Software :: Unable To Access Net By A Usb Or Ethernet Or Whatever To Get The Wireless Drivers?
Jan 2, 2010
I'm planning to switch back to Linux from Windows 7, but before I do that, I have a pressing issue. I won't be able to access my net by a usb or ethernet or whatever to get the wireless drivers (always had to do that on Ubuntu, guessing Fedora will be the same since I've never used wifi on it before) and need to know if there's a way to get those in an rpm file. Is this possible? I'm otherwise unable to run Fedora with internet for an indefinite and unacceptable amount of time,
View 5 Replies
ADVERTISEMENT
Sep 26, 2010
I'm been wanting to try Ubuntu for a while now, and when my mom's netbook started to get insanely slow with WinXP, I tried the Netbook Remix on a USB stick. I LOVE it, except I am unable to get the wireless working, which is the only thing stopping me right now from a full install.
I believe my problem is that I need to activate the two drivers "Broadcom B43 wireless driver" and "Broadcom STA wireless driver" which appear as unactivated when I go into the hardware drivers admin tools. Unfortunately this netbook (HP Mini Netbook FW376UA) does not have an Ethernet port, so I can't just temporarily hard wire it to activate these drivers.
So my main questions are: 1) How can I activate those drivers without an internet connection?, and 2) Do you think that activating these drivers is indeed the answer to getting the wireless working?
The details:
Machine: HP Mini Netbook FW376UA
Network Controller: Broadcom Corporation BCM4312 802.11b/g
Ubuntu version: Ubuntu 10.04 Netbook
View 4 Replies
View Related
May 12, 2011
I absolutely love Lubuntu on VirtualBox. I installed it to my Compaq Mini CQ-10 without issue. However, there are no drivers for the Wireless or the NIC. Ok, so I go to Broadcom and download the drivers. But, when I try to install with the Makefile, Terminal tells me that make is not installed! Now, how do I install my drivers without make?
View 4 Replies
View Related
Sep 13, 2010
Unable to access our site via eth0. Can access the same site, via same ISP on wireless laptop, or via eth0, but using ip annonymizer service. Have a feel that it could be something obvious, but after digging through Modems firmware I am running out of ideas
View 3 Replies
View Related
Jun 5, 2011
I am using ubuntu (11.04) here, when i connect Bsnl broadband link(wired connection). Internet is connect automatically But unable to instal, upgrad and access Internet pages ..
View 1 Replies
View Related
Mar 2, 2011
Just today I installed opensuse 11.3 on my Compaq CQ61. Even though I am able to connect to networks (both with an ethernet cable and wireless) I don't have internet access. I have used opensuse for a very brief period in the past and I had no such problem.
View 3 Replies
View Related
Sep 24, 2010
I just installed Ubuntu Netbook Remix on my MP Mini 1000 and I have run into some troubles.First off, my wireless card doesn't seem to work out of the box. I figured that I would just plug into my router via ethernet and run updates, but then I ran into my next problem.
Nothing happens when I plug in an ethernet cord. I have a desktop running Windows 7 and a jumpdrive, so I can use those to get the files I need, but I don't really know how to fix this issue.I believe my wireless card is a Broadcom 4312, but I am unsure what ethernet card I have. If possible, I would like to just get the ethernet working and then let the restricted drivers manager take care of the rest.
View 5 Replies
View Related
Mar 1, 2010
I have got a laptop running Debian squeeze. I wish to share the wireless connection of the laptop (wlan0) to the ethernet port of the laptop, so that I can share the wireless connection to my desktop PC which is connected to the ethernet port.
[My desktop PC]---Ethernet---[My laptop]---))) WiFi )))---[Public network/ ISP]
I have read the article on Ubuntu community: [url]
I followed the steps, and the /etc/network/interfaces file on my laptop is:
Now the situation is: My laptop can connect to Internet (i.e. ping debian.org from laptop is fine), my desktop PC can connect to my laptop (i.e. ping 192.168.1.1 from desktop PC is fine). However, the desktop PC cannot reach the Internet.
I also read the information on Debian Wiki: [url]
It seems I must install and configure ebtables before sharing my wireless connection to ethernet port. Is it true? (But why the article on Ubuntu community doesn't mention it?) Or I just made some mistakes?
View 1 Replies
View Related
Jan 5, 2011
I have a wireless card that needs the Broadcom B4311 Rev. 1 driver but I don't have a way to download that driver since I don't have wireless access since the driver isn't installed. I'm running Linux Mint Debian x64.
