Fedora :: Sound Stops During Video Playback F12?
Jan 15, 2010
I've been running F12 x86_64 for almost a week now without significant issues, until now. I found this annoying problem with the audio system during video playback (both with VLC and with Kaffeine).It happens after a while playing a video: sound just stops (video continues). I found that sound is not dead though (can open Rhythmbox and music sounds).I discovered some system messages in /var/log/messages regarding this (attached).What could be happening
View 1 Replies
ADVERTISEMENT
Dec 12, 2010
No sound on my Fedora when I play stuff on my hard disk. Video plays but there would be no sound. But there is sound/audio when I start using a browser. So I guess flash is working. Any basic trouble shooting stuff for audio? I tried this [URL] but the stuff is way over my head.
View 5 Replies
View Related
Aug 30, 2009
I have had some issues since installing Fedora 11 on my desktop (well not after I installed it, once I installed the updates). Anyway sound was cutting out, videos were jumping, speeding up with no sound etc online such as ....., when playing local songs and videos etc. Anyway I followed this guide [URL] and that fixed my playing of online videos, music and when I play local music in totem etc. IN fact there is no issues with sound in those.
However; when I try to play a local video in any medial player it jumps sound, crashes, if it starts playing sound it will cut out and if I move the video forward it cuts out and sometimes crashes the video player. Any ideas why that guide fixed all online video and local MP3 but is till messed up playing local videos?
View 2 Replies
View Related
May 16, 2010
ok i upgraded to 10.04 lucid and now if i want to stream audio i get jerky audio with screen flickers and video streaming or not causes a complete lockup of the application. this all worked fine with 9.10.
View 9 Replies
View Related
May 17, 2010
So I recently upgraded from 9.04 to 9.10 and then to 10.04, and I love it!
But there's only one key problem -- sound playback.
When I'm playing an mp3 file in rhythmbox, or any other player, it'll skip when I maximize or minimize windows, or do anything that really uses resources.
And on top of that, if I just let it keep going, it'll eventually just stop playing the song, and the progress bar will jump forward and do the same for other songs, not even playing them.
even songs on pandora.com skip, but don't stop playing
I've deduced that it's probably a sound driver thing. I've downloaded the driver for my card, but I the directions tell me to install it in
/usr/src/linux/driver/sound
View 3 Replies
View Related
Oct 17, 2010
When I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
View 1 Replies
View Related
Jun 8, 2010
I set up Ubuntu on an old iBook G4, planning to use it as a front end to my main box. Installed 10.04 no problem, and from there, used Software Center to install MythTV Front end. Have done the same thing on a netbook, no problem.
However, on this PPC Mac, the front end works fine, navigation, menus, etc, until I try to play a recorded programme - the screen is blank, and I just get white noise from the speakers.
(BTW am trying Ubuntu as I don't have a Mac OS new enough to get any of the current Mac MythFrontEnd builds working)
View 2 Replies
View Related
Feb 12, 2010
i'm using ubuntu since 8.04, and the current (9.10) is a fresh install on new hdd.the problem was the same each version (8.04, 8.10, 9.04, 9.10) - while i'm playing the video (no matter if i use mplayer [smplayer], gstreamer [totem] or adobe flash plugin [videos]) the playback freezes randomly for about 5-10 sec. during the freeze the movie is still played, i can hear the sound is ok. if i press [space] in smplayer it pauses the playback, so the responses for keyboard actions are ok. not for the mouse clicks however. i can still move the cursor around the screen but it seems the system is not aware of it (clicking on the "pause" button doesnt pause the movie). except the cursor, nothing changes on the screen (if the im [pidgin] window was blinking because of new message, it freezes etc etc).
is there any kind of log i could look into just to try figuring out the problem?it is impossible to watch any movie on my pc (currently i don't have tv)i installed windows on external hdd once and it played videos fine so i suppose it's not hardware problem .
View 3 Replies
View Related
Jun 3, 2009
It should never be this hard. no way to get a video playback. at least msn comes with a complete workable system.
View 7 Replies
View Related
Oct 8, 2010
I recently installed Fedora 13 in my laptop, installed the audio codecs(mp3..and etc) and worked just like a dream. But every time I try to play a mpeg, avi, mov file in a player (vlc, xine, mplayer) I get no video, just a black screen. But I get the audio from the video.
View 9 Replies
View Related
Oct 23, 2010
I'm in trouble with playbacks (video and audio, desktop apps and live streams on Firefox). They are all running at least at double speed.
