Ubuntu :: Pause Of About 30 Seconds During Boot?
May 3, 2010
I'm using a MacBook 2.1 with Lucid.
After i hit Enter in GRUB, there is a message on top of the screen saying "booting up", and it stays there for 20 to 30 seconds. Then everything proceeds normally. I think i caught a message saying that something couldn't be found, but it flashed too rapidly.
Here is an extract of my dmesg. I'm assuming the part between [] is timestamps, and it takes about 40 seconds to go from GRUB to the Login screen, so it fits. Nothing is happening during 32 seconds.
Code:
[ 2.690053] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 2.894315] usb 5-1: configuration #1 chosen from 1 choice
[ 35.053835] udev: starting version 151
[ 35.059728] Adding 1999992k swap on /dev/sda3. Priority:-1 extents:1 across:1999992k
[Code]....
View 9 Replies
ADVERTISEMENT
Jan 7, 2010
I have just installed Ubuntu for the first time, and I installed sucessfully World of Warcraft, but I'm noticing some networking issues where my whole network connection seems to pause for about 5-10 seconds at a time, which I finally realized when I played WoW. So i was curious where the settings are that I can change to possible eliminate that, or what others have done to increase their network throughput on their cards.
I'm running Unbuntu 9.10 64bit with the latest version of Wine from the Synaptic Package Manager. The router is a LinksysWRT54G3G-ST and my wireless network card I think is something made from MSI I don't see where to find out what drivers are installed on it I'm probably just looking in the wrong place or I'd give more information on the card.
View 9 Replies
View Related
Dec 16, 2010
While playing videos on Linux (both Mint and Fedora) I noticed that the video will often pause for about 10 seconds or so while the audio keeps playing. After the 10 second freeze the video resumes where it should be. I've had this problem both on Mint 9 and Fedora 13 and 14.
View 3 Replies
View Related
Oct 17, 2010
My system after installing Ubuntu 10.04 has an annoying 30 second pause during the boot process. It comes after BIOS checks and before the splash screen, the monitor is just black with a flashing cursor. The system has two IDE drives (/boot and /home) and a SCSI drive (/). There is a SCSI MO drive on it's own controller.
Partial lspci:
01:09.0 SCSI storage controller: Adaptec AIC-7892B U160/m (rev 02)
01:0a.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 23)
I attached a clip from bootchart and a boot log file.
View 9 Replies
View Related
Jul 14, 2011
Just the last day or so, I've noticed a long pause when I boot my laptop, with lots of disk activity. dmesg says:
[Code]...
Why would there be a 15-second pause (during which the disk is slammed) between mounting root and mounting swap? During this time I see nothing but a blank purple screen, there are no cycling dots or text scroll. Is this normal and I'm just freaking out over nothing because there's no indicator of progress? GRUB default boot options: quiet splash nomodeset video=uvesafb:mode_option=1920x1200-24,mtrr=3,scroll=ywrap vt.handoff=7
View 9 Replies
View Related
Jun 17, 2010
I am looking to speed up my boot time; it is currently around the 2-2.5 minute mark from Grub to desktop (including about 15 seconds at the login screen while I type my password).
I have forced ureadahead to reprofile, and have rebooted a few times until the boot time is fairly stable/consistent.
No xorg errors and only one warning ((WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.)
However, dmesg reports the following:
Code:
...
[ 1.121369] Freeing unused kernel memory: 656k freed
[ 1.121926] Write protecting the kernel text: 4676k
[ 1.121977] Write protecting the kernel read-only data: 1840k
[ 1.146159] udev: starting version 151
[Code].....
View 9 Replies
View Related
May 19, 2010
I've been using lucid since the pre alpha and I don't know why but I think it kept getting slower and slower to me until I've noticed "Windows" for god's sakes starts up faster than lucid! I've looked for some suggestions but nothing paid off. I've made a boot chart for my boot. I've noticed mount.ntfs-3g is taking too much time but how to stop it. My fstab is
Code:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
[Code].....
