When I do xhost + also it hangs.Without the xclock I am not able to run oracle reports in production for bar code printing as I am not able to start a standalone reports server. Help needed to start xclock and where to look for any help
View 2 Repliesi am installing oracle database 10g2 in my fedora12 with the help of this link ORACLE-BASE - Oracle Database 10g Release 2 (10.2.0.1) Installation On Fedora 7 (F7)Now i am start my Database using sqlplus:[oraclelocalhost ~]$ sqlplusSQL*Plus: Release 10.2.0.1.0 - Production on Thu Sep 16 10:53:47 2010Copyright (c) 1982, 2005, Oracle. All rights reserved.Enter user-name: /as sysdbaConnected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 167772160 bytes
[code]...
I recently dist-upgraded from Debian 5 to 6 (squeeze). Since then, the xclock I run from my window manager's start script isn't displaying correctly (it displays only a "0"). The thing is, if I run the same command in my start script in my terminal, it works just fine, as it has always done...
I use this rather "old" X applications because I like my programs simple/not buggy/fast, and it's resulting a rather annoying problem (being that apparently nobody else has it...).
All other programs in my start script (gnome-terminal, emacs, xmodmap, etc) are working with no problems whatsoever.
My window manager: sawfish
Command to run xclock in my start script:
Code:
xclock -digital -brief -geometry -0+0
Attached picture:
Top: xclock initialized by start script
Bottom: xclock initialized by terminal
After some effort, finaly managed to get my Canon PIXMAiP4200 printer connected as a network printer. (I connect it through the USB printer port on a DLink DI-524UP router) Everything seems ok so far, except that I cannot find any means of specifying that printing should start from the last page.
View 2 Replies View RelatedI'm a new user for oracle,tried to install oracle 10g on redhat linux 5 but gettinh the same error message.response/ runInstaller[oracle2@localhost database_10201]$ sh runInstaller _runInstaller: line 54:/tmp/database_10201/install/.oui: Permission denied_Doany one plz help me how to give full set of permisions to an user in linux to access a folder??
View 2 Replies View RelatedWe have a Oracle 11.2 database running on Red Hat 5.5. The database have a scheduled job to fetch some files from another server using ftp, and herein lies the problem.he job runs a pl/sql that runs the function in an (by us compiled) external libraryThe ftp-functionality itself is done by using libncftp and it's API's.The process starts correctly, but then trying to login to the actual ftp host, ncftp only reports "Unknown username/password" (which is not the case).I have the exact same code in an executable and when run from an interactive shell, it works fine.So the only thing I can come up with, is there are differences when the process is started by Oracle, rather then being ordinary" process.And I am stuck.If there are any environment variables, paths etc missing when running the extproc-process, how do I find out which?Because the real problem is NOT wrong user or password.
View 8 Replies View RelatedI'm having some trouble getting xclock installed on RH linux (RedHat 4.1.2):not sure how this could be I thought xclock was a very common package? Is there a way to update the repository locations to point to more recent/updated database?Quote:
[02:43:22][root@host:/home]# yum search xclock
Searching Packages:
Setting up repositories
[code]....
I connected to host unix machine (oracle enterprise linux, shell is csh)by nomachine client(tried both the gnome setting and custom setting with konsole command). echo $SHELL
/bin/cshAfter I run .sh file (bash command) , the xclock does not work any more.Anyway to make it work after running the .sh file?
I want to configure the xclock in RHEL 5 can any assist me in configuring the xclock option.
View 2 Replies View RelatedI have created the following script which runs very well when it is executed alone.This script is to be run by a third party application (Oracle clusterware).The script (when is run by the application) doesn't successfully execute the xclock command. It even doesn't return the $USER variable.Following is what I got:
Code:
#
# Copy of the script
[code]...
I'm trying to execute some code (let's call it login.java) when I log in and out of my linux machine. Is there any way to do this? I'm looking for perhaps a way to trigger the code? I've thought of just putting it in my .bash_login but preferably the code would launch on normal login, not when I start my terminal.
