OpenSUSE Multimedia :: No Errors Or Missing Dependencies Showing Up
Feb 13, 2010
In KDE I have no System Notifications, Kaffiene, Amarok2, Amarok and Xine immediately exit when opened without an error. If I try to open the System Settings/Multimedia or System Settings/Notifications control panels they also exit without an error. I have audio in other applications, MPlayer, Skype, VLC, Songbird, etc., as well as from the Konsole. I've tested Konsole audio using the published guidelines in the Audio HowTo, 'speaker-test' works fine for all users. In Yast2 I can configure and test the audio card without errors, but I am not able to get USB headphones working. I have been through the 'Check your multimedia problem in ten steps'. There are no errors or missing dependencies showing up. I've booted from the 11.2 Live CD and everything worked fine including KDE Notifications and application audio. I've tried deleting my .kde4 profile, this didn't fix the problem, and application and control panel behaviour remained the same with a clean profile.
View 1 Replies
ADVERTISEMENT
Oct 30, 2010
I am using opensuse 11.3 on a computer with limited internet connectivity.Can anyone provide a list of essential libraries which would be enough for most applications. I get errors due to library missing while running configure script.
View 1 Replies
View Related
Sep 9, 2010
I downloaded the deb from the Phoronix site, installed it, and found out there were missing dependencies: php5-cli php5-gd.
These took up about 10.5 MB. Next I ran 'phoronix-test-suite list-tests', agreed to the license, then ran it with 'gui', and found out that I needed to load the 'PHP GTK' module. There is no Debian package ( at least no combination of gtk and php in description or name returned any results ), so I downloaded the source and read the instructions in INSTALL.
When running buildconf, it died due to 'phpize' not being found. This binary only comes with the php5-dev package, another 12 MB. After installing that package, buildconf dies with
Configuring for:
View 1 Replies
View Related
Aug 31, 2010
I am trying to install pygame(from source) for python3 on my openSUSE 11.3. From repos pygame is only available for python2 and not for python 3. While running the installation scripts I am getting this:
Code:
linux-eeow:/home/vivek/Projects/codes/python/pygame-1.9.1release # python3 setup.py
No Arguments Given, Perform Default Install? [Y/n]Y
WARNING, No "Setup" File Exists, Running "config.py"
Using UNIX configuration...
Hunting dependencies...
SDL : found 1.2.14
FONT : not found
IMAGE : not found
MIXER : not found
SMPEG : found 0.4.5
PNG : found
JPEG : found
SCRAP : found
PORTMIDI: not found
PORTTIME: not found
Warning, some of the pygame dependencies were not found. Pygame can still compile and install, but games that depend on those missing dependencies will not run.
Would you like to continue the configuration? [Y/n]:
What these dependencies are. What all do I need to install...
View 2 Replies
View Related
Feb 26, 2010
I am running Valgrind on my program. It shows me two errors but mentions only addresses against them and not actual code even on a debug build.
The output is
==23002== Memcheck, a memory error detector.
==23002== Copyright (C) 2002-2005, and GNU GPL'd, by Julian Seward et al.
==23002== Using LibVEX rev 1575, a library for dynamic binary translation.
[code]....
View 1 Replies
View Related
Sep 1, 2011
I am following [URL] to install ubuntu on my beagleboard via Ubuntu 10.10 on liveCD. When I enter this command in terminal.
"sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle"
It gives me a error sayings Dependencies are missing.
"Missing pv.Your System is Missing some dependencies
Ubuntu/Debian: sudo apt-get install uboot-mkimage wget pv dosfstools btrfs-tools parted"
And when I enter the that above in terminal I get the following error.
Unable to locate PV.
View 5 Replies
View Related
Feb 15, 2010
My machine is running with RHEL 3 and the kernel version that I am using is 2.4.21-37.EL. I would like to upgrade present gcc 3.2.59 to gcc-3.4.6-8. I tried but encountered with errors like dependencies and many more. how to upgrade gcc.
View 5 Replies
View Related
Oct 28, 2009
While i installed rpm package its showing error of failed dependencies n in another case cant create transaction lock on /var/lib/rpm_db.000
View 4 Replies
View Related
Mar 6, 2010
I thought it would be great to be able to play DVD's so I installed an update that would enable this. The multimedia update was 1.3 Mb but the dependencies was about 650 Mb! Among others I had to update the whole Office pack. Is this a "feature" I have to go through on every installation or is multimedia special?
