Ubuntu Servers :: Loading Internet Pages ?
Jun 18, 2010Some pages on the Internet will not load. What is the remedy?
View 1 RepliesSome pages on the Internet will not load. What is the remedy?
View 1 RepliesI recently bought my laptop (Fujitsu nh540) and installed FC14 on it. I have Integrated WLAN Atheros HB97 (IEEE 802.11b/g/n) (more info here about the config) running on: 2.6.35.13-91.fc14.i686.PAE
Since I installed FC I've had problems with the internet. In any browser pages load very slow, it looks like the browser waits some seconds, sometimes even 1-2 minutes until it actually starts to load the page.
Second thing I saw is that when it boots I keep getting:
Determining IP information for eth0... failed; no link present. Check cable? [FAILED]
But I have WiFi internet. I am not using a wired internet connection.
I installed madwifi driver (compiled it, after reading some info on google and it seems it should be good for my network) and it seems it's a bit better, but I still have to wait some seconds until it starts loading pages. I tried different browsers, it makes no difference. On my other 2 laptops I have no problems, the internet works fine, same goes for my android mobile phone. Another "nice" problem I noticed is that when compiz is enabled I see incoming video on skype black and the same black screen for some movies with some programs. After disablig compiz, all works for video.
after wrestling with several problems over the past few days of switching over to a portable version of Linux 9.10 (I'm running a Live USB created using Lili USB), and deciding between the UNR or the Desktop i386 releases (I eventually went with UNR because i386 will not load on my netbook and ends up corrupting itself), I now find myself with the interesting problem that Firefox will no longer load webpages.I'm using a wireless connection, and it worked about 4 hours ago, but doesn't any longer. It registers that it is connected (The network icon displays the connected information), but the webpages themselves will not load (And I don't know if any other web based application functions- I only bothered to check firefox).
And I know the connection itself is not to blame because I'm using it right now to post this message (Off of Windows 7).Any help that can be given would be appreciated. Except for these problems that come up I'm loving Ubuntu, and intend to use it inbetween classes and such.EDIT:No internet applications work, and the router does assign me an IP address while in Ubuntu. Also, the speed of the "Server not found" message indicates that it's not even trying to connect.
I just installed Ubuntu 9.10 in a dual boot Vista system (DELL INSPIRON 530). Everything was ok except the wireless network configuration. Afrer checking on the Internet I realized There was an issue with my network card (Broadcom BCM431. I first tried to install the drivers using Ndiswrapper with not succes. Finally, I was able to use the b43 driver by installing b43-fwcutter. Now the driver is shown and active in the Hardware Drivers Utilily. I am even connected to my Wireless Network. However, I cant load any website. I have checked the parameters in the network set up. I have even tried different options, like static or dinamic IP. But I cant load any website.
View 2 Replies View RelatedI am Using Ubuntu 10.04 fresh install connected to internet via VPN Network.Internet works fine i can dowload mail and send. But for some reason i cant load some webpages like Facebook, Adobe and etc.I install all the newest programs Java, Flash anything.I'm runnung Firefox 3.6.9.I tried everything disabled IPV6, Proxy. But nothing solved it
View 5 Replies View RelatedApparently when cachecdn.websitename.com tries to load it either freezes,crashes or missing components like the chat bar in a chat room is missing from the web page.How to fix?
View 2 Replies View RelatedTwo very simmilar laptops connected to the same WiFi router loading the same web pages. Firefox on Windows does that for 3 secons, while Firefox on Ubuntu needs 1-3 minutes to load the same page. What could be the reason for this? Any idea how to fix it? The laptop with Ubuntu runs 10.04 LTS (lucid), Firefox is 3.6.10 and on any other WiFi network it loads the web pages really faster but why is much slower than Windows now?When testing the speed on URL...Ubuntu loads times faster than Windows. The WiFi router has been reseted. Firefox has been started in -safe-mode, both didn't help.
