Ubuntu Networking :: No Internet Connectivity - Cannot Access Pages In Apache
Nov 9, 2010
I can connect to anything locally, I can SSH in locally but nothing works from outside my network (can't access pages in apache, can SSH, etc.) I've checked the logs I can think of, but what should I be looking for? The last thing I did today was add a FW rule to log and drop from an IP, saved my iptables to a file in /etc. (this was at 10:45am). The last time I successfully logged in remotely 1:03pm. I connected multiple times in between. I've rebooted remotely once or twice. That's it. I've already flushed iptables.
View 1 Replies
ADVERTISEMENT
Jan 26, 2011
I'm trying to setup an Apache webserver on my computer in order to practice HTML5/CSS3 for an upcoming competition I'm in. I'm able to access my site from inside my network, but I cannot outside my network. I've had several people try, and they all report that the server just times out. I'm running Ubuntu 10.04 and Apache 2.2.17
My site is at [URL]
Here is the output of ifconfig
Code:
eth0 Link encap:Ethernet HWaddr 00:26:22:50:0f:0a
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code]....
View 4 Replies
View Related
Nov 22, 2010
Freshly installed Ubuntu 10.10 amd64 on Asus K50IN laptop refuses to show secure HTTPS internet pages, while posting this here is OKay. It says connection timed out. I tried several browsers FireFox Arora Epiphany.
View 2 Replies
View Related
Feb 19, 2010
I have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
View 2 Replies
View Related
Jan 23, 2011
I had my desktop running ubuntu 10.10 at my sisters house hooked up to a router sharing internet with her boyfriend never had a problem with it there. I moved into my own apartment this week plugged the cable modem directly into the broadcom ethernet card and couldn't get an ip or anything it wouldn't connect period so I ended up hooking it up usb which works but only at speeds of 5-7mbit when I have 15mbit connection. So I put another ethernet card in hoping it was just problem with the card and tried it that worked.
I got a connection but it was incredibly slow like getting maybe 5k a second so I open network tools in administration menu and start pinging google. While I'm waiting on a bandwidth test to complete and it takes off getting like 20mbit keeps that connection for a while then out of nowhere just drops to almost nothing. Again for a few minutes then falls off completely so I restart and it does the exact same thing starts off slow then something clicks and it works great for 5 min then nothing?
View 5 Replies
View Related
Apr 18, 2011
I have a server with two ethernet ports. I configured eth0 to be static, set at 10.1.10.148. I plugged in another router into the other ethernet port in order to configure that router. I configured eth1 to use dhcp. Using /etc/network/interfaces rather than gnome network manager. When I did this, I lost internet connectivity (internet routes through eth0 of course)
- Why did I lose internet connectivity?
In order to recover internet activity, I had to disconnect the new router on eth1 of course, and do sudo ifdown eth1. That wasn't enough however. After rebooting numerous times and pulling out my hair, I finally tried configuring eth0 as dhcp, rather than static, and this fixed the problem.
- Why didn't sudo ifdown eth1 solve the problem? What information was saved between reboots that somehow remembered that I plugged in the new router? Because my thinking was if /etc/network/interfaces was identical, and the network topology was identical, after a reboot everything should be restored, but it wasn't.
View 7 Replies
View Related
Apr 21, 2010
I have an iphone, I am trying to get internet connectivity to that phone through wifi. I dont have a wifi router. But i do have a laptop with wifi card. I am connecting to internet via cable modem. In win7 I used to create an accesspoint and do the ics from ethernet card to share via wifi card. It used to work perfectly.
Now as I am sing ubuntu, i want to do the same. I have intalled firestarter, and shared the internet connection through wifi card(wlan0).After this I created an accesspoint using the gnome network applet. Now i can connect my ifone to ths accesspoint. But there is no internet connectivity in my fone.
View 7 Replies
View Related
Mar 6, 2011
I was having trouble with some software detecting ports so i removed ufw and now have no internet
Ive tried and none of these work:
View 1 Replies
View Related
Jun 25, 2011
Wife's laptop has AR5001 Wireless Adapter laptop model is Toshiba Satellite A215
Problem : Wireless networking randomly loses connectivity and can not regain connectivity, the only apparent solution is a full power down , this is not even certain to work. The card works under Windows, she hates Windows. (I love her for this) I know it's not faulty hardware , because it will work for days on end under Windows without problems.