View 9 Replies
View Related
Mar 12, 2011
I have a computer with 128 ko of RAM (a very old one). I installed yesterday ubuntu 8 because ubuntu 9 requires 512 ko of RAM and was very slow. Now, I have problems to update packages and to install every thing. I changed the sources.list because it seems that links are no more available according to the error messages. (I have put many adresses for ubuntu 9 because I think the kernel is the same not as the kernel for ubuntu 10). But new problems have occurred like "broken dependencies". Now I want to correct, and I don't know how? I'm still a beginner with this OS.
View 2 Replies
View Related
Nov 11, 2009
I am getting the error below. Is this something that will resolve as all of the packages are updated?
Code:
[root@ella ~]# yum -y install --skip-broken iptstate
Loaded plugins: fastestmirror, protectbase, refresh-packagekit
Loading mirror speeds from cached hostfile
* fedora: mirrors.tummy.com
* livna: rpm.livna.org
* rpmfusion-free: mirrors.tummy.com
* rpmfusion-free-updates: mirrors.tummy.com
* rpmfusion-nonfree: mirrors.tummy.com
* rpmfusion-nonfree-updates: mirrors.tummy.com
* updates: mirrors.tummy.com
2 packages excluded due to repository protections
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package iptstate.i586 0:2.2.1-5.fc11 set to be updated
--> Processing Dependency: libnetfilter_conntrack.so.1 for package: iptstate-2.2.1-5.fc11.i586
--> Finished Dependency Resolution
iptstate-2.2.1-5.fc11.i586 from fedora has depsolving problems
--> Missing Dependency: libnetfilter_conntrack.so.1 is needed by package iptstate-2.2.1-5.fc11.i586 (fedora)
Packages skipped because of dependency problems:
iptstate-2.2.1-5.fc11.i586 from fedora
View 2 Replies
View Related
Oct 28, 2009
While loading a rpm package its showing error of failed dependencies so wat to do for dat pls guide me
n in another case its showing cant create transaction lock on /var/lib/rpm/_db.000
View 1 Replies
View Related
Nov 6, 2009
I am trying to install gdb 7 because gdb 6.8 has been freezing quite a bit on me lately.
Code:
[doriad@davedesktop ~]$ sudo rpm -ihv gdb-7.0-3.fc12.i686.rpm
warning: gdb-7.0-3.fc12.i686.rpm: Header V3 RSA/SHA256 signature: NOKEY, key ID 57bbccba
error: Failed dependencies:
libc.so.6(GLIBC_2.11) is needed by gdb-7.0-3.fc12.i686
libreadline.so.6 is needed by gdb-7.0-3.fc12.i686
It looks like the latest version of readline in F11 is 5.2 and glibc is 2.10. Is there an easy way to get these dependencies installed in Fedora 11?
View 3 Replies
View Related
Jun 23, 2009
I have a problem with yum on fedora 11. When I ran yum install mplayer/vinagre.i586/ or whatever, It always process dependancies and then at some point returns an error like
or
I tried installing different applications but yum always comes with the above errors.
This is my yum repolist
My fedora.repo file
And my yum.conf
I have tried:
View 3 Replies
View Related
Mar 8, 2009
I received the updated packages available notice and tried to run the updates.
When I run it, it checks for dependencies and I get this:
I'm seriously new to Linux and I admit, not much makes sense right now.
View 4 Replies
View Related
Jul 10, 2010
I have been running f13 ever since it was released. Evidently the kmod-rt2870 rpms are never deleted when older kernels are removed. When I tried to do today's update the Package Manager and yum complained that some of the older kmod-rt2870 packages left over from fedora 12 were missing kernel dependencies. The kernels have been missing for a long time. I don't know why the package manager started complaining today.
I tried
1) yum clean all
2 rpm --rebuilddb
3) removed the /lib/modules directory corresponding to the old kernels
and the problem persisted.
I finally removed all of the kmod-rt2870 rpms what where originally installed in fedora 12 and I was finally able to complete the update. Why did the package manager suddenly start complaining about the missing kernels?
View 1 Replies
View Related
Jun 4, 2011
I'm trying to install a program (A vpn gui) and when I run the installation file I get this output:
Code:
guan@guan ~/Desktop/HMAGUI-Ubuntu-Release/bin $ sudo ./Install.sh
Reading package lists... Done
[code]...
View 3 Replies
View Related
Dec 12, 2010
I tried
yum install kchmviewer-5.2-1.i586.rpm
then I got:
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Parsing package install arguments
Examining kchmviewer-5.2-1.i586.rpm: kchmviewer-5.2-1.i586
code....
