Ubuntu :: Video Playback Very Fast With Gtk-recordmydesktop
Aug 28, 2010
I've been hunting around for some screen capture software in Ubuntu, for future screencasts and out of the handful I've tried I've gone with gtk-recordmydesktop. After initial problems with recording quality, I have managed to get everything working but have noticed that on playback of any captured video, is played back at a crazy speed, the frame rate is not the issue as it is on the default 15 FPS setting but still the play back is very fast.
I noticed before my tweaking that playback was normal speed, but the quality was garbage, and I found that this was because of Compiz being enabled, and I have to run gtk-recordmydesktop with "Encode on the fly" and "Full shots at every frame" enabled in order for the video playback to not be all cut up, however ever since encoding on the fly has been enabled, this has caused playback to be hilariously fast.
I'm running Ubuntu 10.04 with Compiz enabled. With an nVidia GPU (8200 M)
View 1 Replies
ADVERTISEMENT
Oct 21, 2010
I recently tried out recordMyDesktop (not the GTK+ frontend, just the CLI program, I wanted to Keep It Simple this time ), and found that the videos it records/encodes show massive motion-smearing artifacts when played back. This is without the "--on-the-fly-encoding" option; with it, the video looks fine (i.e. has no artifacts other than the typical ones found in any compressed video), but it plays back too quickly (the time-step between frames is too high, thus making everything go too fast when the video is played back, even though the frame rate is low). Here's a screenshot of the video playing, showing what the artifacts look like (they're nasty!).
I've searched Google and LQ about this problem to no avail: either there were no relevant results, or it was just a post on a different forum asking basically the same question, but with no answer. So apparently this problem is either really rare, or it's something specific to my configuration, and mine alone (highly unlikely).
System specs:
CPU: Intel� Core� i5 430M @ 2.27 GHz
GPU: NVIDIA GeForce� 310M w/ 512 MiB VRAM
RAM: 4 GiB
Command used to record:
Code:
recordmydesktop --fps 30 --no-sound --no-frame --overwrite -o /home/mrcode/Videos/capture.ogv
I've tried different options, such as --quick-subsampling, as well as tweaking the video quality and bitrate settings (--v_quality and --v_bitrate), all of which did nothing to change/get rid of the artifacts.
View 4 Replies
View Related
May 14, 2010
I have two Ubuntus installed. A 10.04 and a 9.04. In 9.04 if I watch a video in Firefox, it works very smoothly and nicely. Using the "top" command, totem-plugin-vi is using the most cpu time at about 16%, and xorg is using about 5%. But in 10.04, totem is using 72% and xorg is using 26%, and it looks really choppy. I think watching DVDs is the same way. I checked "Hardware Drivers" in the System->Administration menu (in 10.04) and it said "No proprietary drivers are in use on this system." I'm guessing maybe I'm using different video drivers on each system, but I don't even know how to check. and here is an excerpt from lspci:
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
View 3 Replies
View Related
Mar 4, 2011
After working properly for over a year my videos started playing in fast forward. This can be on the internet (as in wwww.wimp.com) or my video clips located on my hard drive.
Also, on a different note my volume control stopped working. My keyboard has a volume control wheel that I used to use to control the volume of music and videos. First it gave out on my side and continued to work on my wife's side and now it doesn't work on ether. (the volume level bar pops up on the screen but doesn't affect the output) (The volume can still be controlled with the mouse though by clicking on the volume bar on whatever web page I am looking at.)
View 6 Replies
View Related
Oct 23, 2010
I'm in trouble with playbacks (video and audio, desktop apps and live streams on Firefox). They are all running at least at double speed.
[URL]
Running Fedora 13 - 64 bits - cpu AMD Phenom II X2 955 (dual core) flat, no overclocking, no hacking of any kind. I've tried a re-install of all media codecs and plugins. The problem persists since fresh install of Fedora.
