Hardware :: Failed To Start X Server - ATI Technologies ES1000
Jan 11, 2011
There is a nice server that I want to install Redhat 5, update 5 on. I downloaded, from Oracle edelivery, the Linux 64 bit, Redhat 5, Update 5, and wrote it to bootable CD.
"V20658-01.zip","611558646","0C35737CD35BC26C212D205DF064CE2A","D0C7EF7CFF9635FECFDDB6BB724B1523851C1733","O racle Linux Release 5 Update 5 for x86_64 (64 Bit) - CD 1 of 6" and the other 6 CDs. However, when I went to test the install, I saw the messages:
Probing for video card: ATI Technologies ES1000
Failed to start X server.
Attempting to start VESA X. Failed.
[code]....
This is very odd, for a few reasons:
- the card is a few years old, and the distribution is new.
- Windows finds the correct information for this card, that it is an Nvidea card.
- A different simpler card gave the same error message (NVidea GEForce 6800)
View 7 Replies
ADVERTISEMENT
Jun 29, 2011
When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
View 2 Replies
View Related
Sep 16, 2010
I know similar questions have been asked but I could find an answer to my exact question. Especially in anything like laymans terms. So when I try to start my iMac G4 running linux it starts, runs lines of code, flashes black then back to code several times then "Failed to start the X server.... output to diagnose the problem..." When I click yes here is what I get:
"Caught signal 11. Sever aborting.
In the mean time codes like the following appear on the side of the screen :
[ 477.501334] eth1: switching to forced 10bt
[ 497.901209] eth1: switching to forced 100bt
and so on.
What do I do?
View 14 Replies
View Related
Mar 12, 2010
I logged on my VPS via Putty
It is a snapshot : http://www.yanglihao.com/filesUploaded/linux_vnc.jpg
linux_vnc.jpg
How to solve the strouble? I will tell you the password if you want to log on the VPS.
View 1 Replies
View Related
Feb 12, 2010
I'm getting this error message every time I run updates.
Quote:
dpkg: dependency problems prevent configuration of postgresql:
postgresql depends on postgresql-8.4; however:
Package postgresql-8.4 is not configured yet.
dpkg: error processing postgresql (--configure):
[code]....
The following details are provided:
E: postgresql-8.4: subprocess installed post-installation script returned error exit status 1
E: postgresql: dependency problems - leaving unconfigured
View 6 Replies
View Related
Aug 13, 2010
I have SUSE Linux Enterprise Desktop 10 running on HP Mini 2133. It's been working like a dream since I got it, but one day I got the following error message when booting it: Failed to start the X server (your graphical interface). It is likely that it is not set up correctly. Would you like to view the X server output to diagnose problem? <Yes> <No>.
X server output says alot of things, but I think this is the most important:
(==)Using config file: "/etc/X11/xorg.conf"
ACPI: OSPMOpen Called
ACPI: Opening device
(EE) VIA(0): No valid modes found
I then get the login:. I'm able to login, but I have no clue on what to do. How can I fix this?
View 3 Replies
View Related
Mar 19, 2011
Few days ago we had a server maintenance. The system was shutdown, we fix the CPU fan, and start the system again. But somehow when the system starts, our IMAP server - dovecot is not running. It just sit like a rock. Because the machine had a CPanel/WHM, I tried to restart dovecot using cpanel and got a message:
Code:
That was not really useful....
When I tried to restart dovecot using command line, I got nothing. really nothing.
Code:
How to find out what happens to my IMAP/dovecot? And anyway to make it run again?
I'm using CentOS 5.5 X64 with dovecot 1.2.16
View 5 Replies
View Related
Mar 31, 2010
i am using RHEL5 at VirtualBox,at the time of installation i did create two partition one for / and another for swap.Now my /var directory is taking too much space and i decided to create a new partition with required size and mount that partition to /var.Now http service wont start and i did not reboot yet.
View 8 Replies
View Related
Apr 29, 2010
I got CentOS 5.4 with LAMP. Installed Plesk, tried to configure it, and then error - Quote:Unable to restart Named: dnsmng failed: dnsmng failed: dnsmng: Service /etc/init.d/named failed to restart
View 7 Replies
View Related
Mar 7, 2010
I installed Red-hat 5.3. Problem is that it is not showing graphical interface. Only kernel / command prompt is available. I tried startx, then I got this msg. No video BIOS modes for chosen depth. Also showing that:
ERROR: Failed to start X server.
View 2 Replies
View Related
Oct 29, 2010
Before to describe my problem I want to say that I searched a lot on the internet and I think I tried all the solutions provided by other users to similar problems.
I've got an IBM xSeries 346 server running CentOS 5.5 with all updates applied with yum.
The video card is an ATI Radeon (lspci says: 01:06.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]).
Everything worked fine until a bad day where there was an environmental power failure and the server crashed.
I turned it on, I manually check the file system, some files went lost and after the reboot the X server didn't start.