View 8 Replies
View Related
Nov 12, 2010
I dual boot Ubuntu with Windows, so every time I turn on my computer, I have to choose a system.
I rarely use Windows, but I still need it on here for some applications. Being that I'm going to be using Ubuntu 90% of the time, I was wondering if there was a way to boot directly to Ubuntu without erasing Windows.
Is this possible? I'd want to be able to press a key at start up or something so I can still use Windows if I want to.
If that's not possible, how do I edit the boot screen so instead of 14 seconds (or whatever it is), it boots Ubuntu in one or two seconds?
View 9 Replies
View Related
Sep 1, 2011
The boot splash only appears for 2 seconds, and it doesn't even have the ubuntu logo / loading bullets. After 8 or so seconds later, the boot splash (with ubuntu logo / loading bullets) will either reappear for disk checking or error reporting or it displays the login screen.
ATI Technologies Inc Cypress [Radeon HD 5800 Series]
Driver: ATI/AMD proprietary FGLRX graphics driver
Direct Rendering: Yes
Memory: 1GB
Ubuntu 11.04 (Natty Narwhal)
Kernel: 2.6.38-11-generic
Architecture: 64-bit
Processor: AMD Phenom(tm) II X4 965 Processor
Memory: 6GB
View 1 Replies
View Related
May 4, 2010
I know this isnt normal for everyone but im getting a 29 to 30 second bootup on 10.04 from grub to login screen.. i installed boot up manager and disabled some of the things listed on a few recommendation pages on google where would i begin to figure this out? before i upgraded i was booting up at like 10 seconds tops..
View 1 Replies
View Related
Nov 7, 2010
My ubuntu(10.10) installation takes a relatively longer time (90 seconds) to boot. I think part of the problem might be related to an error message during boot related to usb drivers.
Code:
[2.717076] usb 4-1: new low speed USB device using ohci_hcd and address 2
[3.244051] usb 4-2: new full speed USB device using ohci_hcd and address 3
[12.029046] /build/buildd/linux-2.6.35/drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
I have attached the relevant part of dmesg output also.
View 6 Replies
View Related
Feb 17, 2010
How can i change the seconds at boot , I have a image maybe i will help And how can i change the background,
View 4 Replies
View Related
Nov 22, 2009
I have been enjoying Fedora 11 for sometime, and decided to try Fedora 12. All in all it is working, but the boot sequence seemed much slower. I decided to use bootchart to examine the boot process on my old F11 and new F12 installations. The result show F11 booting in ~34 seconds, and F12 booting in ~57 seconds. Interestingly, the first 30 seconds show that only kthreadd, khelper, and ata/0 are running. CPU and disk utilization are both zero during this 30 seconds span, then all of a sudden everything starts loading, CPU and Disk utilization spike up, and ~23 seconds later I get to the login screen. I sent an email to Harald Hoyer about this, and to my surprise he was kind enough to respond. He suggested I check the BIOS to make sure I had disabled the floppy drive, which I did. The problem persists, so I was wondering if anyone here was having a similar issue and if so how they have dealt with it. I have blacklisted the floppy module (just to make sure)
View 5 Replies
View Related
Jan 12, 2011
I used LILI to create a live USB key - I believe I used the 686MB version. Everything worked fine. I wanted to try the full DVD install, so I did the same with that image.
Now, it doesn't matter if I load it in virtualbox or if I boot up my comp with the USB stick, I get to the Linux boot menu, choose "Persistent Mode", and then below it shows "Automatic boot in 10 Seconds..."
Once it counts down to 0 it just resets to 10, and keeps on counting!
