I am trying to install ubuntu 9.10 on an system which already has XP installed. I had used Ubuntu earlier but when I installed XP ( in an attempt to dual boot) I seem to have lost the Ubuntu Installation. But the problem is GParted or the Ubuntu installer dont recognize the existing partitions but instead see it as an empty unallocated drive. I have a 120GB hard disk. Below is the extract after fdisk:
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4fa8a60b
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4fa8a60b .....
Also this is how the disk Utility in Ubuntu sees my system: ( See attachment)
[IMG]file:///D:/Screenshot.png[/IMG]
I installed on LUKS+LVM, and I want to preserve my /home without moving the data to any external media (I don't have any). My partition layout is as follows:
sda1: /boot sda2: encrypted volume (sda2_crypt) sda2_crypt: LVM volume group, with /, swap and /home.
Having many previous (sad) experiences with completely borked experiments and data loss, I've decided to try the trick in VirtualBox first. I've installed Debian (testing, netinst, Dec 2009) with encrypted LVM, and touch'd a file in my $HOME so that I'd know if the contents were preserved. Then proceeded to install Ubuntu 10.04.1 from the alternative CD. After the installer started and loaded some of the basic components (but before it entered the partitioner) I've switched to a shell and read a scroll of identification:
* Another concern; after the installation, I've noticed that the contents of my $HOME were overwritten by Ubuntu's default skeleton (pictures, desktop, music, templates, and other crap). The control file I've touch'd after installing Debian wasn't there.
I have reinstalled XP and conseqently messed up Grub and lost Ubuntu. I am trying to do a fresh install but the installer insists on trying to overwrite the whole disk. I downloaded the alternate instal ISO as this has got over this problem in the past but this also wanted to overwrite the whole disk. It recognises the Sata Raid array as being nfts (this is my main data disk) but it doesn't recognise the existing partitions on my main disk:
The thing is I want to install Ubuntu alongside my Win 7 32-bit OS on its own partition. I have four partitions: System Reserved (made automatically by Win 7), System (where Win 7 is installed), Ubuntu (which is a partition I made during the installation of Win 7 that is empty) and Data (where all my documents, music and such is at).
The problem is that when I get to the point in the installation of Ubuntu where you choose where to install it, Ubuntu doesn't recognize any partitions at all! So to install Ubuntu I would have to erase everything which I would very much like to avoid - moreover I read it was better to begin with installing Win 7. If I choose to 'Try Ubuntu' and thereafter open GParted this is what it looks like:
The weird thing is that when I open 'Computer' I can see the different partitions and even open the partitions and files on them. It seems to work the way it should. When I open a drive it creates a shortcut on the desktop. So when I've entered all of them it looks like this: This is how the partitions look like in Win 7:
The reason why the Ubuntu drive is FAT32 is because I tried formatting the drive while in 'Try Ubuntu'-mode. It didn't work with NTFS either. The harddisk is a Samsung HM251JJ ATA. Why can't the Ubuntu installation read my partitions? There's even a partition ready for it. And as I wrote I have looked at a great deal of threads but can't find out what to do.
I've configured my RHEL system to be used as tftp server. I've configured NFS,VSFTPD and DHCP too. Everything works fine, the clients are able to boot from PXE and get the kickstart information from the server and the installation completes successfully. Now the problem is the RHEL installation removes all the existing windows partitions. How do I make my system a dual boot? I've configured my kickstart to use "Remove existing Linux Partitions" and the problem still persists.
I've been running Fedora Core 3 on a P4 450 as a personal Samba server and domain controller. It's worked so well that I never gave any thought to upgrading. The other night, I noticed that Up To Date wasn't working, and that Firefox was acting strangely. I made the FC 13 installation disks, whereupon I found out that the system didn't have enough memory.
Rather than mess with the P3 450 any more, instead I swapped main boards and decided to do an upgrade. it even possible to do an "upgrade" from 3 to 13? Is it possible to maintain my existing partitions/settings. I've backed up everything that I'd be too unhappy to lose. It's a two drive system and the second is nothing but data, none of it catastrophic to lose, but at least disappointing. I'd like to keep the data and settings on the primary disk, but won't cry if I can't.
