While playing videos on Linux (both Mint and Fedora) I noticed that the video will often pause for about 10 seconds or so while the audio keeps playing. After the 10 second freeze the video resumes where it should be. I've had this problem both on Mint 9 and Fedora 13 and 14.
View 3 RepliesI've got a problem with my VLC MediaPlayer (v1.0.3-GoldenEye). During video-playback, my screenbrightness is turned to zero after approx- 30 seconds of playback. After turning the screen brightness to high again, the same thing starts over again. By now, I encountered that changing screen resolutions (e.g. after closing a fullscreen application with a different resolution) also turns my brightness to 0.
View 1 Replies View RelatedI'm using a MacBook 2.1 with Lucid.
After i hit Enter in GRUB, there is a message on top of the screen saying "booting up", and it stays there for 20 to 30 seconds. Then everything proceeds normally. I think i caught a message saying that something couldn't be found, but it flashed too rapidly.
Here is an extract of my dmesg. I'm assuming the part between [] is timestamps, and it takes about 40 seconds to go from GRUB to the Login screen, so it fits. Nothing is happening during 32 seconds.
Code:
[ 2.690053] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 2.894315] usb 5-1: configuration #1 chosen from 1 choice
[ 35.053835] udev: starting version 151
[ 35.059728] Adding 1999992k swap on /dev/sda3. Priority:-1 extents:1 across:1999992k
[Code]....
I have just installed Ubuntu for the first time, and I installed sucessfully World of Warcraft, but I'm noticing some networking issues where my whole network connection seems to pause for about 5-10 seconds at a time, which I finally realized when I played WoW. So i was curious where the settings are that I can change to possible eliminate that, or what others have done to increase their network throughput on their cards.
I'm running Unbuntu 9.10 64bit with the latest version of Wine from the Synaptic Package Manager. The router is a LinksysWRT54G3G-ST and my wireless network card I think is something made from MSI I don't see where to find out what drivers are installed on it I'm probably just looking in the wrong place or I'd give more information on the card.
On almost each mp3 file I try to play, VLC will "lag" during the first seconds. There may be some screeching noise. It looks like vlc can't keep up with the bitrate, and it "skips" some bits.
This doesn't happen with totem (the default media player).
When I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
video playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI see [URL]
- Video resolution seems to change during video playback
- Channels cannot be found via DVB-S [URL]
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
Whenever I playback any video material using e.g. VLC, the screen resolution changes. This also applies when playback the video in a window and not fullscreen. The problem is that whenever the screen resolution changes, short time later the TV set blanks screen and show the TV set specific information "unsupported video mode".
How can I enforce to stay in the configured video mode?
When I play a video in Totem, MPlayer, VLC or whatever, my displayed windows will look transparent in a funny way. Letters are not readable, colours get distorted and images with a black background (colour 0) will display the partial video in it.
View 1 Replies View RelatedWhen i got to a site such as You Tube of South Park Studios the vidio playes fine but the pause, play , fullscreen ect... Buttons dont work unless it click on them multiple times!
View 3 Replies View RelatedIt should never be this hard. no way to get a video playback. at least msn comes with a complete workable system.
View 7 Replies View RelatedI recently installed Fedora 13 in my laptop, installed the audio codecs(mp3..and etc) and worked just like a dream. But every time I try to play a mpeg, avi, mov file in a player (vlc, xine, mplayer) I get no video, just a black screen. But I get the audio from the video.
View 9 Replies View RelatedI have a weird HD video in wmv and mkf files playback problem. Every HD video i attempt to play using vlc with vaapi hardware acceleration looks like this: My hardware configuration is i3 cpu, and i am using it's integrated HD2000 video card, which has DVI, HDMI and VGA outputs, which all i am using (not at the same time). However, the problem is present in every combination (DVI only. DVI+HDMI. DVI+VGA. DVI+HDMI+VGA).