Things I've tried : madwifi drivers (any and all versions available) : These increase stability of the signal and seem to delay the inevitable however it still happens. When using these drivers the only option is to unload them modprobe -r then reboot then remove them again and re add them. It makes no sense why this works, and if I don't remove them prior to rebooting it will not work.
ATH5K drivers : These are pretty much junk, results are unpredictable at best, sometimes it will work perfectly for a few hours, sometimes it will not work at all. Nothing is repeatable, I can't seem to force whatever condition is causing this. rfkill does not show the wifi being blocked (hard or soft), unblocking it anyway does nothing, only way to make this work and it's iffy is to fully power down wait 5-10 minutes turn it back on and it MAY decide to work.
Firmware update : Updated the Toshiba BIOS to the latest version of the firmware 2.0 no joy here either. Same issue both sets of drivers.
Tried different distros and kernels : I've tried Mint 9, 10 ,11 ; Ubuntu 10.10, 10.04 , 9.10 and 11.04 (which is currently installed) , Fedora and OpenSUSE. All are giving the same problems. I have also tried a slew of different kernels no joy from any of them (I'm not at the computer with the issue now I will post exactly what kernel versions I've used when I have access to the machine).
Another useful bit of information, the hard switch to disable/enable wifi WILL disable it but turning it back on does absolutely nothing. The hotkey does nothing at all. The bios does not have an option to disable or enable the wireless card.
I will also post the typical lsmod , lspci , iwconfig all that good stuff when I get back to the computer in question. I'm probably just going to buy a PC card for it and give up on that one, but this is driving me insane and I would really like to see it resolved even if I do replace the hardware.
View 3 Replies
View Related
Apr 23, 2009
I've just installed Fedora 10 to basically work as a NAS for another machine - but also serve a couple of web pages. After having alot of issues with network manager (with it changing the subnet so nothing would work), I'm now almost there:
I have two network cards connected in the server:
1) eth0 connects to a switch that ultimately connects it to the net (on a 10.0.0.* network)
2) eth1 connects directly into another server for backups (192.168.0.* network).
Now when I setup eth0, I get network access can ping/ update/ surf the net - absolutely no problems, but when I connect eth1 in - the net dies and nothing works, I can ping devices on both the 10.0.* and 192.168.* networks, just nothing past the gateway. I presume this is either a route or DNS issue, but am unsure about where its falling foul - both the resolv.conf file looks fine as do the ifcfg-ethx scripts.
View 1 Replies
View Related
Feb 15, 2011
I can access dirac.org from inside my network; I can't access it from outside my home network. Apache is running on a Ubuntu box named "satan": 192.168.0.2 and I'm testing it from a MS Windows machine named "lucifer": 192.168.0.3. My ISP is optimum online, which does not filter port 80.
0. router
The router is a Netgear WNDR3700. All computers on my LAN receive their IP addresses via DHCP, but I've reserved all the IP addresses, so they are essentially static (satan is always 192.168.0.2, lucifer is always 192.168.0.3, etc). The router is set up to pass packets destined for port 80 to satan (192.168.0.2), which is where Apache runs.
1. tcpdump
Using tcpdump when accessing dirac.org from within the LAN (this is what works):
# tcpdump -i eth0 host ool-18bda2d2.dyn.optonline.net and tcp port 80
ool-18bda2d2.dyn.optonline.net.2826 > satan.www: Flags [S], seq 3934453911, win 65535, options [mss 1460,nop,nop,sackOK], length 0
[Code].....
View 2 Replies
View Related
Jun 20, 2011
I am new to UBUNTU. I installed the latest one alongside windows 7. I am having problem with the internet connectivity. I configured the static ip settings right I guess. Edited the Auto eth1 and assigned ipv4 settings manually and entered everything correctly.
Address 192.168.xx.xx
Netmask 255.255.255.0
Gateway 192.168.xx.xxx
DNS Server xxx.xxx.xx.x, xxx.xxx.xx.x
Do I have to put MAC Address as well? Which is addressed as 'Network address' in Windows where I put this MAC. I have on board Realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.20) Network adapter. Do I have to install the driver?
View 3 Replies
View Related
Mar 3, 2009
I'm new to Fedora 10 and still a newbie with Linux in general. I installed F10 on an old PC I had....and the install went well..however, I'm having Internet Connectivity issues.
