Software :: Building Multimedia Software - Finding Dependencies?
Feb 17, 2010
Downloaded multimedia software sources, and am looking for the dependencies needed to build it. Have some questions on what to do. What is needed to get these supported on the Linux box? If there is a particular library needed, what is the library name and website for sources?
Mozilla XUL/ GECKO support
Joystick support
Renoir
DVB support
XMLPRC support
Also, I would like to add additional sound support, could someone help on if these different sound support options conflict with each other?
OSS
ALSA
Jack
PulseAudio
Currently, I have OSS and ALSA...but was thinking of adding Jack and PulseAudio.Would this cause a conflict?
View 4 Replies
ADVERTISEMENT
Apr 2, 2011
Is there a command that I can use to find out what are the dependencies of a given package.
View 4 Replies
View Related
Nov 23, 2010
I'm looking to install, and perhaps create a SlackBuild) for an application that I think might be interesting.
The dependencies listed are:
libx11-dev, libxt-dev, libimlib2-dev, giblib-dev, and libxinerama-dev
I've checked to see if the packages are installed w/:
Code:
I've also looked for any existing SlackBuilds, but the only one that showed up in the database is: "giblib"
Where can I look to find these dependencies, their sources, or determine whether they're already installed in Slackware64 13.1?
Also, how would one determine if this can compile for a 64bit, non multi-lib install?
View 3 Replies
View Related
Jun 28, 2011
its been years since I've compile anything so at a loss at what to do next. Emerald keeps giving me errors during "make": I've installed all deps listed here: [URL]
This is what I end up with:
make all-recursive
make[1]: Entering directory `/home/qwe/emerald'
Making all in libengine
make[2]: Entering directory `/home/qwe/emerald/libengine'
[Code]....
View 9 Replies
View Related
Jan 31, 2010
So I've got old components from my previous computer I'd like to use to build a media center. Here's what I have:
Case
550W PSU
MSI K8NEO 4 Platinum MOBO
[code]...
View 3 Replies
View Related
Apr 17, 2010
how to get the dependencies installed.
mark@mark-desktop:~$ sudo apt-get install cinelerra
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code].....
View 2 Replies
View Related
Jun 15, 2010
Im trying to build ffmepg with shared lib under ubuntu 8.04 hardy. Im was following these instructions :
>> Install FFmpeg and x264 on Ubuntu Hardy Heron 8.04 LTS <<
But it was not for shared library. So in the part 7. I added "--enable-shared" to the "configure" command but when I compile ("make") I ve got an error:
"
/usr/bin/ld: /usr/local/lib/libopencore-amrnb.a(wrapper.o): relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC
/usr/local/lib/libopencore-amrnb.a: could not read symbols: Bad value
[code]...
I read another thread saying how to resolve this error :
>> trouble with ffmpeg and shared libs <<
but its still make the error when i follow these instructions...
I decided to add "--enable-pic" flag to "configure" but the error still happen.
View 1 Replies
View Related
Mar 6, 2010
I thought it would be great to be able to play DVD's so I installed an update that would enable this. The multimedia update was 1.3 Mb but the dependencies was about 650 Mb! Among others I had to update the whole Office pack. Is this a "feature" I have to go through on every installation or is multimedia special?
View 9 Replies
View Related
Feb 13, 2010
In KDE I have no System Notifications, Kaffiene, Amarok2, Amarok and Xine immediately exit when opened without an error. If I try to open the System Settings/Multimedia or System Settings/Notifications control panels they also exit without an error. I have audio in other applications, MPlayer, Skype, VLC, Songbird, etc., as well as from the Konsole. I've tested Konsole audio using the published guidelines in the Audio HowTo, 'speaker-test' works fine for all users. In Yast2 I can configure and test the audio card without errors, but I am not able to get USB headphones working. I have been through the 'Check your multimedia problem in ten steps'. There are no errors or missing dependencies showing up. I've booted from the 11.2 Live CD and everything worked fine including KDE Notifications and application audio. I've tried deleting my .kde4 profile, this didn't fix the problem, and application and control panel behaviour remained the same with a clean profile.
View 1 Replies
View Related
Sep 20, 2010
Configure: error: Unable to locate a suitable configuration of wxWidgets v2.4.x. The currently available configurations are listed below. If necessary, either install the package for your distribution or download the 2.4.x version of wxWidgets from [URL]. To help configure find the right version set WX_CONFIG to point to it. wxWidgets 2.5.x and 2.6.x are NOT supported! But I thought I installed widgets 2.4?
