General :: Installing A Second Hard Drive That Has Existing Ubuntu8.04 Installed

Jul 31, 2009

I have a SATA hard drive from a crashed system that was running Ubuntu 8.04. I want to install it in a Ubuntu 8.10 system and use it for file storage. How do I install and reformat it?

View 3 Replies


ADVERTISEMENT

General :: Mount A Hard Drive With Pre-existing File System And Data?

Mar 23, 2010

I had a drive that kept kernel panic'ing so my data center recommended using the spare hard drive to reinstall OS on, and import the data from the old drive. (they checked the hardware, it wasn't the hardware) The new install is done, and I need to mount the old drive and get backups off it since my data center does not provide management whatsoever.

It's the same OS on both (Cent OS 5.4 32-bit) I'm an advanced user on windows, but linux gets me. I can ssh in, do basic stuff like setup IP ranges and restart services. I normally navigate the box through SFTP so I have a gui. WHM shows me my drives as such

Found Disk: hda
Found Disk: sdb

so I'm assuming SDB is my old drive and the drive I need to access. I attempted to follow instructions on

cyberciti.biz/faq/freebsd-adding-second-hard-disk-howto/

but I'm assuming FreeBSD would work differently and I wasn't totally sure what the labels of the file systems should be.

View 1 Replies View Related

Ubuntu :: How To Repartition Existing Hard Drive

Jan 26, 2011

I am using ubuntu 10.10 (maverick meerkat), and i am loving it. While installing, i hadn't created multiple partitions. But now i feel the need to create a few. How can i repartiton the hard drive without reinstalling?

View 9 Replies View Related

General :: Move A VB Installed OS To Actual Hard Drive?

Jan 2, 2010

I did a quick search but came up with nothing. I'll list things in point form to make it less confusing

-I'm running Ubuntu 9.10 with GRUB 1.97

-I have Windows 2000 installed on VirtualBox

-I have an NTFS partition with just music and my data on it, but no windows OS

-I want to take what I have on VirtualBox and put it on my NTFS partition

View 4 Replies View Related

Ubuntu :: Existing Rsync Running And Copying Info To Hard Drive?

Nov 30, 2010

I have a home network that includes a couple of computers {A, B, C, D}. currently, I have a cron jon that runs every minute and updates (using rsync) the hard drives of computers {B, C, D} with the contents of hard drive {A}. So far everything works great, as hard drive {A} barely has any information on it. Now, I am about to copy a lot of information (about 8 GBs) to hard drive {A}. Naturally, the cron job will run (as it runs every 1-min) and try to 'sync' the contents with hard drives {B, C, D}.

Given my network (100Mbit/sec), there is no way the cron job will be able to 'copy' the contents to hard drives {B, C, D} in one minute. It will take much more time. Does this situation create a problem? meaning, will cron re-run a new rsync instance 1min later, even though an existing rsync process is running and still copying information to hard drives {B,C,D}? Will my backups be hurt / slowed down tremendously because of this?

View 2 Replies View Related

General :: Erase Everything On Hard Drive Before Installing?

Jun 22, 2011

After installation, when starting to boot, I have several choices showing:

1)Ubuntu, w/ Linux 2.6.38-8-generic pae
2)Ubuntu, w/ Linux 2.6.38-8-generic pae (Recovery Mode)
3)Memory test (memtest 86+)
4)Memory test (memtest 86+, serial console 115200
5)Windows Server 2003 For Small Business Server (on /dev/sdd1)

I used #1 and I only have a blank screen.
I used #2 and I went into recovery mode, but I keep getting the error message: "No root
file system is defined. Please correct this from the partition.

I just want to erase all of numbers 1 to 5 and start clean. what should I do?

View 8 Replies View Related

General :: Installing To A Netbook Without A Hard Drive?

Feb 24, 2010

I bought a MENQ easy PC e790 with 2GB flsdh memory and 128 M RAM but no hard drive. It comes with Windows CE 5.0 The specs are as follows:

CPU: Samsung 400MHz/533MHz processor
RAM: 128MB
ROM: 2GB
OS: Microsoft Windows CE 5.0
Pixel resolution: 800 x 480 pixels
code....

