Software :: Xclock Running From Start Script Doesn't Display Correctly?
Feb 21, 2011
I recently dist-upgraded from Debian 5 to 6 (squeeze). Since then, the xclock I run from my window manager's start script isn't displaying correctly (it displays only a "0"). The thing is, if I run the same command in my start script in my terminal, it works just fine, as it has always done...
I use this rather "old" X applications because I like my programs simple/not buggy/fast, and it's resulting a rather annoying problem (being that apparently nobody else has it...).
All other programs in my start script (gnome-terminal, emacs, xmodmap, etc) are working with no problems whatsoever.
My window manager: sawfish
Command to run xclock in my start script:
Code:
xclock -digital -brief -geometry -0+0
Attached picture:
Top: xclock initialized by start script
Bottom: xclock initialized by terminal
View 2 Replies
ADVERTISEMENT
May 1, 2009
I have a laptop that doesn't display correctly since installing F10 x86-64. Instead of using the i810 driver, I see the experimental intel driver. I am running on a Dell D630 laptop with the default intel integrated graphics.
Just to note: Running gnome. I tried KDE and I can actually get this to work and display in 1600x1200. I don't want, "well use kde then" to be the solution. Also, in gnome, if I go to the screen resolution option from the menu, the mirron screens is clicked. Even when I detect monitors and unselect the mirror screens and pick the correct resolution, when I click OK, the screen flickers, and I go back to the same screen with the original default values? Wierd.
I got the bright idea to install system-config-display (something like that), which installed fine. I then changed my default resolution to 800x640 just to try it (really want 1600x1200). Well, I decided to reboot. Not the laptop doesn't start, it stops right after loading anaconda, and just won't go any further.
So two questions:
1. What do I need to change to get the laptop to actually boot?
2. How to get the external monitor to display in 1600x1200.
View 1 Replies
View Related
Mar 22, 2011
I'm running Kubuntu and have tested flash video sites with firefox, chromium and rekonq. I have installed all the available packages from Software Management but flash videos still don't display correctly. All get is a small rectangle of video on the bottom left hand side of the video box (which is otherwise grey).
View 4 Replies
View Related
Apr 19, 2010
I just upgraded my computer from Ubuntu 9.10 to 10.04 (beta2) restarted and the splash was screwed i thought meh i can live with it then went into my account switched to tty1(ctrl+alt+F1) and it was the same. got annoyed now asking had anyone else encountered/know how to fix this problem. pictures attached sorry for bad quality took on phone, but that is how it really looks.
View 9 Replies
View Related
Jul 27, 2010
Hostname: Borg
OS: Lucid Lynx
Kernel: 2.6.32-24
Problem:
1. borg > xhost +
2. borg > ssh <anyuser>@<anyhost>
3. anyhost > export DISPLAY:<borg's IP>:0.0
4. xclock
NOTHING HAPPENS!!!! Any ideas? Here is what I have tried thus far.
Efforts:
1. gdmsetup - looked for security tab, doesn't exist
2. installed gdm2setup - still not there
3. looked for gdm.conf - not there
4. when doing ps -ef|grep X - there is a -nolisten tcp "could this be culprit" hmm not sure
5. modified /etc/ssh/ssh_config to Forward X
View 1 Replies
View Related
Dec 26, 2010
I have this problem. Whenever I issue command below,
Code:
ssh -X user@hostA
xclock
[code]....
View 4 Replies
View Related
Jul 23, 2010
I'm having trouble displaying Xwindows programs on a remote machine. If I run "ssh -X newmachine" and I login and then run a program like xclock, I get the error message:
Error: Can't open display: localhost:10.0
If I run the same command to an anothermachine which is running Ubuntu 8.04 it works fine and xclock displays on my localmachine. If I run the command "echo $DISPLAY" on newmachine, I see:
localhost:10.0
Also, I have checked and xauth is installed on newmachine. What setting I have to change on Ubuntu 10.04 to allow remote display of Xwindows programs?
View 4 Replies
View Related
Jan 10, 2010
I have created the following script which runs very well when it is executed alone.This script is to be run by a third party application (Oracle clusterware).The script (when is run by the application) doesn't successfully execute the xclock command. It even doesn't return the $USER variable.Following is what I got:
Code:
#
# Copy of the script
[code]...
