Debian Multimedia :: Finding Repository For ALSA-1.0.23 Packages?

May 17, 2010

Is there any repository providing latest ALSA packages for Debian?

View 4 Replies


ADVERTISEMENT

Ubuntu Multimedia :: Add The Repository To Get The Medibuntu Packages?

Nov 30, 2010

I'm using Ubuntu 10.10 (i guess 64 bits), not the Maverick version but the new 10.10. My laptop is Acer Aspire 5715Z.

Now I was on this website and tried to add the repository to get the Medibuntu packages with the following code:

Code:
sudo wget --output-document=/etc/apt/sources.list.d/medibuntu.list http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list && sudo apt-get --quiet update && sudo apt-get --yes --quiet --allow-unauthenticated install medibuntu-keyring && sudo apt-get --quiet update

[Code].....

View 9 Replies View Related

Debian :: List Packages From Specific Repository?

Apr 11, 2010

how can I list all the .deb packages installed from a specific repository?

View 6 Replies View Related

Debian :: LMDE-- Ubuntu Packages In The Repository?

Jan 21, 2011

What the hey??? I was looking to install Virtualbox via Synaptic the other day and I found a package with "~Ubuntu~lucid" next to the latest version. I have all confidence in the Mint team and I'm sure they scrutinized these packages for compatibility, but a little disclaimer would have been nice. I do not want any Ubuntu packages on my system. The least they could do was package the source code into a pure .deb.

View 5 Replies View Related

OpenSUSE Multimedia :: Configuring Alsa (or Alsa-oss) After Hardware Upgrade?

Nov 19, 2010

I have recently been forced to do a hardware upgrade (my previous mobo died). Now, sounds works ok with,amarok because kde has recognized the new hardware and switched to it.

..... does not work, likely because flash uses alsa-oss which is probably not configured automatically. I have tried uninstalling and reinstalling both alsa-oss and flash, but it didn't solve the problem.

View 1 Replies View Related

Debian Multimedia :: Getting ALSA To Work ?

Mar 6, 2011

I'm having some trouble getting ALSA working on my system. I had been using OSS for awhile but decided to move to ALSA after a kernel upgrade. ALSA worked fine except for the tedious chore of having to run alsaconf everytime I booted up. I was getting errors message for OSS during boot up telling me OSS modules weren't loading properly and linux-headers needed to be installed to get it to work properly again. I ended up installing the linux-headers later due to some nvidia driver fiddling. My system has now reverted back to OSS and I can't seem to get ALSA to work at all. I have libasound2, alsa-base, alsa-utils and alsa-oss installed and alsaconf says no ALSA modules are loaded. I've been searching around and haven't found how to get rid of OSS to install ALSA properly.

Distro: Debian Lenny
Kernel: 2.6.26-2-686
Sound Card: Creative Labs SB Audigy
OSSv4.1
ALSAv-current packages according to synaptic

View 9 Replies View Related

Debian Multimedia :: VLC Alsa Stuttering On HD Video

Apr 23, 2016

VLC says: "main input error: ES_OUT_SET_(GROUP_)PCR is called too late" when I am playing back most Bluray discs I have tried.

See this bug post for what I am talking about: [URL].... It has to do with playing back h264 video with ALSA.

Possible fixes:
1. Obtain VLC 2.2.2 - see below
2. Fix by Modax here: https://trac.videolan.org/vlc/ticket/10422 - not currently using dmix and not sure how this will relate to HDMI sound
3. Use Pulseaudio - this does not work for me to get HDMI sound and I do not use Pulseaudio as a rule

I have just tried to compile VLC 2.2.2 and the configure script finished properly but early in the build it fails.

With make the error is:

Code: Select alljason@MEDIA:~/vlc-2.2.2$ make -j4
make  all-recursive
make[1]: Entering directory '/home/jason/vlc-2.2.2'
Making all in compat
make[2]: Entering directory '/home/jason/vlc-2.2.2/compat'
  GEN      dummy.c
make  all-am

[Code] ....

