I am having a Dell ST2410 LCD and a laptop IBM.I want to span my desktop so that some portion is on laptop and some on external monitor. I tried xdmx but it did not worked.
View 6 RepliesI have a Visio TV that I dropped and cracked the LCD display in one corner, for watching TV it's basically useless now. On a whim I plugged it into one of my computers and about 75% of the screen is still usable. Only the bottom right hand corner of the screen is messed up. What I'd like to do if possible is to define an area of the screen. Say for instance the top left hand corner across and down to where the screen starts getting bad.
Like a left click and drag out the good area and then make only that area "the monitor" for the OS to use. I'd then probably build a case or something to house it in and only show the "live" area to clean things up. I'd like to use Ubuntu. But if you know I can't do it in Linux but can in Windows I'd consider that option as well. I just hate to junk the TV if I can use it some how as a monitor.
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.
My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).
I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.
I have slackware 13.1 installed on my laptop and use kde.I just bought a new external monitor 1680 X 1050. The laptop's monitor is 1280 X 800. From KDE i configured laptop's screen to be inactive and the external monitor at resolution 1680 X 1050. When i boot and enter KDE both monitors are activated, ican't understand their resolution. Then, just when i enter system configuration-monitor-monitor configuration the laptop's monitor automaticly turns off. Then i configure the external to 1680 X 1050 resolution. This happens every time i have to enter slackware. How to setup my xorg.conf file. You can see it below:
[Code]...
Can I somehow span the gnome panel to my other monitor, or to add a new gnome-panel to my second monitor?
View 1 Replies View RelatedThe laptop is a samsung X30 and i spent days trying to install ubuntu 10.04 unsuccesfully as there was no clear picture on the screen, just a black and purple splodge. I then saw a post on these forums discussing the default resolution of ubuntu and how it is incompatible with some machines so via VGA cable i connected it to my TV and sure enough i could see what was going on and finished the installation process. I assumed that once ubuntu was fully installed i would be able to change the resolution using the monitor preferences but none of them worked. I am now faced with the problem that unless plugged into the TV i have no picture on my laptop, does anyone know why my laptop screen wont work with ubuntu and how
View 2 Replies View RelatedI have been using Ubuntu for a while now on my netbook, however I have an older HP dv5 laptop that hasn't been used in a couple of years that I would like to format and install a linux distro on. Problem is that it has a very broken LCD screen and I had been previously using an external monitor with it. I had tried to install Ubuntu 9.04 on it at one point but could not progress very far into the installation due to the external monitor. I had also tried using the non-graphical installer but had little success with it as well.
I had thought of removing the HDD from the laptop and putting it into another of my laptops and installing it that way, but the specs are different between the two laptops and I figured that it would not work properly once the HDD was switched back to the older laptop. Is there any way to use an external monitor to install a newer version of Ubuntu? or perhaps is there another distro that is easily installed using an external monitor? My plan is to eventually remove the broken screen all together and only have the external monitor connected, the broken screen is a bit unsightly.
I am looking for a way to switch quickly and easily between my Laptop Display and my External Monitor, in Windows I had it configured so that when I plugged my Monitor in it would switch to that and when I removed it it would switch back to Laptop Display. From what I have tried it looks like this isn't possible with Linux, but I would like to get to the stage when I can click an icon to switch (or 1 to go to External and 1 to go to Laptop) My Laptop has an ATI Mobility Radeon HD 4500 Series Graphics Card and I have so far noticed the following issues.
1. If I use the Gnome Monitors instead of ATI Catalist Control Centre it seams to cause some strange issues include confusing Linux on what the max screen res supported by my External Monitor is.
2. When I try and enable/Disable either Display or change Resolution, I am told that I have to reboot before the changes take affect.
Based on much internet searching, I've found that I was/am not the only one struggling to get Fedora 10 to span the display across a laptop screen and an external monitor. So what I have here are instructions to do so:
1) Fedora 10 does not (by default) use an xorg.conf file to configure the display. So type the following command into the command line: yum install system-config-display
2) Go to the menu bar and navigate to System>Administration>Display. I left all the display settings as they were and hit OK (repeat this step twice to make an xorg.conf backup). This will generate the xorg.conf and back up files in the directory: /etc/X11/
3) Now we need to see what size virtual screen you need. Type the following command into the command line (without the quotes): "xrandr --output VGA --auto --right-of LVDS" It will tell you that you are asking for a certain size screen. Write those numbers down. I have a 1600x1200 external monitor so my number is 2624x1200 (1600+1024 x 1200).
4) Change directories to /etc/X11 and type (without the quotes): "sudo gedit xorg.conf" Scroll down to where the device section is. Mine looks like this:
Section "Device"
Identifier "Videocard0"
Driver "intel"
EndSection
Some videocards need to turn 3d acceleration off in order for dual screens to work. It is important that you turn off desktop effects if you turn off 3d acceleration!!! So under the driver line add the line (with quotes): Option "NoAccel" "true" Mine looks like this:
[Code]....