How can linux be installed in CEs place and what distro would be best?

View 5 Replies View Related

General :: Installing Red Hat 4 On SATA Hard Drive

Oct 20, 2009

I tried to load Red Hat Linux 4 on my PC, which has 945 MB, Core 2 Duo Processor, 2GB RAM, 250GB SATA HDD. But i couldnt do so as it did not detect the hard drive and was asking for drivers. I changed the SATA settings to Legacy but still it didnt recognise the HDD...I have Windows XP SP3 also installed on it.

View 2 Replies View Related

Software :: Ubuntu Installed On External Hard Drive, Can't Startup Without External Hard Drive?

Jan 14, 2009

I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external

When I startup without my ext drive =>GRUB error 21.

And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...

I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.

View 14 Replies View Related

General :: Installing Debian On External (connected Through USB) Hard Drive?

Apr 23, 2011

I've got Vista installed on my notebook and I've bought an external drive (1,5 TB, but its size shouldn't matter in this case) and after formatting it I left 10 gigs for future purpose. Now, I decided to install 64bit debian on the unallocated 10 gigs. And so I did. To be precise: I have SATA drive inside my lap and hard drive (it's also SATA inside the cover) connected to my lap through USB. Boot sequence was 1)CD/DVD 2)hard drive 3)removable drive. During the installation the installer detected my internal drive as /dev/sda and my external drive as /dev/sdb. I decided to install grub on /dev/sdb (it was logical to me, since I didn't want to mess up my regular drive's MBR). Installer created 5 partitions on my USB drive. After booting from my external drive (look below*) I've got a message saying

Code:

error: no such partition Entering rescue mode... and after that I was in grub rescue console. When I typed ls I've got an output

Code:

(hd0) (hd0,msdos1) (hd1) (hd1,msdos5) (hd1,msdos2) (hd1,msdos1)

When I tried to type

Code:

ls (hd0)/

I only got a message

Code:

error: unknown filesystem This occured for all the listed devices... On my internal drive there were (during the installation and running the live cd) 3 partitions detected (vista os, data, rescue disk) so I don't understand the output that ls in rescue console gave me. about booting from external drive: I did that after pressing ESC - I've got a prompt to choose which device I want to boot from - this wasn't working properly; after changing the boot sequence the grub started but with the abovementioned error message...

If there's any info about exact names/types/devices of my installed partitions needed I will run live CD and check it. If any other info is required I will provide it (I tried to describe the problem in the most precise way ) What I was thinking about: maybe there is a problem with ordering of the devices - when I boot from DVD my removable disk is treated as the "second one" and after booting from the removable disk it becames the "first one" or something like that? If any of you have any good info on how mapping of the device names works it would be appreciated, since I couldn't find anything useful or I just don't know what to ask google about.

1) How to install Debian on a removable disk (I had no problems with installing Linux on pendrive but I did that from VirtualBox and it was some time ago) OR how to install GRUB on a removable disk? (unfortunately, I cannot install 64bit system through VirtualBox)

2) What's the logic behind naming devices under /dev? How come the devices in grub have their names mapped as hdx etc and I've read that hdx are the names for IDE/ATA drives and sdx is the proper name for a SATA or USB device

View 3 Replies View Related

Ubuntu :: 10.10 Installed On A 40gb Hard Drive And Have Setup Arch On A Seperate 160gb Drive?

Feb 12, 2011

i have ubuntu 10.10 installed on a 40gb hard drive and have setup arch linux on a seperate 160gb drive and am at the Choose bootloader screen of Arch Linux. My question is do i use arch linux to reinstall GRUB or do I choose none and configure GRUB to see both? if its the later can you tell how. Oh and Ubuntu is on sda and Arch is on sdb

View 6 Replies View Related

Ubuntu Installation :: Installing 11.04 On External Hard Drive Drive?

Jun 19, 2011

I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation

Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.

View 2 Replies View Related

General :: Upgrade Internal 2.5" Hard Drive Vs External Usb Hard Drive For An Old Laptop?