View 3 Replies
View Related
Nov 9, 2010
I am currently using SUSE ENT x64 v11 SP1. While trying to install various packages I keep getting dependencies error. I tried reinstalling the rpm packages(listed below) and use various versions but seems like no matter what I try it doesn't go away.
Code:
--> Missing Dependency: liby2storage.so.2()(64bit) is needed by package smis-providers-1.0.0-10.29.x86_64 (installed)
Error: Missing Dependency: librpmio-4.4.so()(64bit) is needed by package libsnmp15-5.4.2.1-8.1.x86_64 (installed)
Error: Missing Dependency: librpmio-4.4.so()(64bit) is needed by package kdebase4-SLED-11-25.1.x86_64 (installed) .....
Code:
rpm-python-4.4.2.3-37.2
rpm-4.4.2.3-60.2
rpm-32bit-4.4.2.3-37.8
deltarpm-3.4-103.22
rpm-devel-4.4.2.3-27.1
no broken libs or whatsoever. What am i missing here?
View 5 Replies
View Related
Oct 25, 2009
My girlfriend has just dusted off her Aspire One netbook with Linpus on it. I've tried to update packages and such (eventually got the password changed and such) now I can't update the packages or enable GNOME.
Updating the packages brings up this error:
Code:
And trying to switch to GNOME brings up this error:
Code:
View 2 Replies
View Related
Feb 1, 2010
who to install mumble 1.2 on slackware 13 i can't install, missing dependencies, tx. hola alguien sabe como instalar mumble 1.2 en slackware 13? no encuentro las dependencias, gracias
View 14 Replies
View Related
Mar 7, 2011
Been attempting to upgrade the PHP version to a VPS on Blacknight Ireland hosting (Blacknight Hosting) but am having trouble trying to install the yum package on CentOS 5.5. I've downloaded a suitable yum installer from the hosting companies own downloads site (which you'd presume would work with their CentOS version), uploaded and attempted to run. However, it fails with the following output:
[Code]...
Been reading from various sources through Google searches that these should already be preinstalled with CentOS? Can anyone point me in the right direction to get these?
View 1 Replies
View Related
Oct 31, 2010
I recently switched from Windows to Linux (using Fedora 13 at the moment). I managed to get most things working, but there is one last thing that I'd love to get working: amBX (more info: here). After some searching I found a few guides on how to install it (like this guide: link) I know that one is for Ubuntu, but I can't find any for Fedora, so I used that one as a general guideline. This guide (and the others that I found) require installing Boblight (website here). Compiling Boblight requires several dependencies, but I can only get two of the required dependencies. I used the following code to install the dependencies:
Code:
sudo yum install gcc libusb-dev ruby ruby-dev libportaudio-dev libavdevice-dev libswscale-dev libavformat-dev libavcodec-dev libxrender-dev libsdl1.2-dev libc6-dev-i386 libx11-dev
This returned the following:
Code:
Loaded plugins: presto, refresh-packagekit
code....
View 14 Replies
View Related
Aug 13, 2011
I have just got rid of Ubuntu in favor of Fedora, after more than ten years using Debian and Ubuntu. Most differences are pretty minimal but one big difference I haven't been able to master yet is the realm of rpm and yum. My kernel is 2.6.40-4.fc15.x86_64. Today, when running yum update I was greeted with a number of errors.
Output of yum check:
Code:
Loaded plugins: fastestmirror, langpacks, presto, refresh-packagekit
glibc-2.14-5.x86_64 is a duplicate with glibc-2.14-4.x86_64
glibc-common-2.14-5.x86_64 is a duplicate with glibc-common-2.14-4.x86_64
1:perl-Module-Pluggable-3.90-160.fc15.noarch is a duplicate with 1:perl-Module-Pluggable-3.90-159.fc15.noarch
1:perl-Module-Pluggable-3.90-160.fc15.noarch has missing requires of perl = ('4', '5.12.4', '160.fc15')
1:perl-Pod-Escapes-1.04-160.fc15.noarch is a duplicate with 1:perl-Pod-Escapes-1.04-159.fc15.noarch
1:perl-Pod-Escapes-1.04-160.fc15.noarch has missing requires of perl = ('4', '5.12.4', '160.fc15')
1:perl-Pod-Simple-3.13-160.fc15.noarch is a duplicate with 1:perl-Pod-Simple-3.13-159.fc15.noarch
1:perl-Pod-Simple-3.13-160.fc15.noarch has missing requires of perl = ('4', '5.12.4', '160.fc15')
I have also attached the output of yum update, which I believe is more verbose on the sources, etc.