View 2 Replies
View Related
Mar 5, 2011
I really want to drop Windows, but wireless connectivity and frequent crashes are really discouraging me. I have a dual-boot W XP with Ubuntu 10.10. I do not have the computer on, so I'm writing this from my weak memory
USB Adapter - Netgear WNDA3100-100NAS = v2
The adapter works under W XP with no problems
The router, Linksys WRT54G sees the adapter in the dhcp table
lsusb lists the adapter.
I have copied the drivers from the install CD onto the desktop. I cannot figure out how to install or access those drivers for the installation. I tried to install the ndiswrapper from the software center, but the center shows it's available from the "main" source. I've looked in the package manager, but can't find it. When I go into terminal, and enter one of the suggested commands in the forums, it can't be located. I have a Belkin F5D8010 installed on this computer, and it works great under W XP. I want to try to get this installed, but until I can figure out installation of the ndiswrapper and how to access it, and get the drivers recognized, I'm at a standstill.
View 1 Replies
View Related
May 2, 2010
I have just completed a clean install of 10.04 and my wireless is not working.It detected my hardware and installed the drivers. It is activated in the hardware Drivers section and the wireless button light is lit.When I click the connection icon in the panel the wireless has nothing to connect too and says disconnected. The Ethernet connection is working fine.BTW the wireless worked just fine in 9.10.
View 2 Replies
View Related
May 8, 2010
Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again.
However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook.
View 2 Replies
View Related
Feb 15, 2011
installing the PCI wireless card drivers in CentOS linux. I have "Sabrent PCI-G802 PCI Wireless Card - 54Mbps, 802.11g". I tried looking in google and tried multiple ways to install the driver but failed , I have followed the instructions given in the link i.e.
performed the following steps .....
1.# tar xvzf package.tar.gz (or tar xvjf package.tar.bz2)
2.# cd package
3.# ./configure
4.# make
5.# make install
I have the original cd (this cd has linux drivers also) which came with the PCI card but its not a plug and play cd like the MS windows, the cd drive is not reading the disk (But i can open it in windows 7). I copied the installation files from the cd to usb drive on my windows 7 PC and copied them on to the CentOS /home/user directory and performed the above mentioned steps. I was successful in getting till the second step. when i did the step 3 the system is asking some thing about
"Linux kernel source directory [/usr/src/2.6.18-92.el5PAE-i386]: Configure"
I just pressed the enter button and it went to the next message which is
"Linux source tree 'Configure' is incomplete or missing!" Configuration failed
View 3 Replies
View Related
Mar 7, 2010
I am not able to use internet using wireless lan. I am Not able to find the hardware and install the drivers .Please help me.I am Using red hat linux 5.4.
View 3 Replies
View Related
Jan 29, 2010
I have dell inspiron-1545 laptop.I installed rhel5(downloaded from torrent for free),kernel (2.6.18-8el5xen).i got a driver cd from dell containing rhel drivers for audio,video,network.i tried to install those drivers but could not.it asked for dkms 2.0 which i installed.but even now also some errors are coming(like dependencies missing etc.).so no internet ,no sound,no video on my laptop.
Some command outputs:
When i boot every process come OK except(cpu micromodule failed.fatal error and hub port status failed). i think these cards have not been detected.
View 1 Replies
View Related
Sep 1, 2011
My laptop was working fine on wireless till the userinterface changed and it defaulted to ethernet and now it won't let me go back on wireless How do i disable ethernet?
View 4 Replies
View Related
Oct 12, 2010
When I download the drivers for my Broadcom card (BCM-4312), I get this error message:
Quote:
SystemError: installArchives() failed
Is there any way to fix it, or should I post to launchpad about a bug? I have 10.10. Update: When I install from the Ubuntu Software Center, it completes successfully, but I get this error message: installArchives() failed: Selecting previously deselected package glines.
Quote:
(Reading database ...
<snip>
(Reading database ... 100%
(Reading database ... 131362 files and directories currently installed.)
[code].....
View 3 Replies
View Related
Sep 10, 2010
I have installed Ubuntu for netbooks on my four year old laptop and of course the wifi card is unable to search for wireless networks when I'm booted into Ubuntu. I do have the driver software on a recovery disk. Would installing it in Ubuntu fix my problems?
View 4 Replies
View Related
Apr 16, 2010
I set up an older computer with Ubuntu 9.10 and tried to get my Linksys AE1000 Wireless N adapter to work. My first mistake was not checking in advance to see if this adapter would work, but I have taken the leap and I am intent on making it work. I ran lsusb and it gives me a device number (13b1:002f) so I know it can be seen and I have also installed indisgtk the GUI for Wirless drivers. I have tried some suggestions from other posts to no avail.