[URL]
Running Fedora 13 - 64 bits - cpu AMD Phenom II X2 955 (dual core) flat, no overclocking, no hacking of any kind. I've tried a re-install of all media codecs and plugins. The problem persists since fresh install of Fedora.
View 3 Replies
View Related
Jun 29, 2011
i use totem and vlc player for video playback, i had enabled the option in both player to prevent screensaver during video playback.yet screensaver is played during a video playback how to fix this bug in fedora 15.
View 5 Replies
View Related
Apr 15, 2010
i am getting sound playback problesm (cracks, pops and sparks) with FC2. i've followed this instructions, but problem continuous anyway:
[Code]....
View 2 Replies
View Related
Feb 13, 2011
I have the nvidia sound card built into my motherboard. Just a few hours ago it started to just stop making any noises what so ever. I rebooted but to no avail. I finally was able to find a fix by purging pulse AND alsa, then reinstalling them and rebooting. The problem is this will only allow my sound to work for about 10-15 mins. Kinda hard to watch "'Neath the Arizona Sky" if you gotta reboot every 15 minutes or so...
I have also purge and reinstalled ubuntu-desktop and that will work temporarily and extend me out another 10-15 mins from when it stopped, but then I still have to reboot.
I am using 10.10 Maverick 64 bit and have been using it for a while, this is the first time this or any other problem has occured.
I have been through the forums and checked every thread I could find with a Bingle search that was in any way related to random sound stoppage. I have tried most of them (did not try the ones that were specific to other cards as far as editing the .conf's for those cards)
View 3 Replies
View Related
Feb 26, 2010
video playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
View 3 Replies
View Related
Apr 11, 2011
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI see [URL]
- Video resolution seems to change during video playback
- Channels cannot be found via DVB-S [URL]
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
Whenever I playback any video material using e.g. VLC, the screen resolution changes. This also applies when playback the video in a window and not fullscreen. The problem is that whenever the screen resolution changes, short time later the TV set blanks screen and show the TV set specific information "unsupported video mode".
How can I enforce to stay in the configured video mode?
View 2 Replies
View Related
Mar 11, 2011
When I play a video in Totem, MPlayer, VLC or whatever, my displayed windows will look transparent in a funny way. Letters are not readable, colours get distorted and images with a black background (colour 0) will display the partial video in it.
View 1 Replies
View Related
Apr 12, 2011
I have the strange problem that my sound and video stops sometimes when I'm not moving the mouse. As long as I keep moving the mouse there is no problem.
I am using
- Fedora 14
- 2 Sound cards (Internal Audio and Audio device on my Radeon HD 3600 video card, however this sound is not working)
View 1 Replies
View Related
Apr 27, 2011
i have fedora 14 and sometimes the sound on my laptop stops to work.e.g. lately it happened when some system sound occured (pidgin message sound) and flash video started at almost the same time (videos)by lost sound i mean i can play music in amarok and i don't hear anything.no sound from flash or system sounds. aplay or paplay is not heard.i tried to log out and log in (restart the desktop session)i had to reboot to fix it.i tried to do "pulseaudio --kill" but that did not helped.any idea what should be restarted in this cases?
code:
lsmod | grep snd
snd_hda_codec_nvhdmi 11784 1
[code]...
View 6 Replies
View Related
Jul 25, 2009
I am experiencing sound problems after an upgrade to kernel 2.6.29.6-213.fc11.i686.PAE from kernel 2.6.29.5-191.fc11.i686.PAE in several games like Neverwinter Nights (linux binaries) and Warcraft III (PlayOnLinux). The sound stops and changes into a very choppy annoying sound. When I boot into the old kernel the problems are gone.
View 14 Replies
View Related
Dec 14, 2010
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
View 6 Replies
View Related
Jan 23, 2011
When I play H.264 / AVC videos from my new camera in totem, the sound plays fine but the video looks like a slide show. I also tried it in xine, the video plays better, but the audio does not play. (the video seems to play in slow motion. the files are saved as *.mp4, and are the same resolution as the *.mp4 files from my old camera which play fine in totem. When I look at the properties of the files, the new ones say that the codec is H.264 / AVC and the ones from my old camera say that the codec is MPEG-4 video. the frame rate is the same for both files.
View 11 Replies
View Related
Jul 17, 2011
I have a weird HD video in wmv and mkf files playback problem. Every HD video i attempt to play using vlc with vaapi hardware acceleration looks like this: My hardware configuration is i3 cpu, and i am using it's integrated HD2000 video card, which has DVI, HDMI and VGA outputs, which all i am using (not at the same time). However, the problem is present in every combination (DVI only. DVI+HDMI. DVI+VGA. DVI+HDMI+VGA).