After the first boot I had problem with /etc/rc.d/rc.sysinit, sbin/multipath.static and /dev/cpu/microcode, I solved them and now the message it shows is:
"Failed to start the X server (your graphical interface) It is likely that it is not set up correctly. Would you like to view the X server output to diagnose the problem?"
I choose OK and it appears an empty log, if I go in /var/log/gdm and I do an ls -al:
total 0
-rw-r--r-- 1 root root 0 Oct 28 04:44 :0.log.4
-rw-r--r-- 1 root root 0 Oct 28 04:44 :0.log.3
-rw-r--r-- 1 root root 0 Oct 29 04:52 :0.log.2
-rw-r--r-- 1 root root 0 Oct 29 04:52 :0.log.1
-rw-r--r-- 1 root root 0 Oct 29 04:52 :0.log
So a lot of empty log files.
I press enter on the OK that appears at the bottom of the screen and it says: Would you like to try to configure the X server?
I choose Yes, I enter the root password and appears the following messages:
Couldn't start X server on card 0
Couldn't start X server with old config, trying with a fresh configuration
Then another messages:
Trying to restart the X server, I press enter on OK and it loops the initial message ("Failed to start the X server...)
View 1 Replies
View Related
May 13, 2011
i have some problems to start my dovecot server. I tried to install it from webmin using "un-used modules" but it was allways the same error: "E: Unable to locate package dovecot-pop3d".When I tried to install it from console using the commands: apt-get install dovecot-imapd dovecot-pop3d dovecot-common - and there are no problems with dovecot-imapd and dovecot-common, but still the same error with dovecot-pop3d. After command: service dovecot status: could not access PID file for dovecot ... failed!
After try to start dovecot with comand "dovecot": Error: mail_executable: Can't use /usr/lib/dovecot/pop3: No such file or directoryFatal: Invalid configuration in /etc/dovecot/dovecot.confI've read a few similar threads in this forum about dovecot errors but still can't to fix it.
View 4 Replies
View Related
Oct 12, 2010
I meet this problem after i reformat the CentOS 5...I havent do any configuration, the named service start failed ? why ....
View 2 Replies
View Related
May 4, 2015
I have an older computer and I did a fresh install of Jessie
Procesor AMD, Graphic card ATI Radeon 9200 PRO / RV280
After instalation my computer boot into black screen. I have no problems with wheezy.
I installed manually firmware-linux-nonfree (in case) module R200_cp is loading correctly.
When I configure Xorg, my log file says something like that:
-----------------------------------------------------------------------------------
(EE) Segmentation fault at address 0x0
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
--------------------------------------------------------------------------
View 14 Replies
View Related
Jun 23, 2011
I have upgraded my two boxes from FC6 to FC14 and I find a bit of a problem in configuring/ detecting monitor with IOGear with dual port.The resolution on one box is good but the other is very poor.The bad one contains ATI ES1000 video adapter and I searched drivers and posts, and finally no promising results.If I connect my Samsung monitor directly to the box then the resolution is good but it is very bad when I connect through IOGear.
I was also trying to configure monitor settings manually and to get to that I was trying to boot without X. This I could not succeed. I thought if I do init 3 and reboot the machine it would give me a terminal but I always get the desktop.
View 1 Replies
View Related
Aug 29, 2011
When I want to start nfs services ,I get this error, Starting NFS daemon: [FAILED]
View 1 Replies
View Related
May 3, 2011
i have successfully installed linux 5.1.but there is problem to get x server.so i did not switch to graphical environment.errori is so "failed to start x server"
View 4 Replies
View Related
Apr 8, 2011
I upgraded a HP Proliant server to openSUSE 11.4 (X86-64) with KDE, and I'm encountering various graphical problems. This machine's been running SUSE versions since 11.0 on similar hardware with few major issues, and I did the 'upgrade' by a new install keeping only /home partition intact. This Server has 10GB memory. It has a PCI ATI ES1000 with 64MB and uses the radeon driver. It boots up fine under the monitor's correct resolution of 1600*1000, but
1) It flickers one time each 4 of 5 seconds
2) during works more and more memory is used : starting at 9% and going up to 51% after 20 minutes and I receive then allocation error in /var/log/messages
[Code]...
View 9 Replies
View Related
Jun 3, 2011
I am looking for a driver down load for ATI Technologies INC 3D RAGE PRO AGP. I really need the driver for pc.
View 2 Replies
View Related
Aug 2, 2010
I was wondering if anyone else ran into and issue with 11.3 with an IBM x3650 server using the embedded graphics card. As a reference this exact machine was working under 11.2. I am aware that there were significant changed in how video works in 11.3.
While installing and during the initial start of the operating system I can see graphical output, OPEN SUSE logo and such.
During the boot process the screen goes blank. The server is still running and I am able to ssh to the machine, but there is no access to the console.
Below is a segment of the /var/log/boot.msg that shows some errors. I can provide more logs if that would assist in tracking this down.