View 3 Replies
View Related
Oct 27, 2010
I am having music playback issues in lucid right now. When I try to play music through any player, the music plays at a slightly higher speed - roughly 10% faster (a 3:17 song finishes in 2:5. I tried installing 10.10 and had the same problem, and I just went back to 10.04 with a fresh install and still seeing the issue. Is this a common problem for people? My sound hardware is the following as reported by lspci
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
For reference, I also have 2 other boxes in the house running 10.04 with different sound hardware with no issues. Their hardware are:
00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
View 4 Replies
View Related
Nov 17, 2010
I'm having an issue with playback in Amarok 2.3 on openSUSE 11.3. When using xine, Amarok will playback songs very quickly, probably something like 3X-4X faster than it should be. There is also no audio output when it does this. Using gstreamer it plays back at normal speed, but also without audio output. I've done some searching for this problem, but haven't found anything helpful. Any ideas are greatly appreciated. Below I'm listing all the multimedia/codec packages that I have installed.
gst-fluendo-mp3-2-37.6.i586
gstreamer-0_10-0.10.29-1.7.i586
gstreamer-0_10-ffmpeg-0.10.6-42.pm.1.i586
[code]....
View 8 Replies
View Related
Nov 17, 2010
I am new to this forum and have recently switched to Ubuntu. The OS installed without a hitch and was able to get video card, wireless internet installed with relative ease. However, I have encountered a problem installing my E-mu 0404 PCI sound card via the ALSA packages in Synaptic.
Code: 04:03.0 Multimedia audio controller [0401]: Creative Labs SB0400 Audigy2 Value [1102:0008] As you can see once the packages were installed the OS could see the hardware ok, but when I tried playing a standard MP3 file (16 bit, 44.1khz, 192kbps) in Totem it started playing the file back around 15-20% faster than normal? To me it sounds as if the software is playing the audio back at higher sample rate than 44.1khz hence the faster speed, though I'm not 100% on that.
The next thing I tried was playing the same file back in VLC and it was exactly the same (15-20% too fast), but this time it was horrible and glitchy as well, almost as if the audio buffer size was set to small. The same thing happened when I tried playing back some flac and wav files (all 16 bit, 44.1khz) also. I have searched google (and read the comprehensive sound card guide on this forum) and read several forums, guides, etc. for anybody posting the same issue with this particular card but could find nothing. From all reports I've read this card should work fine under ALSA. For the record I'm using Ubuntu 10.10 64bit kernel running on a Dell Dimension 9200 (Intel Core2Duo E6400 2.13ghz) with 2GB RAM.
View 9 Replies
View Related
Jan 4, 2011
I use record mydesktop to record what i do in mydesktop. But when i stop record. This box appear. I wait... wait... and wait. But the process encode never complete .
View 5 Replies
View Related
Oct 31, 2010
I like to make tutorials on several different things, and since I'm a ubuntu user now, I found Record my Desktop. The thing is, When I stop the video, the encoder takes FOREVER! I left it there for over 5 minutes and it's still at 0%.
View 1 Replies
View Related
Dec 17, 2010
Either recordmydesktop produces corrupted files or nothing (mencoder, ffmpeg, kdenlive, pitivi) can open it. (How come totem can?) I need to just stick some text and some sound on this clip but nothing works.
View 4 Replies
View Related
Oct 17, 2010
When I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
View 1 Replies
View Related
Feb 26, 2010
video playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
View 3 Replies
View Related
Apr 11, 2011
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI see [URL]
- Video resolution seems to change during video playback
- Channels cannot be found via DVB-S [URL]
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
Whenever I playback any video material using e.g. VLC, the screen resolution changes. This also applies when playback the video in a window and not fullscreen. The problem is that whenever the screen resolution changes, short time later the TV set blanks screen and show the TV set specific information "unsupported video mode".
How can I enforce to stay in the configured video mode?
View 2 Replies
View Related
Mar 11, 2011
When I play a video in Totem, MPlayer, VLC or whatever, my displayed windows will look transparent in a funny way. Letters are not readable, colours get distorted and images with a black background (colour 0) will display the partial video in it.