Scroll down to where the screen section is, and then find the display subsection. It should look something like this:
[Code]....
I am running Debian 8.3, and I'm running Gnome 3.14.1.I have an external monitor plugged in with HDMI, and while Linux is loading both screens are on duplicate. Once the GUI kicks in, only the external screen works, so I have to enter my password blindly. Then, I open a terminal and run
Code: Select allsudo echo 950 > /sys/class/backlight/intel_backlight/brightness
and the laptop screen turns back on.
I'm wondering: Is there a way to streamline this so that it happens on boot, but after GNOME loads?Or: Is there a better method to solve this?
I've been unable to connect an external monitor to my laptop running 10.04, even though the resolution and framerate are right. The monitor says something like "unsupported video settings".
In other news, I put the live cd into another computer which relies on a monitor and after the very first screen with the two logos at the bottom, the monitor decides to go to sleep. I try with another monitor and it just seems to have to feed. This is the more important problem, but I wonder if there isn't some built-in problem with 10.04.
I'm a new user and recently installed ubuntu on an old samsung laptop, during the installation process i couldnt see anything on the screen and came to the conclusion that ubuntu's default resolution was different to that of the laptop screen so i plugged it into my TV and sure enough it worked however i still only have a picture on the tv, ive tried all the resolutions available in the 'monitors' box but nothing, does anyone know how to fix this?
View 1 Replies View RelatedI don't know if it sounds weird but I've been trying for weeks with no result. I want to plug my external monitor through my laptop's vga plug, close the lid and work on my monitor instead of the laptop's monitor. I looked through the gnome power management settings and when the laptop lid is closed it can only suspend, blank screen, hibernate or shutdown. I can plug my monitor and I have clone displays and it works fine but I can' find a way to shutdown the laptop screen without shutting down the vga outlet. Its a brand new Acer aspire 5734Z with a 15,6 inches screen (wich is why I want to plug in my 19 inches monitor and work on bigger screen)
View 3 Replies View RelatedI have an HP Pavilion dv9000 which I would like to use completely with any Linux OS. I have tried to install Linux Ubuntu 10.04.1 but it appears that it doesn't recognize the external monitor and ends the installation. I have a clean hard drive that I could install but I do not know which of the two drives I should replace. I can only get into windows in safe mode and I would think this may have something to do with the problem, don't no.
View 2 Replies View RelatedI've got a laptop running Backtrack4 and an external tv/monitor. Is there a program/command/configuration file that I can use to allow my laptop and monitor to connect with one another via HDMI?
View 1 Replies View RelatedI'd like to solve a little problem that I have connecting my notebook with an external VGA monitor.Everything seems to work fine, but when I close the laptop monitor, also the external monitor shuts down.I've tried to find different energy-saving setting for laptop display and external monitor. with no luck...My video card is an ATI Radeon Xpress 200M. On the ATI website there is no catalist control center for linux. (It would be very useful). So, for now, I can only use the display options on the panel.
View 4 Replies View RelatedI have Dell Vostro 3300 with Intel HD integrated graphic card and Samsung SyncMaster 2343BW external monitor.
This is the output of xrandr:
It runs on 2048x1152 full resolution, however, the picture on the monitor is blurry, it vibrates and looks like old TV with interlacing.
I tried to disable output to LVDS screen on laptop using xrandr but it doesn't help/
Previously I had HP laptop with integrated Intel and OpenSuse 11.0 and the external screen worked normally.
I have an Asus z9100 laptop with an Intel 855GM integrated graphics chip, which is running Karmic (the purpose of the laptop is to be a MythTV frontend so my understanding is that it needs to run 9.x in order to connect to the MythTV 0.22 backend - I have installed and configured this using the installable Mythbuntu package) and the laptop is subject to this bug which causes random freezes:
[URL]
So, following advice for similar freezes I've seen, I have added the following options to my grub menu.lst on the kernel line:
nolapic nomodeset
and I have edited xorg.conf so that it makes use of the vesa driver instead of the Intel driver. This results in no freezes and if I wanted to watch Myth on the laptop screen I'd be squared away. However, the laptop has a damaged screen so the point was always to output the signal to an external monitor via its VGA out.
When I attach the external monitor and boot with the setup as described, the external monitor is never detected. But I noticed that if I remove the "nolapic nomodeset" from the kernel boot line, it is detected. However, signal is only output to it during the earliest part of boot (when the Ubuntu logo is in the center of the screen before the full-screen graphic with the animated progress line), after which the external monitor goes black and all the display output goes to the laptop screen. The external monitor power button is still lit up green as if it has been detected and is receiving signal, but it's just a black screen.
get the signal out to the external monitor after the initial part of the boot process, using the vesa driver? Here is the current state of my xorg.conf:
Code:
Section "Device"
Identifier "Configured Video Device"
Driver "vesa"
EndSection
[Code].....