And with compile the error is:

Code: Select allMAKE     : compat
MAKE     : doc
MAKE     : po
MAKE     : share
for f in vlc.desktop.in skins2/default/theme.xml skins2/default/subX/about.png skins2/default/subX/eq.png skins2/default/subX/font.otf skins2/default/subX/main.png skins2/default/subX/playtreeglyphs.png skins2/default/subX/pl.png skins2/default/subX/sysbuttons.png skins2/default/subX/vol_anim.png skins2/default/subX/vol_slider.png

[Code] ....

I have tried installing 3 different versions of libua-dev, 5.1, 5.2 and 5.3. What could be the problem?

With the bugged audio drivers I'm going to replace the computer but it would still be nice to be able to know the solution to compiling VLC 2.2.2.

View 2 Replies View Related

Debian Multimedia :: Kde 4.3 Doesn't Share Alsa?

Mar 19, 2010

I'm using Debian squeezy amd64-based with KDE4.3 from the repo. I've installed kde-minimal package with some additional packages from KDE. Also I have GNOME installed on my system.

So the problem is that when I'm in KDE alsa is not shares between applications. It means that when I'm listening Amarok, for example, I can't play any other sounds in the system, not in browser or KPlayer. And if I stop Amarok playback, I can start listening some other application or watch a movie with a sound.
It looks like I'm using good old OSS again. Back to the 90's =)

In gnome meanwhile all works fine. I suggest that I'm missing some configuration or a package, or something else. I've also tried to install kde-full package, but nothing changed.

View 2 Replies View Related

Debian Multimedia :: My Sound - ALSA Or Pulseaudio?

Jun 18, 2010

I am using a couple of Debian Distro (Sid and Lenny) add some Ubuntu into the mix. I made the switch because I was amazed and satisfied with Debian --> once installed, everything works. For me that's okay for o so many years now. I don't question a lot because it just works and I do my job on it satisfactorily. Namely programming the LAMP style programming. Lately I have been using Debian to communicate over the internet -- using Skype and Pidgin and other such things, not to mention listening to music, watching movies, just using the default applications when I originally install Debian.

Along the way, I need to configure something -- that is desktop related -- like the screen resolution of a new LCD monitor replacing the old one and such. Now about my sound -- I'm not touching it because it is working. But that is not the case always. Now I have a constant error -- it is irritating. Rhythmbox don't make a sound always when I have open a web browser (iceweasel, chrome, epiphany) and a site with multimedia object on it -- like a video or something. So how do I correct this? How do I know, too what I am using -- ALSA or Pulseaudio?

View 1 Replies View Related

Debian Multimedia :: ALSA Not Memorizing User Settings

Feb 24, 2015

This is probably one of those situations easy to solve but I haven't had any success as I've been messing around with the sound handling in my system.

I found it had running ALSA, OSS and PulseAudio and ended up purging everything in the system except for ALSA. Pulse Audio, for some reason, would shut down the sound-card when I muted sound though keyboard shortcut; after that, I had to manually open the sound table and enable a master control that would always remained closed.

Now, after purging the system of the excess baggage, ALSA will not retain the settings of the user; system will always reboot with PCM sound control fully closed.

View 0 Replies View Related

Debian Multimedia :: Change The Default ALSA Device?

Aug 24, 2010

I recently bought a logitech headset which is working very nice, the thing is that I cannot make it my default device when I plug it in. I edited /etc/modprobe.d/alsa-base.conf to make snd-usb-audio the default card but it only works when the computer is turned on with the headset plugged in. A workaround is to plug it and then "alsa force-reload" but I find it very ugly plus it kills all apps using audio and leaves the volume indicator unstable.

View 1 Replies View Related

Debian Multimedia :: No Sound From ALSA - Softmodem Dead Too

Dec 17, 2010

In the process of trying to get the softmodem working, I finally attached speakers to this laptop and tried to play some sounds. Nothing but silence. Both the KDE system sounds and a stand-alone player (noatun) produce nothing. No error messages that I can find, either. (That might explain why the softmodem is dead, too...) I've run alsaconf several times, and even uninstalled and reinstalled ALSA. It thinks it is working, but is not. What sorts of things do I need to check to find where it isn't working?

Info: The motherboard is a FIC 3500W with the VIA P4M800 integrated chipset. This includes the VIA 8237 sound system, which is what ALSA detects and tries to use. The machine also has a Realtek ALC655 but I don't see any drivers for that in the lsmod output, so this is a possible source of the trouble.