View 4 Replies
View Related
Jun 25, 2011
Some days ago I switched from Ubuntu to Fedora and it is just great, Gnome 3 looks awesome. I waited for the installation of Fedora until I got my new OCZ Vertex 2 SSD and the first benchmarks were astonishing. The SSD has an average Read/Write speed of ca. 270Mb/s. Well, now I installed Fedora 15 and I was expecting a boot time of less than 20 seconds, but in fact it takes 30 seconds. By way of comparison, Ubuntu takes on my old HDD about 27 seconds, so a bit less than it takes on the SSD.
Then I tested some software, I started Eclipse and compared the start time on Ubuntu (HDD) and on Fedora (SDD). Starting Eclipse from the HDD took about 6 seconds while starting from the SSD took about 7 seconds. The differences in the results are not big, but taking into account that the SSD is at least twice as fast as the HDD the results are really strange. Now I would like to ask you how I may increase the performance of Fedora on my SSD?
Some notes about my hardware:
Intel Core2Duo 3GHz
4GB Ram
Sata2
On this screenshots you can see both drives in comparison, the ssd is much faster.
View 2 Replies
View Related
Nov 22, 2009
i could manage to install fedora 12 on my laptop (asus f6a) using the iommu=off option, but when i try to boot it i just reboot without even seeing the fedora logo, i just see the the prompt for 5 seconds and then it reboots.
View 3 Replies
View Related
Jun 3, 2010
I have had this issue for a while on my centos 5.4 dedicated server with 1and1. If I reboot my system, my connection starts and then drops in about 10 seconds after the system has booted.I connected through the serial console and noticed there was only one thing that seemed suspicious while booting. named could not start for some reason. So my question is - are these 2 problems related? If not, what could be the reason for my connection to drop?At the moment the only way of getting the connection back up is by running dhclient. This works until the next reboot.
View 1 Replies
View Related
Aug 21, 2010
I have had this issue for a while on my centos 5.4 dedicated server with 1and1. If I reboot my system, my connection starts and then drops in about 10 seconds after the system has booted. I connected through the serial console and noticed there was only one thing that seemed suspicious while booting. named could not start for some reason.
So my question is - are these 2 problems related? If not, what could be the reason for my connection to drop? At the moment the only way of getting the connection back up is by running dhclient. This works until the next reboot.
View 13 Replies
View Related
Jan 14, 2009
Im trying to install Fedora 10 on to my HP Pavilion a340a (full product specifications: [url] ), i boot from the cd and it says "Automatic boot in 10 seconds..." etc, i get past that screen and am then at a screen with 2 shades of blue and a white bar moving at the bottem of the screen towards the words "Fedora 10", on the next screen, the log on screen, all the text is jumbled up and distorted, and everything appears frozen, except that i can move the mouse. I am not sure what the problem is but i know its not the cd because after having problems with hp pc i decided to try it on my Acer Extensa 2300 laptop (1.5ghz, 1.2gb ram, 40gb hdd, 32mb intel integrated graphics) and that installed fine, without a problem. This has led me to beleive that Fedora may not be liking the intel graphics on my HP Pavilion, and i dont know why. i really want to use Fedora 10 on my desktop. I should mention that i want to dual boot Windows XP and Fedora 10 on Pavilion, windows is already installed.
View 7 Replies
View Related
Jul 23, 2010
I'm using Git to get my self an enourmous (2.5 gig) repository. Is there anyway I can PAUSE it?
OR is there anyway I can "half" download it, and keep what I have?
View 3 Replies
View Related
Feb 1, 2010
Is there a way to pause installations/updates? If there is not, would it be possible to implement that?It seems these days that installations through synaptic seem to take ages to download files. While downloading the files, ubuntu will not let you run any other package manager. So if I am updating my system or installing several programs through synaptic, I am unable to install anything else. For example a deb file ive downloaded, or i would like to install a single program while all these other files download.
I can understand not being able to install multiple things at once, but why is it not possible to install things while it downloads the files? Sometimes it days several hours/days to download the files.
View 2 Replies
View Related
Apr 21, 2010
Can I Remove Pause in BitTorrent?
View 2 Replies
View Related
Dec 7, 2010
is it possible to pause the downloading from terminal.n how can i resume from same status.
