Software :: Add Another Drive Image To An Existing VM Using VirtualBox?
Aug 31, 2009
I have an issue with VirtualBox. My current setup is a machine running Fedora 10 with 1 Tb of disk space. I installed VirtualBox and created a fixed size disk image of 50 Gb for a virtual Windows XP64 OS. Now I require more disk space with additional 100 Gb. Is there a way to add another partition to the virtualized OS as if I added a new hard drive to the system?
In other words, I'd like to create another disk image by using additional space from the same physical drive and mount it under Windows XP in VirtualBox.
View 2 Replies
ADVERTISEMENT
Jan 4, 2011
I installed in my Slackware 13.1 with generic kernel 2.6.33.4-smp VirtualBox packages taken from SlackBuilds.org (acpica, virtualbox-ose and virtualbox-kernel). Then for testing purposes I installed in VirtualBox Windows XP using CD-ROM drive connected to USB port. It's a lot of fun to see Windows as an application in Linux!
Now I'm trying to install in VirtualBox Linux Mint using either USB flash drive prepared with unetbootin or mere ISO image. Without success. It seems VirtualBox 3.2.10 OSE doesn't recognize either USB flash drives or ISO images though it recognizes CD-ROM drive connected to USB port. I found some advices searching Internet but all of them are useless.
View 12 Replies
View Related
Mar 15, 2011
I am posting this in the "Desktop Environments" section on the theory that the VirtualBox is indeed a desktop environment.
Bottom lines first - maybe it will make the whole essay below superfluous. Do I need to use the Windows-7 installation disk to install the "guest" OS into this virtual box? (This is the main question.) I suspect it is, after the prompts I get trying to run my guest OS for the first time. Since I have a dual-boot anyway - with Win-7 as the main OS on the machine - is there any way I can configure Virtualbox to use the existing Win-7 installation as a guest OS, without damaging the Windows partitions?
Now the rest of the story:
I just deleted about 100 lines of torturous details, realizing nobody will want to read through all that. 1. Question 2 is optional - I have a 400GB mounted file system on a huge Seagate drive for my guest "hard drive".
View 2 Replies
View Related
Dec 10, 2009
How do I import an existing Virtual Machines, like if I have a dualboot and make a new VM in the other OS or if I reformat and transfer the files back in.
View 4 Replies
View Related
Feb 2, 2009
i am planning on installing virtualbox on a fedora 9 machine and would like to know if it is possible to migrate another fedora 9 (totally seperate) machine to a virtualbox as a guest OS.
View 1 Replies
View Related
Mar 22, 2010
I have just finished installing (after hard work ) Centos 5.4 x86 configured with Snort & Snorby as frontend web, i would like to create from this installation kind of image that could fit to almost any hardware type.
View 2 Replies
View Related
Jun 15, 2009
I have 2 image files, image 1 which is 16MB, has multiple partitions, where the boot partition has a 2.4 kernel in it, and image 2, which is 32MB, has a single partition with a 2.6 kernel.
I wish to add those extra partitions from image 1, into image 2, either by adding them within the 32MB(which means cutting back on the size of the existing partition), or adding them to the end of the image(which means extending the image beyond 32MB).
The boot partition for both images is ext2, while the rest of the partitions in image 1 is just raw data.
I'm working with these images in Mandriva Linux 2009.
How can I achieve what I want to do? I think it should be with fdisk and/or mkfs but I'm not sure how? I've tried using gparted to regenerate the partitions from a new image file with the following steps:
dd if=/dev/zero of=image.img bs=32M count=1
gparted image.img
Then I created a 30M boot partition. However, I'm not able to create the rest of the partitions as they are smaller than 1MB, which seems to be the min supported. I need precise control of the start/ending sectors of each partition.
