CentOS 5 :: Use Putty To Ssh From Windows Laptop To A Remote Machine?
Jun 25, 2010
I am using CentOs 5.5.
I use Putty to ssh from my windows laptop to a remote CentOS machine. Is there a way to start a shell that doesnt dies when I disconnect so I can connect again and reclaim it?
View 3 Replies
ADVERTISEMENT
May 15, 2010
I am trying to setup a putty session to putty from one Ubuntu machine to another. I know how to setup to connect to the machine from Windows and I am using the same settings for the one I am trying on the Ubuntu machine but it fails to connect. It fails immediately so I believe that putty is not able to find ssh. Is there some configuring that I need to do.
View 7 Replies
View Related
Jun 19, 2010
Like ssh for linux,is there any way to connect to remote windows machine.
View 3 Replies
View Related
Jan 20, 2010
i need to get file from a remote solaris,but i can't telnet or ftp it to directly i have to go via another solaris server ,it goes like this windowsbox-proxyserver-mainserver
View 8 Replies
View Related
Jun 24, 2011
I'm using Ubuntu 11.04. I have a Windows XP box in which I've installed SFU 3.5 and Interix (Subsystem for Unix-based Applications). I want to run a batch script on the Windows machine from my Linux box, whether on-demand or in a cron. How do I do this from the Linux side?
View 4 Replies
View Related
Apr 15, 2010
Can I do a fresh install of CentOS Linux on a remote machine? I have a machine with Windows NT in a remote location. Now I want to use that system as my deployment machine. To proceed with my plan I need to install a Linux OS (have chosen CentOS). The guy there with the machine is not very knowledgeable of the installation process of any OS. So I thought I could install CentOS remotely.how I can achieve this?
View 2 Replies
View Related
Oct 31, 2009
I have two machines, one has XP service pack2, second one has CentOS 5.3 (Linux), they are connected through crossover cable. I have configured everything fine but don't know why till now can't ping!
A. Windows machine settings as follows:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gatway: 192.168.1.1
+ Firewall is turned OFF.
B. For Linux machine, I will list everything stored in network files, logged as [root@localhost ~]# :
1. /etc/sysconfig/network:
ifconfig eth0 192.168.1.4 netmask 255.255.255.0 up
route add -net 192.168.1.0 netmask 255.255.255.0 eth0
route add default gw 192.168.1.1 eth0
NETWORKING = yes
NETWORKING_IPV6=no
HOSTNAME=localhost.localdomain
2. /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
IPADDR="192.168.1.4"
NETMASK="255.255.255.0"
ONBOOT="yes"
BOOTPROTO="yes"
3. /etc/resolv.conf
nameserver 192.168.1.4
search locadomain
4. I restarted network service using this command:
/etc/init.d/network start
everything is fine. When checking using ifconfig command. I get the following:
eth0 Link encap: Ethernet HWaddr 00:08:0D:EE:19:66
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr:........
[code]....
I mean I assigned the IP: 192.168.1.4 to Linux machine (Eth0). I did everything above and can't ping till now, when pinging from windows or Linux I get a message "destination host unreachable" restarted Linux many times but same result. NETWORK CABLE is working fine I tested it.
View 14 Replies
View Related
Sep 12, 2010
I set up a print server with a USB printer attached. I can remotely bring up CUPS and print a test page, but I would like to be able to add a printer in windows like I normally would. Add printer, network work printer and so on, but I am not sure how to implement this on Ubuntu server. Do I need to use IPP or do I have to share it out using Samba? Oh, my server does not have a graphical desktop, it is strictly console based.
View 1 Replies
View Related
Aug 11, 2011
There is a way to make a remote access from a Ubuntu Linux to a Windows 7 machine using RDP(Remote Desktop Protocol)? I use "mstsc.exe" for Windows to Windows connections. What is like "mstsc.exe" that I can easily run from Ubuntu?
View 1 Replies
View Related
Mar 1, 2010
I am accessing a remote DB using JDBC from inside a java program. is there any terminal command with which I can see the remote machine's ip/mac address?
View 1 Replies
View Related
Jan 26, 2011
I have installed CentOS 5.5 along with the Samba package. I have it configured (i believe), but when I try to access a share, it is not accepting my UN/PW. I have copied the smb.conf file from a working computer over to this one, but it is still not accepting my login. Anyone know of any other files I should check?
I have moved a working smb.conf file to this new box, and both computers have the same UN/PW's
View 4 Replies
View Related
Oct 22, 2010
I would like to setup a remote desktop for my Ubuntu computer so I can use my computer on a Windows computer that is on a different network. How can I do this?