Here is what I did so far:
Did an ifconfig command and I have the following:
pan0 Link encap: Ethernet HWaddr D2:30:36:AF:61:95
inet6 addr: fe80::d030:36ff:feaf:6195/64 Scope: Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes: 0 (0.0 b) Tx bytes: 8676 (8.4 KiB)
When I go to the Network Configuration Panel I see the following:
Status: Device: Nickname: Type:
Inactive pan0 pan0 Ethernet
Tried to activate and it states Activating network device pan0, please wait... determining IP information for pan0.... A few minutes pass by then. It indicates it failed. Cannot activate network device pan0! I have disabled the Controlled by NetworkManger and enabled the Activate device when computer starts.
View 14 Replies
View Related
Mar 12, 2009
On one of my F10 boxes yesterday, I installed several NM packages with yum update after being advised of their availability. Today, (the first reboot since installation) I no longer have network access on that box.
View 2 Replies
View Related
May 28, 2011
I just installed F15 on a laptop that previous had F12 working well. During install, it finds my wireless card and seems to set it up fine. The full install ran with the wireless active without any problem that I could see. Now, when I start up, I see Network Manager tells me that the wlan is active, but it doesn't show my specific network. If I click on the NM tray icon and open up the panel, my network is shown but it is not "active".
I can double click on it and it will become active - shows the little globe next to the antenna. This works fine for about 2 web pages worth and then FireFox 4 stops being able to find web pages. If I go back to the panel, double click on my wireless network (which looks like it is active already), and reactivate it, I can get the page I was looking for in FireFox, but within a couple of minutes it will stop.
Likewise with yum, while I'm installing software, I'll occasionally get errors like this:
[URL]: [Errno 14] curl#6 - "Couldn't resolve host"
If I reactivate my wireless network in the NM panel, it continues fine. Other computers/phones connected to this network seem to work fine. Is NM known to be problematic in F15?
View 14 Replies
View Related
Oct 20, 2010
I just installed a fresh copy of Ubuntu 10.10 on a HP DV2500 laptop. Everything installed as expected but I am having some wireless issues I was hoping somebody could assist me with. I am able to connect to my network via wireless with no issues. However, when I attempt to browse the internet it will not connect to any pages. Obviously when I connect it via CAT 5 all works as expected. Any ideas on how to solve my wireless issues?
View 1 Replies
View Related
Jul 19, 2010
I'm running a squid proxy in my ubuntu server, and I must have mess it up with the squid configuration. Users, cannot, access https pages. Can you tell me what to change in my squid.conf, so, to fix this?
Here is my squid.conf (witch is a friends conf, that i have change for my needs...)
Code:
http_port 8888
#http_port 3128
icp_port 3130
acl QUERY urlpath_regex cgi-bin ?
code....
View 2 Replies
View Related
Dec 13, 2010
This started yesterday. I haven't made any recent changes. I can't access any pages beginning with https. It's just my computer because my girlfriend's laptop doesn't have any issues. I'm using OpenDNS, but I have been for a long time and this is the first time this has ever happened. I'm not using a router, I connect straight to the modem, which I've already reset.
View 1 Replies
View Related
Apr 21, 2009
We have Apache installed on CentOS 5.3 in our laboratory. Indeed the server is running fine for almost two years since it is actually the first CentOS 5 that was released just regularly updated. Now, most of our applications are custom made PHP applications and until now we somehow managed to avoid using PHP to fetch files that are on the internet itself. But now we are desperate because we need to allow PHP to fetch files through Apache but it seems as if Apache is not allowed to make a connection to the outer world. Additionally we use a proxy server to connect to the outer world so right at the beginning http_proxy is used to set that environmental variable. And for the root user it all works fine after that but it seems as if the apache user is not allowed to access the internet. Just to make a remark our web server can be accessed from the outer world so its a one way street for now.
View 1 Replies
View Related
Jan 25, 2010
Up until yesterday I was able to access these devices through the web interfaces that they use. I'm running Ubuntu Karmic 9.10 I have 3 PCs running on my network, and 2 NAS devices: Ubuntu (main computer, also has an XP partition)) - static IP 192.168.1.30 Ubuntu netbook - DHCP IP Windows XP (HTPC) - static 192.168.1.50 Linksys NSLU2 (was running Debian, problem arose when trying different configuration, now back to stock firmware) - static IP 192.168.1.100 Dlink DSM-G600 - static IP 192.168.1.120
I used to be able to able access these just fine using my main Ubuntu setup. Now, it will no longer display the pages. Internet access is fine, i can even access my DSL/Router device's internal config page. The netbook and the Windows HTPC can both log into these devices, as well as the XP partition of the Ubuntu system. I have tried using a VM of XP within Ubuntu, bridging the network device, i have the same symptoms - internet is fine, cannot access local network web-logins.