View 1 Replies
View Related
Jan 3, 2011
I had set up 4 virtual machines on centos 5.5 system where I directed the image locations to an external storage. I have lost the image files in the storage, but I have the image files that were copied from the virtual machine image location. I want to put up the same system on the same computer by copying these backup images. However, when I copy the image file to the same exact location and start the corresponding virtual machine I get "no bootable disk" error. When I increase the size of the image using "qemu-img" commands, I can get rid of this error, but get "error reading disk" error. Is there a way to overcome these problems, or is it not possible to restore a virtual machine by copying the machine image file under ..../xen/images?
View 1 Replies
View Related
Jan 10, 2011
I'm looking for a way to create a live cd from the existing image. I'd like to include some sort of installer, I've found gui remaster utilities, but none for the shell only. I need to setup the image to automatically login, so the user could just pop in the cd and start it up without a monitor or keyboard.
View 10 Replies
View Related
Feb 16, 2011
I was given a forensic Image which I now know is a DD image of the drive (Vista) and am trying to mount the image or extract the image to another drive. I'm not sure of the extention type or if the image is a partition or the entire drive. I think it is the entire drive.
Is it possible to mount a DD image to a device. If I can't do that I just want to extract the files to run some programs against the drive. Can I view the files under Ubuntu or do I have to remove the drive and stick it into a Vista computer.
I purchased a second drive today and was hoping the command line would be something simple.
Or am I on the wrong track, should I be doing this all in a windows environment. The reason I picked ubuntu was because of the reporting tools.
View 9 Replies
View Related
Apr 3, 2010
I am using opensuse 11.2 kde 4.4.2 . I had a working installation of sun virtualbox 3.1 with its virtual image on an ntfs partition before upgrading kde, then I upgraded from KDE 4.3 to 4.4. Now when I start sun virtulabox it gives an error stating that it cant access my hard disk image file due wrong permissions and that the image is read only. I cant create a new image on that partition due same problem but I can create one on my home partition.
View 7 Replies
View Related
Apr 17, 2010
Is a VMWare image compatible with Virtualbox? Or do I have to install VMWare to use the VMWare image. I only ask as I prefer Virtualbox.
View 1 Replies
View Related
Aug 26, 2010
I'm using the Virtual box on Ubuntu which has Windows XP on it. Probably after WinXP was automatically updated, I started getting an error message: "DLL C:WINDOWSsystem32DNSAPI.dll is not a valid windows image." and I cannot log on anymore. I tried to find a solution but since I'm using the Virtualbox, I don't know how to access the virtual "Windows folder" from Ubuntu
View 7 Replies
View Related
Aug 21, 2011
Yesterday I got my new workstation featuring:
120 GB - OCZ Vertex3 MAX IOPS
300 GB - Western Digital Velociraptor (10k RPM, about 4ms avg. seek)
2x2TB Samsung Ecogreen F4
The system will be running Ubuntu with the main purpose of doing lots of Java development. Occasionally I have to develop Java in a Windows VM; for this I need fast VMs. I read a lot about SSD wear and maybe it is a bad idea to put the Eclipse workspace on the SSD, because of all the little writes the builds do. Perhaps the workspace (and thus /home) might find a better place on the Velociraptor which is real fast. How should I partition the whole thing to get the most out of it. LVM might be an option, too. Maybe putting a third partition on the SSD for one VirtualBox image. Currently I am thinking:
SSD: 2GB /boot, remaining space for / Velociraptor: LVM spanning the whole drive. 150GB /home Remaining Space for /virtualMachines or something like that Samsung drives (LVM over both or one Volume Group for each? - Latter would be better in terms of data security, because if one drive in a big volume group fails everything is lost)
View 1 Replies
View Related
Mar 23, 2011
When I created the disk, I specified dynamically growth, but when I tried to copy a file larger than the available disk space (500MB), a message showed up saying that it couldn't be done.
Image resizing was added with VirtualBox 4.0:
VBoxManage modifyhd
<uuid>|<filename>
[--type normal|writethrough|immutable|shareable|
readonly|multiattach]
[--autoreset on|off]
[--compact]
[--resize <megabytes>|--resizebyte <bytes>]
So why my VirtualBox 3.2.8 let me create the disk with dynamically growth option??