View 11 Replies View Related

Debian Multimedia :: Can't Get Jackd2 Compile With Alsa Support

Feb 25, 2011

The sysytem I use is Debian Squeeze. what's wrong but jackd2 from debian official repositories does not work with alsa (I have alsa-base, alsa-tools, libaudio-dev, libaudiofile-dev and libasound2-dev installed). Now I downloaded fresh jackd2 source from sourceforge and when I try to "./waf -configure" it it says that there is no alsa package or it's too old in the system and configures itself without alsa support.

View 2 Replies View Related

Debian Multimedia :: ALSA 1.0.23: System Lockup With E MU 0202

Mar 20, 2011

I have a E-MU 0202 USB soundcard that I want to use as a input for my Debian Squeeze 6.0.1. Stock squeeze (kernel 2.6.32-5-686, version 2.6.32-31) has alsa-driver 1.0.21 as kernel modules and alsa-utils 1.0.23. The E-MU needs 1.0.23+ alsa driver, with 1.0.21 it loads in alsa but is not functional (no input) So I tried to install the 1.0.23 modules with module assistant: m-a update && m-a prepare m-a a-i alsa I left all conf-files (like /etc/modprobe.d/alsa-base.conf) standard. When I now connect the E-MU device, my whole system becomes unresponsive (to keyboard/mouse), and I get the following messages in my console: BUG: soft lockup - CPU#0 stuck for 61s! [modprobe:1292] Also, when I start top before connecting, I can see modprobe process taking 100% for a few minutes before system freezes completely. It did generate an oops once: [URL].... Does anybody here have any ideas how to get this working?

View 3 Replies View Related

Debian Multimedia :: ALSA - Sound From 1 Source Being Played Only

May 29, 2011

I decided to break free from the horrible life of a windows vista user. I like my new debian (Wheezy) installation and everything worked fine so far. Now I stumbled upon a huge problem. When I want startup and login into my gnome installation the first application I open gets to play sound and others after that just don't work. I looked endlessly on google but in my understanding the problem is within the ALSA driver.

Some specs :
OS version : Debian 7 (Wheezy)
Laptop brand : Packerd Bell Easynote LJ-65
Kernel installed : 2.6.38-2-686 (Standard one in wheezy)

View 4 Replies View Related

Debian Multimedia :: Alsa Just Returns With Device Or Resource Busy

Mar 31, 2015

Using debian testing.

Pulseaudio got installed by default here during installtion. Since I don't want it I first ran "systemctl disable pulseaudio", "pulseaudio --kill", then without rebooting I use mpd with alsa alone and it worked fine.

But then i rebooted, and now all applications, mpd, mpv, chromium etc just says that alsa returns with "Device or resource busy", tried rebooting again with no effect.

The soundcard appears as card 1 according to the output of "aplay -l", and defined that card 1is suposed to be default with this in "/etc/asound.conf":

Code: Select allpcm.!default {
    type hw
    card 1
}

ctl.!default {
    type hw
    card 1
}

It occurred to me that there might be an issue with permissions to the soundcard so I ran "ls -l /dev/snd"

Code: Select alldrwxr-xr-x  2 root root       80 Mar 31 03:27 by-path
crw-rw----+ 1 root audio 116,  8 Mar 31 03:27 controlC0
crw-rw----+ 1 root audio 116,  2 Mar 31 03:27 controlC1
crw-rw----+ 1 root audio 116, 12 Mar 31 03:27 hwC0D0
crw-rw----+ 1 root audio 116,  7 Mar 31 03:27 hwC1D0

[Code] ....

My user is a part of the audio group:

Code: Select alluid=1000(roberth) gid=1000(roberth) groups=1000(roberth),24(cdrom),25(floppy),29(audio),30(dip),44(video),46(plugdev),108(netdev),111(scanner)

As far as I can tell, that looks fine unless I am missing something?

View 1 Replies View Related

Debian Multimedia :: Removing Pulse And Installing Alsa On Squeeze?

Feb 18, 2011

I want to remove pulse and install alsa instead but I can't seem to be able to do it. I tried to search for all packages with "pulse" in their names and purging them but it didn't work because aptitude wanted to remove all of the packages that used pulse with along with pulse.