View 1 Replies
View Related
Oct 8, 2009
I use kubuntu (8.04) which does not have a root account.
[sudo] password for ts:
However, starting xclock or gvim on root shell on konsole has the "Can't open display" error appears.
Error: Can't open display: localhost:0.0
Press ENTER or type command to continue
View 2 Replies
View Related
Apr 15, 2011
When I do xhost + also it hangs.Without the xclock I am not able to run oracle reports in production for bar code printing as I am not able to start a standalone reports server. Help needed to start xclock and where to look for any help
View 2 Replies
View Related
May 26, 2010
I have recently disabled nautilus from showing up on my desktop. Now I can't seem to start nautilus. Starting it from gnome-terminal doesn't display anything, and it never shows, and it never terminates. The way I disabled nautilus from showing up on my desktop was by following Xmonad/Using xmonad in Gnome - HaskellWiki
View 5 Replies
View Related
Jan 8, 2010
with slackware 13.0 for one user xfce4 hangs and doesn't start..xsession.errors claim it can't open display. It works fine for other users. Also if I access the machine in question as the same user but remotely using remote X (X-terminal on my LAN) it works fine.Sometimes if I wait and count to 30 it comes up but a lot of the features don't work.During the last week have posted this question on the compuserve linux forum and also in the xfce site forum with no solutions.seems there must be something in that user's directory which is hanging it up. I keep the same /home/users directory on a separate partition so when I upgrade for new versions of slackware the /home/users remain the same - I symlink home to that partition so upgrades are somewhat seemless.
View 3 Replies
View Related
Aug 28, 2010
I am having problems with Thunderbird in Ubuntu Lucid. I am not sure since when. It could have been since I upgraded to Lucid from Karmic. When I open Thunderbird, a message pops up that is supposed to ask me for the password. However, it is all blank inside and doesn't display the text. I found that after I click on ALT+TAB a few times, the message displays correctly. This is very strange. Is anyone else having (or had) the same problem? Does anyone have an idea for a fix?I tried uninstalling and then reinstalling but it didn't work out (I didn't "purge" though).
View 4 Replies
View Related
Mar 16, 2011
I'm trying to display my todo.txt file in my Conky, but it won't align correctly. Only the first line of the list is where I want it, the rest is in the default location.Quote:
background yes
update_interval 1
cpu_avg_samples 2
[code]....
View 8 Replies
View Related
Mar 31, 2011
I have a problem with getting the picture to display properly on my HDTV. Using the regular driver (whichever that is) the picture displays flawlessly, but when I'm using the NVIDIA driver it displays really weird. URL...As you can see the top and the right of the picture is missing, and there is a large black bar to the left of it.Since it only does this with the NVIDIA driver I guess the driver is at fault here. The graphics card is a 8400GS and I'm running Xubuntu 10.10. The HDTV has a native resolution of 1366x768, and I've connected to it using HDMI.
I have tried messing around with overscan compensation in nvidia-settings, but it didn't help much.What can I do to fix this?
View 5 Replies
View Related
Jul 18, 2011
I recently installed KDE and began using that instead of Unity (less buggy, IMHO) and it was running smoothly until I began configuring my GTK applications for transition in that. I installed the Oxygen-GTK them from gnome-look.org and set that as my default theme for GTK applications under the KDE appearance preferences.
When I log in, however, GTK applications just use the stock Xorg theme until I run "gnome-appearance-properties" in my terminal.I believe that a fix involving .gtkrc would suffice, but I honestly cannot configure it no matter how hard I try.
View 2 Replies
View Related
Mar 12, 2009
HP TouchSmart IQ500t
NVIDIA GEForce 9300M GS HD
Intel Core 2 Duo Processor T6400
Linux REL 4 64 bit OS
Tried installing latest NVIDIA driver (NVIDIA-Linux-x86_64-180.29-pkg2) from NVIDIA website for this video card, and the display was not appearing correctly. There was a lot of garbage at the top of the monitor. Half of the desktop screen was missing.