Jan 25, 2010

I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...

View 2 Replies View Related

General :: Move Smaller Hard Drive To Partition On A Larger Hard Drive?

Mar 16, 2010

My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.

Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.

View 3 Replies View Related

General :: Not Recognizing 'new' Ubuntu8.1 Disk When Attempt To Add Program Packages In Gnome?

Nov 22, 2010

adding some program packages doesn't seem to be working out of add/remove, asking me to insert Ubuntu 8.10 _Intrepid Ibex_ - Release i386 (20081030) which i believed to be the 8.1 desktop release i received with the laptop. doesn't recognize it. is this the wrong cd?

View 3 Replies View Related

Ubuntu :: Have Installed On The External Hard Drive?

Mar 29, 2010

I have another question. When again restart the computer, I lost everything I had installed before. I am sure there is option somewhere to be turned on. I do not know where it is? Is there anybody can tell me where it is? I have installed UBUNTU on the external hard drive.

View 9 Replies View Related

Ubuntu :: 9.04 Installed On Hard Drive But Unusable

May 15, 2010

I've installed Ubuntu 9.04 on my hard drive. The results are worse I keep getting segmentation fault errors, black screens, lock ups, etc. This time I can't get it as stable as on Wubi. It can't stay stable more than 3-4 minutes - then the interface blinks and goes to black screen or shows weird colored strips/squares, locks up or shows tons of errors in the terminal. I did the kernel recovery mode partition check, no errors were found. I installed 9.04 on my harddrive, everything works fine, I log in and it stays great for about 1 or 2 minutes, then it freezes.

It shows the terminal with 'segmentation fault' errors, or goes to black screen and locks up. Alt+SysRQ+B is the only solution and sometimes it doesn't work either. I got Ubuntu 9.04 running through Wubi before and it ran perfectly stable occasionally on few boots. But I can't get it like that on my hard drive installation It just keeps crashing. I did a long memtest (10 tests passed), ubuntu file disk check went fine, my current operating system Windows 7 runs great and another Live CD Linux based system like Knoppix runs perfectly stable. Should it be a driver issue?

View 4 Replies View Related

Ubuntu Installation :: XP With Existing Setup (Partitions) - Error "Setup Did Not Find Any Hard Disks Installed On Your Computer"

Feb 18, 2010

I'm using Ubuntu 9.10 and previously had a separate partition with another distro on it. I decided to delete the other distro's home and swap partitions and install XP in place of it. I've been following these instructions: [URL] and [URL] I have gotten to the point where I am booting to the XP CD and want to install it, but I get the message, "Setup did not find any hard disks installed on your computer" when I should be getting to the screen that asks me to select a partition to install XP on. This is what my HDD looks like in GParted:

I want to install XP in the unallocated partition, but I have a feeling I screwed up somewhere along the way and probably don't fully understand the whole thing. Even if I try to format the unallocated partition to NTFS I can't make it a primary partition (I assume because it's within sda2). The very last thing I want to do is delete my Ubuntu partition and start from scratch, but if that's my last option let me know.

View 4 Replies View Related

Debian Installation :: Net Install From Same Hard Drive To Be Installed On

Oct 24, 2015

I am trying to install Debian onto an IBM ThinkPad 240X. The 240X will only boot from either an internal IDE hard-drive, or an external floppy-drive. For now, I have decided to ignore the option of using the floppy drive. I have other computers to support the process, an IBM ThinkPad T43p (Pentium M) as well as my primary laptop, a ThinkPad X200s (Core2 Duo). I have tried installing the hard-drive to be used into the T43p, then booting the Debian NetInstall from a USB thumb-drive, installing as usual, then transferring the hard-drive into the 240X. This does not completely work; GRUB and LILO will load, but the computer freezes very early (almost immediately) in the boot process.