I am planning to install 10.4 when it arrives. And am not going to upgrade because i upgraded from 9.04 to 9.10 so now i need to refresh the system.But I have all my partitions except root using lvm2 logical volumes. My question is : What is the safest procedure to install 10.4 on an existing lvm2 without losing my files/partitions
I am completely new to Ubuntu/Linux and am having trouble getting my DVD-ROM drive to work. I've tested a few things, and it seems that if there is a CD in it when I boot, then it works fine, but if there is nothing in it then Ubuntu won't list the device. The DVD-ROM is master on a PATA cable and the CD-RW is slave (yes I know it's getting old now...) Drives worked fine under Windows XP. I don't know very much about the boot process, but the following from kern.log seemed relevant: Booting with a CD:
I have successfully installed 11.04 onto my existing Windows laptop as files contained in the windows system and have dual booting.I would like to copy this installation to a 5gig fast usb stick so that I can retain all my settings etc
External USB 3 drive not recognized after upgrade to Natty. Works fine and is recognized immediately when plugged into USB 2. Occasionally the drive is recognized with USB 3 when plugged/unplugged. Worked fine in Maverick (with USB 3)
i'm trying to install mint 8 on a new hard drive but my pc doesn't recognized it. neither does the live boot mint cd. when i get to create partition it just hangs there.do i need to format the new drive using my old one first?
I am trying to install this OS. However no matter what I do the UBUNTU instllation CD doesn't recognize the hard drive on which I would like to install the OS on.
I currently have two SATA hard drives connected to my computer. MY primary is my Windows 7 drive and my second hard drive is my spare.
When i load up UBUNTU and get to the window where I can select which hard drive/partition to install to my second spare drive isn't there.
I just bought a new HP desktop, and I want to install Debian on the hard drive. I ran the Windows program on the Debian CD to start the install.
I selected Manual drive setting, and resized the large C: partition to 50 GB. I want to install Debian in some of the free space, only their isn''t any free space! The 400+ GB I took out of the C: partition is labeled "unusable" instead of "free space."
If I double click the unusable space, I am just given the cylinder/head/sector numbers. How I can make that space usable?
I would boot my Gparted CD, but I don't know how to get to the BIOS. The boot screen goes right to Windows without showing me the key to get to the BIOS. I tried hitting DEL, but to no effect. Do you know what the HP computers use to interrupt the boot?
I would like to fix partition alignment on my SSD disk, and I am curious if it is possible to do it without handling data from disk and back. Is it possible with Gparted?Quote:
When I was installing Ubuntu onto my laptop, I probably did a mistake partitioning the hard drive by selecting align to: nothing, because I didn't want to have unallocated spaces between partitions. However, this resulted in partitions' misalignment as no one partition in the extended one (including the one that is extended) doesn't start on a physical sector boundary. As I already have much data on the HDD and I don't have another one that big, it is impossible for me to erase existing partitions and then copy the data back. So, is there please a way to get the partitions aligned properly without deleting them?
Here is output from fdisk -lu: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd58c6e9d
I have a 120GB HDD with a 22GB partition for Ubuntu and the rest for Windows XP. Windows finally died on me so I attempted a fresh install on its partition. However, the install threw a ton of errors so I used a LiveCD to re-install Grub and I booted into Ubuntu. I open up the disk utility to re-format the Windows partition so I can re-try re-installing Windows, but immediately I notice that the partitions are not right. If you add up all the partitions, they are about, say, 18 million terabytes over my HDD's 120GB capacity. Ahhh! What do I do?
