Fedora :: FC14 To FC15 Upgrade - USB 3.0 Not Working
May 29, 2011
I have used preupgrade to moved from fc14 to fc15. With fc14 I had my two usb 3.0 ports working. However, with fc15 my usb 3.0 ports are disabled. I have read the instruction at the common fc15 bugs doc and removed the kernel parameter xhci.enable=1 and also erased the file /etc/pm/config.d/xhci. Still the usb 3.0 ports are not working. I am using kernel 2.6.38.6-26.rc1.fc15.x86_64. I cannot use the 2.6.38.6-27.fc15.x86_64 since there no nvidia drivers for it.
View 5 Replies
ADVERTISEMENT
May 27, 2011
After doing an upgrade from FC14 to FC15, I then updated the packages by doing:
yum update yum
yum clean all
yum --releasever=15 --disableplugin=presto distro-sync
I then get the following voluminous list of issues (148 pre-existing rpmdb problems). I've done an rpm --rebuilddb but no help.
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
libclutter-gtk-0.10.so.0()(64bit) is needed by gthumb-2.12.3-2.fc15.x86_64
Please report this error in [URL]
Found 148 pre-existing rpmdb problem(s), 'yum check' output follows:
ImageMagick-c++-6.6.4.1-15.fc14.x86_64 has missing requires of ImageMagick = ('0', '6.6.4.1', '15.fc14')
akonadi-1.5.3-1.fc14.x86_64 has missing requires of libboost_program_options-mt.so.1.44.0()(64bit)
alchemist-1.0.37-8.fc12.x86_64 has missing requires of python(abi) = ('0', '2.6', None) .....
Your transaction was saved, rerun it with: yum load-transaction /tmp/yum_save_tx-2011-05-27-10-30qO4br9.yumtx
Well, it appears that downloading and installing libclutter-gtk-0.10.so.0 seemed to fix all the subsequent yum error messages, and I was able to install all the packages.
View 4 Replies
View Related
Jun 4, 2011
Dell Studio 1555 (Wireless WLAN 1397 Half MiniCard (4312bg)) I'd tried
Code:
# akmods --force
5.100.82.38-1-for-2.6.38.6-27.fc15.i686.PAE.failed.log is attached. How to build akmods?
View 3 Replies
View Related
Jun 21, 2011
Just upgraded from FC14 to FC15 but YUM is bust, I get the errors of: Could not retrieve mirrorlist... Tried checking the my fedora.repo and fedora-updates.repo and they are all fine and even added in entries into my host file but I still getting the error, am I missing something simple?
View 10 Replies
View Related
May 30, 2011
In checking after upgrading with Preupgrade fromFC14 to FC15 here I noticed te yuom seems to show the wrong repos. How do I correct this?
yum clean all
Loaded plugins: downloadonly, fastestmirror, refresh-packagekit, security
Cleaning repos: adobe-linux-i386 fedora updates
Cleaning up Everything
[code].....
View 2 Replies
View Related
Aug 31, 2011
I have just upgraded my Lenovo T61 from FC14 to FC15. Under FC14, I had the system set up to hibernate when the lid was closed. When I opened the lid, the system would automatically come out of hibernation in just a few seconds and I would be back to where I was.
Under FC15, I have also set it to hibernate when the lid closes. When I open the lid, nothing happens until I tap the power button, and then it comes out of hibernation via some kind of reboot: I see the Lenovo splash screen, then the machine beeps and goes into a wakeup routine, which takes much longer than it did under FC14.
View 2 Replies
View Related
Apr 25, 2011
I have work through fedora project guides and got these messages beneath.
[code]...
View 4 Replies
View Related
May 27, 2011
i have just upgraded from f14 to f15 using preupgrade. i am now still waiting for the first boot to finish. the screen is stuck for more than an hour and the last line written was:
Started LSB: Start up the OpenSSH server daemon. and there is a blinking cursor.
View 3 Replies
View Related
Jun 27, 2011
Trying to set up a LAN with an FC14 laptop, FC15 PC and a Windows machine running XP. I have SAMBA installed on both FC machines, but neither of them can see shares on each other or the XP machine. I can ping between all of them. The Windows machine sees all of the SAMBA shares.