View 1 Replies
View Related
Jun 26, 2009
I have had F11 installed for over a week. When I play a video or a sound file it plays fast. All the audio is whinny and voices are high like its playing to fast. If i match the time it does play about 6 seconds fast.
View 3 Replies
View Related
Feb 10, 2010
I recently installed Fedora 12 on a new gigabyte mb and for unknown reasons to me videos from ..... and others run very fast (5X) or more, and I'm also unable to get audio to work. All this only happens if I'm using KDE, all work ok in GNOME.
View 13 Replies
View Related
Feb 8, 2010
I have loaded 9.10 ( 64 bit ) under VMWare Workstation 6.5 and each new install results in fast audio ( mp3 ) and video ( avi, mpg, etc ) playback. I am trying to keep the installs as vanilla as possible. My other VM distros are fine.
I am creating the VMs under vista x64, SP1 ( now updated to SP2 ), using workstation 6.5 ( will upgrade to 7 later on ).
View 3 Replies
View Related
Sep 1, 2010
I can play mp3, ..... etc. fine on gnome. However on kde, they always play at 3x or 4x speed. In fact, they just run through, not producing any sound. I can see the video zipping past on ...... Is there a setting for this on kde, that needs to be fixed?
View 2 Replies
View Related
Aug 7, 2011
Since kernel update 2.6.40 Totem plays video like in Fast Forward (no sound). Reverting to 2.6.38 solves the problem.
View 3 Replies
View Related
Sep 27, 2010
I have installed Ubuntu 10.4 in my PC , my PC comes with NVIDIA, GeForce 9400 GT. Now every thing is okay except my video, colors come wrong, SMplayer, VLC, ... etc.
View 3 Replies
View Related
Oct 23, 2010
I'm sorry if this was asked before (i know it was but never worked for me) 2 days ago I installed ubuntu 10.10, my very first linux OS and I immediately fell in love with it.The only problem now, is tearing during video playback (I'm a perfectionist with a thing for fine details, so this is literally killing me)
I have nVidia 9200M GS (HP laptop)
I've set nVidia setting to sync vblank and disabled it in compiz
I've also disabled PowerMizer..
I love the system to give up some vsync issues in moving windows, but i just can't get over video tearing. I'm ready to install anything, change anything, even do a new clean install to get it working. UPDATE: Installed SMPlayer, works fine but drops couple of frames every 5 secs or so (more annoying than tearing lol) is there any specific settings that can fix that?
View 2 Replies
View Related
Apr 8, 2011
Both MP4 and OGV playback completely weird on my Ubuntu 10.04.2 laptop:
The resolution/length/etc is correct, but the picture is all weird. Webm doesn't work at all.
I tried mplayer, kmplayer, smplayer, gxine, totem and kplayer. All the same.
However, the exact same video's play back normally in HTML5 pages with a bunch of browsers on the same machine. They also play back normally on a Windows machine. There is no DRM involved.
Aren't these gstreamer en mplayer based players supposed to handle this correctly?
This is an Intel Core i3 machine with Intel HD graphics.
View 9 Replies
View Related
May 18, 2011
i am loving the ubuntu 10.10 interface.my laptop is a toshiba satellite l450 (3gb ram + 2.10ghz amd proc essor. i use a ati radeon hd 3200 graphics card.i have to manually adjust the sound settings if i plug in a headphone or a hdmi cable to suit the necessary output. windows did this automatically.my video quality is very very poor. if i run videos on any browser or watch a movie (avi file) on totem or vlc it is very jumpy and the sound is often out of sync.
View 1 Replies
View Related
Jan 13, 2010
I recently just installed Ubuntu on this laptop and I have a issue with playing back videos on my LAN server.
Thing is, I've got another computer too where it works flawlessly so I was wondering what causes this on my laptop...
