Does anyone out there know of a Open Source, Free, Linux solution that would mimic the Citrix server/thin client model? I have an office of 20 laptops, that I would like to put a thin client on, and offer 20 windows desktops to them through it. Can anyone think of a way to accomplish this?
View 1 RepliesI have fedora 11, and installed citrix ica client from the citrix website, but it does not seem to be working. Basically nothing happens instead of launching. I have also installed "terminal server client" (which does work except for the citrix ica connection part of it). In this program when you go to the option "Add connection", then there is an option that says "Citrix ICA connection". It used to be greyed out before I installed the citrix client from the citrix website. Now it is not greyed out but nothing happens when you click on it (also no error messages). I also tried going on the hard drive to '/usr/lib/ICAClient/wfica' and also to "/usr/lib/ICAClient/wfcmgr" and manually trying to launch those executable files but nothing happens there as well.
View 7 Replies View RelatedI am trying to access my work website and I have to use a citrix xen app to get there. I found the linux version of the app, but when I hit the inside.healthsouth logo, I get a client error message.
View 6 Replies View RelatedEverytime I install citrix deb client and log in to the citrix address on Firefox, it wouldnt let me in and gives me this full error message in a pop up box.
You have not chosen to trust "GlobalSign Domain Validation CA", the issuer of the server's certificate (SSL error 61)
I am struggling to install Citrix and I cant understand the Howto in ubuntuforums. I get this long as seen on the print screen
View 4 Replies View RelatedHas any one been able to run Citrix applications on OpenSuse 12.1 ? I have installed the ICA client and the required openmotif, but when i try to start an app, it splashes the Citrix Logo then dies and no err.msgs is shown assist if you managed to get this working
View 1 Replies View RelatedWhat's the best Remote Desktop Application? Citrix GoToAssist is a really nifty little web application for customer support that allows you to take control of someones OSX, or Windows machine. Essentially, it works likes this:
You log in to your management console You get a code You give them a code, and a website (fastsupport.com) They go there and enter in the code They accept the browser applet which installs a program on their computer You have control of their desktop
You can see their desktop, configure applications, etc. They can also see when you disconnect. It is really rather nifty, but it doesn't support Linux and it is rather expensive (660$ a year). Does anyone know of any alternatives to this? I'm looking for a solution as simple on the user as this one, that doesn't require firewall configuration or setting up ssh/vnc/rdesktop etc.
I just installed Citrix to my computer but when I try to use it I get an error message saying:
"You have not chosen to trust "Equifax Secure Global eBusiness CA-1", the issuer of the server's security certificate (SSL error 61)."
So I downloaded the certificates to allow me to use it but I am unable to copy them to the /usr/lib/ICAClient/keystore/cacerts/ directory, I cant download them straight to that folder either. I have administrative privileges but still I cant do anything with the files in those folders other than look at them. How to put files in those folders?
I have been using citrix to log into work for quite some time now. Recently I ran into a problem where the keyboard stops working after some time. The link below from a citirx forum describes the issue.The work-round is to edit the file config/module.ini below the client's installation directory (usually /usr/lib/ICAClient)ind the line "UseLocalIM=True" and change the value to "False".My issue is that this a root file and I don't want to compromise my system.So my question is should I try this and if so could somebody lead me by the hand as to how; using the sudo and I believe chmod command
View 2 Replies View RelatedWhich is the best way to install citrix ICA client under Lenny?
View 4 Replies View RelatedHow to go about in this situation with a 64-bit version of Lucid, and XenApp? Citrix only has 32-bit packages available on their web, and previously with Karmic, you just added some 32-bit libs, and it would work. But now the "GDebi Pack*ager Installer" refuses to do the install, since this is a 32-bit package, and throws you this error: "Error: Wrong architecture 'i386'". Anyone out there that has managed to find a workaround to install this?
View 8 Replies View RelatedI get a wrong architecture error when I try to install the .deb .A fully 32 bit enabled install of Ubuntu 10.10 86-64 on a D525 Atom based system does not seem to work at all. It will not install with gdebi or the new Ubuntu software centre.I have the 32 bit required OpenMotif libs installed...and all the other stuff that is i386 arch works perfect. I really want to run the 64 bit os but perhaps I can dual boot it with Fedora 32. There is nothing in the asus bios of the board that says emulate i386 like with AMD 64 chips...I thought that the D525 atom was fine as it will run 32 bit XP or any 32 bit linux.
So what might be the trouble with running 32 bit software on Ubuntu 10.10 64 on this machine? Why does the Ubuntu hacked gdebi software install system insist that i386 software is the wrong arch for this intel atom?This is really maddening as my wife's work demands this citrix client, and the last thing that I want to do is run out and buy an oem of Windows 7.been there done that with 98, XP, and Vista I am looking to ditch her noisy POS vacuum cleaner vista machine..but I cannot do it until I have the linux citrix client installed and working.
Howto install citrix client from:
[URL]
automatically, without asking for anything?
If I try:
Code:
# dpkg -i icaclient_11.100_i386.patched.deb
then I get a window with the LICENSE AGREEMENT.