View 1 Replies
View Related
Nov 4, 2010
installing a Linux distro on an old mac to make a simple desktop home computer details below.The Scenario: I am trying to breath a couple more years of life into a computer illiterate friend's Mac G4 [POS] computer, it is a paper weight but all he needs is a basic desktop and an web machine and he can't be made to buy a new one unless all other options are exhausted.
The computer: Is a Mac G4 power-PC architecture, 450 MHz, 18 GB HDD, 1024 Mb ram ugly little thing that was gotten for free it currently has mac OS 10.2 [unsupported] and newer OS-X (he is more familiarized with Mac) don't run on power-PC. Currently web pages don't display correctly, flash and other plug-ins and web scripts don't operate and it is very clunky with software bloat.
My solution? Is to install Linux so he can have a trim clean operating system. Ubuntu 10.04 [community ppc variant] runs off a live CD but is dead slow on account of the low processor power and I was unable to get gnash to run flash video a necessity as Adobe has abandoned power-PC, I suspect the gnash error is between chair and keyboard, advice is welcome. I would like to install a distro more suited to this system currently I am looking at mintPPC but can't quite follow the installation instructions what is meant by Debian squeeze the download link gives me a mini.iso is this the same thing? Also clarification on the terminal commands would be of help. Advice on a different distro is also welcome preferably one with an all in one installing process rather than the mint, Debian, Ubuntu multi-part thingy that mintPPC is; it just needs to be power PC compatible and able to run on a few hundred MHz maybe there is an easy way to put LXDE or Xcfe on a more popular Disto? As for me: I am a new Linux convert, discovering the glory this past July and am still learning my way around I am computer literate and somewhat savvy but I am not a tech head and I HATE working on them I can and do it but I don't like it and I am often hampered by ignorance of the latest new/trends and an acute allergy to Macs and Apple products in general.
View 2 Replies
View Related
Feb 25, 2010
I just did a fresh install of ubuntu 9.10 and install apache2 webserver with php5 and mysql, but for some reason I have no idea why but when upload files to the computer running apache2 webserver
http://69.242.228.170/ is the link to the ubuntu system It's not displaying the website correctly and it's not working on any pc on my network either, but it looks fine in dreamweaver when I was designing it on my laptop. list of all the files and folders in the /var/www path
Code:
root@requiem:/var/www# ls -lh
total 92K
-rwxr-xr-x 1 root root 446 2010-02-25 18:27 bg.gif
-rwxr-xr-x 1 root root 2.3K 2010-02-25 18:27 contact.php
-rwxr-xr-x 1 root root 143 2010-02-25 18:27 content_bg.gif
[Code]...
View 8 Replies
View Related
Jul 25, 2009
Anyone noticing intermittent problems with the screensaver not kicking in or the display not sleeping? This is in gnome under F11.I have the Power Management Preferences set to put the display to sleep after 30 minutes of inactivity and gnome screensaver is configured for 5 minutes idle time.On a regular basis, I'll leave my computer come back anda) the screensaver hasn't kicked inorb) the screensaver kicked in, but the power management features didn't kick in to put the display to sleep.It seems to be an intermittent problem and usually it goes away after I restart X, but then at some point it comes back. In the past, I've gotten in the habit of being logged in for weeks/months at a time but I find that I can't go more than a few hours without logging out and back in or else the screen won't go to sleep.
View 14 Replies
View Related
Sep 17, 2010
I have gotten my project ubuntu server 10.04 up and running and logged in remotely with a terminal emulator program called AccuTerm that I use from work. It has multiple control files and want to know which file works best with ubuntu server. My reason for asking is some of the manual pages do not display correctly and keyboard functions seem to function incorrectly via VT100 and I have eighteen to choose from?
View 2 Replies
View Related
Nov 19, 2010
I recently decided to attempt to implement automatically disabling my laptop's touchpad when my external mouse is connected, and I am just about there.Unfortunately, what I suspect to be a permissions problem is stopping me from succeeding.Here's what I have done sofar:Written a Script which will enable or disable the touchpad based upon cli argument (verified to work when called via terminal)Set up a rule for halevt which successfully launches an arbitrary command when the mouse is connected or disconnected (even successfully logging itself)Determined that the script is in fact being called upon device connection (by adding echo statements to the script which are working)When launching halevt, I have even tried running it as my user/group, and with a special config file, all to no avail.Also, here is my command to run halevt:
Code:
sudo halevt -u brendon -g brendon -c /home/brendon/.halevt.xml
My .halevt.xml file:
[code]....
