Ubuntu Installation :: Citrix ICA Xen App On 64bit Lucid
May 4, 2010
How to go about in this situation with a 64-bit version of Lucid, and XenApp? Citrix only has 32-bit packages available on their web, and previously with Karmic, you just added some 32-bit libs, and it would work. But now the "GDebi Pack*ager Installer" refuses to do the install, since this is a 32-bit package, and throws you this error: "Error: Wrong architecture 'i386'". Anyone out there that has managed to find a workaround to install this?
View 8 Replies
ADVERTISEMENT
Jul 16, 2009
I have fedora 11, and installed citrix ica client from the citrix website, but it does not seem to be working. Basically nothing happens instead of launching. I have also installed "terminal server client" (which does work except for the citrix ica connection part of it). In this program when you go to the option "Add connection", then there is an option that says "Citrix ICA connection". It used to be greyed out before I installed the citrix client from the citrix website. Now it is not greyed out but nothing happens when you click on it (also no error messages). I also tried going on the hard drive to '/usr/lib/ICAClient/wfica' and also to "/usr/lib/ICAClient/wfcmgr" and manually trying to launch those executable files but nothing happens there as well.
View 7 Replies
View Related
Jul 21, 2010
I am going to upgrade from Lucid 32-bit to Lucid 64-bit, and I have some questions as to what I need to do. My system is a dual boot of XP and Lucid, but I only use XP rarely nowadays. I know I have to do a clean install, so here goes. Do I have to blow away my current install of Lucid? If the answer to (1) is yes, what about Grub? How do I get a list of my currently installed applications?
Currently Lucid is on one partition. I have a Clonezilla copy of the file system. Can I restore the /home directory from that copy once I have installed the 64-bit system? If I decide to make /home a separate partition, are there any good rules of thumb about how much space to allocate to the various partitions? Are there any other directories or files I should consider copying from the Clonezilla copy?
View 8 Replies
View Related
Jun 18, 2010
I've just upgraded to 64-bit Lucid and then tried to access the BBC iplayer. I got a message saying I needed a newer version of Flash, so I followed the link provided to the Adobe web site. However, there doesn't seem to be a 64-bit version available from there.
I'm sure I'm not the first person to have had this problem, but I couldn't find an obvious thread on it among the many flash-related ones, so how do I get a recent version of Flash installed in 64-bit Ubuntu 10.04? Have Adobe stopped creating 64-bit versions, or do they just not do a good job of identifying the architecture?
View 4 Replies
View Related
May 6, 2011
I preface this by saying that all other forms of CDs and DVDs work perfectly in this machine - the problem relates exclusively to Audio CDs, either burnt or bought.
When I put and Audio CD in the drive, the mounting process starts, takes longer than usual, and during this process, the desktop icons flash off then back on again, then the CD mounts and I get an icon on the desktop.
If I right-click and select Open, the desktop icons flash off and on again, and nothing else happens.
If I right-click and select Open with Rhythmbox, the same thing happens - desktop icons flash off and on, and nothing else happens. Rhthymbox is not listed in the active processes either.
If I open Movie Player, and click on Movie in the menu, the Play disc 'Audio disc' option is greyed out.
If Rhythmbox is running, and I insert an Audio CD in the drive, Rhythmbox crashes and won't start again until I remove the Audio CD, then all is well again.
When I select Eject to remove the Audio CD, the desktop icons flash off and on again, then the CD ejects.
View 4 Replies
View Related
May 15, 2011
camstream worked fine with Ubuntu 8.04 LTS 64bit Since I installed 10.04.2 LTS 64bit , camstream is freezing when it opens the webcam. I have to kill it to end the freezing. No change in hardware.
Any solution? (or other software I can use to upload snapshots from webcam to my server)
View 5 Replies
View Related
Apr 30, 2010
I've been having problems with the Songbird client that we normally download from repositories. It is slow, unstable, and crashes a lot. So I finally figured out that if you download the latest developer version, it is fast, stable, and hasnt crashed yet! The only downside is not all plugins are compatible, but it is still awesome to use, its my favorite audio player in Ubuntu. [URL]
View 3 Replies
View Related
May 2, 2010
i really need to install flash but i don't know how to on 64bit ubuntu 10.04
View 1 Replies
View Related
May 3, 2010
just updated to lucid and i went to install medibuntu and following the instructions on this page [URL] just like i did in Karmic but after i have done everything that i had to do in Karmic to get it to work i tried to play a dvd in totem and it pops up and says
The required software to play this file is not installed. You need to install suitable plugins to play media files. Do you want to search for a plugin that supports the selected file?
