When I try to install Acidrip I get this message: Package Dependencies Cannot Be Resolved.
Trying to install Acidrip from Synaptic I'm told: Could not intsall or upgrade package. With this additional information:
Depends: mplayer but it is not going to be installed
Depends: mencoder but it is not going to be installed
So, I try to install mplayer and get this message:
Depends: mplayer-nogui but it is not going to be installed
Depends: libx264-67 (>=1:0.svn20090502) but it is not installable
I try to install mplayer-nogui and get:
Depends: libx264-67 (>=1:0.svn20090502) but it is not installable
Now I'm stuck in a point where I can go no further. I really like AcidRip and have been using it for more than two years through all of the upgrades until Lucid.
I've tried installing all of the non-free codecs, both audio and video with no result.
cant update give me this error Package dependencies cannot be resolved
This error could be caused by required additional software packages which are missing or not installable. Furthermore there could be a conflict between software packages which are not allowed to be installed at the same time.
and when i press in details i have this libgirepository1.0-1
I'm trying to install Open Rocket : [URL]. I don't think I have java installed. I went to software center and tried to install "OpenJDK Java 6 runtime" and it says package dependencies cannot be resolved. I tried doing sudo apt-get install through terminal and it was dependent on a long list of things:
So I tried out Libreoffice and want to revert back to Openoffice for the time being. I uninstalled Libreoffice from ubuntu software center and now I can't reinstall openoffice from USC. i get this error:
" Package dependencies cannot be resolved: This error could be caused by required additional software packages which are missing or not installable. Furthermore there could be a conflict between software packages which are not allowed to be installed at the same time. " does anyone have a way of fixing this? edit: i've tried sudo apt-get install openoffice.org in terminal but it didn't work as well (i'm total noob)
I try to install Adobe Flash player plugin 10 in ubuntu software center it shows error like this " Package dependicies cannot be resolved. and also i try install iptux that also not showing the installation option.
When i try to select a codec for ripping a dvd to in acidrip, there are no codecs in the menu that is meant to be there. I have tried reinstalling mencoder and acidrip but no luck. running lucid with latest updates.this has not worked since i first installed lucid. i also get this when i run mencoder.
MEncoder SVN-r1.0~rc3+svn20090426-4.4.3 (C) 2000-2009 MPlayer Team Option of: Unknown suboption lavc Warning unknown option of at line 9 Option format: unknown format name: 'mp4' Error parsing option lavcopts=format=mp4 at line 10 Exiting... (config file error)
I am working on a project that sets up packages on the cloud.
For example, If i want to setup Drupal, i need seperate machines to maintain separate tasks, like mysql in one machine(cloud instance/node 1), apache server in another machine(cloud instance/node 2), etc.
So if drupal.rpm has dependencies apache.rpm(has deps too) and mysql.rpm(has deps too)
Is it possible in rpm package manager(yum) to handle such customizations & above requirement?
I have a trouble with the installation the libapreq2 package to configure mod_perl and Template Toolkit on Centos Linux with Apache 2.2.3 I obtained the following error message:
This error message appears when it tries to configure apxs.
I've been trying to rip DVD's using AcidRip but whatever DVD I try I get the same error from AcidRip - Can't Read DVD track. Faulty Disc?
After reading the forums I've tried /dev/dvd ,/dev/sr0 (Found by using the Disk Utility), /Media/DVD Title etc and tried running AcidRip both as myself and Sudo without success.
I was trying to install ubuntu 9.10 as a dual boot system with windows and I recieved this error message: The Grub package failed to install into /target/. Without the Grub boot loader, the installed system will not boot
This Error comes up after 94% of the install. I also cannot seem to get the side by side install option to work (sometimes this option appears sometimes it does not) I am not sure but I beleive seome of the install files have been placed on the hard drive because I only get the option now to install on the hard drive and totally wipe clean or the emptiest hard drive. So how would I get the possible Ubuntu install off the Hard drive. I have used this CD to Install before it has no scratches therefore should work. Also If I have Win Xp on a Raid 0 will the Ubuntu 9.10 install ?
I am trying to install tilp, a program for the link between a computer and a Texas Instruments calculator. I have downloaded all the packages to a local directory. I tried telling yum to install all the packages at the same time, though, the dependencies still fail to resolve (though they are all in the directory). I don't know if it would be safe to force install without the dependencies (even though I would install them later).
I need to download lame package to my offline ubuntu [URL] but its involved so many dependencies to download. Is there anyway to ease the pain of downloading each dependencies separately?
So to give a little background, I'm trying to pass wireshark(with a custom plugin) through my company's build system.The build system functions inside a change root thus all the dependencies need to located somewhere inside the chroot. Wireshark has a massive dependency tree that I couldn't possibly import manually one by one.So my question is, is there a way to conveniently import all the dependency packages somewhere on your local machine. This would mean I would just import the one folder into my change root.PS: the build-system's change-root has SMART package manager installed. But the channels it comes with are local ones(very little to choose from). So an alternative solution would be import therepositories that apt-get uses into smart and then use smarto install the packages which is monumentally easier.
I need to remove libgl1-mesa-swx11, as after I installed it, it has slowed down all my graphics. However, in SPM, it says in order to remove it, I have to remove most of my system, it seems as though it's "dependencies" involve everything to do with graphics, which I was running fine and much better before. So, how do I remove this package without removing dependencies?
I thought KDE is better than Gnome, and installed kubuntu-desktop on my Ubuntu 8.10 to get KDE. But then I found out my computer can't run KDE without serious laag, and now I want Gnome back. I tried switching back to Gnome, but now this is totally messed up. It's half Gnome and half KDE, plenty of bugs, and I got tons of KDE apps that I don't need. So I just want to remove package "kubuntu-desktop" and all it's dependencies. Maybe there's a fast and easy way to do it? I may/will want to do this for some other packages too.
