I logged on my VPS via Putty
It is a snapshot : http://www.yanglihao.com/filesUploaded/linux_vnc.jpg
linux_vnc.jpg
How to solve the strouble? I will tell you the password if you want to log on the VPS.
When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
I know similar questions have been asked but I could find an answer to my exact question. Especially in anything like laymans terms. So when I try to start my iMac G4 running linux it starts, runs lines of code, flashes black then back to code several times then "Failed to start the X server.... output to diagnose the problem..." When I click yes here is what I get:
"Caught signal 11. Sever aborting.
In the mean time codes like the following appear on the side of the screen :
[ 477.501334] eth1: switching to forced 10bt
[ 497.901209] eth1: switching to forced 100bt
and so on.
What do I do?
I'm getting this error message every time I run updates.
Quote:
dpkg: dependency problems prevent configuration of postgresql:
postgresql depends on postgresql-8.4; however:
Package postgresql-8.4 is not configured yet.
dpkg: error processing postgresql (--configure):
[code]....
The following details are provided:
E: postgresql-8.4: subprocess installed post-installation script returned error exit status 1
E: postgresql: dependency problems - leaving unconfigured
I have SUSE Linux Enterprise Desktop 10 running on HP Mini 2133. It's been working like a dream since I got it, but one day I got the following error message when booting it: Failed to start the X server (your graphical interface). It is likely that it is not set up correctly. Would you like to view the X server output to diagnose problem? <Yes> <No>.
X server output says alot of things, but I think this is the most important:
(==)Using config file: "/etc/X11/xorg.conf"
ACPI: OSPMOpen Called
ACPI: Opening device
(EE) VIA(0): No valid modes found
I then get the login:. I'm able to login, but I have no clue on what to do. How can I fix this?
Few days ago we had a server maintenance. The system was shutdown, we fix the CPU fan, and start the system again. But somehow when the system starts, our IMAP server - dovecot is not running. It just sit like a rock. Because the machine had a CPanel/WHM, I tried to restart dovecot using cpanel and got a message:
Code:
That was not really useful....
When I tried to restart dovecot using command line, I got nothing. really nothing.
Code:
How to find out what happens to my IMAP/dovecot? And anyway to make it run again?
I'm using CentOS 5.5 X64 with dovecot 1.2.16
i am using RHEL5 at VirtualBox,at the time of installation i did create two partition one for / and another for swap.Now my /var directory is taking too much space and i decided to create a new partition with required size and mount that partition to /var.Now http service wont start and i did not reboot yet.
View 8 Replies View RelatedI got CentOS 5.4 with LAMP. Installed Plesk, tried to configure it, and then error - Quote:Unable to restart Named: dnsmng failed: dnsmng failed: dnsmng: Service /etc/init.d/named failed to restart
View 7 Replies View RelatedI installed Red-hat 5.3. Problem is that it is not showing graphical interface. Only kernel / command prompt is available. I tried startx, then I got this msg. No video BIOS modes for chosen depth. Also showing that:
ERROR: Failed to start X server.
There is a nice server that I want to install Redhat 5, update 5 on. I downloaded, from Oracle edelivery, the Linux 64 bit, Redhat 5, Update 5, and wrote it to bootable CD.
"V20658-01.zip","611558646","0C35737CD35BC26C212D205DF064CE2A","D0C7EF7CFF9635FECFDDB6BB724B1523851C1733","O racle Linux Release 5 Update 5 for x86_64 (64 Bit) - CD 1 of 6" and the other 6 CDs. However, when I went to test the install, I saw the messages:
Probing for video card: ATI Technologies ES1000
Failed to start X server.
Attempting to start VESA X. Failed.
[code]....
This is very odd, for a few reasons:
- the card is a few years old, and the distribution is new.
- Windows finds the correct information for this card, that it is an Nvidea card.
- A different simpler card gave the same error message (NVidea GEForce 6800)
Before to describe my problem I want to say that I searched a lot on the internet and I think I tried all the solutions provided by other users to similar problems.
I've got an IBM xSeries 346 server running CentOS 5.5 with all updates applied with yum.
The video card is an ATI Radeon (lspci says: 01:06.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]).
Everything worked fine until a bad day where there was an environmental power failure and the server crashed.
I turned it on, I manually check the file system, some files went lost and after the reboot the X server didn't start.
After the first boot I had problem with /etc/rc.d/rc.sysinit, sbin/multipath.static and /dev/cpu/microcode, I solved them and now the message it shows is:
"Failed to start the X server (your graphical interface) It is likely that it is not set up correctly. Would you like to view the X server output to diagnose the problem?"
I choose OK and it appears an empty log, if I go in /var/log/gdm and I do an ls -al:
total 0
-rw-r--r-- 1 root root 0 Oct 28 04:44 :0.log.4
-rw-r--r-- 1 root root 0 Oct 28 04:44 :0.log.3
-rw-r--r-- 1 root root 0 Oct 29 04:52 :0.log.2
-rw-r--r-- 1 root root 0 Oct 29 04:52 :0.log.1
-rw-r--r-- 1 root root 0 Oct 29 04:52 :0.log
So a lot of empty log files.
I press enter on the OK that appears at the bottom of the screen and it says: Would you like to try to configure the X server?
I choose Yes, I enter the root password and appears the following messages:
Couldn't start X server on card 0
Couldn't start X server with old config, trying with a fresh configuration
Then another messages:
Trying to restart the X server, I press enter on OK and it loops the initial message ("Failed to start the X server...)
i have some problems to start my dovecot server. I tried to install it from webmin using "un-used modules" but it was allways the same error: "E: Unable to locate package dovecot-pop3d".When I tried to install it from console using the commands: apt-get install dovecot-imapd dovecot-pop3d dovecot-common - and there are no problems with dovecot-imapd and dovecot-common, but still the same error with dovecot-pop3d. After command: service dovecot status: could not access PID file for dovecot ... failed!