When I attempt to Connect to Server under Places on the FC15 PC, I do not have a Windows share option to choose from as I do on the laptop, suggesting smbclient isn't configured correctly on that machine. SMB, NMB and WINBIND are installed and activated on startup on both FC machines. Although I have the Windows share option on the FC14 laptop, it will only connect with the IP address.
Firewalls and SELinux on both machines are disabled. Here are some configuration details:
rpm -qa | grep samba
samba-3.5.8-68.fc15.1.x86_64
samba-winbind-3.5.8-68.fc15.1.x86_64
samba-swat-3.5.8-68.fc15.1.x86_64
system-config-samba-docs-1.0.9-2.fc15.noarch
samba-winbind-clients-3.5.8-68.fc15.1.x86_64
[Code]...
View 3 Replies
View Related
May 27, 2011
Upgraded from FC14 X64 to FC15 X64 yesterday. I've used gnome2 forever, its worked very well for me.My workstation has 4 displays driven by two nvidia cards. One with dual dvi outputs, the other with one dvi one vga. I use the proprietary nvidia driver, NOT nouveau. Each card ties its displays together with twinview, and then xinerama spans across the who cards. This worked splendidly on gnome2, WITHOUT compiz. I used to use compiz when i had two displays so that I could have nice wobbly windows and transparencies, all very nice, but the extra area of the 4 displays was much more important to me. See, xinerama breaks compiz.
When i upgraded from FC14 to 15, my displays went amok, i ended up having to upgrade my nvidia driver, an then couldnt get things working in gnome 3. Finally i fell back to kde, kde4, and lxde both work just as gnome 2 did with my 4 displays. Gnome 3 with Gnome-shell fails spectacularly. Even if I fall back to two displays on one card, its wonky, things dont display properly, and the overview sometimes breaks such that it wont even come up anymore. Gnome3 without gnome-shell also does not work, in fact, i cant even get into gnome, it gives me some error and logs me out when all 4 monitors are enabled, and with only 2, it works, but.. well.. I want my 4 displays!I'm almost certain that compiz is to blame. Gnome's "Fail safe" uses compiz, and i'm betting the compiz isnt working on my 4 displays, causing said error and logout. I have no idea what the heck gnome-shell is doing. It actually displays on two monitors, while the other two are black. The mouse is able to display on all 4, i'm unable to interact with the displays which show gnome, but the displays which are black, seem to respond to my clicks, but they respond on the two montiros which display gnome. Very strange.
View 7 Replies
View Related
Jun 21, 2011
I upgraded Sunday evening from FC14 to FC15 using the yum preupgrade method. Services such as httpd, vsftpd, sshd, named and even the VNC server are all running. I can connect via VNC client and get a downgraded gnome desktop, but from the console, I cannot start X or gnome desktop.I have searched many threads over the last day+ and found many references to problems with nVidia drivers - and I have a nVidia adapter. but I am not sure what is next to do and need a lead.
View 1 Replies
View Related
Aug 5, 2011
I have been troubleshooting for some time but do not manage to get my sound working on FC15. I want to use the integrated sound from my motherboard ASRock 890GX Extreme3 and I am testing it with the headphones on the front output. I noticed I can get sound from the motherboard output on the back (front audio should be wired as well though, it does work in Windows). My ALSA information can be found at: [URL]
View 5 Replies
View Related
Nov 4, 2010
Just trying my first live upgrade but hit an issue with not being able to import the GPG key for FC14:
[root@jahama ~]# rpm --import https://fedoraproject.org/static/97A1071F.txt error: https://fedoraproject.org/static/97A1071F.txt: import failed. I downloaded the key to a file and had the same error so I know I haven't mistyped anything. What have I missed and what can I do to resolve it?
View 2 Replies
View Related
Nov 25, 2010
after upgrading to FC14, i'm getting this when I run emacs file.sh:
GLib-GIO:ERROR:gdbusconnection.c:2270:initable_init: assertion failed: (connection->initialization_error == NULL)
Fatal error (6)Aborted (core dumped) This only happen when i'm logged in as root, on the Terminal session. As a regular user, or launching emacs from task bar icon don't happen.
View 1 Replies
View Related
Jun 27, 2011
Trying to do the upgrade through "Software Updates", however because there are no current updates, I cannot click on the "Upgrade" button to begin the upgrade process to FC14.
Is there any other way to do this besides downloading the DVD and installing?