As for software, I am using stock 32bit Slackware 13.37, with stock 2.37.6 kernel. And for HD video playback I have installed VLC-1.1.10. libva-0.32.0 and MPlayer-20110624 all these packages came from Alien pastures, so they are quality packages And my vlc settings are also stock :/
[Code]...
Movie and translation are 32 seconds out of sync. There are 2 ways to resolve:
1. edit all zillion lines of translation (daunting, I couldnt find tool)
2. add 32 seconds of nothing or whatever to the beginning of a video file
No2 may be quicker, but I do not know how.. I am not good with ffmpeg... also, if I want to join some 32 seconds, lets say of my XVid recording, I need to prepare it to be the same as film, so it is also complicated. how to add 32 sec? I tried openShot (couldnt find option). Cinellera is giving me strange errors, about audio codec and something I dont understand... I am confused in using both tools
Everyone always told me Ubuntu is a perdy Speedy OS. Im thinking otherwise so far, unless Im missing something. Basic problem where i see the lack of speed compaired to when this same machine is running windows 7 comes to web browsing. Mainly ..... vids. i downloaded Flash from the software center and downloaded java with the help of some commands i looked up. I cant watch more than about 8 seconds of video before it buffers. This common?
View 9 Replies View RelatedI've been running F12 x86_64 for almost a week now without significant issues, until now. I found this annoying problem with the audio system during video playback (both with VLC and with Kaffeine).It happens after a while playing a video: sound just stops (video continues). I found that sound is not dead though (can open Rhythmbox and music sounds).I discovered some system messages in /var/log/messages regarding this (attached).What could be happening
View 1 Replies View RelatedI previously posted about noob attempts with Google Earth Problems with Google Earth - openSUSE Forums and discovered my setup 3Ghz Intel p4 i386 with RADEON X300(PCIE) and RADEON X300SE as shown in YaST Hardware Information may not be compatible with linux/opensuse. I've attempted some of the suggestions and either I've had difficulties following instructions (noob alert!) or the solution didn't work for another reason. any offers on improving online playback, in particular; should I get a new graphics card, what would be my best option with limited funds (<50) when I want to be able to watch streams online smoothly but not play games/edit video. Efficient rather than powerful?
View 8 Replies View RelatedI've been hunting around for some screen capture software in Ubuntu, for future screencasts and out of the handful I've tried I've gone with gtk-recordmydesktop. After initial problems with recording quality, I have managed to get everything working but have noticed that on playback of any captured video, is played back at a crazy speed, the frame rate is not the issue as it is on the default 15 FPS setting but still the play back is very fast.
I noticed before my tweaking that playback was normal speed, but the quality was garbage, and I found that this was because of Compiz being enabled, and I have to run gtk-recordmydesktop with "Encode on the fly" and "Full shots at every frame" enabled in order for the video playback to not be all cut up, however ever since encoding on the fly has been enabled, this has caused playback to be hilariously fast.
I'm running Ubuntu 10.04 with Compiz enabled. With an nVidia GPU (8200 M)
I have installed Ubuntu 10.4 in my PC , my PC comes with NVIDIA, GeForce 9400 GT. Now every thing is okay except my video, colors come wrong, SMplayer, VLC, ... etc.
View 3 Replies View RelatedI'm sorry if this was asked before (i know it was but never worked for me) 2 days ago I installed ubuntu 10.10, my very first linux OS and I immediately fell in love with it.The only problem now, is tearing during video playback (I'm a perfectionist with a thing for fine details, so this is literally killing me)
I have nVidia 9200M GS (HP laptop)
I've set nVidia setting to sync vblank and disabled it in compiz
I've also disabled PowerMizer..
I love the system to give up some vsync issues in moving windows, but i just can't get over video tearing. I'm ready to install anything, change anything, even do a new clean install to get it working. UPDATE: Installed SMPlayer, works fine but drops couple of frames every 5 secs or so (more annoying than tearing lol) is there any specific settings that can fix that?
Both MP4 and OGV playback completely weird on my Ubuntu 10.04.2 laptop:
The resolution/length/etc is correct, but the picture is all weird. Webm doesn't work at all.
