I'm happily using Mepis with no other OS's on my computer. I now would like to install Mint 10 and dual boot.The last time I tried this, about a year ago, I got into awful trouble because the two Grubs didn't co-inhabit or something.
View 14 Repliesmy Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies View RelatedI would like to know if there is any differences on how to install and to configure GRUB 2 in the different architectures (BIOS/IBM PC-Compatibles, EFI/MacIntel and Corebbot)? Does the Ubuntu installer automatically recognize the different architectures and install the appropriate GRUB 2 package ('grub-pc', 'grub-efi' or 'grub-coreboot' according to the arch)? Or does it just install 'grub-pc'? Is the location of GRUB 2's configuration files different depending on the arch of the computer? Or are they all located in '/boot/grub/', '/etc/grub/default' and '/etc/grub.d/', no matter the arch of the computer? Are the files' structure and options to configure GRUB 2 ('/etc/grub/default' and the scripts in '/etc/grub.d/') different depending on the arch of the computer?
View 3 Replies View RelatedI can't figure out how to remove a Ubuntu distro in grub that I no long have installed. I have Win 7, Ubuntu 10.4 installed but when I boot my grub menu shows Win 7, Ubuntu 10.4 and Ubuntu 10.10 that I have removed from my hard drive but still shows up in the menu. I have been trying many commands in the terminal menu to edit grub but nothing shows me how to remove a menu entry.
View 6 Replies View RelatedI have a computer with 2 HD. In one of them there are installed XP and F14. In the other there are several XP files and Mandriva (the last installed distro). At booting, the grub window I see is the Mandriva's one, where I can select F14 or XP. I should like to see at booting the Fedora's grub.conf window with selecting options for XP or Mandriva. How can I change this?
View 11 Replies View RelatedI'm just slightly confused here, but... what the? Why does installing grub-doc remove BOTH grub-pc, and grub-common? So basically it seems like by installing grub-doc, I have uninstalled grub totally (yes, it is still there as the bootloader, but i have no way of updating it now!) from my system. What's the conflict between grub-doc and grub-pc, such that grub-pc has to be removed?
View 5 Replies View RelatedI have two distros and windows installed. I only want one distro (I have decided on Ubuntu) and windows. But, the other distro, the one that I want to eradicate is the last one installed and it is its GRUB in the MBR.
I know what happens from experience if I just delete that partition with a liveCD - GRUB won't boot anything on reboot.
What do I need to do from within Ubuntu or the other Linux before deleting the partition of the second distro so that I have a working GRUB when I reboot ?
i have puppy 4.2.1 installed on my hdd and have frugal installed a older version inside the existing puppy and would like to add it to the existing GRUB menu
View 6 Replies View RelatedI currently have 10.04 installed as my primary OS. I also have windows 7 and Ubuntu 10.10 Alpha installed. I would like to be able to play around with the 10.10 without any risk of damaging my 10.04 install. However, it seems grub2 control was transfered to 10.10. How do I return control to my original distro?
View 2 Replies View RelatedI have two problems. I installed a RHEL variant (scientific linux) on an already dual boot system with ubuntu and vista.
It replaced GRUB with (I think an older) GRUB version and to add to that I cannot see my ubuntu ditro anymore. is there a way of reinstalling the GRUB that came with ubuntu then adding the RHEL distro to it?
my second problem is that I cannot figure out how to enable wake on lan in scientific linux (RHEL). on ubuntu I would just write a small script and update all runlevels to run it at startup. what is the alternative on redhat?
I have an old BIOS (only 149 GB detected in 160 GB drive). I have installed very few OS as a result - Windows in first 80 GB , 2 distros (20 GB each) in next 40 MB which is within the 149 GB. On issue of "update-grub" grub seems to detect all OS and generates grub.cfg. But on boot , one distro does not appear in the menu.