View 2 Replies View RelatedI got the following task from my boss. I have to find out if there is some alternative tool for create reports from Squid except SARG. Now, we use SARG, but my boss told to me, that the main problem of SARG is, that SARG generate huge amount files, which cause problems during migration our servers. He told to me the following condition for change of current tool (SARG):
* standard package of Debian
* generate less amount of files, optimal is to save reports to the database
So I would like to ask you if you know about some tool (I can not find some by google)... and the best would be if you told to me some practical experiences.
i finished installing oracle 11g r2 with EM but i cant find any good script that will close the database completely before rebooting they all start it correctly but for the shutdown they don't wait and the database restart in recovery mode
View 3 Replies View RelatedI'm having a problem updating the cdrom. the error i get is Failed to fetch cdrom://Ubuntu-Netbook 10.04 _Lucid Lynx_ - Release i386 (20100429.4)/dists/lucid/main/binary-i386/Packages.gz Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs. I tried using apt-cdrom, it tells me the commands and options, which i wrote down for reference, but still that has an error which is, E: Unable to stat the mount point /media/apt/ - stat (2: No such file or directory)
W: Failed to mount '/dev/sr0' to '/media/apt/'
E: Unable to change to /media/apt/ - chdir (2: No such file or directory) Is there another code to recognize the cdrom? because the help of the command and options list didn't give a code for recognizing the cdrom. Im using ubuntu 10.4lts on my netbook and yes i do have a external rom
I use kubuntu (8.04) which does not have a root account.
[sudo] password for ts:
However, starting xclock or gvim on root shell on konsole has the "Can't open display" error appears.
Error: Can't open display: localhost:0.0
Press ENTER or type command to continue
I have installed Oracle 11g on 5.3. Now, I am trying to START and STOP oracle automatically on system startup and shutdown. I am following this link To have this effect, I have created /etc/init.d/dbora
Code:
#!/bin/sh
# chkconfig: 345 99 10
ORA_HOME=/oracle/app/oracle/product/11.1.0/db_1
[code]....
I have dell inspiron 1525.I installed Redhat linux 5.2 and then Oralce 10g R2.I can not start Oracle enterprise manager(EM) on redhat.Except EM oracle is working properly.Why is so ?
View 2 Replies View Relatedhere's my setup: 32 bit Ubuntu 10.10 with an AMD 2.7GHz processor, and 2GB of RAM.I get Oracle 11G R2 installed, except two things fail near the end of the installation (I think they're both Oracle Net services or something. I broke a cardinal rule by not writing them down. ) I try to use sqlplus through Terminal, but the system can't find sqlplus. I'm assuming it isn't installed. I'm unable to connect to it through JDeveloper.
View 2 Replies View RelatedI have installed oralce-xe 10g on CentOs. I am facing error while connecting it
SQL> connect
Enter user-name: HR
Enter password:
[code]...
Added the repo and installed Virtualbox.
Added user as vboxusers group
Added the following packages according to the error log
- make gcc kernel-source dkms
Finally /etc/init.d/vboxdrv setup reports an error
Stopping VirtualBox kernel modules done
Uninstalling old VirtualBox DKMS kernel
[Code].....
I've AMD64 system with Ubuntu 11.04 installed. It's been rough ride for me to install oracle-xe-universal. I've already spent more than 2 days on this. Still unsuccessful.
1) First I downloaded the packages libaio_0.3.104-1_i386.deb and oracle-xe-universal_10.2.0.1-1.1_i386.deb
2) Then I ran
sudo apt-get install bc (ran fine)
sudo dpkg -i --force-architecture libaio_0.3.104-1_i386.deb (ran fine)
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
(gave me dependency error for libc6 (>= 2.3.2), I modified the control file to remove dependency and rebuilt the package) (now worked fine) Oracle xe is now installed. Then I tried to start the DB it started but it's HTTP client never started. So I decided to uninstall the oracle-xe=universal. None of the sudo apt-get remove oracle-xe-universal command's didn't worked for me. So i went for manual uninstallation directions as per oracle link.