As for software, I am using stock 32bit Slackware 13.37, with stock 2.37.6 kernel. And for HD video playback I have installed VLC-1.1.10. libva-0.32.0 and MPlayer-20110624 all these packages came from Alien pastures, so they are quality packages And my vlc settings are also stock :/
[Code]...
View 3 Replies
View Related
Feb 15, 2010
I previously posted about noob attempts with Google Earth Problems with Google Earth - openSUSE Forums and discovered my setup 3Ghz Intel p4 i386 with RADEON X300(PCIE) and RADEON X300SE as shown in YaST Hardware Information may not be compatible with linux/opensuse. I've attempted some of the suggestions and either I've had difficulties following instructions (noob alert!) or the solution didn't work for another reason. any offers on improving online playback, in particular; should I get a new graphics card, what would be my best option with limited funds (<50) when I want to be able to watch streams online smoothly but not play games/edit video. Efficient rather than powerful?
View 8 Replies
View Related
Aug 28, 2010
I've been hunting around for some screen capture software in Ubuntu, for future screencasts and out of the handful I've tried I've gone with gtk-recordmydesktop. After initial problems with recording quality, I have managed to get everything working but have noticed that on playback of any captured video, is played back at a crazy speed, the frame rate is not the issue as it is on the default 15 FPS setting but still the play back is very fast.
I noticed before my tweaking that playback was normal speed, but the quality was garbage, and I found that this was because of Compiz being enabled, and I have to run gtk-recordmydesktop with "Encode on the fly" and "Full shots at every frame" enabled in order for the video playback to not be all cut up, however ever since encoding on the fly has been enabled, this has caused playback to be hilariously fast.
I'm running Ubuntu 10.04 with Compiz enabled. With an nVidia GPU (8200 M)
View 1 Replies
View Related
Sep 27, 2010
I have installed Ubuntu 10.4 in my PC , my PC comes with NVIDIA, GeForce 9400 GT. Now every thing is okay except my video, colors come wrong, SMplayer, VLC, ... etc.
View 3 Replies
View Related
Oct 23, 2010
I'm sorry if this was asked before (i know it was but never worked for me) 2 days ago I installed ubuntu 10.10, my very first linux OS and I immediately fell in love with it.The only problem now, is tearing during video playback (I'm a perfectionist with a thing for fine details, so this is literally killing me)
I have nVidia 9200M GS (HP laptop)
I've set nVidia setting to sync vblank and disabled it in compiz
I've also disabled PowerMizer..
I love the system to give up some vsync issues in moving windows, but i just can't get over video tearing. I'm ready to install anything, change anything, even do a new clean install to get it working. UPDATE: Installed SMPlayer, works fine but drops couple of frames every 5 secs or so (more annoying than tearing lol) is there any specific settings that can fix that?
View 2 Replies
View Related
Apr 8, 2011
Both MP4 and OGV playback completely weird on my Ubuntu 10.04.2 laptop:
The resolution/length/etc is correct, but the picture is all weird. Webm doesn't work at all.
I tried mplayer, kmplayer, smplayer, gxine, totem and kplayer. All the same.
However, the exact same video's play back normally in HTML5 pages with a bunch of browsers on the same machine. They also play back normally on a Windows machine. There is no DRM involved.
Aren't these gstreamer en mplayer based players supposed to handle this correctly?
This is an Intel Core i3 machine with Intel HD graphics.
View 9 Replies
View Related
May 18, 2011
i am loving the ubuntu 10.10 interface.my laptop is a toshiba satellite l450 (3gb ram + 2.10ghz amd proc essor. i use a ati radeon hd 3200 graphics card.i have to manually adjust the sound settings if i plug in a headphone or a hdmi cable to suit the necessary output. windows did this automatically.my video quality is very very poor. if i run videos on any browser or watch a movie (avi file) on totem or vlc it is very jumpy and the sound is often out of sync.
View 1 Replies
View Related
Feb 1, 2010
Im confused about buying nVidia 9800 GT or ATI HD 4770, In the 1st place I am going to buy this card to play HD videos 720p & 1080i and in the 2nd place to play games.I was using nVidia 6200 LE which doesnt support VDPAU, So nVidia use VDPAU in the newer cards to play movies, my question is:* Does ATI have something like VDPAU that have the same video playback performance ?
View 1 Replies
View Related