View 3 Replies View Relatedafter doing an upgrade to 10.4 and updating grub I get this message. how do I address this
[Code]...
im still relatively new to linux and fedora, and i was wondering if it would be possible to install another distro on an external hard disk and keep fedora's grub. i tried this once before but the following things happened: (fedora is on my internal hard disk) the installation to the external hard drive went well, and i set the boot partition to C: because thats the first partition however when i unplugged my external hard drive, and proceeded to boot into fedora, nothing happened. my bios screen flashed and then a blank screen with a cursor. is there anyway to keep Fedora's grub where it is and just install another linux distro without that said distro's grub and add that distro to the grub list in fedora manually? or even boot to my external from the bios itself (because mine can do that)
View 11 Replies View RelatedI was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.
View 3 Replies View Relatedsince i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
I created a new partition in Windows Vista which, after rebooting, screwed up Grub. I believe that I need to reinstall Grub and everything should be fine, and I remember reading the command to do this on this forum, but I can't find it. When I boot, I now get a black screen with white letters instead of the Grub boot menu. It says something about "Minimal Grub" at the top and gives me a prompt that looks like this.
grub>
I can boot the live CD and I have internet access with it, but I can not remember the terminal command to repair Grub. Can someone tell me this command?
is it ever possible to do dual booting with grub(legacy) ever at all!. it is possible provided i take some pain, here is the link of that post [URL] i was coward and weak i didn't try that out then. but i did try it out. now so if u haven't seen the post .... I've installed Fedora 15 desktop(Gnome) with physical Logical volume called vg_fedora lv_root(ext4) ,lv_swap and lv_home(ext4), with 500MB /boot partition and had about 200GB free hard disk space ... so i wanted to install Scientific Linux 6.1 (because our school uses RHEL 6.1)
so, while running the installer I made (added) a logical volume lv_Scientific with ext4 FS and made its mount point (/) and used the MBR /boot which overwrote the Fedora /boot (completely OK and was as expected) i restarted after installation i got SL log in and as per the directions of the thread i copied the boot stanza from grub.conf of fedora 15 (which i already had copied and pasted into a text file and copied it from there)and pasted it into grub.conf of SL you may ask why did i choose same physical LVM too save swap space ... if i had made another physical LVM i had to make another swap ( i like LVM ... its cool)
completely unexpected happened Fedora now boots but not SL when grub starts i get this error 27 unrecognised commad and when i press <enter> i get grub menu with SL and fedora when i press on Fedora it works well i get my fedora login and i did login .. everything works fine but when i press SL it goes to the previous black screen grub error 27
[Code]...
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies View RelatedI've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
I was unaware of the difficulties of installing and booting Ubuntu from the "onboard raid" that the NVIDIA nForce chipsets provide. However, I've managed to get it working reliably with one single caveat:
When update-grub builds the grub.cfg, it refers to all of my partitions as follows:
Code:
menuentry 'Ubuntu, with Linux 2.6.35-27-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(/dev/mapper/nvidia_caifaefg,msdos5)'
[Code]...
So I'm guessing that the whole nvidia_blah,msdos5 is because of that. However, it doesn't seem to explain why Grub would THINK that would work and it in fact does not work. That's the biggest source of confusion on my part.
My questions are as follows: First off, because as an IT person I want to know: Why does this sort of change work? What does changing that device name change in GRUB's behavior? Is there a setting in /etc/default/grub that would change the way it's naming these RAID devices? Is there a value for this setting that would give me the device names that work, as explained above?
If there is no setting change I can make in /etc/default/grub, could I add a sed command on to the end of update-grub or can I make a modification to one of the scripts in /etc/grub.d? What sort of change would be recommended? How would I preserve this change through later package upgrades that would possibly rewrite these files?
I've got myself the curious situation where, when I boot the system, I can get grub to start, but it always drops to the prompt.
I can run:configfile /grub/menu.lst
and this brings up the menu with no problems, and from there I can boot the system to either linux or windows. What I don't understand is why it wont go to the menu in the first place?As far as I can tell, grub/Kubuntu got confused when installing, as each of the hd#,# settings in the menu.lst have needed tweaking to let the system boot. (e.g. windows is actually hd0, but the original install had it at hd2. Likewise linux is on hd1, but the menu.lst had it at hd0). I've happily tweaked these to make the system boot, but would appreciate any help in convincing grub to actually load the menu without me having to use the prompt.