View 2 Replies View Related

Debian Multimedia :: Amixer Only Controlling Headphone Volume With Alsa And Pulseaudio

Nov 13, 2015

I'm having a problem all the sudden with amixer. set Master 5% used to control the pulse audio master volume. Suddenly, it will only raise and lower the headphone volume. Pulseaudio works, but I no longer have a master volume at all.

View 3 Replies View Related

Debian Multimedia :: Squeeze And Alsa Not Working With Rear Jack Speakers?

May 24, 2010

I'm at the tail end of my upgrade from Lenny to Squeeze and I think this sound issue is the last one I have.
As usual I've tried hunting for some answers but it gets very confusing when people are using KDE or PulseAudio or Ubuntu or slightly different configuration to what I have.

My config:
Debian Squeeze 2.6.32
Alsa (just because I was using that in Lenny and it was working, no other reason)
Gnome
Rhythmbox
Skype

Skype is pretty good - it has the sound configuration built in, so I say ring the speakers and it does. I say talk to the headset and it does. Rhythmbox is my music player (again just because I was using it under Lenny) however it only wants to play through the headset. I can't seem to get it to play to the speakers attached to the rear port.

Summary of some settings (transposed manually)
# aplay -l
*** List of PLAYBACK hardware devices ***
card 0: Headset (Logitech) device 0: usb audio
subdevice 0/1
card 1: Intel HDA device 0: ALC883 Analog

[Code].....

View 9 Replies View Related

Debian Multimedia :: Alsa, Pulseaudio, ION2 & HDMI Sound Output?

Apr 29, 2011

I have recently acquired a Lenovo Q150 machine and attempting to use it as a HTPC. I've been reading that with this platform a newer kernel is required to make wireless, sound and a few other tweaks work correctly--so I bumped up to testing repositories to upgrade to the 2.6.38 kernel.[URL]...

The audio on this device has been more than a pain. I'm currently using XBMC to play media on this device and after setting the outputs to custom: plughw:1,9 sound is played correctly. I found this out by using alsamixer, selecting the sound card with the F6 key (Nvidia 1) unmutting all outputs, quiting, and running speaker-test -D plughw:1,X where X is the sub-device from the output of aplay -l until sound could be heard from the receiver.

Now my problem is that applications like mplayer, and iceweasel won't output any sound. I'd prefer not to use the optical out on the device and would like to send sound over HDMI. Has anyone had any luck getting it to work as it should?

I've also installed pulseaudio, not too sure if this is really needed. I've also used module assistant before upgrading to compile alsa from source, it worked but i just decided to upgrade the kernel instead of dealing with m-a every time an update comes through. Linux floppy 2.6.38-2-amd64 #1 SMP Thu Apr 7 04:28:07 UTC 2011 x86_64 GNU/Linux

apt-cache policy alsa-base
alsa-base:
Installed: 1.0.23+dfsg-2
Candidate: 1.0.23+dfsg-3

[Code]...

View 1 Replies View Related

Debian Multimedia :: Exist Any Repository For Debian Lenny With Games?

Aug 28, 2010

Are exist any repository for debian lenny with games like nexuiz vdrift planeshift etc?

View 2 Replies View Related

Debian Multimedia :: Audio Crackling On High Volumes With ALSA On Intel ICH7

Aug 23, 2015

I'm having some issues with audio crackling/buzzing when turning up the volume, or on songs that have overclipped / overdriven parts, which doesn't happen on Windows (on it those sections are just "dampened"). Is there some certain settings in ALSA that are used to deal with this? Or is it something specific to the driver for the hardware? Speaking of which I'm using some integrated audio which goes by the name of Intel ICH7, and the chip itself is Analog Devices AD1981B.

I'm only using ALSA, without PulseAudio, and I've made sure the volumes both in the media players and under alsamixer aren't turned too high (PCM is at 47% and "Headphones" -- what is "Master" on Windows and on other soundcards under Linux -- is on 22%), so it isn't an issue with the software mixer being turned up too high. Also I'm using a pair of quality headphones (Sony MDRV55) so it's not an issue with the analog audio output either. I've also tried multiple other headphones and the result is the same.

View 4 Replies View Related

Debian Multimedia :: KDE 4.4.x Not In Repository?

