
This is xine (X11 gui) - a free video player v0.99.6.
(c) 2000-2007 The xine Team.
libdvdread: Using libdvdcss version 1.2.10 for DVD access
libdvdread: Attempting to use device /dev/mapper/vg_inga-lv_root mounted on / for CSS authentication
[Code]....
I know that this issue has been addressed on the forum before, but I haven't found any threads that solves my problem.
when compiling stlplus (02-08), FC14, i am getting these errors:
[Code]....
Whenever I insert a USB drive (or plug in my Motorola Droid to copy files to it), a window pops up that says 'Unable to Mount File System'. Not Authorized. The drive shows up under the Places menu, but if I click on it I just keep getting the same error.
View 14 Replies View RelatedI tried installing VMWare-player using
Code:
#./VMware-Player-3.1.2-301548.i386.bundle
It got installed successfully, but while running it said gcc not found. so i installed gcc by
Code:
#yum install gcc
[Code]....
I've got the Gnome front end installed and everything runs terribly slow. Now that I think about it, I'm not sure if its a problem with sdlmame or the Gnome front end.Is anyone successfully running MAME under FC14? If so, what did you have to do? Did you have a similar experience to mine? How did you correct it?
View 2 Replies View RelatedIs this howto which is based on FC5 still applicable to FC14?[URL]...
View 2 Replies View RelatedWhenever I resume my laptop, there is no audio... the only way to make it work is to restart my comp ...I am using fedora 14 on Thinkpad x201 .
View 1 Replies View RelatedI have coriander-2.0.0-1.fc14.i686 installed and it does n t work anymore as it used to with my IIDC compliant ieee1394 camera.
I understood that raw1394 and video1394 modules are now deprecated. So firewire_ohci and firewire_core are loaded when I plug in the camera. There is no more /dev/raw1394 and /dev/video-0 streams, but now there are /dev/fw0 and /dev/fw1.
When I run Coriander, I receive: Erreur de segmentation (core dumped)
If I create the following link: ln -s /dev/fw1 /dev/raw1394
[Code]....
where you only get offered the kernel-headers for 2.6.35.11-83 by yum but not the kernel or the kernel-devel? I tried yum clean all and both pointing to the baseurl and mirrorlist and it does the same thing for both. Oddly my other laptop with F14 in the wireless cafe showed all three packages were available.
View 2 Replies View Related