I'm afraid that if I just start forcing removal of packages I'll render my system useless.
View 6 Replies
View Related
Apr 7, 2010
I am tech support engg. Provide support for its software which runs on Linux and Windows. Actually I got stuck in installing PHP in my RHEL server. I redirected to this forum, so I registered here. Looking for some URL to global repository which I can use. Lots of dependencies are missing in my repo.
View 2 Replies
View Related
Aug 11, 2010
I have debian 4.0 installed for my apache web server (for some reason I did not require PHP all these days...). Now, I wanted to install PHP5 on the server. But I get http errors.When I run apt-get update I get the following error0% [Connecting to security.debian.org] later it displays[URL]The same happens when I try to install PHP5What could be the reason... should I fix sources.list?
View 4 Replies
View Related
Jun 22, 2011
I changed the password on my samba server and now I cannot mount the share anymore from my Windows 7 box. The logs shows no errors whatsoever about authentication, is that normal? I remember from a long time ago that I never saw samba do that and it has made troubleshooting very difficult.
I changed the password with the smbpasswd wanuser command the samba version is 3.2.5
here my samba.cfg file
[global]
server string = asdfadf
log file = /var/log/samba/%m
panic action = /usr/share/samba/panic-action %d
[Code].....
When I crank up the log level, samba shows lots and lots of totally irrelevant messages like connected and disconnected, but not why it got disconnected. On the Windows 7 machine, I get an error that the user and password is not correct. Why does Samba not report it?
View 3 Replies
View Related
Apr 29, 2010
I am getting this error while using rsync
Quote:
Could not convert filename to Unicode: 'H20 dinkus_.pdf': Invalid or incomplete multibyte or wide character
Could not convert filename to Unicode: 'ANT0012 H20 Brochure_OFFSET_paths_.pdf': Invalid or incomplete multibyte or wide character ntfs_mst_post_read_fixup: magic: 0x00000000 size: 1024 usa_ofs: 0 usa_count: 65535: Invalid argument
Quote:
file has vanished: "/media/sputold_server/2007 Archive/Icon?" file has vanished: "/media/sputold_server/2007 Archive/Resources/stage 1/images/resources/5yr stamp?1.tif"
WHat should i do. How can i delete the files which are on receiver but not on main server
View 3 Replies
View Related
Mar 21, 2011
A day or two ago I saw a weird file in my downloads folder, and deleted it. I'm not sure why I deleted it rather than wondering why there was a weird file there, but anyway...another one has shown up.
name: datetime
type: PS document (application/postscript)
It's an image. The top part of the image shows what I was doing in a terminal last night. The bottom part shows a folder I was browsing in Nautilus. I believe the top and bottom parts are from different times. I'm a little weirded out, it's like something is taking screenshots of what I'm doing. Anyone happen to know what program created these or why?
View 8 Replies
View Related
Dec 15, 2009
I just finished upgrading the last of 3 machines from F10 to F12 using preupgrade (all i686). Except for a non-critical hplip issue, all went well with the first two machines upgraded 1 week and 3 days ago, but some python F10->F12 updates were missing on the third machine that I upgraded yesterday, leaving yum inoperable. Thanks to good yum error messages, I was able to resolve the problem (I think), but I thought I should post to check if mine is a unique or common problem, to enquire if it may have resulted from some of the python packages being in "update transit" in the repositories, and/or whether something like this can be avoided in future? Details follow:
Upgrade appeared to go well except for some dejavu font dependency issues (experienced on all three machines) and libcrypto.so.7 missing for eet-1.2.2-4... (third machine). However, there was a boot message that some python module (can't remember which) was not present for some nvidia requirement, although video driver worked fine. When testing yum: First it complained that libpython2.6.so.1.0 was not present. Since that module conflicted (identified by rpm) with various python 2.5.*f10 packages that that were still on board, I copied libpython2.6.so.1.0 (from a current f12 rpm) into /usr/lib manually. Second, yum complained that urlgrabber was not available, so rpm with the latest python-urlgrabber for f12 solved that.
Third, yum complained that pycurl was not available, so rpm with the latest python-pycurl solved that. Yum now works! and boot message is gone! I ran "yum install python-libs" to make sure that any necessary dependencies were met following my manual installation of libpython2.6.so.1.0, which resulted in a bunch of python dependencies being upgraded as a result.
View 1 Replies
View Related