Apr 16, 2010

So I recently moved from Ubuntu 10.04 to Debian (I'm tired of Ubuntu assuming everything I want). As much as I like how Debian doesn't result in me uninstalling several hundred MB of packages, it also doesn't have the latest stuff.I'm using sid AND experimental repositories and neither of them let me use the later KDEs. I want the new KDE, its significantly better but I have no idea how to get it with Debian's repos.Also, how am I supposed to install the nvidia drivers in synaptic? I had to download them from nvidia's website and log out into a command line. To make matters more confusing, it asked for gcc 4.4 but I do have that (as well as all other c++ 4.4 related packages). I can ignore the gcc warning and it installs just fine anyway. I can deal with installing the drivers from the command line but its REALLY annoying when you have to do that after every kernel update, so i'd rather have the package manager do it for me.I am so far very unimpressed with the way Debian is maintained. Its missing many packages ubuntu came with too. I have other problems as well but I've managed to fix them or I'll work on them more later.

View 14 Replies View Related

Debian Multimedia :: When Audacious 2.4.2 Will Be Available In Repository?

Apr 20, 2011

I'm using Crunchbang Statler which is based on stable Debian Squeeze and I was wondering if anyone knows when audacious 2.4.2 will be available in the repository?

View 3 Replies View Related

Ubuntu :: Lock All ALSA Packages And Modules To Version 1.0.23?

Jan 30, 2011

I am using 10.04 but i need alsa to be upgraded to 1.0.23 in order for the sound to work. every once in a while when there is a system update alsa gets overwritten and goes back to 1.0.22 which makes the computer unusable. i already locked the alsa packages and it worked now for some time. but today i got another update that did the same thing. the only solution is to do full alsa upragade again. is there really no other way? which packages do i need to lock to keep alsa at 1.0.23? i don't want to move to 10.10 as i planned to stay with LTS. but if there is no other way... funny how debian chose to use 1.0.23 for their next stable edition, while ubuntu LTS stays with 1.0.22 despite it not working on many newer cards. especiall intel ones it seems.

View 6 Replies View Related

Red Hat / Fedora :: Finding The Default Repository Directory For Yum?

Apr 24, 2011

How can i find the default repository directory ?? one of the reasons why i need to know this is so that i can place any new downloaded .rpm files in that directory and then use
> yum install filenameto install that package .. (does that make sense ?? is that a good idea ??)I just installed a new linux and i am trying to get familiar with the enviroment I know that yum gets the source directories from /etc/yum.repos.d but i really couldnt understand the files in there.

View 5 Replies View Related

Debian Multimedia :: Finding An ATI/AMD Gpu Monitoring Application?

Apr 24, 2011

I have searched but I couldn't find anything. I would like something small like a screenlet to monitor fan speed and temperature of an AMD 6970 gpu. So far I could only find for nVidia's products.

View 5 Replies View Related

Debian Multimedia :: Error While Update Kde5 Repository

Dec 19, 2014

The problem is next: when I try to install kde 5 into my debian wheezy system (now have kde4), I add 'kubuntu-ppa/next' repo and then try to make 'apt-get update' from 'su'. But I catch next message:

W: Failed to fetch http://ppa.launchpad.net/kubuntu-ppa/ne ... ce/Sources 404 Not Found
W: Failed to fetch http://ppa.launchpad.net/kubuntu-ppa/ne ... 4/Packages 404 Not Found
W: Failed to fetch http://ppa.launchpad.net/kubuntu-ppa/ne ... 6/Packages 404 Not Found
E: Some index files failed to download. They have been ignored, or old ones used instead.

View 8 Replies View Related

Debian Multimedia :: No More Sound \ Working Before Added The New Repository?

Mar 17, 2011

I installed a new source for multimediaI made the necessary updatessome paquets were created other were deleted.And now I don't have any sound, when it was working before I added the new repository

View 2 Replies View Related

Debian Multimedia :: Unstable Banshee In Stable Repository?

Jul 10, 2011

started using debian for the first time and I have a problem. I've installed Banshee from the stable repository (only stable main contrib and non-free are in my sources.list) but when i start the program it says:

Running Banshee 1.6.1: [Debian GNU/Linux unstable (sid) (linux-gnu, x86_64) @ 2010-12-02 15:13:12 UTC]
error: line 3: bad flagvector

[code]...

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved