I'm now using Ubuntu 10.04 with ext4 and for the second time in my life I experienced data loss (not for real: I got backups) and I'm assuming problems with the recent ext4 fs.
I want to restore all of my configurations (/etc and the like), data and home on reiserFS: is this possible? What to do in order to accomplish that?
I install and tested Restore EE Backup server on a test PC with basic configuration and its working fine.
[URL]
The issue i have is where is the location these backup snapshots or files are saving? I want to add a separate Storage to save the backup?
I am now preparing myself to upgrade lenny to squeeze and decided to do a backup on my system. I used backup-manager to do the job and it worked fine. how do you restore said backup data?
View 4 Replies View RelatedO/S: Fedora 12
I am newbie in linux. What I want to do is: Make backup for my file system, cos I learn how to configure servers. So if I made some thing wrong, I want to be able to restore the default setting for my files. Instated of install new O/S.
Have been using mint 11 for past few weeks with no problem but failed to boot correctly. menu appeared giving options for booting but kept returning to this menu without going further so I opted to go for safe booting option, after loading a few files it asked for password but kept giving me the message incorrect password so I could get no further. Fortunately I had a cop of clonezilla and was able to restore a backup from a second hard drive but would be grateful for any observations anyone would like to make about this (in case it happens again)
View 3 Replies View RelatedI used Ping Linux 8 months ago to create a ghost-like image of my primary partition. (Windows 7 on NTFS) The image is on the second partition of my hard drive (Western Digital 250 gig). I need to restore now, but Ping is unable to mount the volume. In fact, it will not mount any volume or perform any new backup. I made sure nothing has changed in Bios options since I created the backup. Does this imply that is not the appropriate tool to work on NTFS system?
View 4 Replies View RelatedMy manager at work asked me to setup an FTP server running LINUX. i had a post about some custom scripts and commands that i needed, so after i configured and set everything up, i got another assignment....here we go, i need to come up with a way of backing up the entire system, or creating a script that will setup,install and configure the FTP related features i have made working there.i am wondering what would be the most ideal/best and easy to do way to back up the system? the goal is : in case if HDD fails,r anything goes wrong.system can be restored in no time. this is still up in air thing, i offered taking some time on a weekend and setting up same system on say,ew drive, and swapping them when one goes bad... but what would be an alternatives
View 2 Replies View RelatedSo I've finally given up on saving my kubuntu install that wont boot. I've searched, and looked, but couldn't find a thing.My delema now is to make sure that I:
a) get all of the user data safely packed up onto my external USB drive. I believe it's all in the home directory. I'm not sure about getting hidden files though...
b) get the new install to go smoothly, and not mess up grub or the parralell XP install on the same hard drive.
c) get the user data back on the computer and recreate the user structure. Permissions were messed up already, so setting those up again is not an issue.
So, I've been poking around, and this is how I think things should go:
a) tar cvpjf backup.tar.bz2 /home to get my home directory backed up. Not exactly sure how to get from here to my external hd, but I'm sure I can figure it out
b) just run a live cd of kubuntu, delete the old partitions, and reinstall over them?
c) unzip the tar into by /home directory.
That's all I've been able to find so far. How do I set up the users? Will they show up as soon as I untar? Will the resinstall play nice with my windows install? Will I get all the hidden files too? Is there anything I'm missing?
Image Hard drive Ubuntu Operating system 9.10 Complete back up and restore. Changing over Hard Drives need a complete back up not just save files. So the image can be restored on any hard drive that restores the computer to its original state before it was imaged.
View 14 Replies View Relatedi am new to linux and i nid a bash script to Delete selected backup files and also restore selected backup file to a user define directory.
View 3 Replies View Relatedi am in need of linux help. iam at college and i need this back/restore script to pass this final part of an assessment. i require a backup script that will not only backup but also restore files to the relevent directories. e.g. users are instructed to store all wordprocessor files in a directory named wp. so i am needing to create a backup directory and 3 directories within that and some files within the 3 directories and then back them up ot restore them. l know i should/have to do this myself by been trying to get/understand info for the last few days and came up with zero.
View 14 Replies View RelatedOne Laptop. One hard drive. Two OS's. Windows 7 is shot to hell from installing and uninstalling to much crap. Windows & WILL rewrite my MBR. How do I back up my far superior GRUB MBR and restore it over the wincrap MBR once I am done reinstalling Windoze?
View 6 Replies View RelatedHow to take Backup & how to do restore in GnuCash. I need to take backup of my all accounts & all transactions
View 1 Replies View RelatedIm running ubuntu 10.04 and I recently had a little adventure whilst trying to disable KMS and deleted all the stuff out of the # kopt line and added the nomodeset thing.Now I crash to easybox everytime I try to boot, how do I restore the backup of said file that I noticed beside it in the folder. Also I saved one to my desktop.