View 3 Replies
View Related
Jan 19, 2011
what i need to do is to be able to place a command to slow down the sequence of commands in an Ubuntu script.
normally, the system will attempt to execute them all as fast as it can, but i need to be able to specify short pauses between commands
anyone know of a useful command to do this?
btw, the "sleep" command i saw somewhere hasn't quite worked in my scripts for some reason.
View 2 Replies
View Related
Aug 4, 2011
I set the default os to boot as windows 7 with a timeout of 1 second. I thought that this would be enough time to switch os ubuntu when i need to, but I am unable to. How can i reset the timeout to 3 seconds? I also cannot view the ubuntu partition within windows because of ubuntu's file system.
View 9 Replies
View Related
Apr 4, 2010
I have a task that I need to let run while I'm away from the computer. It's very CPU intensive and I've even had to throttle down my processor to 3GHz to keep it from overheating. I'm using a combination of GNOME Sensors App and CPU Frequency Scaling Monitor to control the overheating problem. I have the sensors app set to alarm and "killall" at 61 Degrees Celsius. The sensors app has an option where you can enter a command that it will run for you. All I need is to know what command to run that can pause this task. So later I can resume it.
I know it can be done. System Monitor has an option to "stop" a task. It also has "continue". This is how I've been doing it while I'm at the computer. So if anyone knows what the commands are that System Monitor uses, that would be a huge help. By the way, I'm using Ubuntu 9.10 with all current updates.
NOTE: For anyone who is about to flame me for having a computer that overheats and wants to tell me that this is the problem I should be after. It only overheats during this process. Not for any games or compiling or rendering or encoding. Nothing else. I have even bought a new heatsink and fan. I have redone the thermal compound on the Processor. My processor usually runs at idle around 36-39 Celcius and under normal load around 47-53 Celsius.
View 3 Replies
View Related
Dec 11, 2010
First off I'm on Ubuntu 10.10 and I use Amarok as my main media player. My question is this: I have hot keys for forwards skip, play, pause and backwards skip on my laptop and I was wondering how I set them to work for Amarok.
View 2 Replies
View Related
Oct 20, 2010
Is there any app that allows the user to pause/stop apps in a way like xkill? My notebook cpu is a crappy CeleronM from 3 years back. So sometimes I want to just devote all my attention to one app or want to stop some apps from sucking up juices. I don't want to tweak with the nice level manually nor go through sys mon.
XKill I have configured xkill with a hotkey. That way, I press the hotkey, and the cursor turns to a 'X' cross, and I click on the app that I want to kill (usually a hung app). This means I can avoid the console and the system monitor app.
XStop / XPause? Can I do the same for pausing or stopping apps? Bind it to a hotkey and a 'X' cross appear for the cursor, and I can pause apps? Ideally, I should be able to unpause it in similar way.
View 5 Replies
View Related
Oct 22, 2010
This problem has occurred over a few years and with a number of Gnome distributions, including Ubuntu and Fedora, and it just won't go away. I just installed Ubuntu 10.10 / Gnome. Almost immediately, windows that opened would grey out and temporarily freeze. The mouse can still move, most of the time. The greying of windows can happen frequently or not a all for a while. The freezing can last a few seconds or many. This inconsistency makes it difficult for me to figure out what is triggering this problem. I don't know if it is hardware related, either.
View 2 Replies
View Related
May 17, 2011
I need to run a script that I build to build a word list. Essentially what it does is run through a base list and expands that into billions of words. This way I can keep a small dictionary file and a script to expand it into a larger file (about 500 gigs). This script should take anywhere from 12-14 days to run and on my last day the power went out at my house. Is there anyway I can run this again with a fail over system? I know a battery back up is an ideal addition to my home server but if the power is out for an hour it wouldn't have made a difference. Also if I had the ability to pause the script do a reboot and resume it again that would be amazing.
View 5 Replies
View Related
