Slackware :: HD Video Playback On 2nd Gen Core I3 With Vlc?
Jul 17, 2011
I have a weird HD video in wmv and mkf files playback problem. Every HD video i attempt to play using vlc with vaapi hardware acceleration looks like this: My hardware configuration is i3 cpu, and i am using it's integrated HD2000 video card, which has DVI, HDMI and VGA outputs, which all i am using (not at the same time). However, the problem is present in every combination (DVI only. DVI+HDMI. DVI+VGA. DVI+HDMI+VGA).
As for software, I am using stock 32bit Slackware 13.37, with stock 2.37.6 kernel. And for HD video playback I have installed VLC-1.1.10. libva-0.32.0 and MPlayer-20110624 all these packages came from Alien pastures, so they are quality packages And my vlc settings are also stock :/
When I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
video playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI see [URL] - Video resolution seems to change during video playback - Channels cannot be found via DVB-S [URL]
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU - 8 GByte RAM - Biostar TA890GXE - Samsung LE40M86BD, connected via HDMI (and only HDMI) - Mythbuntu 10.10 with proprietary drivers installed - Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
Whenever I playback any video material using e.g. VLC, the screen resolution changes. This also applies when playback the video in a window and not fullscreen. The problem is that whenever the screen resolution changes, short time later the TV set blanks screen and show the TV set specific information "unsupported video mode".
How can I enforce to stay in the configured video mode?
When I play a video in Totem, MPlayer, VLC or whatever, my displayed windows will look transparent in a funny way. Letters are not readable, colours get distorted and images with a black background (colour 0) will display the partial video in it.
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element err:alsa:wine_snd_pcm_recover underrun occurred err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
I recently installed Fedora 13 in my laptop, installed the audio codecs(mp3..and etc) and worked just like a dream. But every time I try to play a mpeg, avi, mov file in a player (vlc, xine, mplayer) I get no video, just a black screen. But I get the audio from the video.
I've been running F12 x86_64 for almost a week now without significant issues, until now. I found this annoying problem with the audio system during video playback (both with VLC and with Kaffeine).It happens after a while playing a video: sound just stops (video continues). I found that sound is not dead though (can open Rhythmbox and music sounds).I discovered some system messages in /var/log/messages regarding this (attached).What could be happening
I previously posted about noob attempts with Google Earth Problems with Google Earth - openSUSE Forums and discovered my setup 3Ghz Intel p4 i386 with RADEON X300(PCIE) and RADEON X300SE as shown in YaST Hardware Information may not be compatible with linux/opensuse. I've attempted some of the suggestions and either I've had difficulties following instructions (noob alert!) or the solution didn't work for another reason. any offers on improving online playback, in particular; should I get a new graphics card, what would be my best option with limited funds (<50) when I want to be able to watch streams online smoothly but not play games/edit video. Efficient rather than powerful?
I've been hunting around for some screen capture software in Ubuntu, for future screencasts and out of the handful I've tried I've gone with gtk-recordmydesktop. After initial problems with recording quality, I have managed to get everything working but have noticed that on playback of any captured video, is played back at a crazy speed, the frame rate is not the issue as it is on the default 15 FPS setting but still the play back is very fast.
I noticed before my tweaking that playback was normal speed, but the quality was garbage, and I found that this was because of Compiz being enabled, and I have to run gtk-recordmydesktop with "Encode on the fly" and "Full shots at every frame" enabled in order for the video playback to not be all cut up, however ever since encoding on the fly has been enabled, this has caused playback to be hilariously fast.
I'm running Ubuntu 10.04 with Compiz enabled. With an nVidia GPU (8200 M)
I have installed Ubuntu 10.4 in my PC , my PC comes with NVIDIA, GeForce 9400 GT. Now every thing is okay except my video, colors come wrong, SMplayer, VLC, ... etc.