View 7 Replies View Relatedhow to take tar backup and restore in mysql,Iam new to mysql,i searched in google but i did not get the exact one.
View 4 Replies View RelatedDo You have any good script to backup and restore Subversion ?
View 1 Replies View RelatedI have 4 different servers with exactly the same hardware. I set up one of them to have a centos install with all the basic stuff I'd like running on each one. I then created an image of the harddrive with the operating system, and stored it on an external drive. I used dd to copy the external image to one of the new machines. It worked fine, everything booted up as normal and with a few tweaks everything was great. The problem is that the drive is rather large (500gb) and it takes days for dd to copy it over. I decided to try a different route, I booted to a usb (using the linux distro on the ultimate boot cd pre-loaded with gparted). There are two partitions on the external drive, a small (100mb) partition which can easily be copied over with gparted, and the larger 480+gb lvm partition.
Gparted doesn't support lvm, so I used fdisk to create a new lvm partition on the new machine, and then pvcreate/vgcreate/lvcreate to re-create the same volume groups/logical volumes that are in the image on the external harddrive. I rsync'ed all the information over from LogVol00, and made the same swap partition LogVol01 (which took WAY less time). I disconnected the hard drive and renamed the volume group to VolGroup00 (initiall I named it differently, since linux doesn't like having the volume groups named the same). I can mount the LogVol00 partition and see all the files as they should be. But when I try and boot up, it doesn't even go to grub, I just end up with a blank screen and blinking cursor. How to make the drive bootable? Alternatively, a better strategy than using dd to restore this image??
I have Lenovo IdeaPad z510 laptop.My HDD SMART status is currently "failure". As my laptop is under warranty I can return it to lenovo. So I want to backup as much data as possible (everything is readable). I currently have 3 operating systems: linux xubuntu 14.10, debian 8 and windows 8.1 (triple-boot?). I want to back up only my current debian installation. There are 3 partitions for debian: root (about 50GB), home (>200GB) and swap. I know that I can backup the whole partition using:
Code: Select alldd -if=/dev/sdaX -of=/locaton/of/backup -something
And create .tar file with the whole home directory.
how to restore it later. In /etc/fstab there are references to UUIDs, and as I understand, with new HDD these UUIDs would be different. And possibly the whole partition table would be different. And how would I restore GRUB?I can't make full image of my disk simply because I don't have disk to store it on.Is it possible to create backup on my current debian installation without actually making full HDD backup? Would it work if I would install debian on new disk, then from LiveCD overwrite it with my backup and modify /etc/fstab to match new partitions?
My laptop is Windows XP Fedora 11 dual boot. I am replacing it because of a defect. The original laptop is fairly new so I could simply start from scratch and setup everything again. But I was thinking there might be a way to do an image backup and restore. My new laptop will be identical to the old one
View 1 Replies View RelatedI have fedora 12 (amd64) on desktop. I was wondering if there a way to backup and restore all my downloaded updates since installation?! In the same manner that debian has aptoncd. I am planning to migrate on all data to a new partition with clean install and then just move the updates there.
View 6 Replies View RelatedI do regular full and incremental backups using dar. All disk volumes are labeled and mounted by label. There is no other operating system installed. I built a new system but due to having to RMA a disk, I built the openSUSE system on a disk from the backup cycle. This Maxstor disk has problems which is why it was moved into an external box and the backup system. I now have a replacement disk and wish to replace the Maxstor before it dies. I initially tried a disk to disk clone with clonezilla but this died complaining that a small target partition was smaller than the source partition. It had created the partition and the start and end sectors were identical. There are no problems with the new disk.
I decided that it would be a good opportunity to test a full system disk restore from the backups. I have in the past restored individual files and partitions but have never restored onto a bare boot disk. I have restored and labeled all 6 partitions. The partition containing / has been marked as active. /boot is included in the partition containing /. fstab is valid, menu.lst is valid, device.map needs editing but this is not a problem.
What do I need to do to make this disk bootable. I have looked through the GRUB documentation but if you try some standard GRUB commands in 11.3 you get messages saying don't do this use YAST. I have seen other suggestions ranging from trying to start the not supported system repair option to using dd to copy the MBR which seemed to trash the partitions in the users extended partition.
The YAST bootloader displays "boot from the root partition". I assume that this is currently what is happening rather than what YAST thinks might be a good idea for next time. I suspect that all I have to do is dd the first 512 bytes of the root partition. If this is the case I can add this to the backup process. While I automate backups I do not automate restores. Each restore tends to be different and I am not sure of the best way getting grub to work on a bare disk restore.
I'm using ubuntu for a few weeks now and i created a backup script that can copy some folders into a .tgz file. Now i want to place back the folders to where they come from and overwrite the original folder. like the /home folder in the .tgz file overwrite the /home folder on my harddrive. I already tried to do this with: tar xvpfz filename.tgz. But after that the folders came in the same folders as the backupfile stands.
How can i do this the right way?