View 4 Replies View Relatedbrowsers consistently hanging and not fully loading web pages. this happens in all the browsers i have tried. Opera and Chromium and Firefox. This only happens in Ubuntu. All the other computer in this house load fine and this windows side of this computer loads the pages the right way. At this point i don't know what to do but keep hitting stop and reload and few time till the page loads. can anyone help with this? Also I have tried to clear the cashes. One question where do the temporary Internet files go so I can manually clean that folder out. And also Firefox isn't to bad and the other browsers I just don't like it that much as I like the opera.
View 2 Replies View RelatedI'm having trouble with Firefox hanging. It takes at least two attempts to launch, having to force the initial blank page to quit. Often it will freeze my desktop when loading new pages, and I have to force quit. I've upgraded to 3.6.17 but no difference. The Mozilla help page suggests disabling add-ons to find the problem, but to no avail. Chrome works OK but I'd rather use Firefox.
View 6 Replies View RelatedThe same network environment, no matter which browser I use, my fedora 13 always works slower than windows XP on loading web pages. Others are better than windows -- like memory management...(I directly feel that). applications running more smoothly than those in windows xp.
I want to know how could I make it faster on loading web pages.
Note: my network environment can not be changed!
I am currently using Open SuSE 11.3 and connect to the internet through a fixed wireless terminal (CDMA Wireless modem), Huawei ETS-1201 with BSNL connection. The problem is that, after dialling and connecting to the internet, some pages dont load randomly. Sometimes, Google loads quite fine, but other times, it is just stuck and I have to reload the page several times. When I connect through Windows, I have no such problem. I have used Fedora, Ubuntu and Sabayon but the same problem exists. I don't want to return to Windows but is frustrated with my web experience on linux.
View 2 Replies View RelatedI am trying to set up my Apache server with FastCGI as the CGI engine. It will be mostly running PHP, but I may add Perl or something else later. I started from a completely fresh install of Ubuntu 11.04 with every update available. I used the install CD to install a LAMP server as part of the system install.I am using the tutorial at URL...to add the FastCGI functionality. I am having some problems with getting everything to work.The first problem was that apache2-suexec-custom wouldn't accept a different document root. I fixed that by compiling apache2-suexec from source with the document root changed to the correct path.
The next problem is that every php page I load throws a 500 error. Apache's error logs show that FastCGI isn't returning the page data correctly to Apache.
I have been investigating some security precautions over the past several months. I use Ubuntu now instead of windows and FIrefox browser also. I have installed BetterPrivacy, WOT, NoSCript and a few other add ons. I have SELinux, ClamAV, AIDE, and chkrootkit installed for Ubuntu.
When we browse certain web sites, we get an error about the server being reset. However, when I put the Ubuntu install cd in and browse with Firefox, obviously with no add ons or settings changed, we can browse to the site with no problems. We are trying to be secure on the internet and I don't want to lower or get rid of any of the settings / add ons we added. What would cause servers to reset when using Firefox / Ubuntu with browser add ons / OS addons?
I installed Drupal and there is only one site. It I access the website [url] where Drupal is installed I can easily see it functioning properly. But on internet it is not loading properly the colors etc are not visible properly.
Following changes were made to all the sites
Code:
I'm running Suse 11.1 KDE 3.5. My wireless is working absolutely slow. Pages aren't loading fast and I timeout when trying to do online updates. Here's some information:
Device: PRO/Wireless 3945 ABG [Golan] Network Connection
Kernel Driver: iwl3945
All my firmware seems to be in order.
/usr/sbin/iwlist scan
lo Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
wlan0 Scan completed : .....
ping -c 5 Google
Google ping statistics
5 packets transmitted, 5 received, 0% packet loss, time 4027ms
I' have FC10,firefox3.0.4it take ages to load any page.the d/l speed is good .but while loading pages it takes a lot of time!while on XP everything works fine even though the the firefox version being an earlier one than FC10
View 4 Replies View RelatedFreshly installed Ubuntu 10.10 amd64 on Asus K50IN laptop refuses to show secure HTTPS internet pages, while posting this here is OKay. It says connection timed out. I tried several browsers FireFox Arora Epiphany.