View 8 Replies
View Related
May 9, 2011
I had a FC13 box which I ran a yum update which obviously does updates to the packages installed. My issue is that its tried to upgrade the kernel to FC14 and that has toasted by install. now when the box boots up I get this on the screen.
[ 1.741672] Kernel Panic - not syncin: VFS: unable to mount foot fs on unknown -block(0,0)
[ 1.741715] Pid: 1, comm: swapper Not tainted 2.6.35.12-90.fc.x86_64 #1
[ 1.741754] Call Trace:
[ 1.741789] [<ffffffff81468d6f> panic+0x8b/0x10d
there are a few more lines like te last one. I've tried a rescue disk but no good. is my box toasted for good? I've used a live cd and can still the data on the box, is there any way to resue this situation? or is it run live cd backup the data and do fresh install?
View 4 Replies
View Related
Jun 17, 2011
My system with kernel-2.6.35.10-74.fc14.x86_64, NVIDIA 3800 + Samsung 2233 and 3Dvision kit works fine, but upon upgrading to kernel-2.6.35.13-92.fc14.x86_64 the system won't go past the blue->white bar along the screen. The modprobe.d directory has the file blacklisting nouveau and there is the grub entry rdblacklist=nouveau, but do I need to re-run the nvidia installer. If so I think I need to reset the init level to stop X11 trying to load. and will I need to keep doing this everytime I upgrade the kernel if I have nvidia drivers installed?
Leigh123linux desired code output is below
***
abrt-addon-kerneloops-1.1.18-1.fc14.x86_64
kernel-2.6.35.10-74.fc14.x86_64
kernel-2.6.35.13-91.fc14.x86_64
[Code]....
View 2 Replies
View Related
Dec 23, 2010
as a normal user when I click logout from a KDE session nothing happens and I can't re-launch logout again, shutdown is doing the same.I have just upgraded to fc14 from fc13 yesterday tried to delete .kde folder and it has not been succesful tried to create another user and log to kde session and the new user also failed to logout or shutdown Root user is able to logout and shutdown I have no probs on GNOME for root or users.
View 1 Replies
View Related
May 14, 2011
I'm trying to get dial up working using wvdial, kppp or system-config-network. Whatever I try, it shows "no modem found." I'm using a US Robotics serial modem that's worked with other linux set-ups, so I know it's not the modem. What's the command to find a serial modem in the terminal? lspci doesn't show it.
And any info on getting any of these to work..especially system-config-network! Had it working with linux Mint's LXDE on an older Thinkpad, but something happened after an up date (kept saying that an IBM system was detected and refusing to load a module when it booted.) After update, didn't show that warning, perhaps loading the module.
Old Thinkpad hasn't loaded an operating system since! Won't even load gparted so I can get something else on it.....so I'm sticking with Fedora until I can figure it out. Got another old Thinkpad, don't want to repeat the same mistake. Guessing that it's a debian problem, as Mint's never broken anything before.
View 14 Replies
View Related
Nov 8, 2010
After upgrade my fedora to FC14, my evolution stops to fetch mail from my pop accounts and even for my imap accounts.
Bellow the output of [fred_m@madeira ~]$ evolution --debug=evo.debug.txt
Code:
The error reported when evolution try to fetch emails is:
Code:
I already tried this options, but no success.
yum reinstall evolution*
and
yum downgrade evolution*
View 1 Replies
View Related
Feb 5, 2011
I just upgraded from FC 13 to FC 14. I run an ssh server on a port in the 3000s (call it 3xxx, to protect the innocent). When I try to start sshd with the "Port 3xxx" option in sshd_conf, I get the following error in /var/log/secure
sshd[5104]: error: Bind to port 3xxx on 0.0.0.0 failed: Permission denied.
sshd[5104]: error: Bind to port 3xxx on : : failed: Permission denied.
I did not use to have this problem in FC 13. how I can give sshd the necessary permissions now?