A failed upgrade, from disk images, of Fedora 10 to 11 resulted in no GRUB bootloader main menu appearing on bootup (no WIN, no LINUX choices from which to boot). I am booted directly into the GRUB command shell...so, no WIN, no LINUX, nothing. And my understanding of GRUB shell commands is very low.I have 2 hard disks, WIN on the first, LINUX on the second. I believe GRUB Bootloader is on the first disk.Sadly, I have no external install media.An old grub.conf hardcopy indicates that root =/dev/sdb2, root (hd1,0), kernel /vmlinuz....olderversion...(relative to /boot),initrd /initrd...olderversion... (relative to boot). and WINDOWS on (hd0,1), with chainloader +1
I need to somehow get past this grub shell, and re-install/re-instate the grub bootloader, so it can boot normally.What grub command(s) must I use? I've played around with the commands, but with no success.I worry that if I can't resolve this, the whole machine may be useless.
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
I have used CentOS for a while and have never run into this issue. I searched all over and didn't see a similar issue anywhere, I did an install of CentOS as a server (no GUI) with only the base. Partition is /boot ext3, size of 100MB. The rest of the drive is partitioned as / with ext3. This is being done on a CompactFlash card of 32GB in size. The BIOS sees it as an IDE drive.
When the install completes and the system reboots, the grub stops at the grub> prompt. There is no menu for OS options. If I do the following commands:
grub>root (hd0,0)
grub>kernel /vmlinuz-2.6.18-194.el5 root=LABEL=/
grub>initrd /initrd-2.6.18-194.el5.img
grub>boot
I am trying to install my laptop in a triple-boot configuration with Fedora 10, Windows XP and Windows 7 beta. I did already installed them in that order. This is how it is layed out on the harddisk:
Now i want to use grub to present a menu at boot so i can select an OS. Because I installed XP last it boots straight into XP. I've understood i should be able to do the following:
All goes well until the last step (grub-install). It gives an error stating that /dev/sda doesn't exist, which is correct; It doesn't. I do have the "device" listed outside of the chrooted environment.
My question is: How do I get /dev/sda available in my chrooted environment?
I've trawled the internet but can't seem to find the exact same issue, so I've made a new thread. So, I installed Ubuntu onto a 160gb drive. I have other drives in the system, but I disconnected them so that the system drive would be sda. Ubuntu installed perfectly with no issues whatsoever. I connected the other drives in the system, and again it booted up perfectly (although I can't remember whether the 160gb drive remained as sda or became sdd). Then I attached some extra drives temporarily to do some data shuffling.
This moved my system drive to become sdf. My computer booted fine multiple times like this, but when I was finished with the drives I rebooted and suddenly everything broke. For some reason my ubuntu installation showed up in the GRUB twice, and neither of them booted. So, I popped in the Live CD (which I'm using to type this post), and decided to update the grub. I chrooted into my system drive and ran update-grub, but it simply returned something like this:
[Code]....
The first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
I gave sda1-2 for windows and sda 3-4-5 on an extended partition for my linux OS. I installed ubuntu on sda 7 (when I go into disk utilities it shows up as sda 7 idk why) alongside another ubuntu on sda 5 ( EXTENDEDPARTITION : sda 5-6-7 ) so I could remove mandriva bootloader.Since I did, I removed ubuntu (sda 7) since it wasn't necessary but after it gave me the grub file not found.Obviously yes, since GRUB was installed from sda 7 but i have another grub.conf on sda 5 and I would like to know how to change the path of the grub reader to sda 5? or must I install all over again de grub loader?
View 1 Replies View RelatedMy Server runs "fine", then I type init 6 for rebooting or some cron job initiates Init 6 and my system stops in grub at: GRUB loading stage1.5. Error 18 After another Ctrl+Alt+Del the system boots as if anything happened. this is why I doubt that it's an issue of too big HDD or BIOS.
View 2 Replies View RelatedSo I have 2 ide hdds but whenever they are both connected, grub gets stuck at GRUB loading stage 1.5. how can I resolve this problem?
both are Maxtors with ext4 fs. primary is 20 gb and secondary 80 gb.
Jumpers are set to cable select.
Boot order in bios is correct. (primary first, secondary isn't in the list at all)