Please note, I am trying this on a CF card. The 240X has an IDE-CF adapter, and my X200s has a USB-CF reader.So, I want to try to load the actual Debian Net Install on the 240X. Ideally, it will happen something like this; I will partition the hard-drive into these 2 partitions:

sda1: the Debian Net Installer
sda2: an empty partition waiting to have Debian installed onto it URL...

but the part I do not understand is how to get GRUB or LILO installed onto the CF card. I am wary of running commands such as "grub-install" as I do not want to mess up my GRUB install on the computers this command would be run from. If I run a command such as this, I would want it to ingore everything about the computer it is being run from, and only modify files or install onto the CF card. I would not want it to acknowledge the computer it is being run from as far as available installs, architecture, etc.

View 7 Replies View Related

Ubuntu :: Grub Not Booting After New Hard Drive Installed?

Jan 15, 2009

I installed a new hard drive to my system. I use a program called R-Drive image to copy all my os to my new drive. It done a pretty good job too, its an exact copy. I deleted the old one. But obviously now I cant boot. I had a look at the menu.lst file i dont know what to change it to. heres my drive setup,

C: - Windows Vista - Ubuntu
D: - Documents - Swap File
E: - Games

View 9 Replies View Related

General :: Installing To A Wiped Hard Drive / "unable To Read" Errors?

May 14, 2010

I recently got a computer donated to me for free from my Computer Science class, as the teacher couldn't figure out what the problem was that was preventing him from booting to the startup screen (all I could figure out was that the slot the memory card was in was bad, so I switched slots and got it working). The hard drive on the computer was wiped with a disk nuker called DBAN. Now I would like to install a Linux OS on the computer, but whatever disc or distro I try gives me similar "unable to read" errors. I would like to know if there's anything software-wise I need to do before attempting to replace any hardware. An example of the error I'm getting is as follows (using a mandriva livecd):

/etc/rc.d/rc.sysinit: line 1281: /var/log/dmesy: Read-only file system
SQUASHFS error: sb_bread failed reading block 0xa6e58
SQUASHFS error: unable to read cache block [29b963ea:782]
SQUASHFS error: unable to read directory block [29b963ea:782]

Anyone know what I need to do to get this fixed so that I can install a Linux distro?

View 5 Replies View Related

General :: Creating Image From Existing Installed CentOs

Mar 22, 2010

I have just finished installing (after hard work ) Centos 5.4 x86 configured with Snort & Snorby as frontend web, i would like to create from this installation kind of image that could fit to almost any hardware type.

View 2 Replies View Related

Ubuntu :: Cannot Change Ownership Of Newly Installed Second Hard Drive

Jan 6, 2010

Recently, I decided to wipe my system, put in two 250GB hard drives and rebuild my home file and print server. One of the hard drives is a SATA drive, and the other is not. In any event, they are identified as /dev/sda and /dev/sdb in Gparted. So far so good.

Working on (reading from/writing to) the first hard drive (where the OS is installed) is no problem. However, I have had difficulty trying to get my system to recognize my second hard drive and then allow me (nate) to read and write to said second drive. I followed these directions from the ubuntu community web page during installation:

[URL]

and setup my second hard drive with an ext3 file system. The drive is /dev/sdb. The PARTITION is /dev/sdb1. The MOUNT POINT is /media/TheBase250.

The problem(s) begin at this point. I cannot:

1. Unmount the volume at my will-error says that only root can unmount

2. I am not sure if the command sudo chown -R nate:nate /media/TheBase250 allowed me to take full ownership of said drive. It appears as if nothing changes when I run this command in terminal (even when I am root) Moreover, I cannot give myself permission to read and write files to the drive.

3. However, when I open up nautilus, browse to "TheBase250", right-click in the corresponding "explorer" or "finder" window and look at the properties for the drive, it says that "nate" is the owner (under the permissions tab), but again, I cannot give myself FILE read/write capabilities, nonetheless anyone else. When I try, all that happens is the corresponding box goes back to displaying "---"

4. Interestingly, if I skip nautilus and double-click on the drive from my desktop, again, logged in as nate (only user account created) and then proceed to right-click on the window that opens up, click properties, half the time it says that I cannot make changes to the permissions because I am not "nate." Well, last time I checked, I am nate, and this is, albeit delinquent, my computer.