View 9 Replies
View Related
May 11, 2011
I am having trouble connecting to 1 particular wireless hotspot. It used to work in Ubuntu 10.10, but after upgrading to Ubuntu 11.04 it sees the Access Point, tries to connect but never succeeds. I can however still connect to my home router. Both use WPA2, both have a good signal. I have an ASUS UL30a laptop with a (output from lspci): Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) NIC I was thinking of installing the linux-modules-backport-net package?
View 1 Replies
View Related
Nov 12, 2010
I'm unable to get into my university's WLAN network. LAN works just fine, but sometimes it's quite convenient to be able to access stuff wirelessly. It doesn't seem to be a hardware problem, because if I configure my computer according to our computer department's instructions it works fine with Ubuntu (currently I carry around a stick to get into the Internet when I really need it and don't have a cable). Some info:
My device:
Broadcom WLAN controller on a Lenovo G560
My system:
OpenSUSE 11.3 64-bit
The drivers are installed, I can get into normal private networks, but have never managed to get into the university network except for with Ubuntu.
The university instructions tell me to use the following settings:
Security: WPA Enterprise
Authentification: TTLS
Inner Authentification: PAP
Username: My username
Password: Password
CA Certificate: Deutsche_Telekom_Root_CA_2.pem
In the KDE instructions, they tell you to write "anonymous" into the anonymous identity field, but in the GNOME instructions it says to leave it blank. In Ubuntu, I leave it blank and it works.
I've got the recommended settings, which also work in GNOME.
I'd ask the tech support here, but I am the tech support We've got it working with other systems, like I said, but not with SUSE, and I'm a SUSE fan.
View 9 Replies
View Related
Jun 7, 2011
Machine is an MSI U130 netbook running Ubuntu 10.04.2 LTS 01:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe interface
Code:
wlan0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA"
Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
[code]....
I realize that Ubuntu recognizes the card, but I'm not sure why it's not picking up any networks that are around and says "disconnected", even though I've made sure that the wireless network light is enabled on the netbook.
View 9 Replies
View Related
Dec 29, 2010
I am unable to access wireless network from my notebook. My configuration is Dell i5, 4GB RAM and 1397 W-LAN and I have F13. I can still access Internet through Ethernet using a LAN cable but the network monitor doesn't show list of Wireless networks which my room mate's windows 7 machine easily detects.
If anyone needs more info please provide me the steps to perform to find that out
View 6 Replies
View Related
Apr 5, 2011
I installed redhat enterprise Linux 5 on an acer laptop to dual boot with windows vista the nic works perfectly with windows but does not work with the RHEL5.
View 4 Replies
View Related
Apr 5, 2010
I installed FEDORA 8 on my laptop for a class project. everything went find except. with I attempt to connect to any network. I keep getting the no network device error. so I tried to install the Ethernet and wi-fi driver directly without success.
View 1 Replies
View Related
Apr 8, 2010
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
View 3 Replies
View Related
Nov 26, 2009
I just upgraded to Fedora for the first time. I've been using Debian 32-bit forever. I thought I'd try Fedora 11 64-bit. Everything was working fine until yesterday's LAN Party. I could not setup a BZFlag server that others could connect to until I booted up a KNOPPIX 32-bit DVD! Is there something buggy about the 64-bit ethernet drivers or am I missing something here
View 2 Replies
View Related
Jan 9, 2011
I'm running Ubuntu 10.10 on my brother's computer. He has his sound system connected via the 3.5MM audio connector, but he also has an optical port on the back of the computer we have yet to try (he has cable and all though) but I doubt that will work versus the 3.5MM audio connector. His ethernet also doesn't work, he doesn't need it as he has a Linksys wireless PCI card and that works as of right now.
I also am not sure about his current graphics driver, in Windows XP he could have his native screen resolution which was either 1920x1080 or 1920x1200, I'm not at his place right now so I can't find that out. On Ubuntu he can only go to like 1400x1050 I believe, which isn't nice on his 23" monitor.
View 2 Replies
View Related
Jun 7, 2010
I am trying to work out where the driver for my ethernet connection is under Ubuntu 10.4. I am trying to install Debian testing on a new machine, provided by employer, which has an onboard ethernet connection instead of a separate card. At installation, Debian just says it cannot find an ethernet connection and offers a list of drivers to choose from. I have no idea what to choose so I thought I would install Ubuntu on the same machine and get the driver from there. The mboard is Intel DQ57TM
View 12 Replies
View Related
Jun 27, 2010
I've installed Ubuntu Netbook 10.04 on my HP DV2000 laptop and now I want to get my wireless to work by installing the proprietary broadcom drivers (4311, I think). But my internet doesn't work yet obviously, so I need to download the drivers to my thumb drive on my desktop and install them on my non-networked laptop.My issue is that I don't know:a) Where to get the driversb) How to install them from a local drive
View 2 Replies
View Related