I tried mplayer, kmplayer, smplayer, gxine, totem and kplayer. All the same.
However, the exact same video's play back normally in HTML5 pages with a bunch of browsers on the same machine. They also play back normally on a Windows machine. There is no DRM involved.
Aren't these gstreamer en mplayer based players supposed to handle this correctly?
This is an Intel Core i3 machine with Intel HD graphics.
i am loving the ubuntu 10.10 interface.my laptop is a toshiba satellite l450 (3gb ram + 2.10ghz amd proc essor. i use a ati radeon hd 3200 graphics card.i have to manually adjust the sound settings if i plug in a headphone or a hdmi cable to suit the necessary output. windows did this automatically.my video quality is very very poor. if i run videos on any browser or watch a movie (avi file) on totem or vlc it is very jumpy and the sound is often out of sync.
View 1 Replies View RelatedNo sound on my Fedora when I play stuff on my hard disk. Video plays but there would be no sound. But there is sound/audio when I start using a browser. So I guess flash is working. Any basic trouble shooting stuff for audio? I tried this [URL] but the stuff is way over my head.
View 5 Replies View RelatedIm confused about buying nVidia 9800 GT or ATI HD 4770, In the 1st place I am going to buy this card to play HD videos 720p & 1080i and in the 2nd place to play games.I was using nVidia 6200 LE which doesnt support VDPAU, So nVidia use VDPAU in the newer cards to play movies, my question is:* Does ATI have something like VDPAU that have the same video playback performance ?
View 1 Replies View RelatedHave NO video camera. Trying to receive SKYPE video using Fedora 11 & SKYPE Beta Version 2.1.0.81 [latest version].When I receive a video call the image appears and then freezes and dumps the call after about six seconds.I have tried the 'env LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so /usr/bin/skype' launch, but it makes no difference in the bug.I have NOT heard that a camera is required to receive video.Is there a fix for this?nal information: Here is the error message I get when the call dumps and crashes SKYPE.
[thsk@galley ~]$ env LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so /usr/bin/skype
shm_open() failed: No such file or directory
Assertion 'b' failed at pulsecore/memblock.c:439, function pa_memblock_acquire(). Aborting.
[code]....
My problem is this: the video that I receive during a video call will freeze after about 30 to 60 seconds. Before that, it works fine. And the outgoing video (that which I send to the contact on the other end of the call) is fine throughout.
If my contact resets their video by turning it off and then on again during the call, it will usually work again for a few seconds. Then, as always, it freezes.
So, I am clearly receiving the signal. But maybe I am overloading something? Is this a graphics card problem?
SPECS:
* Mobile Intel 915GM Express card
* IBM Lenovo X41 laptop
* Intel Centrino processor
* Ubuntu 9.10 (Karmic)
* Skype 2.1.0.47(Beta)
i use Totem movie player every time i play any video it's forwarding a few seconds it self.
View 3 Replies View RelatedWhen I play videos in VLC, the video output seems to randomly freeze while playing the video. This does not effect the audio though. The audio output continues, but with the video frozen on a frame. This is happening in windowed and full-screen mode. I have to use "pkill vlc" each time twice then start VLC again. I have had to resort to mplayer for the time being. I am running squeeze. I was not experiencing this problem before though (started within the past week), so it must be due to some recent upgrade. I have tried "aptitude purge vlc && aptitude install vlc", but I am still experiencing the same problem.
View 1 Replies View RelatedI'm in trouble with playbacks (video and audio, desktop apps and live streams on Firefox). They are all running at least at double speed.
[URL]
Running Fedora 13 - 64 bits - cpu AMD Phenom II X2 955 (dual core) flat, no overclocking, no hacking of any kind. I've tried a re-install of all media codecs and plugins. The problem persists since fresh install of Fedora.
i use totem and vlc player for video playback, i had enabled the option in both player to prevent screensaver during video playback.yet screensaver is played during a video playback how to fix this bug in fedora 15.
View 5 Replies View Related