I did a quick google search on ES1000 and i2c and saw the same errors reported with Ubuntu version but nothing for OPENSUSE. There seemed to be a bug that was fixed in that kernel.
<6>[ 2.277737] [drm] radeon: cp idle (0x00008080)
<6>[ 2.277767] [drm] Loading R100 Microcode
<6>[ 2.277770] platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
<6>[ 2.279454] [drm] radeon: ring at 0x00000000B0000000
<6>[ 2.279476] [drm] ring test succeeded in 1 usecs
code....
This is a new install and the machine is not yet in production so I have the option to experiment with it a bit.
View 4 Replies
View Related
Jul 18, 2011
Currently booting off a disc and I'm unable to connect to our home network. Do I need to update drivers for this particular card? The netbook I'm using is a 'Kogan' with an Atom N270 1.6Ghz processor.
View 9 Replies
View Related
Sep 22, 2010
I used the Assistive Technologies on screen keyboard because hotplug was not working and I could only use my bluetooth mouse. Now, even after disabling Assistive Technologies, the icon still appears in the apps toolbar, next to my network connection status icon and battery status icon, also next to the clock and date.
View 2 Replies
View Related
Dec 12, 2010
I got this error for two days.back then I googled this error and i got some information about log file in /var/log/syslog but i couldn't find it in google at all. this is all i got from syslog . look at the red paragraph
[Code]....
View 1 Replies
View Related
May 23, 2010
I have a ADS Technologies, Inc. DVD Xpress B see here and here. The product is disconitnued and followed by the DX2. Both devices have identical specs and everything. So I was hoping I could get ubuntu to work with it. So I tried using this driver.
It doesn't work so far. I tried changing the device usb info in the source so it includes this older device, but it doesn't work.
View 3 Replies
View Related
Jan 18, 2011
I have installed arch linux and try to do pulseaudio according to wiki. But pulseaudio doesn't detect my sound card. I don't have alsa installed. I run
Code:
pacmd list
and it shows that no card is available. Commands
Code:
$ fuser -v /dev/snd/*
$ fuser -v /dev/dsp
View 3 Replies
View Related
Jan 22, 2010
i have a intermitant problem with my ATI radeo 9550 .fgl_glxgears work once on two .
When it don't work in the kernel log I find :
Jan 20 20:14:43 debian64 kernel: [ 18.852383] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Jan 20 20:14:43 debian64 kernel: [ 18.882455] [fglrx] Maximum main memory to use for locked dma buffers: 1343 MBytes.
code....
View 2 Replies
View Related
Nov 21, 2010
I have problem with onboard ATI ES1000. Server details:
Supermicro X7SBI, Q6600, 8G ram. Centos 5.5 minimal installation, without X.
Problem is that with all kernel-xen x86_64 from current kernel-xen-2.6.18-194.26.1.el5.x86_64 back to kernel-xen-2.6.18-128.el5.x86_64 after kernel boots monitor goes blank and says "no video, going to power save".
Google finds similar problems and sugestions was to add "nomodeset". With this option monitor also blanks after kernel boot, but says "out of range". Other options to modify xorg.conf does not apply, becouse there is no X installed.
I try with multiple monitors, without success. This happens only with 64bit kernel-xen. All other 32 and 64 bit kernels and 32bit kernel-xen works fine, video is ok. This happens to 6 servers, all are same hardware, used as cluster. Installation with "linix text" allways is fine, video disappears after first reboot when standart kernel is booted. I also tryed with almost all possible "vga=xxxx" kernel options and none of them works.
What else to try?
# lspci
View 4 Replies
View Related
Mar 7, 2010
I'm trying to setup a VM and this is the error I'm getting
Failed to start the VM
View 5 Replies
View Related
Jul 7, 2011
I was working on my Drupal test site (running Fedora 11) when it froze. I had to hold down the power button to get it to shut off. When I booted back up, I received the error message "Your system had a kernel failure" after logging in. When I tried to access my test site's ip address or 127.0.0.1, I get the error message "unable to connect". However, I can access and log into Webmin (version 1.440) at 127.0.0.1:10000. Then I noticed that my Apache Web Server (Apache version 2.2.15) was not started. When I try to start it, I get the error message:"Failed to start apache. I'm using Fedora 11, Drupal 6.2 and Apache version 2.2.15.
View 1 Replies
View Related
Feb 27, 2011
I am thrown in at the deep end and I am trying to get xvfb running but feel like I am doing a driving test blindfolded after a bottle of vodka when I go through the stuff google throws out when I search for help. I get the message when I try xvfb-run xvfb failed to start. I simply don't know where to start trouble shooting as I can't find or create an error log. I am using an aws systen and need it to keep running in the background so that I can use cutycapt, which is the main reason I have to work with it. I am on i386 with ubuntu maverick 10.10. I have installed the fonts and dependent software I think.
View 7 Replies
View Related