I have a netbook (Acer Aspire One) I'm running Slackware 13. and usually, I prefer to connect an external monitor. When I switch my machine on with the monitor connected, the display is duplicated on both screens and since I just want the netbook's screen to be off and only see the display on the external monitor, I can doxrandr --output LVDS --off
Great! However, it's a hassle to do this every time I log in and I'd like to automate the process if possible. I did some googling and I found that if you want to automate xrandr commands, you can put a script in /etc/X11/Xsession.d/ (see this). I wrote the following script to automate my xrandr commands and since the Xsession.d directory didn't exist, I tried creating it. The script was called 45custom-xrandr_settings, as the one on the RandR wiki is called the same.
Code:
#!/bin/bash
# Check whether the external monitor is connected
[code]...
I was unsure whether to post this here or in the laptop section. My problem is that I want to extend the desktop on my laptop to a monitor so that I can use BOTH the monitor and my laptop screen. But I don't see where to do this.
I am running openSUSE 11.4 64-bit.
I have an Acer Aspire One AO150 and am having trouble plugging in an external monitor under Ubuntu 9.10. There were no problems under 9.04. If I plug in an external monitor once the machine is already up, then bring up the 'display' application to activate it, it basically hangs. There are no problem under these circumstances if I have desktop effects turned off.
A few more details after a question below. The machine does not respond to its keyboard commands to switch to an external monitor, nor does it respond to Ctrl-Alt-F1, etc to switch out of X. The pointer is visible on the monitors (at the edge of each) and is frozen as a 'busy' cursor, but with no animation. The kernel does respond to SysReq commands (REISUB).
In the latest attempt I had the external monitor active earlier, then removed it and activated desktop effects. Upon plugging in the eternal monitor then bringing up the display application, it hangs.
I just installed it on my desktop. I love it so far, but I'm having trouble setting up a network in my apartment. I have the desktop directly plugged into my router and a mac laptop linked wirelessly to the router. I also have a printer and an external hard drive plugged into the desktop. The goal is to be able to access the external hard drive and use the printer from my mac laptop, as well as access the mac laptop from the desktop.
Right now, I can access the mac from the desktop with ubuntu on it. Under "Places" and then "Network," I can mount the folders I want and then access the contents.
I can also print and access my external hard drive from the ubuntu desktop.
However, on the mac laptop in the Finder under "Network" there is nothing. I can ping the desktop from the mac and get a response, but I can't for the life of me figure out how to get beyond this. In System Preferences I have "File Sharing" and "Printer Sharing" both checked.
When my netbook has an extended screen, using an external monitor, all of the panels stay on the netbook, not the big monitor. When I connect an external monitor, I want to use it as my primary screen. I only really intend to use the netbook screen for skype calls (so I am looking into the webcam, and not away from it) since it is so small. I wish the secondary screen to be the netbook, not the external monitor. How can I do this?
View 1 Replies View RelatedI have a Toshiba laptop with a Intel X3100 graphics card and I'm using a second LCD display with it ( it works ok as an extension to my notebook's display ) My question: is it possible to configure the system so that one virtual desktop is my laptop lcd and another the external lcd ? Mine has a native resolution of 1280x800 and the external one 1280x1024 and I'm running Ubuntu 9.10
View 3 Replies View RelatedI was browsing and then a pop up window came up and all my display got resized randomly for a few seconds. Finally,the lower third of my monitor is total black and useless.The taskbar and dock is still visible at the bottom though but above it is total black.All my compiz settings are gone too!I have tried win7 and everything is fine there.I have tried to adjust monitor settings but nothing changes.
View 1 Replies View RelatedI am an entrepreneur/design engineer so I do a lot modeling, rendering, etc and lot of my programs can only run in Windows. I have a fully licensed version of XP that I want to install on the computer and wondering if it is possible to do the following: Partition a portion of the drive for XP. (VMware isn't the greatest as you lose your 3D acceleration, so I definitely want to do the partition) Install my programs and ensure they run. Use the machine as a virtual desktop remotely?
View 1 Replies View RelatedI have an external monitor connected to my laptop (extended display). I always drag the Totem player from the laptop screen to external monitor to watch video files. I wonder, if the Totem player can be set to open in the external monitor automatically, everytime I open it?
View 1 Replies View RelatedI was transferring some files from my external USB hard drive onto my laptop (running 64bit Karmic), and my laptop froze up for whatever reason.Everything on the screen stopped and the Scroll Lock and Caps Lock LEDs began flashing.Not knowing anything else to do, I hard booted off with the power switch.At this point, I was concerned if anything on either hard rive would be damagedI booted my laptop back up, and all seemed well until I trued to open my Documents folder.For some reason, Ubuntu will no longer open any folders at allI can't click on ComputerDocuments, Music, etc. When I do, a tab opens in the taskbar that says Opening folder. It stays on screen for about 20 seconds, and then goes away and the folder never opens.The weird part is if I open gEdit and try to load a file, I can see and get to everything.
View 4 Replies View Related