I don't think anything is terribly altered, since I can still boot into Ubuntu, but I am completely confused and slightly worried that I might kill any chances to save my HDD I can't post a screenshot due to my post count, so the image loses some of its efficacy in making it small enough for an attachment. Here is the output of fdisk -l: Code: omitting empty partition (5)
I'm using Ubuntu 9.10 and previously had a separate partition with another distro on it. I decided to delete the other distro's home and swap partitions and install XP in place of it. I've been following these instructions: [URL] and [URL] I have gotten to the point where I am booting to the XP CD and want to install it, but I get the message, "Setup did not find any hard disks installed on your computer" when I should be getting to the screen that asks me to select a partition to install XP on. This is what my HDD looks like in GParted:
I want to install XP in the unallocated partition, but I have a feeling I screwed up somewhere along the way and probably don't fully understand the whole thing. Even if I try to format the unallocated partition to NTFS I can't make it a primary partition (I assume because it's within sda2). The very last thing I want to do is delete my Ubuntu partition and start from scratch, but if that's my last option let me know.
I want to install Linux Mint, but it cannot detect my existing partitions.I have a 500GB HDD, splitted in three partitions, on c: having a Win7 installed, and on d: and e: a lot of personal data.I tried to install Linux Mint, but the installer says there is no other OS installed and there is no any partition at all. I run the Linux Mint in live mode, Gparted says: "unallocated 465.76GiB". But when I go to Menu -> Computer then I can see each and every partition, I can mount them and browse them properly.I tried Ubuntu 10.04 and 10.10 with the same result as described above.
Currently, I have a dual boot set up with Ubuntu and PCLinuxOS. I have a separate / and /home partition for both (ext4). When I run the installer, it claims the whole disc is empty. I tried the expert option and loaded every module that seemed to have to do with partitioning, but that made no change. Is there some simple option I am missing that might help it recognize that there are existing partitions? This was the "testing" installer if that makes any difference.
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
As every time when a new OpenSuse Version arrives, I tried to install 11.4 (I have 11.2 ans 11.3 on separate partitions, + a Windows 7 that already was there when I bought my computer). Previous versions always recognized existing installations and added them to the Grub list, 11.4 doesen't... it merely recognizes the Windows. This is blocking me from testing it before adopting, as I always do, as I don't know how to add these entries manually; I'm too afraid not to be able to add the entries once installed, and not being able to use my older versions in case I have troubles. What went wrong in this release that developers forgot this important part? How I could manually add my entries for 11.2 and 11.3?
I have 2 image files, image 1 which is 16MB, has multiple partitions, where the boot partition has a 2.4 kernel in it, and image 2, which is 32MB, has a single partition with a 2.6 kernel.
I wish to add those extra partitions from image 1, into image 2, either by adding them within the 32MB(which means cutting back on the size of the existing partition), or adding them to the end of the image(which means extending the image beyond 32MB).
The boot partition for both images is ext2, while the rest of the partitions in image 1 is just raw data.
I'm working with these images in Mandriva Linux 2009.
How can I achieve what I want to do? I think it should be with fdisk and/or mkfs but I'm not sure how? I've tried using gparted to regenerate the partitions from a new image file with the following steps: dd if=/dev/zero of=image.img bs=32M count=1 gparted image.img
Then I created a 30M boot partition. However, I'm not able to create the rest of the partitions as they are smaller than 1MB, which seems to be the min supported. I need precise control of the start/ending sectors of each partition.
I've had many installation issues that I won't go into here, and have had to reinstall several times. All I'm trying to do is get an XP installation dual-booting with 9.10.
1. My hard drive partitions are:
120 GB NTFS (with boot flag) for Windows 40GB EXT4 for 9.10 (/) 8GB Swap The rest (around 220GB) EXT3 for /home
2. I install Windows, and during the windows partitioner it doesn't see the 3 other partitions on the drive, just the NTFS partition, which is odd. I install Windows on that partition, and confirm that I am able to do a cold boot into it.
3. I boot up a 9.10 CD, and all looks as it should. I install Ubuntu in the partitions as outlined above, and it doesn't have any issues.
4. I can now reboot into Ubuntu without issue. When booting into Windows, I get the startup screen with the blue "progress" ticker, which displays for about 2 seconds, then I get a BSOD. The message refers to making sure the hard drives are "partitioned and terminated correctly" and whatnot. If I didn't know any better (and I obviously don't), I'd accuse Ubuntu of bjorking my clean Windows install.
