For some weird reason dhcpd fails to startup, but when I installed gadmin's dhcpd GUI configuration tool and click activate to start the DHCP server. It works, but for some reason I can't get it to start like a regular service. (Service dhcpd start) Fails without a error code or message.
View 14 RepliesI just got the problem while starting the dhcp daemon. Its showing failed. I need to start it for my clients to be autoinstalled. I am having CentOS 5.2 linux. I've installed all optional packages also while installing CentOS. How to start the dhcp daemon? I've tried the /etc/init.d/dhcpd start also. But it didnt work. Showing Failed.
View 1 Replies View RelatedOn my local network, I use my Linux machine running dhcpd and IP masquerade as a gateway to the internet. As it is, the setup works just fine, and I've enabled dhcpd in all runlevels in the services dialog, but for some reason, it still does not automatically start when I boot the machine. If I select it and click "Start", it operates normally, and if I run "services dhcpd start" from a command line, that works too. My only guess is that it's some problem with my config file... it's the same setup I used with previous versions of Fedora without issues, but maybe things have changed?
The contents of /etc/dhcp/dhcpd.conf:
Code:
ddns-update-style interim;
ignore client-updates;
subnet 192.168.1.0 netmask 255.255.255.0 {
option routers 192.168.1.8;
option subnet-mask 255.255.255.0;
option domain-name-servers 64.59.176.13, 64.59.176.15, 64.59.177.226;
option ip-forwarding off;
range dynamic-bootp 192.168.1.100 192.168.1.200;
default-lease-time 21600;
max-lease-time 43200; }
On my server Linux Redhat i want to configure dhcp server but when i check the dhcp status the dhcpd was stopped and i try to invoked or to start it failed. Even when open the graphical mode service configuration, check the box and click start the output error message is dhcp failed. the error: Starting dhcpd:Failed.
How would i start the dhcpd service to run
I am not able to start mysql server...when i type command sevice mysqld start it saysMySQL Daemon failed to start.Starting mysqld: [FAILED]so how to solve this problem ?
View 10 Replies View RelatedTrying to run Cluster to use GFS over iSCSI, but get fencing error.
Here is what I do:
1. edit /etc/hosts code...
I installed dhcpd using:
Code:
Now when I try to run it, I get this weird error:
Code:
The error was:
I changed permissions to 777:
Code:
To no avail!
It's got something to do with AppArmor.
I don't think it is installed on this system:
Code:
I am trying to install dhcpd on my Fedora 13 VM. I'm using VirtualBox and I installed using the i686 image. I did yum update and everything was fine. When I do yum install dhcpd , I get the following error.
Quote:
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
No package dhcpd available.
Nothing to do
I also tried yum clean to clear cache but that didn't help either. I installed Fedora 12 in a different VM and tried but with no luck. Also tried installing using i386 DVD but same error. I should also mention that what I'm trying to do is that I'm trying to set up a relay agent on my Fedora gateway.
Is there a way to use dhcpd to assign vpn clients their IP and configuration?
I'd like to have dhcpd listen on br0 (already set as 10.0.0.1) so that devices conecting through eth1 and tap0 (should I be using tun?) will get the same address pool.
I would like to send a specific option 15, domain-name, to a few clients on a network from a specific manufacturer. Usually all clients [URL] from the DHCP server, but when a client with mac address bellonging to manufaturer A asks for an IP address I would like to give them [URL] How would I go about doing this? Feels like it should be possible but I am not sure how.. I remember doing something similar in a microsoft DHCP server using vendor-identifier and passing out a vendow-specific option.
Quote:
class "xxx" {
match if substring (hardware, 1, 3) = 00:00:10;
option domain-name "yes.this.works.com";
}
/Carl
I have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.
The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)
ifconfig shows:
Code:
The interface has a fixed IP setup.
My dhcp.conf file looks like this:
Code:
When I start (try to) dhcpd via the service interface or via the prompt as
Code: service dhcpd start
I get an [FAILED] message and the following is in /var/log/messages
Code:
But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:
Code:
and /var/log/messages shows:
Code:
Why does the system ask a declaration for eth0 0.0.0.0?
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
The problem is that I have set up a test installation with DHCP server and DNS server on Fedora 14 and want to set up dynamic updates from the DHCPD to the NAMED. The problem is that any attempts to make updates of the DNS server fails with a "SERVFAIL" error. I can not even update it through the NSUPDATE tool. This is NAMED.CONF:
Code:
options {
directory "/var/named";
[code]....
i have installed dhcp server on RHEL5.after instalation when i want to restart it.it shows failed message. rpm package is also installed.(dhcp-3.0.5-13.el5) dhcpd.conf file is also in /etc directory
View 1 Replies View Relatedi have to define new dhcpd options to provide data for a pxe winpe boot. So these options will be under a bootstrap session. This doesn't work.
option ff code 145 = text;
option ff "test";
option sitepxe code 138 = text;
option sitepxe "test";
option clienthostname code 139 = text;
option clientMAC code 140 = text;
option bcdmenu code 252 = text;
In a wireshark capture i can't see the new options in the DHCPACK packet. ISC-DHCP is always restarted when the conf file is updated.
My box is centos 5.3 x86. At booting, ipsec_setup messages are coming as attached picture.
And dhcpd also comes "failed".
when i started bind9, it showed me this error, Can anyone help me in this, according to me i dont have a file sysklogd so i can not restart that. that is why i think iam getting error while starting bind9. How to get that file and how to get started Bind9.
View 4 Replies View RelatedHow can I start dhcpd after Network manager has set up a new connected device. The reason being that dhcpd will not start when there is nothing connected to the network interface. Therefore I would like dhcpd to start after a new device is connected. Now I have found references if ifup-post but this does not relate to NM, is this correct?