The search will also include software which is not officially supported.
No packages with the requested plugins found
The requested plugins are: DVD subpicture decoder
I click ok and then the dvd starts to play and says internal data flow error
View 9 Replies
View Related
Jul 23, 2010
The current libsasl package on 64bit Lucid is libsasl2-2 (2.1.23). However when I was installing Scalix, it needed 32bit libsasl2 which is 2.1.22 or something old. Although I can download 32bit libsasl2 package from web, it requires a lot of other libs and some of them are not available.So my question is: is it possible to install an old 32bit package on Lucid 64bit? Or are there other ways to solve the problem without installation of new packages?
View 2 Replies
View Related
Oct 11, 2010
Ubuntu 10.04 how stable are the lucid-proposed and lucid-backports options in the software sources settings?
View 4 Replies
View Related
Apr 30, 2010
What's the procedure for updating from Lucid Beta 2 to Lucid LTS? Is it just "apt-get upgrade"? Or would I be better off with a clean install?
View 2 Replies
View Related
May 12, 2011
I am trying to access my work website and I have to use a citrix xen app to get there. I found the linux version of the app, but when I hit the inside.healthsouth logo, I get a client error message.
View 6 Replies
View Related
May 9, 2010
I recently upgraded from Karmic to Lucid via the Update Manager. I would like to upgrade further by switching from 32 Bit to 64 Bit. I downloaded the Lucid 64 Bit ISO and wrote an install disk. When I reboot the computer with the install disk nothing happens.
View 2 Replies
View Related
Nov 13, 2010
Everytime I install citrix deb client and log in to the citrix address on Firefox, it wouldnt let me in and gives me this full error message in a pop up box.
You have not chosen to trust "GlobalSign Domain Validation CA", the issuer of the server's certificate (SSL error 61)
View 3 Replies
View Related
Nov 30, 2010
I am struggling to install Citrix and I cant understand the Howto in ubuntuforums. I get this long as seen on the print screen
View 4 Replies
View Related
May 28, 2010
I just installed Citrix to my computer but when I try to use it I get an error message saying:
"You have not chosen to trust "Equifax Secure Global eBusiness CA-1", the issuer of the server's security certificate (SSL error 61)."
So I downloaded the certificates to allow me to use it but I am unable to copy them to the /usr/lib/ICAClient/keystore/cacerts/ directory, I cant download them straight to that folder either. I have administrative privileges but still I cant do anything with the files in those folders other than look at them. How to put files in those folders?
View 3 Replies
View Related
Sep 1, 2011
I have been using citrix to log into work for quite some time now. Recently I ran into a problem where the keyboard stops working after some time. The link below from a citirx forum describes the issue.The work-round is to edit the file config/module.ini below the client's installation directory (usually /usr/lib/ICAClient)ind the line "UseLocalIM=True" and change the value to "False".My issue is that this a root file and I don't want to compromise my system.So my question is should I try this and if so could somebody lead me by the hand as to how; using the sudo and I believe chmod command
View 2 Replies
View Related
Mar 23, 2011
I get a wrong architecture error when I try to install the .deb .A fully 32 bit enabled install of Ubuntu 10.10 86-64 on a D525 Atom based system does not seem to work at all. It will not install with gdebi or the new Ubuntu software centre.I have the 32 bit required OpenMotif libs installed...and all the other stuff that is i386 arch works perfect. I really want to run the 64 bit os but perhaps I can dual boot it with Fedora 32. There is nothing in the asus bios of the board that says emulate i386 like with AMD 64 chips...I thought that the D525 atom was fine as it will run 32 bit XP or any 32 bit linux.
So what might be the trouble with running 32 bit software on Ubuntu 10.10 64 on this machine? Why does the Ubuntu hacked gdebi software install system insist that i386 software is the wrong arch for this intel atom?This is really maddening as my wife's work demands this citrix client, and the last thing that I want to do is run out and buy an oem of Windows 7.been there done that with 98, XP, and Vista I am looking to ditch her noisy POS vacuum cleaner vista machine..but I cannot do it until I have the linux citrix client installed and working.
View 1 Replies
View Related
Apr 15, 2011
Does anyone out there know of a Open Source, Free, Linux solution that would mimic the Citrix server/thin client model? I have an office of 20 laptops, that I would like to put a thin client on, and offer 20 windows desktops to them through it. Can anyone think of a way to accomplish this?