As Xen is based on LINUX I'm hoping that someone out there could help me. I'm struggling with 802.3ad on a cisco switch (LACP). I'm going to be using this for my storage network on a dedicated cisco switch talking to a teamed pair of intel NIC's ISCSI storage. From the intel side I can set them to Link aggregated one team 2GB this is fine and my config shows active active on the NICs. How would I go about doing this from a LINUX box. In order to remove any bottle necks it needs to be active active from Xen. If I do a pif-forget uuid= on a XEN server I'm in complete control using Linux.
View 9 Replies View RelatedI am currently working on a Diskless Fedora10 based PXE image that should auto login and then launch the ICA client without launching the desktop (so normal autostart will not cut it)I have got the image up and running, the clients boot correctly, autologin etc, but still launch KDE, and I was hoping replace the desktop with the ICA Client.
View 1 Replies View RelatedI have installed a Citrix Client but to get it to function I need to copy a Certificate to /usr/lib/ICAClient/keystore/cacerts but my problem is I do not have a clue on how to find /usr/lib/ICAClient/keystore/cacerts
View 1 Replies View RelatedI have installed Citrix Xen-Server on my server and managed to install Windows 2003 R2 Server successfully.I also installed CentOS 5.3. The installation went fine, however, I cannot get Gnome or KDE going. I only have the text interface.
View 2 Replies View RelatedI have Slackware64 13.1 with multilib enabled. I downloaded the Citrix Client Receiver 11 from [URL] (it is available for 32 bit architectures only). I followed the installation instructions and all went fine. I even installed openmotif from slackbuilds.org repository as a dependency. When i tried to do:
Code:
bash-4.1$ ldd /usr/lib/ICAClient/wfcmgr
linux-gate.so.1 => (0xffffe000)
libXm.so.4 => not found
libXp.so.6 => /usr/lib/libXp.so.6 (0xf76e5000)
libXpm.so.4 => /usr/lib/libXpm.so.4 (0xf76d5000)
[Code].....
i have installed solaris 10, on solaris i have deploy citrix xennapp 4.0 (Unix Version). installation complete successfully,but now i want to publish an application on citrix for publishing application on citrix there is command #ctxappcfg when i run above command in terminal below error showingctxappcfg: not foundso anyone has publish application on citrix plz let me know how to deal with above error tried searching google but there is no much information on citrix.
View 1 Replies View RelatedHave extensively Googled and searched on here, but with no success. We have a MYPC service at our company, but our support staff have been well trained in the phrase..."we do not offer support for Linux", but the MYPC service that we have did work recently under Ubuntu 9.04 that I had at home, however since upgrading both my laptop and desktop to 10.10 and 10.4 respectively, neither now work when I use the Citrix 11 Receiver client.
I get; "You have not chosen to trust "GeoTrust Global CA", the issuer of the server's security certificate (SSL error 61." So I got, what I thought were the relevant certificates from [URL].. tes/index.html (see image for a list of certificates) but still no joy. whilst I don't want to call my support department, I wonder if they have taken a conscious decision to block access to the MYPC system from anything other than Windows OSs?
I have problem with XEN Citrix server I can not understand ; what is sda2 and sda3 partitions ?
Code:
root@cl-500 ~]# fdisk -l
Disk /dev/sda: 2000.4 GB, 2000407625728 bytes
64 heads, 32 sectors/track, 1907737 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
[Code]...
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies View RelatedIs there a way to clone a partition (40GB) and put it on another partition (on a another hdd) with the size of 20GB? The partition that is cloned is using only 3 GB of 40 GB.
View 2 Replies View RelatedIs there a straight forward way to clone my F13 workstation for the purpose of setting up a new computer quickly? Looking for the best approach to pursue.
View 9 Replies View RelatedI was thinking about make a clone machine. I was thinking about use a old computer that have some SATA connection. One disk is source and then I add some other disk to destination. I going to have Linux on USB stick. I have look at dd and it look nice but what I can see it only use one disk to another.
Code:
dd if=/dev/hdx of=/dev/hdy
is it possible to add more then one destination?
I have linux installation which is on USB flash drive...there are two partitions. how to clone it to another USB. I tried manualy creating partitions on new flash drive and manualy copyng files but this doesn't work.
View 2 Replies View RelatedA linux cvs server is of 250 GB, I have to replace all data to a new 500 GB hdd with intact of data. How will I do that?
View 11 Replies View RelatedI Have a Red hat 9 Installed in our Site With 5 Partitions Which work's as a Server for 3 clients .I wanted to clone the entire H.D.D of the system to a new one, So then if i have a problem i can restore it back.For Example I use Nortron Ghost for Windows Systems( but Without Portions)
View 11 Replies View RelatedI'd like to be able to clone a tagged module, but have not succeeded with this attempt:
Code:
Does anyone know if it is possible to clone/copy tags like this at all? Or must I find another way of doing this?
Currently my server use SAS 146G 10K. This hdd is in mirror mod. But space in current hdd is not enough. So, my plan is clone current hdd to other SAS 300G 10K.
View 1 Replies View Related