5. Another piece of information that may be helpful is that if I simply right-click on TheBase250 drive icon on my desktop itself, navigate to the permissions tab, the dialogue box says that "The permissions of "TheBase250" could not be determined"

Some additional information that may be helpful is the output from my fstab file. So, for your benefit, here is the output (the stars are not part of the file, but only to help improve readability):

************************************************** *****
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).

[Code].....

View 9 Replies View Related

Ubuntu :: Can Mount A Installed Hard Drive - Lost All My Stuff

Jan 24, 2010

I was trying to install a new hard drive and in the process have managed to not only format my old hard drive but lost all my stuff as well. I am running a live CD but unable to mount the said hard drive. I Know its there.

fdisk tells me:

As you can see its still registering as /dev/sda, I am unable to mount this to run a undelete program on it.

a e2fsck tells me

The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device>

View 4 Replies View Related

Ubuntu :: Install Grub2 From Live Cd WITHOUT Installed On Hard Drive?

Jun 10, 2010

Is there a way to install grub2 from a linux live cd when linux isn't installed on any of the partitions? I'm setting up a multiboot partition for someone and I don't want to install linux anywhere on the computer since hard drive space is running short.

View 2 Replies View Related

Ubuntu Installation :: Installed 10.04 On A New Hard Drive - Windows Won't Boot

Jun 11, 2010

So I JUST installed 10.04 on a new hard drive for the third time. I had it completely wipe the hard drive and install ubuntu itself (so i couldn't mess anything up). Well NOW it won't even boot up ubuntu much less my windows hd.

So the setup is, my first harddrive which is 640gb and has my windows on it, and then my second harddrive which is 80gb and has my freshly installed ubuntu 10.04 on it. Neither will load. I don't even get a loading screen, I just get a flashing line after my mobo's splash screen.

I ran some boot loader info script and one of the first lines was

Code:

No boot loader is installed in the MBR of /dev/sda

View 9 Replies View Related

Ubuntu Installation :: Format Hard Drive With GRUB Installed

Jan 17, 2011

Upon installation of Ubuntu a while back, i was using a windows xp machine with two different harddrives. Instead of formatting the xp drive and installing Linux, i decided to install Linux on the secondary harddrive. This worked all fine and dandy until recent, when I have found my linux drive filling up near capacity. I would like to format the XP harddrive and mount it in linux to give some more disk space. The problem i have found, is that the XP drive is the drive with GRUB.

View 3 Replies View Related

Hardware :: Hard Drive - Installed Ubuntu In Automatic Mode

Feb 9, 2010

I have installed ubuntu in automatic mode. when i removed it from computer by removing partition(let E by going to disk management in xp, the portion of drive where the ubuntu was installed automatically get primary partition. then i created the new drive from that partition in XP(let E. Later on when my XP got corrupted and i installed fresh xp then when i tried to access the drive i created(E says the file system not supported need to format the disk.

Also when i tried to install fresh copy of linux in those partition it never get install on those partition.

Now the issue is i cannot use those partiton due to fear that incase windows get corrupted my all data in that partition will be gone. Currently i am not having any linux on computer due to shortage of disk space.

View 1 Replies View Related

Slackware :: Adding 2 More Hard Drive As One Partition In An Already Installed Machine?

May 17, 2011

Currently I'm running a smaba on slackware 13.1 with a 1TB Hard drive for dumpng files rather than sharing. My partition table is as follows:

#####################################################################
/dev/sdb2 swap swap defaults 0 0
/dev/sdb1 / ext4 defaults 1 1
/dev/sdb3 /home ext4 defaults 1 2

[code]....

Now that i need to add 2 more 1TB hard drives and I want to stripe these two drives to make one partition for large space.

View 4 Replies View Related

General :: Installed Open Webmail - Existing Users Cannot Login

May 18, 2010

I am using qmailserver. I login through webmail but today I installed openwebmail instead of webmail. Its ok, but I cannot login my existing users. It login only new users which I created. and email id come with fully qualified name like saran@www.example.com, so I need saran@example.com. How I do this?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved