I have been using citrix to log into work for quite some time now. Recently I ran into a problem where the keyboard stops working after some time. The link below from a citirx forum describes the issue.The work-round is to edit the file config/module.ini below the client's installation directory (usually /usr/lib/ICAClient)ind the line "UseLocalIM=True" and change the value to "False".My issue is that this a root file and I don't want to compromise my system.So my question is should I try this and if so could somebody lead me by the hand as to how; using the sudo and I believe chmod command
I have fedora 11, and installed citrix ica client from the citrix website, but it does not seem to be working. Basically nothing happens instead of launching. I have also installed "terminal server client" (which does work except for the citrix ica connection part of it). In this program when you go to the option "Add connection", then there is an option that says "Citrix ICA connection". It used to be greyed out before I installed the citrix client from the citrix website. Now it is not greyed out but nothing happens when you click on it (also no error messages). I also tried going on the hard drive to '/usr/lib/ICAClient/wfica' and also to "/usr/lib/ICAClient/wfcmgr" and manually trying to launch those executable files but nothing happens there as well.
I have upgraded my laptop to 10.04 while having my usb-keyboard plugged in.f I boot the laptop without a plugged in keyboard, the laptop keyboard is not working. It starts working as soon as I plug a usb-keyboard in though.Quite annoying if I take my laptop with me and the first thing after booting is to find a usb-keyboard to plug in Does anyone know where can I reconfigure this? [edit]I just found out, that the laptop keyboar seems to be in numlock mode... meaning that the keys [j,k,l] is mapped to [1,2,3] etc
I am trying to access my work website and I have to use a citrix xen app to get there. I found the linux version of the app, but when I hit the inside.healthsouth logo, I get a client error message.
Everytime I install citrix deb client and log in to the citrix address on Firefox, it wouldnt let me in and gives me this full error message in a pop up box.
You have not chosen to trust "GlobalSign Domain Validation CA", the issuer of the server's certificate (SSL error 61)
I just installed Citrix to my computer but when I try to use it I get an error message saying: "You have not chosen to trust "Equifax Secure Global eBusiness CA-1", the issuer of the server's security certificate (SSL error 61)."
So I downloaded the certificates to allow me to use it but I am unable to copy them to the /usr/lib/ICAClient/keystore/cacerts/ directory, I cant download them straight to that folder either. I have administrative privileges but still I cant do anything with the files in those folders other than look at them. How to put files in those folders?
How to go about in this situation with a 64-bit version of Lucid, and XenApp? Citrix only has 32-bit packages available on their web, and previously with Karmic, you just added some 32-bit libs, and it would work. But now the "GDebi Pack*ager Installer" refuses to do the install, since this is a 32-bit package, and throws you this error: "Error: Wrong architecture 'i386'". Anyone out there that has managed to find a workaround to install this?
I get a wrong architecture error when I try to install the .deb .A fully 32 bit enabled install of Ubuntu 10.10 86-64 on a D525 Atom based system does not seem to work at all. It will not install with gdebi or the new Ubuntu software centre.I have the 32 bit required OpenMotif libs installed...and all the other stuff that is i386 arch works perfect. I really want to run the 64 bit os but perhaps I can dual boot it with Fedora 32. There is nothing in the asus bios of the board that says emulate i386 like with AMD 64 chips...I thought that the D525 atom was fine as it will run 32 bit XP or any 32 bit linux.
So what might be the trouble with running 32 bit software on Ubuntu 10.10 64 on this machine? Why does the Ubuntu hacked gdebi software install system insist that i386 software is the wrong arch for this intel atom?This is really maddening as my wife's work demands this citrix client, and the last thing that I want to do is run out and buy an oem of Windows 7.been there done that with 98, XP, and Vista I am looking to ditch her noisy POS vacuum cleaner vista machine..but I cannot do it until I have the linux citrix client installed and working.
Does anyone out there know of a Open Source, Free, Linux solution that would mimic the Citrix server/thin client model? I have an office of 20 laptops, that I would like to put a thin client on, and offer 20 windows desktops to them through it. Can anyone think of a way to accomplish this?
Has any one been able to run Citrix applications on OpenSuse 12.1 ? I have installed the ICA client and the required openmotif, but when i try to start an app, it splashes the Citrix Logo then dies and no err.msgs is shown assist if you managed to get this working
What's the best Remote Desktop Application? Citrix GoToAssist is a really nifty little web application for customer support that allows you to take control of someones OSX, or Windows machine. Essentially, it works likes this:
You log in to your management console You get a code You give them a code, and a website (fastsupport.com) They go there and enter in the code They accept the browser applet which installs a program on their computer You have control of their desktop
You can see their desktop, configure applications, etc. They can also see when you disconnect. It is really rather nifty, but it doesn't support Linux and it is rather expensive (660$ a year). Does anyone know of any alternatives to this? I'm looking for a solution as simple on the user as this one, that doesn't require firewall configuration or setting up ssh/vnc/rdesktop etc.
As Xen is based on LINUX I'm hoping that someone out there could help me. I'm struggling with 802.3ad on a cisco switch (LACP). I'm going to be using this for my storage network on a dedicated cisco switch talking to a teamed pair of intel NIC's ISCSI storage. From the intel side I can set them to Link aggregated one team 2GB this is fine and my config shows active active on the NICs. How would I go about doing this from a LINUX box. In order to remove any bottle necks it needs to be active active from Xen. If I do a pif-forget uuid= on a XEN server I'm in complete control using Linux.
need to press each key for a second before it is seen but login does fine in password. I saw a sticky key warning but pressed "cancel" before this started.
I have a Dell Studio XPS desktop 435MT, with Ubuntu 9.1 64 bit version. There is no ps/2 port in this computer. It worked perfectly fine until yesterday I switched it on and my keyboard lights switch on, but no key pressed works from the very beginning Dell BIOS screen! I have tried to use LiveCD but keyboard doesn't work even there, so it automatically selects english and loads from cd... once it installs the livecd version and loads it, the keyboard starts working again (good thing as I recovered my data). I have also tried inserting norton ghost or other dell setup cds but don't work because a key needs to be pressed and so goes on loading grub (which doesn't work). I will try to fresh install from the terminal screen of the livecd ubuntu.
I don't think I could be much newer to Ubuntu (I only started using it properly an hour ago) and I'm having trouble with the keyboard shortcuts. Nothing happens when I press alt-f2 to run terminal, or ctrl-alt-tab to switch workspaces. I also cannot use the fn keys to dim the screen, change the volume etc
my keyboard has gone very strange, the shift key is not working, and when i press "t" i get rt. when i press "y" i get "uy" all was fine - have had ubuntu for several months, but last few weeks been strange. software centre no longer works, and cannot "unlock" on ubuntutweak. also my bluetooth dongle has stopped working are all these problems connected? i have reinsrtalled rthe sofrtware cenrtre and ubunrtu rtweak burt rto no avail
Ubuntu 9.04Dell desktop pcKeyboard stopped workingI was in the middle of an emailwhen my keyboard stopped working.I rebooted.Keyboard worked for Windows Vista.Keyboard worked for Ubuntu login.But once in Ubuntu no keyboard.Mouse works fine. think I may have accidentally touchedthe control key when doing the email
I can log into ubuntu using my keyboard and mouse but about 5 seconds after I hit enter my mouse quits working. Keyboard still works so I can open terminal and use all keyboard. But, if I hit the touchpad toggle button over and over again many many times in a row, the mouse will start to work and my keyboard stops. I don't know what my course of action is to fix this strange problem. It just started today.
So my computer was slow with Karmic Koala, so I tried upgrading my build to Lucid Lynx 10.04.
Now I can't login because neither my keyboard nor mouse (and touch-pad) work. However, I can access the command mode (terminal?) though through the grub boot menu.
how I can get my mouse (and touch-pad) and keyboard to work with Ubuntu 10.04? My machine is an Acer Aspire 4730Z. I dual boot with Windows 7, and I'd prefer not to have to clear out the partition for Linux and reinstall.
I messed up my xorg.conf and tried to put in a clean one, but it doesn't seem to work. I'm not sure what went wrong. When X loads, the mouse cursor is not responding and my keyboard is dead too. I can't toggle to text mode either (Alt-Ctrl-F1).Hope the following files might explain what's wrong./var/log/Xorg.0.log
Code: [ 26.835] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 26.840] (II) No input driver/identifier specified (ignoring)
i recently installed ubuntu on my lenovo Y500 laptop and later found that my laptops keyboard is not working. But when i tried using ubuntu before installing it via my pendrive everything seemed to work perfectly.
When I boot up a few things are different than before the last update:
grub no longer does the 10 second countdown the ubuntu splash screen has changed to some wierd text version "Ubuntu 10.10" when the boot is finished nothing works on my laptop (keyboard, mouse, integrated touchpad mouse thing...). I am able to get the mouse to work by unpluging it from the usb port and plugging it back in.
applications seem to work fine, (thunderbird, firefox, etc) the ony ploblem is that I have no way of typing anything... Also i have a keyboard icon that was never there before that puts my keyboard in USA mode (it has always been set to french since my install.
I have a dual boot vista/maverick on an Acer Aspire 5100 laptop.
This is the first time I've got a major problem with Ubuntu (I started with version 5), and this one is particularly frustrating.I'm running Ubuntu 11.04 on my old (2007) desktop PC.Occasionally, but more and more often now, the keyboard just stops working. The mouse is still fine. When I shut down, I would sometime notice that the "stop crash report generation" process fails. Then the shutdown sequence stops at some point, and I am forced to do a hard shutdown, power down for a while, and reboot. If I don't wait after power off, the keyboard freeze would occur again at any time during the start up sequence. I even had a keyboard freeze after manually switching to the Windows boot.
After running the most-recent ubuntu update, several keys on my laptop stopped working when running ubuntu. The non-working keys are: J, K, L, M, N, O, I, U, P, 8, 9, and 0. (All the keys do work properly when the laptop is running Windows XP or PuppyLinux 4.2.1.) how to restore the keys? I am running ubuntu 10.10 on a Panasonic CF-W5 laptop.
I am currently working on a Diskless Fedora10 based PXE image that should auto login and then launch the ICA client without launching the desktop (so normal autostart will not cut it)I have got the image up and running, the clients boot correctly, autologin etc, but still launch KDE, and I was hoping replace the desktop with the ICA Client.