View 2 Replies View RelatedI just installed a fresh copy of Ubuntu 10.10 on a HP DV2500 laptop. Everything installed as expected but I am having some wireless issues I was hoping somebody could assist me with. I am able to connect to my network via wireless with no issues. However, when I attempt to browse the internet it will not connect to any pages. Obviously when I connect it via CAT 5 all works as expected. Any ideas on how to solve my wireless issues?
View 1 Replies View RelatedI can connect to anything locally, I can SSH in locally but nothing works from outside my network (can't access pages in apache, can SSH, etc.) I've checked the logs I can think of, but what should I be looking for? The last thing I did today was add a FW rule to log and drop from an IP, saved my iptables to a file in /etc. (this was at 10:45am). The last time I successfully logged in remotely 1:03pm. I connected multiple times in between. I've rebooted remotely once or twice. That's it. I've already flushed iptables.
View 1 Replies View RelatedI am able to print from Open Office just fine, but if I attempt to print a PDF or if I attempt to print directly from the internet, I get nothing!So instead I have to open the openoffice and copy the internet stuff to a page in there so it will print.Do any of you have an idea of what can be the cause.I am a linux noobie, so I may be the problem, however it is frustrating putting PDF's on flash drive and getting my son to bring his windoze laptop in so that I can print my PDF.
View 2 Replies View RelatedI have linux firefox installed on my notebook, and after having a bit of a problem with it, I did a full factory reset back to all the original settings. Now when I connect to the internet, some of the pages now are not displayed properly. For instance, when visiting E-bay, the listings look fine, but my E-bay page is all listed down the page, (if that makes sense) and I cannot look at any of the photos. MSN is also, how can I put this, spread out across the page. I have done a live update to see if that makes a difference, but no joy.
View 9 Replies View RelatedI would often like to print out information from a page on a website. I don't want all the rest of it - the pages before and after.
The trouble is that the websites page numbering, when it is available, doesn't often conform to my printer and the size of the page on the screen. So I guess at,say,page 6 and get something like page 3 if I printed it all out.
I'm trying to configure Apache2 with mod_fcgid and PHP5.
I wrote the wrapper scripts according to the following how-to: [url]
However, I'm stuck with my browser trying to download the PHP pages when I go to my website.
I want that squid error pages have the company logo. I edited the page called ERR_ACCESS_DENIED but the image doesn't show (image its in the same directory as ERR_ACCESS_DENIED).
I tried png and gif formats to no avail.
Also I found this but I don't get what the writer is saying so I cant do it.
http://www.creative.net.au/evil/squi...ge_pages.shtml
I own several websites and have always developed on my local Apache server.
I am in the middle of releasing a new product on one of my sites and have been making rapid changes to the site based on feedback from customers, etc. as my product has gone live...
My local server is NOT refreshing pages. I make a change, click "refresh" in my browser and nothing happens.
I have tried clearing my browser cache and it makes no difference. Eventually (several minutes later) my changes happen.
Problem is, I need to be making these changes rapidly, and I really prefer to check my work on localhost before uploading it to a live server where I'm getting a lot of visitors right now.
This is a very recent problem as I have never had this occur before. Running 10.04.
I installed apache and all is well until I had to add pages to /var/www/httpd and permissions are dinied.
View 1 Replies View RelatedI successfully installed cups on my fedorabox, I can manage it through the web interface on port 631. I added the hplip and installed a HP Deskjet printer. However, when I want to print a test page I get the following error: "no pages found". The print job is in a stopped state...
View 2 Replies View RelatedI am running OpenVZ.I wanted to use the VPSs IP at a particular port to load the Servers Web Pages e.g. The IP 88.88.88.88 is the VPS IP and 77.77.77.77 is the servers main ip.My files are on the main server at /usr/local/pages/
I want to load the page from the URL: https://88.88.88.88:8888
These should load the files from the main server at /usr/local/pages/ Virtuozzo a OpenVZ panel does it. So how is this going to be possible ? Will DNAT do the trick : iptables -t nat -A PREROUTING -p tcp -d 88.88.88.88 --dport 8888 -i eth0 -j DNAT --to-destination 192.168.0.1:8888
I have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies View Related