I mount the FTP location and I get access to all the files on the server. On my other computer, I can basically just click any video file and it would act as it would if it was on my HDD already, but when I try to do that on my laptop it will not play the video file at all.
I've tried several media players too, but I usually just use VLC so here is the VLC error:
Code:
And then ask if I want to repair it. However, once I drag the file over to my desktop it works.
So why won't my media players read video files over FTP?
And the whole "Connect to server" is acting a little weird. If I try to use the DNS of the server instead of the local IP I will not get any response. However, using the DNS in other applictions do work.
View 2 Replies
View Related
Jan 15, 2010
I have a Dell Latitude CPi that has 400MHz Intel Processor and 256 MB of ram. It has a Neomagic Corporation NM2360 [MagicMedia 256ZX]. I have it set to 16 bit color depth and it is using the neomagic driver. My problem is that it cannot play any video of any size flash, or saved to hard drive. It has a fps so low that I can see it rendering each frame going across the screen. It doesn't seem to have a problem with animated pictures, just actual video files. I don't know whether or not this matters but the card set is known to not support 3d acceleration. I can run any commands in terminal and have a good understanding of the linux environment. This problem has occurred under Ubuntu and Xubuntu and still happens if I use a light weight WM like fluxbox.
View 2 Replies
View Related
Jan 23, 2010
I'm having some problems with flash in mozilla and chrome. video playback is fine but none of the buttons are working.for example i cant pause or change the volume. pretty sure my flash is up to date. i have ubuntu netbook remix on another pc without this same problem.
View 8 Replies
View Related
Feb 21, 2010
When trying to playback DVDs in VLC media player, I have to switch the video output driver to get any playback.If I leave it on "Default" (which I think is defaulting to "XVideo Extension Video Output"), I get a solid green or blue screen (which I also get with "Xvideo Extension Video Output")If I switch it to "OpenGL Video Output", I get proper DVD playback but it is kind of pixelated and ugly.If I switch it to "X11 Video Output", I get DVD playback that is very crisp and sharp, the image quality is great.unfortunately, the colors are completely messed up and the blue is completely saturated.I've played with the color settings (especially the Hue setting), but I can't get the colors to look right.
I'd really like to use the x11 video output since the quality is the best, but I can't get the colors right.the first one (Screenshot.png) is OpenGL output, and the second (Screenshot-1.png) is X11 output.It's also worth noting that I am on an IBM ThinkPad R32 with an ATI Mobility Radeon 7000 (or M6, or M6 LE, whatever you wanna call it).I'm running a fully updated 9.04 Jaunty installation.
View 7 Replies
View Related
Apr 3, 2010
I've installed Ubuntu 9.10 and the prime reason for giving it a go is due to the media center capability with apps such as Moovida and LinuxMce.
Unfortunately during video playback [either divx or flash] there appears to be a random line or lines which flickers on the screen when the video is in fullscreen mode.
I'm using an ATI x1900 video card and have tried using both Tote and VLC, and I have also tried installing the fglrx.
But, both with and without flgrx installed, under the section 'Device' in xorg.conf it says that the driver is 'vesa'.
I don't know how to disable the default ATI driver to enable fglrx, or whether I am going off on completely the wrong tanget and should be looking at something else.
Or is there better support for my type of card in Ubuntu 10 as I don't want to go back to Ubuntu 8 which is the last supported version of the os that ATI developed a driver for my card.
View 1 Replies
View Related
Apr 26, 2010
I have a 30" LCD with 2560x1600 pixel resolution. I would like to make and play videos at this resolution, but software decode is too slow, and the GPU accelerated decode (VDPAU) maxes out at 2048 pixels. It might be possible to decode 2Kx2K and cut-and-paste and reorganize the rectangles to fill 2560x1600. But someday I plan on getting a 4K screen (4096x2160 pixels) and I would like to support that too. For that it seems two video streams decoded by two GPUs and exactly synchronized would work.
View 1 Replies
View Related