View 4 Replies
View Related
Jul 1, 2011
I recently ran across a client that wanted me to set up a new IDE Drive in his existing Red Hat Server. I reluctantly agreed to try. I am completely uneducated in Linux and could use some input. The server itself appears to be set up in text mode as all that I see is text after the initial boot up screen goes away. It, at present is set up in an old dell machine on a 3 Gig drive and all he wants is to be able to add a secondary drive to extend storage capacity. What do I need to do to prepare the drive and OS to accomplish the task? The secondary drive is 120 Gig. I reformatted the drive, as a fat 32 and installed it into the machine. The board sees it. The network does not
View 7 Replies
View Related
Nov 17, 2010
I installed ubuntu 10.10 on my laptop and configured a lot(mainly setup git, heroku, rails etc), installed and setup lot of things on it to suit my needs. Now I want to move this setup to another machine and want to avoid all the setup again. Is there a way I can create an installer out of my existing ubuntu installation/partition which I can reuse for other machines?
View 2 Replies
View Related
Jan 26, 2011
I am using ubuntu 10.10 (maverick meerkat), and i am loving it. While installing, i hadn't created multiple partitions. But now i feel the need to create a few. How can i repartiton the hard drive without reinstalling?
View 9 Replies
View Related
Oct 21, 2010
I want to move my "currently installed Debian and its all settings" to a USB flash drive. I am wondering what methods are available out there. I looked into Remastersys but it failed on my system so I am wondering if there is another method available?
View 2 Replies
View Related
Jul 31, 2011
I have an existing Fedora 15 system installed from scratch.I've ordered a harddrive identical to my SDA and want to add it to my existing system as a RAID1 setup.I've googled around and cannot find recent clear instructions how to accomplish this. I don't want to reinstall everything from scratch. It should be possible to create the RAID1 using the existing data disk and then mirror everything up?
View 1 Replies
View Related
Aug 15, 2011
I want to be able to add a physical drive to an existing filesystem, and PRESTO! That filesystem has more storage and/or redundancy. When one of the physical drives eventually fail, no problem, Ive lost some redundancy, I just have to install a new drive before another one fails.Lets assume I have 4 physical drives.*What Is This Configuration? *[URL]...But I am unclear how to get a logical volume that is mirrored and linear.
The last time I tried software RAID 1 (dm-x) under lvm, it was very fragile. Systemd could not start it,and then an update to mdadm put a stake through its heart. So I know that does not work.
View 5 Replies
View Related
Aug 13, 2011
I have successfully installed 11.04 onto my existing Windows laptop as files contained in the windows system and have dual booting.I would like to copy this installation to a 5gig fast usb stick so that I can retain all my settings etc
View 2 Replies
View Related
Feb 10, 2010
I have Fedora 12 installed on an external harddrive (USB) and have it configured the way I want. Inside my laptop I'm working on I have a Win 7 installation. My plan is to slowly migrate to Fedora and only use Win 7 when needed, so far so good..
I shrinked the partition on the internal drive holding using Win 7's built in tools and would like to clone my USB installation to the new partition I can now create, I work a lot with Macs in my line of work and there I always use Carbon Copy Cloner to make bootable backups, works like a charm..
As far as I know CCC uses rsync which is available for Linux as well so I guess I could use that? I plan on editting the Win7 bootloader later on to make it possible to boot from the new Fedora partition.
How would I go about it? The internal drive is GUID (or is it GPT?) formatted and loosing the Win 7 installation isn't an option of course.. All I could find were commandlines to backup certain folders or entire drives but I only want to backup my partition onto a different partition..
View 4 Replies
View Related
Jul 31, 2009
I have a SATA hard drive from a crashed system that was running Ubuntu 8.04. I want to install it in a Ubuntu 8.10 system and use it for file storage. How do I install and reformat it?