View 5 Replies View RelatedMy dhcpd service get failed every time when I try to start it
1) Actually I have a lan connection which has a static ip network 192.168.10.0/24 and the pc to which is using the dhcpd has a ip address 192.168.10.1/24
2) And I have a internet connection wirelessly which has a network 192.168.2.0/24
Now I want to problem ip address in the network of 192.168.10.0/24
Here below is the configuration file of dhcp server:
# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;
# Use this to enble / disable dynamic dns updates globally.
#ddns-update-style none; .....
Just for information in case if it is important to start dhcpd and named: Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable
Secondly Both config files in /etc/sysconfig set parameters to start in jail root but
[Code]....
I've found a lot of pages of how to fix the issue on older releases of dhcpd and ubuntu.
#>dhcpd
#> ...
#> Can't create PID file /var/run/dhcpd.pid: Permission denied.
I have tried creating the file and giving it permissions to be accessed, but that isn't solving the issue. I tried to go through some of the older fixes, and one was really close to working but lacked the same folders as I have.
EDIT: one solution that worked was to use ln -s /var/run/dhcp3-server/dhcpd.pid /var/run/dhcpd.pid dhcpd3 -cf /etc/dhcp3/dhcpd.conf at0
I'm having trouble getting dhcpd to update DNS records in bind9. I'm not seeing any journal files created for bind9. The following appears in syslog when a client machine connects to the network:
Code:
Jun 26 04:07:22 ubuntu dhcpd: DHCPDISCOVER from 00:23:df:44:78:83 via eth0
Jun 26 04:07:23 ubuntu dhcpd: DHCPOFFER on 10.0.0.112 to 00:23:df:44:78:83 (Computer1) via
[code]....
I was working on my Drupal test site (running Fedora 11) when it froze. I had to hold down the power button to get it to shut off. When I booted back up, I received the error message "Your system had a kernel failure" after logging in. When I tried to access my test site's ip address or 127.0.0.1, I get the error message "unable to connect". However, I can access and log into Webmin (version 1.440) at 127.0.0.1:10000. Then I noticed that my Apache Web Server (Apache version 2.2.15) was not started. When I try to start it, I get the error message:"Failed to start apache. I'm using Fedora 11, Drupal 6.2 and Apache version 2.2.15.
View 1 Replies View RelatedI've been trying to get my internal microphone to work in F12, and as part of the things I've tried I had the seemingly bad idea of reinstalling pulseaudio. The problem now is that pulseaudio fails to start... The following is from /var/log/messages, and is repeated several times:Code:Nov 24 08:51:20 localhost pulseaudio[6300]: main.c: Daemon startup without any loaded modules, refusing to work.
View 9 Replies View RelatedI have fedora 12 32 bits installed on a Macbook pro (intel core duo) I did "yum update" this morning, I have restarted the system and got the following message:Starting abrt daemon: abrtd: Failed to start: got sig 2 FAILEDI have browsed in the web but I cannot find useful information. Then I typed:$rpm -qa | grep abrt
abrt-libs-1.0.0-1.fc12.i686
abrt-libs-1.0.3-1.fc12.i686
abrt-addon-kerneloops-1.0.3-1.fc12.i686
[code]...
I using Fedora 12. When I am going to start MySQL server then error is come
MySQL Daemon failed to start.
Starting MySQL: [FAILED]
MySQL Details :
mysql-5.1.42-2.fc12.i686
I rebuilt my box with Fedora 14. installed httpd, mysql php etc. when I tried to start my httpd it was giving me error about finding the root document and server name I was able to fix temp the issue with the name by placing ServerName 192.168.1.105:80 in the httpd.conf file and the root document somehow was fixed also. but I am still can't start the httpd and no error message except that it failed. I also disabled Selinix but still no luck.
View 11 Replies View RelatedI can not start fedora 15 because i take this message:HTML Code:Starting udev wait for complete device initialization failed, see ' system ctl status udev-settle.service for details
View 2 Replies View Relatedafter upgrading VirtualBox from 3.0.x to VirtualBox-OSE-3.1.2-1.fc12.x86_64 VBox fails to start any virtual machine with error: Failed to open/create the internal network 'HostInterfaceNetworking-eth0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
When I run
sudo /etc/sysconfig/modules/VirtualBox-OSE.modules
I get
FATAL: Error inserting vboxnetflt (/lib/modules/2.6.31.12-174.2.19.fc12.x86_64/extra/VirtualBox-OSE/vboxnetflt.ko): Invalid module format
FATAL: Error inserting vboxnetadp (/lib/modules/2.6.31.12-174.2.19.fc12.x86_64/extra/VirtualBox-OSE/vboxnetadp.ko): Invalid module format
Kernel is (obviously) kernel-2.6.31.12-174.2.19.fc12.x86_64, but same thing happens with any installed kernel, IE kernel-rt-2.6.31.12-1.rt20.1.fc12.ccrma.x86_64
I reinstalled VBox and kmods got rebuilt but the problem persists.
I am having some problems installing Fedora 15 64-bit. I use the install DVD. I have an AMD Phenom and a NVidia 8600GTS. When I install using the normal method, my screen freezes somewhere in the settings screen for choosing the computer name. If I use the basic video driver for installing I have no problem. However after everything is installed, and Fedora starts, Gnome says that it failed to start and some features are not available.
I found some information at [URL] that I tried. However after installing kmod-nvidia and rebooting I no longer see any graphical display. A lot of text is on the screen without any error, but no x-windows appears. What can I do to install Fedora correctly and have a good working system? Is the 32-bit version easier to get it working? How can you recover from a system that does not start? What I could do to recover from it.