View 1 Replies
View Related
Aug 24, 2011
Has any one been able to run Citrix applications on OpenSuse 12.1 ? I have installed the ICA client and the required openmotif, but when i try to start an app, it splashes the Citrix Logo then dies and no err.msgs is shown assist if you managed to get this working
View 1 Replies
View Related
Jun 3, 2010
What's the best Remote Desktop Application? Citrix GoToAssist is a really nifty little web application for customer support that allows you to take control of someones OSX, or Windows machine. Essentially, it works likes this:
You log in to your management console You get a code You give them a code, and a website (fastsupport.com) They go there and enter in the code They accept the browser applet which installs a program on their computer You have control of their desktop
You can see their desktop, configure applications, etc. They can also see when you disconnect. It is really rather nifty, but it doesn't support Linux and it is rather expensive (660$ a year). Does anyone know of any alternatives to this? I'm looking for a solution as simple on the user as this one, that doesn't require firewall configuration or setting up ssh/vnc/rdesktop etc.
View 2 Replies
View Related
Jan 26, 2011
Which is the best way to install citrix ICA client under Lenny?
View 4 Replies
View Related
Mar 1, 2011
Howto install citrix client from:
[URL]
automatically, without asking for anything?
If I try:
Code:
# dpkg -i icaclient_11.100_i386.patched.deb
then I get a window with the LICENSE AGREEMENT.
View 4 Replies
View Related
Apr 16, 2010
As Xen is based on LINUX I'm hoping that someone out there could help me. I'm struggling with 802.3ad on a cisco switch (LACP). I'm going to be using this for my storage network on a dedicated cisco switch talking to a teamed pair of intel NIC's ISCSI storage. From the intel side I can set them to Link aggregated one team 2GB this is fine and my config shows active active on the NICs. How would I go about doing this from a LINUX box. In order to remove any bottle necks it needs to be active active from Xen. If I do a pif-forget uuid= on a XEN server I'm in complete control using Linux.
View 9 Replies
View Related
Jan 20, 2010
I'm trying to install Kubuntu 9.10 on my machine (I had the same problem with Kubuntu 9.04). The machine is:
- Core 2 Quad 6600
- Nvidia 7600 GS
- Two disk seagate 500 in mirroring raid software
When I try to install Kubuntu, after disk partition, my system dosn't see the CD. He tell me to insert disk into drive but I doesn't touch it. I resolved this mounting an external hard disk into /cdrom. After this, the installation continues until the step "select and install software". At this step, the installation procedure tell me an error. During this error, in the other console, I've this:
Code:
Jan 19 21:58:09 in-target: Alcuni pacchetti non possono essere installati. Questo può voler dire
Jan 19 21:58:09 in-target: che è stata richiesta una situazione impossibile oppure, se si sta
Jan 19 21:58:09 in-target: usando una distribuzione in sviluppo, che alcuni pacchetti richiesti
[Code]....
View 3 Replies
View Related
May 22, 2009
I am currently working on a Diskless Fedora10 based PXE image that should auto login and then launch the ICA client without launching the desktop (so normal autostart will not cut it)I have got the image up and running, the clients boot correctly, autologin etc, but still launch KDE, and I was hoping replace the desktop with the ICA Client.
View 1 Replies
View Related
Jul 30, 2010
I have installed a Citrix Client but to get it to function I need to copy a Certificate to /usr/lib/ICAClient/keystore/cacerts but my problem is I do not have a clue on how to find /usr/lib/ICAClient/keystore/cacerts
View 1 Replies
View Related
Jan 2, 2010
I have installed Citrix Xen-Server on my server and managed to install Windows 2003 R2 Server successfully.I also installed CentOS 5.3. The installation went fine, however, I cannot get Gnome or KDE going. I only have the text interface.
View 2 Replies
View Related
Mar 30, 2011
I have Slackware64 13.1 with multilib enabled. I downloaded the Citrix Client Receiver 11 from [URL] (it is available for 32 bit architectures only). I followed the installation instructions and all went fine. I even installed openmotif from slackbuilds.org repository as a dependency. When i tried to do:
Code:
bash-4.1$ ldd /usr/lib/ICAClient/wfcmgr
linux-gate.so.1 => (0xffffe000)
libXm.so.4 => not found
libXp.so.6 => /usr/lib/libXp.so.6 (0xf76e5000)
libXpm.so.4 => /usr/lib/libXpm.so.4 (0xf76d5000)
[Code].....
View 9 Replies
View Related