View 3 Replies
View Related
Nov 9, 2010
I have a running RHEL5 system, which has two physical disk drives, but is currently running on a single drive of the pair. The single drive the system is running on contains a root/boot partition and a swap partition. I would like to be able to add a mirror drive to this existing setup without having to disturb the running system (much). That is, I don't want to have to completely dump, reinstall (creating the mirror on the way up), and reload from backup media if I can avoid it. I have seen procedures that go as follows:
- the "extra drive" (the one not being used as the current root/boot device) is first brought under LVM control as a root object with one physical mirror attached.
- the data from the running root/boot drive is rsync-ed over to the LVM-controlled half-mirror, and boot records added.
- System rebooted on newly created half-mirror.
- Original root prepped to be second side of LVM mirrored root, and is added in.
Can one boot from an LVM disk directly? There seems to be some question on this that came up in other lists I had read online.
View 5 Replies
View Related
Feb 6, 2010
I am trying to install ubuntu 9.10 on an system which already has XP installed. I had used Ubuntu earlier but when I installed XP ( in an attempt to dual boot) I seem to have lost the Ubuntu Installation. But the problem is GParted or the Ubuntu installer dont recognize the existing partitions but instead see it as an empty unallocated drive. I have a 120GB hard disk. Below is the extract after fdisk:
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4fa8a60b
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4fa8a60b .....
Also this is how the disk Utility in Ubuntu sees my system: ( See attachment)
[IMG]file:///D:/Screenshot.png[/IMG]
View 9 Replies
View Related
Nov 30, 2010
I have a home network that includes a couple of computers {A, B, C, D}. currently, I have a cron jon that runs every minute and updates (using rsync) the hard drives of computers {B, C, D} with the contents of hard drive {A}. So far everything works great, as hard drive {A} barely has any information on it. Now, I am about to copy a lot of information (about 8 GBs) to hard drive {A}. Naturally, the cron job will run (as it runs every 1-min) and try to 'sync' the contents with hard drives {B, C, D}.
Given my network (100Mbit/sec), there is no way the cron job will be able to 'copy' the contents to hard drives {B, C, D} in one minute. It will take much more time. Does this situation create a problem? meaning, will cron re-run a new rsync instance 1min later, even though an existing rsync process is running and still copying information to hard drives {B,C,D}? Will my backups be hurt / slowed down tremendously because of this?
View 2 Replies
View Related
Aug 5, 2010
I wish to create a bootable disk for my existing grub legacy. I do not have a floppy drive. Could this be done on a CD-RW or flash drive?
View 1 Replies
View Related
Mar 24, 2009
I am currently running Ubuntu 8.10 amd64 on a single 750GB drive. My question is whether or not I can add two more drives (say 2 500GB drives) in a raid 0 array leaving the OS and data on the original drive? I find my self working with some very large files and I would like to speed up their processing time. At the same time, I would like to leave my current configuration in place without touching the OS or my data. I'm not much of a hardware guy.
View 4 Replies
View Related
Mar 23, 2010
I had a drive that kept kernel panic'ing so my data center recommended using the spare hard drive to reinstall OS on, and import the data from the old drive. (they checked the hardware, it wasn't the hardware) The new install is done, and I need to mount the old drive and get backups off it since my data center does not provide management whatsoever.
It's the same OS on both (Cent OS 5.4 32-bit) I'm an advanced user on windows, but linux gets me. I can ssh in, do basic stuff like setup IP ranges and restart services. I normally navigate the box through SFTP so I have a gui. WHM shows me my drives as such
Found Disk: hda
Found Disk: sdb
so I'm assuming SDB is my old drive and the drive I need to access. I attempted to follow instructions on
cyberciti.biz/faq/freebsd-adding-second-hard-disk-howto/
but I'm assuming FreeBSD would work differently and I wasn't totally sure what the labels of the file systems should be.
View 1 Replies
View Related