Access to fileshares among all machines remains unchanged. another odd behavior is that i can SSH into the NSLU2 device from all the machines, but i get odd things from this computer - it will let me log in, asks for a username and pass, but if i run anything like mc or htop, it just blanks the terminal in an odd way. from other computers the login and display are fine.
[Code]...
View 3 Replies
View Related
Nov 19, 2010
HTTPS doesn't work. Im running firefox in ubuntu 10.10.
View 1 Replies
View Related
Dec 31, 2010
I managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
View 3 Replies
View Related
Jul 6, 2011
I connected my laptop running with Ubuntu 11 in the LAN but I couldn't access internet.But I could ping to the other computers connected in the LAN. I tried the same thing with windows 7 in the same laptop and I could access internet.
View 1 Replies
View Related
Mar 18, 2010
I have set up a hostname on dyndns.com and configured my router to forward port 8181, but I cannot view it from the internet (FF says "can't establish a connection to the server"). The DNS is ok, is just the apache webserver that doesn't work.
I can acces my webserver from
http://localhost:8181 (loopback)
http://192.168.1.1:8181 (in the LAN)
BUT NOT <hostname>.dyndns.com
Here is my site configuration
[Code]...
So, what's the matter? How can I reach my apache from the internet? Also, I read about routers loopback errors, but this seems not related to it, since I tried to get it through a proxy server, and it failed
View 1 Replies
View Related
Dec 13, 2010
Im using fedora 8 and have installed php5 ,and mysql and i see only php blank pages ,some idea? must be php.ini, but i am newbie installing php and apache, i disabled selinux, and grant all the permisssions to excecute..
View 3 Replies
View Related
Jan 13, 2010
I have a Cent OS 5.4 32 bit final installed in my dedicated server. I used to run lighttpd with php in my server until now and all was fine. But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command. Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages. Instead it downloads php files like index.php when i open in browser. So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
View 2 Replies
View Related
Jul 16, 2010
I own several websites and have always developed on my local Apache server.
I am in the middle of releasing a new product on one of my sites and have been making rapid changes to the site based on feedback from customers, etc. as my product has gone live...
My local server is NOT refreshing pages. I make a change, click "refresh" in my browser and nothing happens.
I have tried clearing my browser cache and it makes no difference. Eventually (several minutes later) my changes happen.
Problem is, I need to be making these changes rapidly, and I really prefer to check my work on localhost before uploading it to a live server where I'm getting a lot of visitors right now.
This is a very recent problem as I have never had this occur before. Running 10.04.
View 9 Replies
View Related
Apr 11, 2011
I have Joomla installed at /var/www/joomla, if I navigate to http://localhost/joomla, I get a 404 error, but if I add index.php, the page loads. What is wrong?? Also I am not able to navigate to the administration part of Joomla for the same reason, typing in index.php doesn't load it in this case. Yes I have verified that all files are present in the directory.
View 7 Replies
View Related
Jul 20, 2011
I am using both win 7 and ubuntu using grub. If I connect to internet in ubuntu its working fine
but if I connect to net using win 7 internet is not working. However if I connect internet in ubuntu and restart win 7 without switching off router I can access net in win7 even if I switch off router and start again its working fine. But when I shut down system and router and switch on in win7 its not connection.
View 1 Replies
View Related
Mar 20, 2010
I have apache running on my server, and also Zoneminder, a surveillance system running on the same machine. Both services runs without glitches, and I think apache's config as well as ZM's config are fine. I am not sure I understand how apache (not to mention the whole thing zoneminder, apache, web browser...) works. Pretty hard to manage when you dont know what you are doing. Also, when I try the supposed to work zoneminder webpage in my web browser, I get nothing (a blank page), or sometimes a "Not found" error message. The latest seems to be from apache because it is the same font as the "It works!" message when I try http://localhost:80
The only bit of information I have so far is in the apache error log (/var/log/httpd/error_log) and it says:
Code:
[Sun Mar 21 00:35:14 2010] [error] [client 192.168.0.100] script '/srv/httpd/htdocs/zm.php' not found or unable to stat
[Sun Mar 21 00:46:04 2010] [error] [client 127.0.0.1] File does not exist: /srv/httpd/htdocs/zm
It seems that the "zm.php" is missing.... That would be why Apache cant find the page?
View 14 Replies
View Related