Theres a package I'm going to install that is available only in 32-bit, but I have its dependencies installed as regular 64-bit. Since I'm multilib, will the 32-bit package be able to work with the 64-bit deps? If not, can 32-bit versions of the deps be installed side by side with the 64 bit?
I have compiled FFMPEG (and also mplayer and x264) from scratch to always run the latest version. I install ffmpeg using "checkinstall". When compiling FFMPEG manual and installing with checkinstall ffmpeg provides the following libraries: libavutil49, libavcodec52, libavdevice52, libavformat52, libavfilter0, libpostproc51, libswscale0
These can NOT be installed via apt-get (or similar) or the checkinstall will fail. So I have not installed them. The problem now is when I need to install a package (.dep or from Synaptic) that requires one of these a prerequisite. Then it is not "registered" by Synaptic that these are already provided through the FFMPEG build. I have tried to use the --provides flag on checkinstall and I can also see in Synaptic that on the ffmpeg package I installed with checkinstall that it says it provides said packages. I even have tried to modify the checkinstall script and add:
This also triggers Synaptic to list that ffmpeg replaces the packages. But still when I try to install anything that needs these packages it is not recongnized that they are provided by FFMPEG and when I install one of them (e.g. apt-get install libavformat52) then it replaces the FFMPEG library and FFMPEG stops working. So what is going wrong? Is this a bug in Synaptic? How is it possible under ubuntu to install manual compiled packages and have them "act" as correct dependencies for others?
I am in fc13, have installed a package, realise lately that its not really useful. that package install a lot of package for dependency.How can i erase all the package together that was downloaded and installed together with the target package as dependency via yum? actually i have done it using #yum erase `cat /var/log/yum.log |grep "Aug 31 22" |awk '{print $5}'|`as I know when I have installed them.....but is there ant safer and better way?
I have installed a package having almost 145 dependencies. Now when I want to remove the package (yum remove packagename) only the single package is removed.. Is there a way to remove the package including all its dependencies?
I am a long-time Debian user (I use it since Woody) and yesterday, due to an unexpected problem on my hard drive and an inexplicable lack of a current Debian cd or a possibility to perform a net install, I had to choose between either stay without computer at home or install one of the two other operating systems I happened to have on cds: Free-BDS or Slackware 13.0. Since I do not have time to learn something that I consider to be more radically different from Debian, I went for Slack.
So, first impressions:
1. Quick and smooth installation, though I got a bit over-enthusiastic when it came to select packages to install and unselected many libraries that I later realised that were necessary for various packages and I had to install them anyway.
2. Configure my wifi was surprisingly easy. I had braced myself for overly-complicated configurations to be done while I'd not have access to google, however rc.inet1.conf was very straight-forward and it provided plenty of examples to illustrate basically every possible configuration. All I had to do was to copy my wpa_supplicant.conf from my Debian backup and it worked.
3.X: For some reason I expected I'd have trouble to properly install and configure X, however my window manager was up and running in a few minutes. I copied my ~/GNUstep folder from my backup gave me the exact same X environment I had in Debian.
4. Package managing and dependencies: (I think I am correct to presume that that has to be the main complaint of most Debian users). pkgtool is very easy to use but, yeah, it does not resolve dependencies.
However, and while I installed a system way more minimalistic than any Debian system I had, I was surprised to find out that:
-Firefox had only ONE dependency
-vlc had none
-xfe, on the other hand, has some obscure dependency that I cannot figure out where to get it (libGLU).
So, a question for more experienced Slackware users: How do you get around the dependencies? Is there a quick way to find out what additional packages you will need on beforehand, or you install the package and try to run it, so to see what libs you need when it fails to start?
So i upgraded from 9.10 to 10.04. when i ran update manager after the install, it had some stuff for OpenOffice and during the update it hung. I powered off the laptop and turned it back on, booted into ubuntu and tried over but it didn't list the updates again.
I am needing to install the geda pcb layout package on my system. The one that is in the repository is a much older version, 20091103, and some projects I need to modify were developed using a newer version, 20100929, and the older one on Ubuntu will not open them. I downloaded the pcb source and ran configure and a couple of dependencies failed that I was able to correct with synaptic. But, then it complained about not having gdlib-config. Which I cannot find that in the repositories. What do I need to get?
I'm trying to install debian in my surface pro but I can't get the network card configured. I installed Arch before and it's wpa_supplicant package was working just fine until the last update. I was wondering if I could download the wpa_supplicant for debian and all it's dependencies from my windows OS to be able to configure my wireless card properly in Debian.
How do most experienced Fedora users remove packages with large number of dependencies?
I know that the question is as old as yum, but still I can't find solution. There is package-cleanup tool, which supposed to do the job with "--leaves" key, but it doesn't seem to work. Right now I have F12 installed. I installed rosegarden with `yum install rosegarden`. Then I removed it with `yum remove rosegarden`. If I understand right, `package-cleanup --leaves` must show all of 12 dependencies that was installed with rosegarden, but it shows none of them (although it shows few packages). Is this a bug? For years I used Ubuntu and Debian and I was completely satisfied with apt.
While trying to install a package using gpk-application ("Add/Remove Software" under System Tools), I accidentally checked the "Do not show this message again" checkbox, and now gpk-application does not list the package dependencies anymore.
I tried to go back to listing the dependencies, however, I could not find a way to do it. How do I revert to the default behavior, i.e., having gpk-application listing the dependencies again?