I ran the following command-
--Manually uninstalling Oracle 10g--
sudo rm -rf /usr/lib/oracle /etc/oratab /etc/init.d/oracle-xe /etc/sysconfig/oracle-xe /usr/share/doc/oracle_xe /usr/share/doc/oracle_xe_client
Then I again ran the following command to install oracle-xe
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.0_i386.deb
See below what I got as the output-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
[code]....
Even in applications menu I don't see the if oracle has been installed. So i conclude first time installation was ok but somehow http client didn't worked. After manual uninstallation, second installation didn't even loaded/installed the oracle-xe in init.d directory.
Currently using oracle 9i with 3 database(maindb,arist,samp) in redhat 5.3 server .I want to stop 2 database "maindb" and "samp" manually ( in XP or Vista we can stop service oraclemaindb and oraclesamp ), but in redhat i dont know how to stop services and how to see currently running oracle services.
View 1 Replies View RelatedTrying to add printers to a new install, and system-config-printer doesn't start. CUPS is working, and I am able to add and manage printers using http://localhost:631, but I would prefer to use the applet.
Code:
lee@tycho:~$ system-config-printer
Traceback (most recent call last):
File "/usr/share/system-config-printer/system-config-printer.py", line 104, in <module>
[Code]....
Similar problems (possibly different causes) include [URL], from only three weeks ago, but no responses, and this one [URL], which I don't think is the issue because I don't seem to have an "extra" python install at /usr/local/bin/python.
I'm new to Ubuntu and I'm remote from the server. I'm setting up an Ubuntu server 10.04 x64. My intention is to load Oracle 11g, however I know I will need to be able to export an X display back to my desktop (Solaris) to run the Oracle installer. What do I need to load to get X working enough to export the display back to myself. I need to provide additional information. Since I'm new I may not have adequately covered what's needed.
View 4 Replies View RelatedI am a first time Linux user - though I've Unix and Windows experience. So though I can follow your most tech instructions, I'll need some hand-holding.
Need help getting my wireless network to work on my newly installed Oracle Linux on Dell laptop.
Not sure what wireless card is installed, or it's mac address (though I can boot into windows and get that info, I don't want to - it'll be kind of a let down if I can't fix it all thru Linux).
Install has detected a Broadcom wired card, but not the wireless. Funny thing is that it detected the Bluetooth.
My /dev/sda1 has problem and we are unable to start my FC5, how to bypass it .. ?
View 3 Replies View RelatedI've installed Oracle XE yesterday (forcing architecture, cause i am using amd64), it was working fine until i reboot my computer.
At the beginning i wasn't able to start because i was getting an error:
- "Operation failed. my_user is not a member of 'dba' group."
So, i went to System -> Administration -> Users and Groups -> Manage Groups -> (selected 'dba') -> Properties, and checked my user.
But now, when i click on "Start Database", the cursor stay 'waiting' and after some time it goes back to the pointer and nothing happens. On "Run SQL Command Line" i get "SP2-0640: Not connected" and in "Go To Database Homepage": - "Firefox can't establish a connection to the server at 127.0.0.1:1234"
(When installing i chose port 1234)
Now i cant uninstall it (I've installed it through dpkg for forcing architecture, and opening the .deb package i don't get the "uninstall" button)
It's a problem that the time display of fedora is too small for me.So that I'd like to try xclock.However,I don't know how to run this program automatically as soon as I log in to my system.I got stuckedI've tried to modify the .bashrc file in my home directory.
# .bashrc
# Source global definitions
if [ -f /etc/bashrc ]; then
. /etc/bashrc
[code]...
# startx
xauth: creating new authority file /root/.serverauth.18174
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
[Code]....
Fatal server error: xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining. Couldnt get a file descriptor referring to the console
i have used these commands also
mknod /dev/tty0 c 4 0
chmod 660 /dev/tty0
I have configured nagios on my local VM machine and i got no error
Total Warnings: 0
Total Errors: 0
Things look okay - No serious problems were detected during the pre-flight check
But when i am unable to start nagios # service nagios start nagios: unrecognized service