View 4 Replies
View Related
Apr 1, 2010
i just installed OpenSuse 11.2 whiteout problems, once finished i reboot my eeepc, but the startup stops at :
Code:
Starting udevd:
Loading drivers, configuring devices
View 9 Replies
View Related
Dec 4, 2010
I recently got the last round of updates, including linux kernel 2.6.32.26. after several programs froze up (i hadn't restarted since the update) i restarted only to find that Gnome starts up into a different look than I had it setup to (normally with a custom theme and without a login prompt). it now starts with a more basic theme and a login prompt which won't accept my password. something similar had happened before and i fixed it by booting into recovery mode and running dpkg, and having to reboot more than once but it returned to normal. I tried running it again and it hasn't worked, so I must ask for advice. I am working from Fedora 10 on the same computer.
View 9 Replies
View Related
Feb 2, 2011
I got jdk, jre, tomcat, eclipse installed correctly (I'm sure about that)I can start tomcat and works fine, and eclipse too.but whenever I try to run server through eclipse (server->run) I got following message:
Code:
WARNING: Failed to create work directory [/home/kossel/workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/work/Catalina/localhost/_] for context []
Feb 2, 2011 6:08:23 PM org.apache.jasper.EmbeddedServletOptions <init>[code]....
did ls -ln workspace I get:
Code:
drwxr-xr-x 4 1000 1000 4096 2011-02-02 16:34 Servers looks has permission right?
View 1 Replies
View Related
Jan 26, 2010
my printer has a known CUPS bug; A4 is printed as letter size; i.e. printing only appears on the bottom half of the page. I downloaded a ppd file at [URL] but it improved nothing. Also installed the bug's patch (sorry I don't have the bug's number) and followed the instructions; zero results. Upgraded Ubuntu 9.04's CUPS-related repositories to 9.10 but no improvement. Every test page still comes out with just the top third sitting at the bottom.
View 1 Replies
View Related
Feb 6, 2011
After a fresh install of Slackware64-current could not get X to start correctly with the nouveau driver. When ever X started display was scrambled. Only kde would partially work with desktop effects enabled, but very slow. Without desktop effects enable kde was also scrambled. After trying several things and googling came up with the following. To get X to work created a nouveau-kms.conf file in /etc/modprobe.d with the following text.
Code: options nouveau noaccel=1 The one draw back to this solution is that Kde will not start with desktop effects enabled. Hopefully this will help someone else with similar problems. Maybe someone else has a better solution. video card: Nvidia Geforce 6150se nForce430
View 8 Replies
View Related
Mar 17, 2011
I have a windows 7 version right now on my laptop, but someone screwed me over and put a 'non genuine' version and now its slowly starting to glitch out on me.I can reinstall windows but Im sick of it and would rather run Ubuntu. My scripts are not running correctly on this glitched out version of windows anyway.I just have some simple question regarding the switch over from windows to Ubuntu,
View 3 Replies
View Related
Oct 1, 2015
i installed debian 8.2 with gnome 3 desktop environment when i run this command
Code: Select alldconf write /org/gnome/nautilus/preferences/default-sort-order type i got this error
Code: Select allerror: 0-4:unknown keyword
Usage:
dconf write KEY VALUE
Write a new value to a key
Arguments:
KEY A key path (starting, but not ending with '/')
VALUE The value to write (in GVariant format)
what should i do ?
also when i use gsettings i get
Code: Select all(process:4333): dconf-WARNING **: failed to commit changes to dconf: The connection is closed
View 6 Replies
View Related
Apr 28, 2010
I've added Warsow.i386 (0.5) to my Applications > Games menu as a shortcut, but whenever I try to run it, my screen goes black for a second and then returns to desktop. Running the same file from its folder in /home runs the game fine.Is this common problem with shortcuts or is it just me and the game?
View 3 Replies
View Related