View 1 Replies
View Related
Jun 8, 2011
I was looking for:how to access my Linux machine(OpenSuse 11.3) that is being hosted at my hoster company from my home Win Pc, I found TightVNC , but I am confused, should I install it on both systems ( viewer and server) ? .. what about the VirtualBox , can i Access with that tool or it is only for mounting the local Virtual Machines?
View 2 Replies
View Related
Feb 17, 2010
I've got an old p3 with 11 ide hard drives strapped to it for storage and I decided to throw Ubuntu server on it because it's more lightweight than a standard ubuntu install, and given it's a pentium 3 with 128mb of ram, lightweight is good. I installed, through putty (ssh), the gnome gui - then learned that putty only does cli (i was thrilled), so I've spend the last hour trying to figure out how to enable remote desktop.
I don't mind reinstalling to do what is necessary. remote desktop to manage file downloads from my windows 7 machine(s) big list, i know. history: this thing is/was my media server. I had xp on it, sharing all drives and watching hd movies off it, but then xp decided it did't want to boot anymore so here we are. I'm thinking of just putting ubuntu 8.04/8.10 on it and through its wonderful gui enabling remote desktop and using realvnc/tightvnc to access it
View 9 Replies
View Related
Dec 4, 2010
I have a Lenovo T500 laptop with 4 GB RAM. I have installed Windows 7 64bits OEM on my laptop HD. I also installed Fedora 14 on my USB External Hard Drive which it has it own boot sector. I don't want to have a dual boot. So if I plug in my external HD to my laptop and turns the machine on, it automatically my Fedora comes up, other wise my windows 7. (I set up start-up boot drive , first to USB External HD and then internal HD)
I installed KVM (Virtual Machine Manger) on my Fedora 14 and I am trying to install windows 7 64bits OEM on my Fedora 14 as Virtual Machine. After setting everything and start installing windows form CD, I got BLUE SCREEN right after "WINDOWS FILES LOADING..." finished. it shows me a blue screen and then it will stop
Questions:
1- How can I fix that problem?
2- Is ther way to make a Virtual Machine on my Fedora using my exiting installed windows 7 on my laptop HD?
View 2 Replies
View Related
Jun 27, 2011
Trying to set up a LAN with an FC14 laptop, FC15 PC and a Windows machine running XP. I have SAMBA installed on both FC machines, but neither of them can see shares on each other or the XP machine. I can ping between all of them. The Windows machine sees all of the SAMBA shares.
When I attempt to Connect to Server under Places on the FC15 PC, I do not have a Windows share option to choose from as I do on the laptop, suggesting smbclient isn't configured correctly on that machine. SMB, NMB and WINBIND are installed and activated on startup on both FC machines. Although I have the Windows share option on the FC14 laptop, it will only connect with the IP address.
Firewalls and SELinux on both machines are disabled. Here are some configuration details:
rpm -qa | grep samba
samba-3.5.8-68.fc15.1.x86_64
samba-winbind-3.5.8-68.fc15.1.x86_64
samba-swat-3.5.8-68.fc15.1.x86_64
system-config-samba-docs-1.0.9-2.fc15.noarch
samba-winbind-clients-3.5.8-68.fc15.1.x86_64
[Code]...
View 3 Replies
View Related
Apr 23, 2010
I am trying to remotely access a linux machine to run Cadence from my laptop.I downloaded Putty and Xming/XLaunch.I run Putty, enable X11 forwarding, then sign into my host address.I am successfully able to access and navigate through my home directory, however once I try and run Cadence, I get the attached error.
View 4 Replies
View Related
Jun 11, 2010
One of my colleague has created a LINUX machine with VMWare. This machine has a name such as S003AP03 and IP adress. Normally one can connect to the machine by using putty with the machine's name or IP-Address. But to this machine one can't connect it with it's name. Something should wrong.
Where can I make the correction?
View 8 Replies
View Related
Jan 5, 2011
I am out of ideas of how to run videos at a remote machine that has a display. I have a debian system with gnome installed and everything is set up but I just don't now how to start the video over anything. I have tried simply to start #vlc video file - but this way it thinks that I want to run it in my bash over at a nother computer. I tried installing vnc but this just ports a new desktop and masically is a terminal which does not give me any control over the display.
View 7 Replies
View Related
Nov 25, 2010
I have X Window running on one of RHEL Machine 192.168.2.2.I have logined through putty from remote Windows Machine 192.168.2.5. Now What I need to open the xterm (if I run the command through putty it should open xterm in the linux Machine).