View 2 Replies
View Related
Nov 6, 2010
A reinstall (several) of FC14x86_64. Epson flatbed scanner V350 that worked well in FC13 is not being recognised /no coms
USB connection
Apps: epson driver, san xsane, simple scan, iscan (avasys.jp)
[root@richard-g8jvm Downloads]# lsusb
Bus 003 Device 003: ID 0d8c:0201 C-Media Electronics, Inc. CM6501
Bus 003 Device 002: ID 0a5c:2046 Broadcom Corp. Bluetooth Device
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 014: ID 04b8:012f Seiko Epson Corp. Perfection V350 (GT-F700)
Bus 001 Device 004: ID 04b8:0007 Seiko Epson Corp. Printer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
iscan reports
could not send command to scanner
check scanner status
View 1 Replies
View Related
Jul 4, 2011
Recently installed FC15 XFCE on my new hard drive in my laptop, bring it home from work and it wont boot up.
Only changes I made at work were removing the standard package manager, replacing it with yumex, and slightly changing the panels to more suit how I like to work. Other than that just a little browsing the web on work's wireless connection.
Now it will not boot at all. Pressing Ctrl+Alt+2 and the last command I see is "Started SYSV: Late init script for live image.."
Tried booting into the original kernel (rather than the updated one from when I first installed) and the writing is smaller so I can see an earlier message where it failed a process. This is relating to akmod_nvidia but I installed that a couple of days ago and have restarted a few times since without problems before.
"Starting LSB: Builds and install new kmods from akmod package failed, see 'systemct1 status akmods'service' for more details"
I do not even get a command like where I can type with Ctrl+Alt+2 to try running anything.
I tried adding "runlevel=3" to the end of the kernel line in Grub. Is that the correct way to try and force into command line?
View 2 Replies
View Related
Jun 27, 2011
I have just upgraded my FC14 laptop to FC15 and although tsclient was 'transferred', it would not run and so I did not have a working graphical interface to make RDP connections.
As the app wasn't running, I removed it and then discovered that tsclient is listed as 'orphaned' and 'deprecated' in the repos, with the latest working version being for FC13.
Is there really no GUI interface for using RDP in Fedora 15 - I can't believe I have to drop down to a command prompt to run rdesktop!?
View 2 Replies
View Related
Jun 28, 2011
I'm going to remove Gnome3 from FC15 and, possibly, install KDE. I'm not sure about the options I have for it:I saw I can remove just the gnome-shell package. This makes me wonder if it is possible to replace the gnome-shell functionality with a gnome-2 equivalent, getting some of the gnome2 back how much of gnome-related packages can I remove? For example, is it advisable to remove gdm in favour of kdm? Are there gtk/gnome programs that are "better" than kde equivalents and are thus best left untouched, along with their dependencies? finally, somewhat unrelated, do you know good tutorials for gnome2.X expatriates to learn modern kde?
View 14 Replies
View Related
Jul 8, 2011
I recently installed FC15. When I try to execute a binary file, it shows permission denied message even when I login with the root user through "su -" command. It also give me the same message when I try to run a python script. How can I execute binaries in FC15?
View 1 Replies
View Related
Jul 30, 2011
where can i put the request for the [ FC15] build of:
alien [URL]
dependencies for po-debconf:
Code:
perl(Debconf::AutoSelect) is needed by po-debconf-1.0.16-5.fc15.noarch
perl(Debconf::Config) is needed by po-debconf-1.0.16-5.fc15.noarch
perl(Debconf::Db) is needed by po-debconf-1.0.16-5.fc15.noarch
perl(Debconf::Template::Transient) is needed by po-debconf-1.0.16-5.fc15.noarch
[Code].....
View 3 Replies
View Related
Aug 15, 2011
I currently have an FC15 KDE, set up as I like it as a media server, and with squeezeboxserver (for Logitechs media system) running fine. But I'd like to set it up as headless - and it presently needs to have a monitor attached. No keyboard or mouse and it will boot to the login screen (so not a BIOS issue). I need to get it to boot without needing a monitor or requiring a graphical log in. I can administer via SSH and Squeezebox server puts up a webpage. FC15 doesn't use inittab any more, so changing run levels is fraught. I don't want to play with targets without a safety line ...
View 4 Replies
View Related
Sep 6, 2011
I have been trying to compile a package and I am having some difficulties linking to libX11.so. It seems that it reports that XFree is undefined. Is there some work around for this?
View 4 Replies
View Related
May 28, 2011
i just installed fc15 on a virtual machine and since i wanted to learn how to configure it manually, i chose minimal installation. i have referring the deployment guide, now im trying to configure the network interface. what are the steps i have to follow when i install a new network interface manually? no GUI tools are available here because of the minimal installation. im stucked
View 2 Replies
View Related