After try to start dovecot with comand "dovecot": Error: mail_executable: Can't use /usr/lib/dovecot/pop3: No such file or directoryFatal: Invalid configuration in /etc/dovecot/dovecot.confI've read a few similar threads in this forum about dovecot errors but still can't to fix it.
I meet this problem after i reformat the CentOS 5...I havent do any configuration, the named service start failed ? why ....
View 2 Replies View RelatedI have an older computer and I did a fresh install of Jessie
Procesor AMD, Graphic card ATI Radeon 9200 PRO / RV280
After instalation my computer boot into black screen. I have no problems with wheezy.
I installed manually firmware-linux-nonfree (in case) module R200_cp is loading correctly.
When I configure Xorg, my log file says something like that:
-----------------------------------------------------------------------------------
(EE) Segmentation fault at address 0x0
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
--------------------------------------------------------------------------
When I want to start nfs services ,I get this error, Starting NFS daemon: [FAILED]
View 1 Replies View Relatedi have successfully installed linux 5.1.but there is problem to get x server.so i did not switch to graphical environment.errori is so "failed to start x server"
View 4 Replies View RelatedI got this error for two days.back then I googled this error and i got some information about log file in /var/log/syslog but i couldn't find it in google at all. this is all i got from syslog . look at the red paragraph
[Code]....
I'm trying to setup a VM and this is the error I'm getting
Failed to start the VM
I was working on my Drupal test site (running Fedora 11) when it froze. I had to hold down the power button to get it to shut off. When I booted back up, I received the error message "Your system had a kernel failure" after logging in. When I tried to access my test site's ip address or 127.0.0.1, I get the error message "unable to connect". However, I can access and log into Webmin (version 1.440) at 127.0.0.1:10000. Then I noticed that my Apache Web Server (Apache version 2.2.15) was not started. When I try to start it, I get the error message:"Failed to start apache. I'm using Fedora 11, Drupal 6.2 and Apache version 2.2.15.
View 1 Replies View RelatedI am thrown in at the deep end and I am trying to get xvfb running but feel like I am doing a driving test blindfolded after a bottle of vodka when I go through the stuff google throws out when I search for help. I get the message when I try xvfb-run xvfb failed to start. I simply don't know where to start trouble shooting as I can't find or create an error log. I am using an aws systen and need it to keep running in the background so that I can use cutycapt, which is the main reason I have to work with it. I am on i386 with ubuntu maverick 10.10. I have installed the fonts and dependent software I think.
View 7 Replies View RelatedI installed tor with this :-
Code:
sudo apt-get install tor
And After installation, When I ran from vidalia , it gave me error :-
[code]....
For some weird reason dhcpd fails to startup, but when I installed gadmin's dhcpd GUI configuration tool and click activate to start the DHCP server. It works, but for some reason I can't get it to start like a regular service. (Service dhcpd start) Fails without a error code or message.
View 14 Replies View RelatedOn my server Linux Redhat i want to configure dhcp server but when i check the dhcp status the dhcpd was stopped and i try to invoked or to start it failed. Even when open the graphical mode service configuration, check the box and click start the output error message is dhcp failed. the error: Starting dhcpd:Failed.
How would i start the dhcpd service to run
I've been trying to get my internal microphone to work in F12, and as part of the things I've tried I had the seemingly bad idea of reinstalling pulseaudio. The problem now is that pulseaudio fails to start... The following is from /var/log/messages, and is repeated several times:Code:Nov 24 08:51:20 localhost pulseaudio[6300]: main.c: Daemon startup without any loaded modules, refusing to work.
View 9 Replies View RelatedI have fedora 12 32 bits installed on a Macbook pro (intel core duo) I did "yum update" this morning, I have restarted the system and got the following message:Starting abrt daemon: abrtd: Failed to start: got sig 2 FAILEDI have browsed in the web but I cannot find useful information. Then I typed:$rpm -qa | grep abrt
abrt-libs-1.0.0-1.fc12.i686
abrt-libs-1.0.3-1.fc12.i686
abrt-addon-kerneloops-1.0.3-1.fc12.i686
[code]...
I using Fedora 12. When I am going to start MySQL server then error is come
MySQL Daemon failed to start.
Starting MySQL: [FAILED]
MySQL Details :
mysql-5.1.42-2.fc12.i686
I rebuilt my box with Fedora 14. installed httpd, mysql php etc. when I tried to start my httpd it was giving me error about finding the root document and server name I was able to fix temp the issue with the name by placing ServerName 192.168.1.105:80 in the httpd.conf file and the root document somehow was fixed also. but I am still can't start the httpd and no error message except that it failed. I also disabled Selinix but still no luck.
View 11 Replies View RelatedI can not start fedora 15 because i take this message:HTML Code:Starting udev wait for complete device initialization failed, see ' system ctl status udev-settle.service for details
View 2 Replies View RelatedJust completed the upgrade to 10.04 from 8.04, and ironing out the wrinkles. Since the upgrade, I'm not able to establish a VPN connection to my institute (a problem since outgoing mail REQUIRES a VPN connection) The pull down menu shows the connection as an option, but clicking on it brings up a separate window that simply says "The VPN connection CfA failed because the VPN Service failed to start." Never had this issue under Hardy, so not sure what's going on. Under "Configure VPN" the settings look the same as they always did.
View 7 Replies View Relatedwhen i started bind9, it showed me this error, Can anyone help me in this, according to me i dont have a file sysklogd so i can not restart that. that is why i think iam getting error while starting bind9. How to get that file and how to get started Bind9.
View 4 Replies View Related