I'm sorry if this was asked before (i know it was but never worked for me) 2 days ago I installed ubuntu 10.10, my very first linux OS and I immediately fell in love with it.The only problem now, is tearing during video playback (I'm a perfectionist with a thing for fine details, so this is literally killing me)
I have nVidia 9200M GS (HP laptop) I've set nVidia setting to sync vblank and disabled it in compiz I've also disabled PowerMizer..
I love the system to give up some vsync issues in moving windows, but i just can't get over video tearing. I'm ready to install anything, change anything, even do a new clean install to get it working. UPDATE: Installed SMPlayer, works fine but drops couple of frames every 5 secs or so (more annoying than tearing lol) is there any specific settings that can fix that?
Both MP4 and OGV playback completely weird on my Ubuntu 10.04.2 laptop:
The resolution/length/etc is correct, but the picture is all weird. Webm doesn't work at all.
I tried mplayer, kmplayer, smplayer, gxine, totem and kplayer. All the same.
However, the exact same video's play back normally in HTML5 pages with a bunch of browsers on the same machine. They also play back normally on a Windows machine. There is no DRM involved.
Aren't these gstreamer en mplayer based players supposed to handle this correctly?
This is an Intel Core i3 machine with Intel HD graphics.
i am loving the ubuntu 10.10 interface.my laptop is a toshiba satellite l450 (3gb ram + 2.10ghz amd proc essor. i use a ati radeon hd 3200 graphics card.i have to manually adjust the sound settings if i plug in a headphone or a hdmi cable to suit the necessary output. windows did this automatically.my video quality is very very poor. if i run videos on any browser or watch a movie (avi file) on totem or vlc it is very jumpy and the sound is often out of sync.
No sound on my Fedora when I play stuff on my hard disk. Video plays but there would be no sound. But there is sound/audio when I start using a browser. So I guess flash is working. Any basic trouble shooting stuff for audio? I tried this [URL] but the stuff is way over my head.
Im confused about buying nVidia 9800 GT or ATI HD 4770, In the 1st place I am going to buy this card to play HD videos 720p & 1080i and in the 2nd place to play games.I was using nVidia 6200 LE which doesnt support VDPAU, So nVidia use VDPAU in the newer cards to play movies, my question is:* Does ATI have something like VDPAU that have the same video playback performance ?
While playing videos on Linux (both Mint and Fedora) I noticed that the video will often pause for about 10 seconds or so while the audio keeps playing. After the 10 second freeze the video resumes where it should be. I've had this problem both on Mint 9 and Fedora 13 and 14.
When I play videos in VLC, the video output seems to randomly freeze while playing the video. This does not effect the audio though. The audio output continues, but with the video frozen on a frame. This is happening in windowed and full-screen mode. I have to use "pkill vlc" each time twice then start VLC again. I have had to resort to mplayer for the time being. I am running squeeze. I was not experiencing this problem before though (started within the past week), so it must be due to some recent upgrade. I have tried "aptitude purge vlc && aptitude install vlc", but I am still experiencing the same problem.
I'm in trouble with playbacks (video and audio, desktop apps and live streams on Firefox). They are all running at least at double speed.
[URL]
Running Fedora 13 - 64 bits - cpu AMD Phenom II X2 955 (dual core) flat, no overclocking, no hacking of any kind. I've tried a re-install of all media codecs and plugins. The problem persists since fresh install of Fedora.
i use totem and vlc player for video playback, i had enabled the option in both player to prevent screensaver during video playback.yet screensaver is played during a video playback how to fix this bug in fedora 15.
KDE ships with the Dragon player for video playback. Trying it many times I still find it hard to use with clunky interface and playback problems, and I go back to MPlayer. How many in openSuse community use Dragon player?
I just finished trying to install the codecs for various audio/video playback (Restricted Formats/11.2 - openSUSE - Community) and now I can play flash, mp3s and such but most of the video playback is very jittery and is not watchable. I have now tried it with mplayer and kaffine but still the same. I had this problem before as well and even tried VLC but no luck. I had thought I could just add the Nvidia repository and type in my graphics card, install and be done with it but no such luck (nothing even comes up when I type geforce).