View 2 Replies
View Related
May 25, 2011
I'm about to install Solr on one of our test servers running Ubuntu Server 10.04.1, and the dependency lists for both solr-jetty and solr-tomcat have me very confused. Here's what I get back from the dependency tree for solr-jetty:
Code:
ant
ant-gcj
ant-optional
ant-optional-gcj
[code]....
What's the deal with all the multimedia and fonts stuff in there? Come on, hicolor-icon-theme? This is a headless server, I don't understand why Jetty or Tomcat or the underlying OpenJDK packages would require packages like libasound2, libflac8,libvorbisenc2 or any of the other multimedia packages in there. The font packages also have me confused. To make matters more confusing, the dependency list for the same package on my Ubuntu 11.04 desktop machine doesn't seem to have the same multimedia "needs".
View 3 Replies
View Related
Apr 10, 2011
i'm trying to build gnome3 using the jhead script on [URL]... but it fails every time. has any body else had better luck with this? I'm using the script not the repo as they are out of date atm the last part of the scripts error from
[code]....
View 2 Replies
View Related
Oct 10, 2010
I am attempting to install the Linuxant ALSA driver to make my sound work properly (speakers muting when headphones plugged in). This worked on Lucid, but on Maverick the installation fails at the "building modules" stage. It directs me to a logfile, which I have reproduced here:
Code:
rm -f .depend *.o snd.map*
rm -f modules/*.o modules/*.ko
rm -f *~ out.txt *.orig *.rej .#* .gdb_history
rm -f doc/*~
rm -f config.cache config.log config.status Makefile.conf
rm -f utils/alsa-driver.spec .....
make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic'
make: *** [compile] Error 2
The package partially installed I have no sound at all. I have kernel headers and every related -dev package I can think of installed. I'm running 64-bit; could that be an issue?
View 3 Replies
View Related
Sep 9, 2010
I downloaded the deb from the Phoronix site, installed it, and found out there were missing dependencies: php5-cli php5-gd.
These took up about 10.5 MB. Next I ran 'phoronix-test-suite list-tests', agreed to the license, then ran it with 'gui', and found out that I needed to load the 'PHP GTK' module. There is no Debian package ( at least no combination of gtk and php in description or name returned any results ), so I downloaded the source and read the instructions in INSTALL.
When running buildconf, it died due to 'phpize' not being found. This binary only comes with the php5-dev package, another 12 MB. After installing that package, buildconf dies with
Configuring for:
View 1 Replies
View Related
May 6, 2010
When I try to install Acidrip I get this message: Package Dependencies Cannot Be Resolved.
Trying to install Acidrip from Synaptic I'm told: Could not intsall or upgrade package. With this additional information:
Depends: mplayer but it is not going to be installed
Depends: mencoder but it is not going to be installed
So, I try to install mplayer and get this message:
Depends: mplayer-nogui but it is not going to be installed
Depends: libx264-67 (>=1:0.svn20090502) but it is not installable
I try to install mplayer-nogui and get:
Depends: libx264-67 (>=1:0.svn20090502) but it is not installable
Now I'm stuck in a point where I can go no further. I really like AcidRip and have been using it for more than two years through all of the upgrades until Lucid.
I've tried installing all of the non-free codecs, both audio and video with no result.
View 1 Replies
View Related
May 22, 2011
I was experiencing problems in Totem (Movie Player) seeking through some mp3 files. This problem, luckily, was solved (as per this launchpad bug post) by swapping the package:
gstreamer0.10-plugins-bad
for the package:
gstreamer0.10-plugins-bad-multiverse
The only problem being that the package Miro requires:
gstreamer0.10-plugins-bad
So, this makes me have to choose between Totem and Miro. I'd like to use both, fully enabled.
View 3 Replies
View Related
Sep 13, 2010
is there some repository where I can find xmms for 11.3? (no xmms2)
View 6 Replies
View Related
Dec 3, 2010
Got a Sony Ericsson K800i which I tether by USB. I'm having trouble finding the port for the config file, I have used HWINFO and I can see my phone but on the 'Linux.sysfs_path' parameter it doesnt state which tty I am on.