I'm working with an older PC that belongs to my parents. They've been using Ubuntu 8.04 with no problems, and with 10.4s release, I planned to upgrade them to the newest version. The system's specs are as follows: 1.5ghz Athlon XP CPU 1.5gb RAM (PC 2700) 20gb hdd (IDE)
I have tried both the Ubuntu 9.10 (two different discs) and a 10.4 install CD and both give me the same issue. The installation proceeds along swimmingly until partitioning comes up. The partition table simply shows no hard drives. I have heard of this issue occurring with SATA drives and motherboard settings, but what could make it happen to an old IDE drive? Any odd-ball motherboard settings or anything that might need to be changed? GParted and the Live disc (along with the currently installed version of Ubuntu) recognize drives and can navigate them. What gives?
On my system I have two internal SATA Disk drives, the first one is 120GB and the second one 360GB.
120GB Disk: 1st partition: NTFS (22GB), Windows XP is installed, for playing my games. 2nd partition: NTFS (62GB), The "GAMES" partition, where all the games are installed 3rd partition: EXT4 (25GB), Ubuntu Karmic 4th partition: SWAP space
The 320GB disk is a single NTFS partition, where all my data/files are stored. A couple of days ago I used GPARTED to shrink the 320GB partition and create a new 2GB FAT32 one at the end of it. (Never had any problem before using GPARTED for any filesystem). I put in there some old dos games and rebooted to windows. Then I formatted a diskette as MS-DOS startup disk. I rebooted the computer again and and booted from the FreeDOS LiveCD. After playing for a while I tried the MS-DOS disk, to see if it performed better.
Now Windows XP does not recognize the DATA and GAMES partitions, buts recognizes the fat32 one. In ubuntu they work, but when I try to fix them, it says "run chkdsk". Windows does not recognize them so I cannot do this. I tried to restore Windows XP from a Norton Ghost Backup image file, but its LiveCD does not recognize these partitions either (norton ghost 12 uses vista to boot the live cd).
I formatted with mkfs.nts a USB 500 GB external drive. Under Linux when I connect it to the USB port it's recognized and works. Under windowz 7 home is's seen in the device list but not in the computer window. I can't do anything with it apart eject it. This is what I get from fdisk:sudo fdisk /dev/sdcThe number of cylinders for this disk is set to 60801.There is nothing wrong with that, but this is larger than 1024,and could in certain setups cause problems with:1) software that runs at boot time (e.g., old versions of LILO)2) booting and partitioning software from other OSs(e.g., DOS FDISK, OS/2 FDISK)Command (m for help):
and this from fdisk -ls /dev/sdc: gt[~]$ sudo fdisk -ls /dev/sdc Disk /dev/sdc: 500.1 GB, 500107862016 bytes
I have been given Toshiba Tecra S11 with windows 7 running on it to install Ubuntu 10.04. Toshiba has a bunch of utilities running on the machine set up as dev/sda1, dev/sda, dev/sda3 and dev/sda4. I do not know where to start because of these existing partitions.
Its from a Synology Box with 3 disks, which one is damaged. But this disk wasnt in use.Take a look on the raid-size of 493 GB - and the both available disks with 250GB..) On the others there were a linear raid. during this damaged disk the synology-device tells me, that the volume was crashed.But it look like, that this disk was not mounted into this volume.Quote:
DiskStation> mdadm --detail /dev/md2 /dev/md2: Version : 00.90
I have used GParted several times but I only know how to clone a single partition. I am looking for a way to clone and entire drive that has several partitions, along withthe MRB, unpartitioned space and everything else in one step. I have a 500 GB drive that is going out and I want to clone it to a 1 TB drive so I don't have to reinstall 3 different OSs and fix the GRUB. One of the other OSs is on anther drive so I'm not sure that it would work even if I can clone everything exactly. I'm not sure if the drive that is failing is the one with the MBR on it or not. how to do this in GParted or know another good program I can run from a live CD to do this?