Whenever I play a video via vlc or kaffeine and I switch to full screen I get lag. If I move my mouse to show the controls it plays perfectly. How can I fix my full screen playback issues?
I recently just installed Ubuntu on this laptop and I have a issue with playing back videos on my LAN server.
Thing is, I've got another computer too where it works flawlessly so I was wondering what causes this on my laptop...
I mount the FTP location and I get access to all the files on the server. On my other computer, I can basically just click any video file and it would act as it would if it was on my HDD already, but when I try to do that on my laptop it will not play the video file at all.
I've tried several media players too, but I usually just use VLC so here is the VLC error:
Code:
And then ask if I want to repair it. However, once I drag the file over to my desktop it works.
So why won't my media players read video files over FTP?
And the whole "Connect to server" is acting a little weird. If I try to use the DNS of the server instead of the local IP I will not get any response. However, using the DNS in other applictions do work.
I have a Dell Latitude CPi that has 400MHz Intel Processor and 256 MB of ram. It has a Neomagic Corporation NM2360 [MagicMedia 256ZX]. I have it set to 16 bit color depth and it is using the neomagic driver. My problem is that it cannot play any video of any size flash, or saved to hard drive. It has a fps so low that I can see it rendering each frame going across the screen. It doesn't seem to have a problem with animated pictures, just actual video files. I don't know whether or not this matters but the card set is known to not support 3d acceleration. I can run any commands in terminal and have a good understanding of the linux environment. This problem has occurred under Ubuntu and Xubuntu and still happens if I use a light weight WM like fluxbox.
I'm having some problems with flash in mozilla and chrome. video playback is fine but none of the buttons are working.for example i cant pause or change the volume. pretty sure my flash is up to date. i have ubuntu netbook remix on another pc without this same problem.
When trying to playback DVDs in VLC media player, I have to switch the video output driver to get any playback.If I leave it on "Default" (which I think is defaulting to "XVideo Extension Video Output"), I get a solid green or blue screen (which I also get with "Xvideo Extension Video Output")If I switch it to "OpenGL Video Output", I get proper DVD playback but it is kind of pixelated and ugly.If I switch it to "X11 Video Output", I get DVD playback that is very crisp and sharp, the image quality is great.unfortunately, the colors are completely messed up and the blue is completely saturated.I've played with the color settings (especially the Hue setting), but I can't get the colors to look right.
I'd really like to use the x11 video output since the quality is the best, but I can't get the colors right.the first one (Screenshot.png) is OpenGL output, and the second (Screenshot-1.png) is X11 output.It's also worth noting that I am on an IBM ThinkPad R32 with an ATI Mobility Radeon 7000 (or M6, or M6 LE, whatever you wanna call it).I'm running a fully updated 9.04 Jaunty installation.
I've installed Ubuntu 9.10 and the prime reason for giving it a go is due to the media center capability with apps such as Moovida and LinuxMce.
Unfortunately during video playback [either divx or flash] there appears to be a random line or lines which flickers on the screen when the video is in fullscreen mode.
I'm using an ATI x1900 video card and have tried using both Tote and VLC, and I have also tried installing the fglrx.
But, both with and without flgrx installed, under the section 'Device' in xorg.conf it says that the driver is 'vesa'.
I don't know how to disable the default ATI driver to enable fglrx, or whether I am going off on completely the wrong tanget and should be looking at something else.
Or is there better support for my type of card in Ubuntu 10 as I don't want to go back to Ubuntu 8 which is the last supported version of the os that ATI developed a driver for my card.
I have a 30" LCD with 2560x1600 pixel resolution. I would like to make and play videos at this resolution, but software decode is too slow, and the GPU accelerated decode (VDPAU) maxes out at 2048 pixels. It might be possible to decode 2Kx2K and cut-and-paste and reorganize the rectangles to fill 2560x1600. But someday I plan on getting a 4K screen (4096x2160 pixels) and I would like to support that too. For that it seems two video streams decoded by two GPUs and exactly synchronized would work.