How to Backup & Restore Installed copy of my UBUNTU 10.10.If I create any ISO or Recovery CD /DVD, saves time to fresh install & update & install favorable software.I use Mobile to connect, works slow to download.
View 3 Replies View RelatedI'm trying to use this tutorial (URL...) to backup my Ubuntu 10.10 (ext3) operating system. I've successfully gotten it into a TAR file on my external hard-drive, but inside the archive are 2 folders: sda5 and media (/media/sda5/), sda5 ofcourse containing my operating system.
I run VMWare as my virtual machine software, but I could easily run Virtual Box if the situation calls for it. On my virtual machine I created an Extended partition, made a 2GB swap space and the rest is ext3 (ext3 space is mounted as sda1) (at this point, Swap is OFF) here is what I've tried to do inside the virtual machine to restore:
Code:
sudo -s
mkdir /media/FROM/
mkdir /media/TO/
mount /dev/sdb1 /media/FROM/
[Code]...
but instead it just creates the directory sda5 under media of the live ubuntu cd Do I need to CHRoot in these conditions? AFTER I get the files successfully into the virtual machine, how do I go about restoring the grub2 bootloader? Right now I haven't tried to restore grub on my hardware, but I would be interested in doing so. There are a vast immense amount of forum posts about this subject, but all are to mixed results. Can anybody tell me the absolute definite way to restore grub2 successfully, I don't want to try something if it's going to mess up my install, whether I've backed up or not.
for further reference, here is a link to the previous (failed) thread I made about this same subject:
[URL]...
I have an encrypted volume, which contains LVM volume group with volumes. I have unencrypted /boot and the rest is on that encrypted lvm. I have a backup I want to revert to, but that backup has a different kernel, and I don't know how to update the /boot since I have suspicions that the system won't boot if I just restore / . I think I need to run update-initramfs and grub-install at some point..
View 9 Replies View RelatedI have requirement on shell scriptingre scripts for the following:
1) Full backup(application and DB): tar all the files and database and copy them in the backup server
2) Incremental back up of files: backup of all the updated filester the last backup.
3) Restoring of backup files: restore the backup files from the backup server to the application server.
my old 80gb pata HD showed a dual boot Ubuntu - XP on startup, although ubuntu never worked, onlly XP booted.
Recently I tried to Restore a Macrium backup on one of its two partitions, & spoiled something.
On boot up it says:-
GRUB loading stage 1.5
GRUB loading please waite.....
Error 22
I tried to reinstall Ubuntu 10.8 with no success, & also XP with "R" for repair again with no success.
writting shell scripts,i searched in google but could not get the exact,pls can anyone help how to take mysql backup & restore using shell scripts.
View 3 Replies View Relatedthis message is a bit long but I've been pulling my hair for 2 days now. I am installing Centos 5.3 on a Dell Powerege R610, x86_64 flavour. That part goes well. next is testing backup & restore. I've tried MondoArchive, that I used on other OS, but it fails to remount the LVM correctly, and disk formatting fails. Now, I am trying another way: boot with centos 5.3 i386 live cd, take the disks online, cpio to a usb file everything but: /tmp /proc /boot /dev /etc/fstab /etc/mtab
then, reinstall a fresh centos to erase the disk (crash simulation) and to simulate the initial restore I would do after a crash. From there, I go again with the livecd, mount r/w the logical volume, cpio -i all my files, and reboot. It sort of goes well. system reboots correctly - it loads all my drivers (even asterisk & dahdi and the T1/E1 card light goes green...), starts KDE, but from there I get an infamous error message preventing me to log in "Your session only lasted less than 10 seconds" - looking in the details, i get this message "could not exe /etc/X11/xinit/XSession default' - but I dont think X11 has so much to do with it...
When I go to a text console (ctrl alt f1), and try to log, no luck either - and no time to see why. I've modified initrd to level 1 - there I get the single user prompt, that's ok - but init 3 brings me to a screen where I cant log (either with root or a user) - there is a clear difference between an incorrect password and a failed login - the later, as soon as I enter the password, I return to a login prompt Now my questions. 1/ how can I make a "system backup" of Centos 5.3 x64 -ie after a crash, I want an image tha t I will restore and bring back OS + Applications (data can be backed up separately) 2/ what is wrong with my restore thru livecd ? why cant I log into the system ?
[Code]..
We have a linux server (centos 5.2 final), with postfix smtp server, webmin, usermin and sugar crm
We need to backup all the data, and then perform a restore on a clean machine, without any OS installed yet.
I look into many pages that says that doing a backup on linux it's as easy as pack all the files in a .TAR file. Unpacking the tar will restore the system to it's original state. Also, i'm confused because if we perform a backup and mysql has active connections, perhaps the database would be inconsistent or corrupted. In the restore step, do i need a live CD in order to boot up linux command prompt? �Can it be from any linux version, or only centos version?