View 2 Replies
View Related
Feb 6, 2010
How can I connect to Linux (which is in a VM) from the host PC using putty? I can ping the 192.168.1.108 from my host PC. And there is sshd process running on Linux. I choose the SSH to connect, but gives error.
View 5 Replies
View Related
Jan 2, 2010
I am new to using Ubuntu but I have installed ubuntu karmic koala on my laptop and am dual booting ubuntu and xp on my desktop. I am wondering how I go about setting up putty so I can view my desktop from my laptop because I travel quite frequently.
View 2 Replies
View Related
Jan 18, 2010
Execute putty to start a script on a remote linux server which requires user input The remote script does a read -p "Please enter name" NAME I can use plink to execute a script over SSH, the following attempts and problems are shown below :- Note the -load ns is to load a session that doesnt exist, ie ensure no defaults are used
1) plink.exe -load ns <ip_addr> -l <user> -pw <password> <script path/name> Problem) Doesn't allow/show user input, ie its non-interactive.
2) Add -t to allocate a pty :- plink.exe -t -load nc <ip_addr> -l <user> -pw <password> <script path/name> so now the user input can be seen, but I get Ctrl+H (^H) when backspace is pressed, ok if the user doesnt make a mistake!
3) Use putty instead with a saved session putty.exe -load "SavedSession" Get a new window opened, not a biggy, but not as nice. (b) saved session cannot be easily moved. (c) Get password prompt, cannot provide password like with plink, I know I know, use keys, but this is a closed, private network, and its easier not to bother with keys!I would like the SSH to execute in-line, that is from within the batch file/command line shell I am in, not prompt for username/password, run the linux script and allow prompts and delete/backspace to work.
View 5 Replies
View Related
Jun 5, 2011
I have a database in SQL Server 2005 in my local Windows System and I want to import this database to my linux (ubuntu) server remotely using putty.
View 5 Replies
View Related
Nov 20, 2010
I have my main box, Ubuntu 10.04lts, and I am trying to use remote desktop viewer to see the desktop on a Windows XP machine. The machines are side by side The Ubuntu box is hardwired to my network router, and the XP machine is connected via wireless. Both get to the internet fine, and I can ping the Ubuntu box from the XP box. But, I cannot ping the XP box from the Ubuntu box, and Remote Desktop Viewer won't establish a connection to the VNC server I have running on the XP box.
View 6 Replies
View Related
Nov 30, 2010
How do you transfer files on a Linux machine with ftp,sftp and scp disabled onto a remote machine
View 2 Replies
View Related
Jul 18, 2011
Whenever I put ssh into remote machine am getting the following messages. Write Failed: Broken Pipe (After logged into that machine ) Read Socket Failed: Connection reset by peer (While trying to log in ) Also known_hosts file is changed frequently.
View 1 Replies
View Related
Jun 27, 2011
Seemingly simple question, which yields slightly undesired results. Execute putty to start a script on a remote linux server which requires user input The remote script does a read -p "Please enter name" NAME I can use plink to execute a script over SSH, the following attempts and problems are shown below :-
Note the -load ns is to load a session that doesnt exist, ie ensure no defaults are used
1) plink.exe -load ns <ip_addr> -l <user> -pw <password> <script path/name> Problem) Doesn't allow/show user input, ie its non-interactive.
2) Add -t to allocate a pty :- plink.exe -t -load nc <ip_addr> -l <user> -pw <password> <script path/name> Problem) Ok, so now the user input can be seen, but I get Ctrl+H (^H) when backspace is pressed, ok if the user doesnt make a mistake!
3) Use putty instead with a saved session putty.exe -load "SavedSession" Problem) (a) Get a new window opened, not a biggy, but not as nice. (b) saved session cannot be easily moved. (c) Get password prompt, cannot provide password like with plink, I know I know, use keys, but this is a closed, private network, and its easier not to bother with keys!
So ideally, I would like the SSH to execute in-line, that is from within the batch file/command line shell I am in, not prompt for username/password, run the linux script and allow prompts and delete/backspace to work.
View 1 Replies
View Related
Dec 26, 2009
Is there any way to redirect a remote Linux machine mplayer output audio to local one?
View 2 Replies
View Related
May 2, 2009
I need to install in my centos 5.3 a remote sesion login like a Terminal Server on Windows. I tried to use a VNC but I have a problem and it is that the user must be loged before on local machine. I need to can wake on lan my server and log in with that program.
View 1 Replies
View Related