Anybody have any suggestions as I would really like to be able to read my sms messages on my system while hooked up.
View 1 Replies
View Related
Apr 24, 2011
I have searched but I couldn't find anything. I would like something small like a screenlet to monitor fan speed and temperature of an AMD 6970 gpu. So far I could only find for nVidia's products.
View 5 Replies
View Related
Aug 3, 2011
I have all multimedia packages installed as the instructions of opensuse site (ffmpeg, libdvdcss, ...) and plus some others not mentioned there (gstreamer, libav ...).Recently I was watching a dvd in kaffeine but several times the video and audio had small stops of about one or half second. It even came to the point of skipping a bit of the video. I tried vlc and the same thing happenned up to a point where the video froze at all. Also in other dvd's, when I tried to watch the content of a menu option vlc skipped the first few second of that scene before playing it. I tried smplayer and the exhibition of video was perfect except by the fact that it don't recognize dvd menus and subtitles. All mplayer gui's don't recognize them.So what player available for opensuse is able to recognize menus, subtitles and at the same time play dvd movies without other problems?
View 9 Replies
View Related
Mar 21, 2010
I have searched the forums and can't find the specific answer, so I will post the question here with the hopes to solicit a response:
I have installed Ubuntu 10.04 beta and it is currently "stock." I would like to watch Divx videos on websites using Firefox.
View 8 Replies
View Related
Jun 3, 2010
were do i get the .dev files for libx264 0.98 i think is the version it is asking for.I install the latest libx264 from git or does that install the .dev file also.
View 3 Replies
View Related
Sep 24, 2010
I recently changed hardware in my gaming pc, and am now left with a bunch of loose parts, from which I intend to build a mediacenter. what software is most suited for below mentioned needs.
- recording tv from dvb-c tuner, HD support preferable
- play video, foto and music from my NAS
- browser for renting moviestreams, showing NFL Gamepass, ..... etc.
My own suggestion is Ubuntu 10.04/10 with added MythTV, but I would like your opinion if this is the best sollution or if something else would make my life easier.
My hardware is:
CPU: Intel core2dou E8500
MB: Asus P5G41-M
TV-tuner: TerraTec Cinergy C PCI, HD-Support
View 1 Replies
View Related
Oct 13, 2010
I have some video files that are in H.264/MPEG-4 with 5.1ch AAC audio. I also have the 2 channel audio. I cant stream or play MPEG-4 w/5.1 with my 360 so I need to remux the video with the 2 channel audio. Its easy as pie with YAMB but how can I do it with Linux?
View 9 Replies
View Related
Mar 27, 2011
when editing an mp4 file from videos with avidemux, the editing works perfectly but the resulting video sound is speeded up but the image runs at normal speed. the resulting mess is out of synch video/sound.
View 5 Replies
View Related
May 8, 2011
I've been trying to get my HP dc5750 computer to produce sound, but so far there hasn't been any joy.That is until today! I found out that there isn't a sound module for the card that is in the computer. I know that is no reason to be happy, but at least now I know the reason why the sound doesn't work.My sound card is an HBA ATI SB.How do I go about finding a sound module?If that module can be found, how would I go about installing it?I'm new Linux and don't know anything about programming.
View 5 Replies
View Related
May 17, 2010
Is there any repository providing latest ALSA packages for Debian?
View 4 Replies
View Related
Feb 8, 2010
I wish to play a training video. When I click on the link I get a prompt to open with RealPlayer. Since I do not think I have RealPlayer installed I checked the link and it an .asx file. I guess it is a link for streaming the video. Whatever, which playing software should I install? I am aware of the multimedia tutorial on this site but am not clear on my objective as there are so many player options apparently available. It would help if I knew what I should be using to play these videos.
View 9 Replies
View Related
Mar 24, 2010
I'm planning to upgrade my wife's computer when 10.04 comes out, what is a good cost effective video card to support compiz effects?
View 5 Replies
View Related
Jul 16, 2010
Yes I know there was so many themes created about broadcasting shoutcast radio, but I wasn't got information where program work good. I have tried IDJC, but not work. I need the program that I just install it and works. Program should have 2 audio players (1 is good too) and microphone "player" for talking (key OFF/ON).
P.S.: My PC runs Ubuntu 10.04
View 1 Replies
View Related
